frameless glass commercial hardware indexs3-ap-southeast-2.amazonaws.com/resources.farm1... ·...

Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au

2009

3.1 Patch Fitting Price List3.4 Door Stops3.5 Pivot Poles3.6 Austvision Frameless Glass Pivot Door Spider Fittings3.7 Austvision 2 Way & 4 Way Spider Fittings3.9 Electric Locks3.10 Patch Locks3.13 Security Patch Locks3.14 Sliding Door Privacy Latch & Lock3.15 Lever Locks & Latch Sets3.16 Metro Door Rails & Accessories3.17 Austvision Door Rails3.18 Metro Floor Springs & Components3.19 Concealed Overhead Closers & Geze Floor Spring3.20 Geze Floor Springs3.21 Pull Handles3.25 Channel Sections3.26 Door Seals & Decal Vision Disc’s3.27 Patch Fitting Application Guide3.28 Patch Fitting Glass Preparation Drawings3.31 Pivot Pole & Spider Pivot Glass Preparation Drawings3.32 Spider Fitting Glass Preparation Drawings3.39 341.1 Patch Lock & 456 Profile Plunger Patch Lock Glass Preparation Drawing3.40 MP100, MP200 & MP220 Glass Preparation Drawings3.41 MP300 & MP320 Glass Preparation Drawings3.42 MP3570 Glass Preparation Drawing3.43 MP3582 Glass Preparation Drawing3.44 Sliding Door Latch/Lock/Flush Pull & Lever Lockset/Latch Set Glass Preparation Drawings3.45 Metro Door Rail Installation Details3.46 Austvision Door Rail Installation Details3.47 Metro Floor Spring Installation Details3.48 Metro COC Installation Details3.49 Geze GTS500 Floor Spring Dimensions3.50 Geze GTS550NV Floor Spring Dimensions

Frameless Glass Commercial Hardware Index

3.0


2009

Frameless Glass Commercial Hardware

3.1

Price List

All prices exclude GST

Patch Fittings suitable for 10mm & 12mm glass thickness

PRODUCT CODE DESCRIPTION NA SSS OR PSS

POWDER COAT*

MP24 TOP PIVOTwith mounting plate -

11.33

SSSonly

-

MP25 TOP PIVOTwith M8 threaded rod, washer & nut 17.63 - -

MP34

OVERPANEL TO WALLPATCH FITTING

with top pivot & wall bracket

(See page 3.28 for glass preparation)

101.88 105.54 105.54

MP34-180L180º OVERPANEL TO WALL OFFSET PATCH FITTING

Left & Right Handed


POA

Please check glass preparation & available finishes prior to ordering

NSIMP34-180R

MP40OVERPANEL TO SIDE PANEL PATCH

FITTING WITH TOP PIVOT


101.88 105.54 105.54

MP40-180L 180º OVERPANEL TO SIDE PANEL OFFSET PATCH FITTING

Left & Right Handed


POA


NSIMP40-180R

* Powder Coat colour as per standard range stated on page 1.23POA - Price On Application

NSI = Non Stock Item with 2-3 day lead-time into store + delivery


2009


3.2

Price List




POWDER COAT*

MP41-L OVERPANEL TO SIDE PANELPATCH FITTING

with fin mounting patch fitting & top pivotLeft & Right Handed


206.22 210.19 210.19

MP41-R

MP20TOP PATCH FITTINGfor use with fittings above


65.25 68.22 68.22

MP20-180L 180º TOP PATCH FITTING

Left & Right Handed


POA


NSIMP20-180R

MP22TOP PATCH FITTINGfor overhead transom closer


95.00 97.78 97.78

MP61OVERPANEL TO SIDE PANEL

OFFSET PATCH FITTING


92.56 95.95 95.95




2009


3.3

Price List




POWDER COAT*

MP70OVERPANEL PATCH FITTING

with two optional stops to suit double doors


66.16 69.37 69.37

MP28 TRANSOM MOuNT STOPfor single door 14.65 - -

MP10BOTTOM PATCH FITTING

For use with floorsprings, & pivot below


65.25 68.22 68.22

MP10-180L 180º BOTTOM PATCH FITTINGfor use with floorsprings, & pivot below

Left & Right Handed


POA


NSIMP10-180R

MP26-1STANDARD FLOOR PIVOT

Max. door weight 200kg

Please NoteClearances shown are to the top of the fixing plate, please add the appropriate thickness if this wont

be recessed.

5.5mm clearanceunder door

-33.93

SSSOnly

-

MP26-211mm

clearanceunder door

- -

MP26P5 PACkERS FORSTANDARD FLOOR PIVOT

5mm & 10mm Thick

5mm 17.50

MP26P10 10mm 22.50




2009


3.4

Price List


Door Stops

PRODUCT CODE DESCRIPTIONSatin

Chrome Finish

Polished Chrome Finish

MP32-1FLOOR MOuNT STOP

Cylinder Shape29.53 29.53


Quarter Sphere Shape4.59 4.59

MP32-2SFLOOR MOuNT STOP SPACER

To suit MP32-2

3.44 -


Quarter Sphere Shape7.65 7.65


Triangular Shape7.65 7.65

MP32-5WALL MOuNT STOP

Cylinder Shape11.48 -


2009


3.5

Price List


Pivot Poles for 10mm & 12mm Glass Thickness (See page 3.31 for installation details)PRODUCT CODE DESCRIPTION 316 SSS

MPP25METRO PIVOT POLE INSERT FOR MPP20

Ceiling Mounted42.89

MPP34 METRO OVERPANELPIVOT POLE INSERT TO SuIT MPP20 179.49

MPP40 METRO OVERPANEL TO SIDE PANELPIVOT POLE INSERT TO SuIT MPP20 328.97

MPP60 METRO OVERPANEL TO SIDE PANELPIVOT POLE ACCESSORy BRACkET 179.49

MPP20 METRO TOP PIVOT POLE 328.97

MPP10 METRO BOTTOM PIVOT POLE 328.97


2009


3.6

Price List


Austvision Door Spider Fittings in 316 Satin Stainless Steel (See page 3.31 for glass preparation)

PRODUCT CODE DESCRIPTION M8 Csk316 SSS

483 Transom Panel Pivot Door Spider

POA

NSI

452 Top Pivot Door Spider

485 Transom Spider Door Stop

451 Bottom Pivot Door SpiderUsed with floor spring or pivot

POA - Price On Application NSI - Non Stock Item with 2-3 day lead-time into store + delivery316 grade polished stainless steel finish also available


2009


3.7

Price List


Austvision Spider Fittings in 316 Satin Stainless Steel

PRODUCT CODE DESCRIPTION M10 Csk 32/22-22N 32/22-37N

445/44 WAy GLASS CONNECTOR

(See page 3.32 for dimensions & glass preparation)

POA

445/4/2 2 WAy 1 SIDEGLASS CONNECTOR

(See page 3.33 forglass preparation)

WithBackplate

445/4/2-WB Without Backplate

445/4/2y2 WAy GLASS CONNECTOR


445/4/1y 2 WAy 1 ARMGLASS CONNECTOR

(See page 3.34 fordimensions & glass preparation)

WithBackplate

445/4/1y-WB Without Backplate

445/22 WAy GLASS CONNECTOR


M10CD M10 CSk OuTER DISC (Ø50x6)

316 grade polished stainless steel finish also availableOther spider fittings available on request POA - Price On Application

The images above are only a representation, please see the referenced pages for detailsDepending on quantity ordered the above items can have a lead-time of up to 2 weeks into store + delivery


2009


3.8

Price List


Austvision Spider Fittings in 316 Satin Stainless Steel

PRODUCT CODE DESCRIPTION M10 Csk 32/22-22N 32/22-37N

445/2/1 2 WAy 1 ARMGLASS CONNECTOR

(See page 3.35 fordimensions & glass preparation)

WithBackplate

POA

445/2/1-WB Without Backplate

446/4M4 WAy GLASS CONNECTOR


446/2M2 WAy GLASS CONNECTOR


446/2M/11 WAy MODIFIED 446/2


446/4M/904 WAy GLASS CONNECTOR 90º


443/44 WAy GLASS CONNECTOR FOR SMALL

ELEVATIONS


M10CDM10 CSk INNER & OuTER DISC

(Ø50x6)

316 grade polished stainless steel finish also availableOther spider fittings available on request POA - Price On Application

The images above are only a representation, please see the referenced pages for detailsDepending on quantity ordered the above items can have a lead-time of up to 2 weeks into store + delivery


2009


3.9

Price List


Electric LatchesPRODUCT CODE DESCRIPTION PRICE

MES8070

ELECTRIC DOOR LATCH FOR12MM FRAMELESS GLASS

Designed for use with 90º one way opening 12mm toughened glass doors.

It has a unobstructive, ultra-slim design that will allow installation in very restricted amounts of space, particulary on the top of door frames.

To insure proper operation, please make sure that clearance “G” shown should be no more

than 5mm.

Power Input: 12VDC/250mA(Note: There is no polarity on power input)

Cutout size for frame and mounting instructions included with each latch.

Supplied with mounting brackets for metallic or aluminium door frame.

POA

NSI

MES145

ELECTRIC DOOR LATCH FOR 12MM FRAMELESS GLASS

DOORS TO SIDE OR OVERPANELS

Strike & housing for 12mm toughened glass doors and side or overpanels. Extruded Aluminium Housing with Adhesive glue

included.

Electric strike is released when power is applied. The strike will lock when the door

closes and the mating component engages with the jaw of the strike.

Power Input: 12VDC/195mA

Fail unlocked

Easy to install, mounting fixtures are required. Simply affix with glue provided.

Can be mounted independent of position.

Minimum Door Gap = 6mm

POA - Price On Application NSI - Non Stock Item


2009


3.9A

Price List


Electric StrikesPRODUCT CODE DESCRIPTION PRICE

MES1000

ELECTRIC DOOR STRIkE

• Power Input: 12VDC/200mA

• Simple Fail Safe/Fail Secure interchange, no loose pins

• Weather resistant

• Predrilled for extension lips

• Superior holding strength

• 4 Hour fire rated

• Mounting kit included

To reconfigure the door strike simply remove the springscrew and place the barbell as shown, replace the springscrew.

POA

NSI



2009

PRODUCT CODE DESCRIPTION PRICE

MES2002

(unmonitored)

MuLTIFuNCTIONELECTRIC DOOR STRIkE

• 12V & 24V DC Dual Voltage Continously Rated Coil

• Fully monitored including “strike securely installed within door frame” (anti-tamper)

• Simple Fail Safe/Fail Secure interchange, no loose pins

• Predrilled for extension lips

• Superior holding strength

• 4 Hour fire rated

• Mounting kit included

To reconfigure the door strike loosen the two screws and rotate the “Capstan” with the capstan tool in the required direction.

POA

NSI

MES2008

(Monitored)

Drop Bolt Size210mm L x 25mm W x 3-35mm H

Lock Bolt Head SizeDiameter : 12.7mm Depth: 14.5mm

MDB2654

ELECTRIC DROP BOLT

• Internal IC circuits to protect drop bolt head from damage

• Power to Lock (std) & Power to Open (on request)

• Auto Lock Function• Low Power Consumption• Built-In metal oxide varistor

(MOV) for surge protection• Time delay set at 0/3/6/10 sec• Anodised Aluminium Body• 12VDC

MDBP2655

DROP BOLT kEEPER PATCH WITH ANTI-TAMPER

GLASS HOuSING

Available in PSS Only

Specify left or right hand


3.9B

Price List


Electric Strikes



2009


Magnet Size238mm L x 48mm W x 25mm H

Armature Plate Size185mm L x 38mm W x 12mm H

MEML2600

ELECTROMAGNETIC LOCk

• 250-280kg single door

• Surface mount, mini type

• Dual Voltage 12/24VDC, 490/245mA

• Lock Status Sensor & LED indicator

• Power Off to release door

• Built-In metal oxide varistor (MOV) for surge protection

• Satin anodized aluminium housing and zinc plated electromagnetic lock body

POA

NSI

MEML2618

GLASS DOOR BRACkET FOR

ELECTROMAGNETIC LOCk

• This product uses a u channel housing to attach the armature plate to the glass door.

• Adjustable to suit 12mm, 10mm & 8mm Glass Thickness


3.9C

Price List


Electric Strikes



2009


3.10

Price List


Patch Locks

PRODUCT CODE DESCRIPTION NA SSS or Similar PSS

374

SLIDE-ON PATCH BOLT

No glass cut-out required

Specify 10mm or 12mm glass

POA - -

343.1

SLIDE-ON PATCH LOCk

No glass cut-out required


Complete with single sidedcylinder & keeper plate

POA - -

342.1

PATCH LOCk

Glass cut-out required


Complete with cylinder/snib & keeper plate


POA

NSI-

456

PROFILE PLuNGER LOCk

Glass cut-out required



-POA

NSI

For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder/Turn kA - keyed Alike kS - keyed SeperatelyPOA - Price On Application

NSI - Non Stock Item with lead-time of 2-3 days into store + delivery


2009


3.11

Price List


Patch Locks suitable for 10mm & 12mm glass thickness

PRODUCT CODE DESCRIPTION NA SSS PSS

MP100

BOTTOM PATCH LOCk

Includes cylinder & keeper


155.91 159.11 159.11

Mk240MP100/200 kEEPER PLATE

For Transom, Mullion or GroundInstallations with MP100 & MP200

- 14.65 -

MP200

CENTRE PATCH LOCk

Includes cylinders


155.91 159.11 159.11

MP220

CENTRE PATCH LOCk kEEPER

for MP200


71.25 74.45 74.45

For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder/Turn kA - keyed Alike kS - keyed Seperately


2009


3.12

Price List


Patch Locks suitable for 10mm & 12mm glass thickness

PRODUCT CODE DESCRIPTION NA or Mill SSS PSS

MP300BOTTOM OR CENTRE PATCH LOCk

Includes cylinders & long throw mortice lock210mm x 64mm with throw centre of 112.5mm


- 250.00 250.00

MP300HSLIDING DOOR PATCH LOCkIncludes cylinders & hook mortice lock(See page 3.41 for glass preparation)

- 300.00 300.00

MP300LEXIT LEVER CENTRE PATCH LOCk

Includes cylinders & mortice lockPlease specify handing & glass thickness


- 618.95 618.95

MP320CENTRE PATCH kEEPER

For MP300-1 & MP300L210mm x 64mm


- 130.97 130.97

MP320HSLIDING DOOR PATCH kEEPER

For MP300H(See page 3.41 for glass preparation)

- 250.00 250.00

Mk590-HWALL MOuNT STRIkE BOX

(Image is only a representation)84.73

MP100F

SECuRITy PATCH LOCk

Specify left or right hand, open in or out &glass thickness 10mm, 12mm or 15mm


POA

NSI

MP100k

Centre Patch keeper

for MP100F Security Patch Lock


MP100SP Strike Plate

For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed SeperatelyPOA - Price On Application

NSI - Non Stock Item with lead-time of 2-3 days into store + delivery


2009


3.13

Price List


Security Patch Locks suitable for 10 or 12mm glass thickness (See page 3.43 for glass preparation)PRODUCT CODE DESCRIPTION SSS PSS

MP3582A

SECuRITy PATCH LOCk

Cylinder Outside, Snib InsideHandles both sides


871.68 1002.43

MP3582B

SECuRITy PATCH LOCk

Cylinder Outside, Handle Inside


730.65 837.86

MP3582C

SECuRITy PATCH LOCk

Cylinder Outside, Snib Inside & No Handles


582.87 670.70

MP3582D

SECuRITy PATCH LOCk

Cylinder & Handles Inside & Outside


883.97 1016.57

MP3582E

SECuRITy PATCH LOCk

Cylinder Outside & Handles Both Sides


MP3582k SECuRITy PATCH LOCk kEEPER 506.27 582.21

MP3582SP STRIkE PLATE 42.97 49.67For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately

Due to the above items being made to order the lead-time can be up to 3 days + delivery


2009


3.14

Price List


Security/Sliding Patch Locks/Latches & Flush/Finger Pulls suitable for 10mm & 12mm glass thickness

PRODUCT CODE DESCRIPTION NA

MSL-1

SLIDING DOOR PRIVACy LATCHSnib Both Sides

Specify left or right hand, inside/outside &glass thickness 10mm or 12mm


POA

NSI

MSL-2

SLIDING DOOR PRIVACy LATCHSnib One Side

Specify left or right hand, inside/outside &glass thickness 10mm or 12mm


MSL-3

SLIDING DOOR LOCk

Dimensions are the same asthat shown for MSL-1/2 above


SDFP70 FP150

SDFP70

SLIDING DOOR FINGER PuLL

70mm Diameter

Suitable for 10mm or 12mm Glass55mm Diameter Hole for Glass Preparation

85.00

SSS/PSS

FP150

SLIDING DOOR FLuSH PuLL

Handle with Ring Pull for Cavity Installation150mm x 70mm x 36mm

Specify glass thickness 10mm or 12mm(See page 3.44 for glass preparation)

POA

SSS

NSI

For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed SeperatelyPOA - Price On Application

NSI - Non Stock Item with lead-time of 1-2 weeks from following Thursday of order date + delivery


2009

Frameless Commercial Hardware

3.15

Price List


Lever Locks and Latch Sets suitable for 10mm & 12mm glass thickness (See page 3.44 for glass prep)

PRODUCT CODE DESCRIPTION SSS/PSS

LLJ-01LEVER LOCkSET

Locking to timber or aluminium jamb230.37

LLG-02LEVER LOCkSET

Locking to glass sidelite230.37

LLJ-03LEVER LATCHSET

Latching to timber or aluminium jamb187.77

LLG-04LEVER LATCHSET

Latching to glass sidelite187.77

LSG-08STRIkE BOX

For glass sidelite117.79

LSJ-09STRIkE PLATE

For aluminium or timber jambs16.03

DC110 DOuBLE CyLINDERS (EuRO TyPE) 34.19

CT110 CyLINDER AND TuRN (EuRO TyPE) 42.74

For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately


2009


3.16

Price List


Metro Door Rails & Accessories for 10mm/12mm glass thickness (See page 3.45 for glass prep, etc.)

PRODUCT CODE DESCRIPTIONRails up to 1000mm

NA SSS or PSS

Powder Coat *

MR10 BOTTOM PIVOTING RAIL - NON LOCkING 233.17 315.32 255.37MR20 TOP PIVOTING RAIL - NON LOCkING 233.17 315.32 255.37MR22 TOP PIVOTING RAIL - NON LOCkING FOR COC 270.93 353.07 293.13MR30 BOTTOM PIVOTING RAIL - LOCkING 397.48 479.63 419.68MR40 TOP PIVOTING RAIL - LOCkING 397.48 479.63 419.68MR42 TOP PIVOTING RAIL - LOCkING FOR COC 435.24 517.39 457.44MR50 BOTTOM SLIDING RAIL - NON LOCkING 187.86 270.91 210.07MR60 TOP SLIDING RAIL - NON LOCkING 187.86 270.91 210.07MR70 BOTTOM SLIDING RAIL - LOCkING 354.86 433.01 377.58MR80 SIDE PANEL RAIL 187.86 270.91 210.07MRX EXTRA PER MM OVER 1000MM 0.19 0.29 0.19

15MM DOOR RAILS ALSO AVAILABLE - ADD $45 TO ABOVE PRICESPLEASE NOTE

• Specify glass thickness & when ordering locking rails please state cylinder type:DC - Double Cylinder SC - Single Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately

• Rails over 1200mm available as a special with lead-time of 1-2 weeks


Mk590 GROuND kEEPER 24.23

MRGFLOOR GuIDE FOR SLIDING RAILS

Black Nylon34.16

MDGFLOOR GuIDE FOR 8MM TO 10MM GLASS SLIDING RAILS

Black Nylon29.03

MSC90 SINGLE CyLINDER 34.17

MTk90 TuRN kNOB 23.24

MER90 ESCuTCHEON ROSE 14.37

* Powder coat colour as per standard range stated on page 1.23


2009


3.17

Price List


AGA Door Rails for 10/12mm glass thickness (See page 3.46 for glass deduction details)

PRODUCT CODE DESCRIPTION10/12mm Rails up to 1000mmNA SSS PSS

uR41 BOTTOM PIVOTING RAIL - NON LOCkING

POA

uR42L BOTTOM PIVOTING RAIL - LOCkING (590)

uR42EL BOTTOM PIVOTING RAIL - LOCkING (PLuNGER)

uR43 TOP PIVOTING RAIL - NON LOCkING

uR44L TOP PIVOTING RAIL - LOCkING (590)

uR49 TOP PIVOTING RAIL - NON LOCkING FOR COC

uR47 TOP SIDE PANEL RAILuR48 BOTTOM SIDE PANEL RAIL

MuS48 SIDE PANEL RAIL SETTING BLOCkuRX EXTRA PER MM OVER 1000MM

15MM DOOR RAILS ALSO AVAILABLEPLEASE NOTE

• Specify glass thickness & when ordering locking rails please state cylinder type:DC - Double Cylinder SC - Single Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately

• Weatherseals for rails included• Locking Bottom Pivot Rail weighs 5.5kg

INSTALLATION PROCEDuRE FOR uNI-DOOR RAIL1. Remove End Caps2. Remove Spacers (Rods)3. Remove Covers (for access to body)4. Clamps rail to glass at correct door height by tightening the nylon screws to their maximum5. Hang door in place correctly6. Apply silicon sealant to the holes between glass and rail7. Replace covers, spacers and end caps after the setting of silicon


Mk590 GROuND kEEPER 24.23

MSC90 SINGLE CyLINDER 34.17

MTk90 TuRN kNOB 23.24

MER90 ESCuTCHEON ROSE 14.37

The above rails are available with a lead-time of 3-4 days into store + delivery


2009


3.18

Price List


Metro Floor Springs & Components (See page 3.47 for installation details)PRODUCT CODE DESCRIPTION PRICE

REMOVABLE SPINDLES (FLOOR CLEARANCE OF 12MM FOR PATCH FITTINGS)

236.95

MFX840WNHO WEAk STRENGTH 15NM NON HOLD OPEN

MFX840WHO WEAk STRENGTH 15NM HOLD OPEN 90º

MFX840SNHO STANDARD STRENGTH 25NM NON HOLD OPEN

MFX840SHO STANDARD STRENGTH 25NM HOLD OPEN

Extended Spindles to suit MFX Floor SpringsPRODUCT CODE DESCRIPTION PRICE

MFX5 EXTENDED By 5MM 34.42MFX10 EXTENDED By 10MM 42.50MFX15 EXTENDED By 15MM 49.17MFX20 EXTENDED By 20MM 55.97MFX25 EXTENDED By 25MM 62.67MFX30 EXTENDED By 30MM

POAMFX35 to MFX50 EXTENDED By 35MM, 40MM, 45MM OR 50MM

Floor Spring ComponentsPRODUCT CODE DESCRIPTION PRICE

MFX840 BODy ONLy 165.33

MFXB BOX ONLy 27.50

MFXCP SATIN STAINLESS STEEL COVER PLATE 27.61

MFXSP COVER PLATE SCREW PACk 7.34

PLEASE NOTE• These floor springs are designed to be used with Metro Patch Fittings & Door Rails• Floor Springs are supplied with foundation box, satin stainless steel cover plate & screw pack• Floor box dimensions are 307mm x 108mm x 40mm Deep• Maximum door width is 1100mm & maximum door weight is 100kg

POA - Price On Application


2009


3.19

Price List


Concealed Overhead Closers (See page 3.48 for installation details)


MFGCOC90SNHO STANDARD STRENGTH 25NM NON HOLD OPEN 90º

185.22

MFGCOC90SHO STANDARD STRENGTH 25NM HOLD OPEN 90º

MFGCOC105SHO STANDARD STRENGTH 25NM HOLD OPEN 105º

MFGCOC90HHO HEAVy STRENGTH 35NM HOLD OPEN 90º

PLEASE NOTE• These COC’s are supplied with side load arm and bottom pivot assembly• Maximum door width is 1100mm & maximum door weight is 100kg

Geze Floor Springs (See page 3.49 for detailed drawing)PRODUCT CODE DESCRIPTION PRICE

GTS500NVNHO Adjustable Strength EN1 - EN4(15NM - 30NM) Non Hold Open

518.54

GTS500NVHO Adjustable Strength EN1 - EN4(15NM - 30NM) Hold Open 85º

GTS500CP SSS SSS GTS500 Floorspring Cover Plate & Screw Pack 25.11

• Back Check Feature• Closing Speed & Latching Action adjustable• Safety Valve preventing deliberate overloading• Closing range from approx.170º

• Large adjustment range in Galvanised Cement Box - Height 6mm, Lateral 10mm & Length 10mm

• Floor box dimensions are 278mm x 82mm x 42mm Deep, Max. door width is 1100mm & Max. door weight is 150kg


2009


3.20

Price List

Geze Floor Springs (See page 3.49 & 3.50 for detailed drawings) & Extended SpindlesPRODUCT CODE DESCRIPTION PRICE

GTS550NV

• Adjustable Strength EN3 - EN6 (25NM - 40NM)

• Variable Hold Open (80º-165º)• Back Check fixed as of approx.

70º• Closing Speed, Delay & Laching

Action adjustable• Safety Valve preventing deliber-

ate overloading• Test cycles = 1,000,000• Closing range from approx.

170-175º• Large adjustment range in Gal-

vanised Cement Box - Height 6mm, Lateral 10mm & Length 9mm

• Floor box dimensions are 342mm x 82mm x 54mm Deep, Max. door width is 1400mm & max. door weight is 300kg

751.34

GTS550CP SSS SSS GTS550NV Floorspring Cover Plate & Screw Pack 53.04

GES5 5mm Extended Spindle 37.46


GES10,13,15 or 20 10,13,15 or 20mm Extended Spindle 47.46

GES25 & 28 25 or 28mm Extended Spindle 52.21


GES35,40,45 or 50 35,40,45 or 50mm Extended Spindle 62.21

POA - Price On Application


2009


3.21

Price List


Pull Handles

PRODUCT CODE DESCRIPTION SSS PSS

MD300

D PuLL HANDLE

332mm/337mm/482mm/532mm/632mm x 32mm Diameter

Holes Centres: 300mm/305mm/450mm/500mm/600mmHole Diameter: 14mm

77.38 NSI -

MD305 77.38 87.05

MD450 112.78 133.93

MD500 122.78 NSI -

MD600-2 142.87 171.44

MO300OFFSET D HANDLE

337mm/482mm x 32mm Diameter

Hole Centres: 305mm/450mmHole Diameter: 14mm

213.92 -

MO305 107.15 122.46

MO450 273.36 POA

MCS300

HALF CIRCLE HANDLE

332mm x 32mm Diameter

Hole Centres: 300mmHole Diameter: 14mm

284.57 POA

MCR305

HALF CIRCLE HANDLE



119.00 131.88

MB450BOW HANDLE


Hole Centres: 450mm/600mmHole Diameter: 14mm

267.16

POA

MB600 356.11



2009


3.22

Price List


Pull Handles

PRODUCT CODE DESCRIPTION SSS PSS Powder Coated

MF450-25FINELINE PuLL HANDLE

(H Shape Round Section)

450mm x 25mm Diameter450mm/600mm/900mm/1200mm x 25mm/32mm Diameter

Hole Centres:330mm/250mm/450mm/500mm/700mm/1000mm

Hole Diameter: 12mm

179.52- -

MF450-32 193.00

MF600 - 338.72 -

MF600-32 214.47 - -

MF900 310.00 371.00 432.00

MF1200 350.00 420.00 -

MFS600

FINELINE PuLL HANDLE(H Shape Square Section)600mm x 25mm SquareHole Centres: 400mmHole Diameter: 12mm

264.42

POA -

MFOS600

FINELINE OFFSET PuLL HANDLE(H Shape Offset Square Section)

600mm x 25mm SquareHole Centres: 425mmHole Diameter: 12mm

264.42

NSI

MFC450 CEE PuLL HANDLE(Curved Round Section)

450mm/600mm x 25mm DiameterHole Centres: 250mm/350mm

Hole Diameter: 12mm

235.17

MFC600 276.68

MSD450 DEE PuLL HANDLE(Square Section)

475mm/625mm x 25mm SquareHole Centres: 450mm/600mm

Hole Diameter: 12mm

162.38

MSD600 264.42

MJ450

“S” TAPER PuLL HANDLE(Solid Brass Section)

450mm LongHole Centres: 215mmHole Diameter: 12mm

597.49SATIN

CHROME

NSI

- -

MT450

STRAIGHT TAPER PuLL HANDLE(Solid Brass Section)

450mm LongHole Centres: 215mmHole Diameter: 12mm

509.16SATIN

CHROME

NSI

- -

POA - Price On ApplicationNSI - Non Stock Item with a lead-time of 10-15 business days into store + delivery

MFS6

00

MFOS

600

MFC4

50/60

0

MSD6

00

MJ45

0

MT45

0


2009


3.23

Price List


Pull Handles

PRODUCT CODE DESCRIPTION SSS

M750

ICON PuLL HANDLE(Solid Round Section)

750mm/1250mm/1750mm x 25mm Diameter

Hole Centres: 2/3/4 x 500mmHole Diameter: 14mm

Other Sizes Available on Request

770.15

NSI

M1250942.77

NSI

M17501115.38

NSI

218-AAF/1ROuND/SQuARE PuLL HANDLE

300mm/800mm/1300mm/1800mm/2300mm x 32mm Diameter

Hole Centres: 200mm/700mm/1200mm/1700mm/2200mmHole Diameter: 12mm

Handle Projection: 92mm

Other sizes available on request

POA

NSI

218-AAF/6

218-AAF/11

218-AAF/16

218-AAF/21

MRS550

ROuND/SQuARE OFFSET PuLL HANDLE



269.25

NSI

MRD300DEE PuLL HANDLE

320mm/470mm/620mm x 40mm x 20mm

Hole Centres: 300mm/450mm/600mmHole Diameter: 12mm

167.91NSI

MRD450 203.94NSI

MRD600 234.50NSI

POA - Price On Application NSI - Non Stock Item with a lead-time of 10-15 business days into store + deliveryPolished Stainless Steel available on Request with extended lead-time


2009


3.24

Price List


Pull Handles

PRODUCT CODE DESCRIPTION SSS PSS

218-ACE/1 Wiggly Pull Handle670mm/930mm x 32mm Diameter

Holes Centres: 380mm/635mmHole Diameter: 12mm


Non Stock Item

POA

NSI

POA

NSI

218-ACE/2

218-ACA/1

Curve Pull Handle690mm x 32mm Diameter

Holes Centres: 425mmHole Diameter: 12mm


Non Stock Item

218-ABC/1Harp Pull Handle




Non Stock Item218-ABC/2

218-ACO/1Cradle Pull Handle



Handle Projection: 92mmNon Stock Item

218-ACO/2

A450Arc Pull Handle

398mm/824mm OA Length



250.00 300.00

A750 350.00 420.00

POA - Price On ApplicationNSI - Non Stock Item with a lead-time of 10-15 business days into store + delivery


2009


3.25

Price List


Channel Sections

PRODUCT CODE DESCRIPTION NA Mill

CS2525MM X 20MM

CHANNEL SECTION

StockLength

5000mm68.95 56.71

CS25CL Cut LengthPer Metre 17.24 14.18

CS40

40MM X 20MM CHANNEL SECTION

StockLength

5000mm93.53 77.80


CS243

40MM X 30MM TWO PEICECHANNEL SECTION

See Page 3.25A forGlazing Backing Seal & Wedges

StockLength

5000mm180.11 153.06


CS143

40MM X 30MM ONE PEICECHANNEL SECTION

See Page 3.25A forGlazing Backing Seal & Wedges

StockLength

5000mm132.92 100.50


CS679 25MM X 10G PAN SCREWS SQuARE DRIVE 304 SS 0.25

CS679CL 35MM X 10G PAN SCREWS SQuARE DRIVE 304 SS 0.35

CS673 50MM X 10G PAN SCREWS SQuARE DRIVE 304 SS 0.45

Channels are available in Powder Coated & other Anodised finishes on Request See Section 6 for Setting Blocks


2009


3.25A

Price List


Glazing Backing Seal & Wedges

PRODUCT CODE DESCRIPTION Price Per Metre

9272 Santoprene Backing Seal 2mm Compressed 1.88

9275 Santoprene Backing Seal 4mm Compressed 2.10

Reference for Dynex PVC and Santoprene Wedge (not supplied by MFGS but shown for reference)

PRODUCT PVC CODE COLOUR STRIPE COIL LENGTH COMPRESSED SIZE MM

SANTOPRENE CODE

40470 Black 150m 7.0 90470

40460 Brown 150m 6.0 90460

40455 Green 150m 5.5 90455

40450 White 200m 5.0 90450

40445 yellow 250m 4.5 90445

40440 Orange 250m 4.0 90440

40435 Red 250m 3.5 90435

40430 Purple 250m 3.0 90430

40425 Blue 400m 2.5 90425

40420 Grey 400m 2.0 -


2009


3.26

Price List


Door SealsPRODUCT CODE DESCRIPTION

DS180-12 DS180-10

DS180-12

12mm GLASSALuMINIuM DOOR SEAL

Natural Anodised with polypropylene grey pileIncludes double sided adhesive foam tape

Standard Length 3000mm

59.85

DS180-10

10mm GLASSALuMINIuM DOOR SEAL

Natural Anodised with polypropylene grey pileIncludes double sided adhesive foam tape


59.85

NSI

IS7140 IS7150

IS714012mm GLASS

CLEAR POLyCARBONATE DOOR SEALwith black polypropylene pile


44.87

IS715015mm GLASS

CLEAR POLyCARBONATE DOOR SEALwith black polypropylene pile


44.87

NSI

DSS90-X-yX = 10mm or 12mm Glass Thickness

y = Sidepanel/Wall Clearanceusing different size woolpile

DSS90-10-18

12mm/15mm GLASS90° ALuMINIuM DOOR SEAL

Natural Anodised Slim profilewith polypropylene grey pile.

Suitable for Manual or Automatic Sliding Doors.Fitted to back edge of door to

create seal back to side panel/wall.Will reduce draughts & noise.

Includes double sided adhesive foam tape.Profile matches DS180 seals above.

Standard Length 3000mm.

73.41

NSI

DSS90-10-20DSS90-10-23DSS90-10-26DSS90-10-28DSS90-12-18DSS90-12-20DSS90-12-23DSS90-12-26DSS90-12-28

Decal Vision Disc’sPRODUCT CODE DESCRIPTION

DD30 DS25

DD30SATIN STAINLESS STEEL

DECAL VISION DISC30mm Diameter, uV glued to glass

to act as a vision strip8.02

DS25SATIN STAINLESS STEEL

DECAL VISION DISC25mm x 25mm Square, UV glued to glass

to act as a vision strip

NSI - Non Stock Item with a lead-time of up to 7 days from order date into store + delivery

frameless glass commercial hardware indexs3-ap-southeast-2.amazonaws.com/resources.farm1... ·...

Documents