flushing services · versatility flushing, pressure testing, injection and cleaning proserv offers...
TRANSCRIPT
Technical Specification
Dimensions (LxWxH) 2000 x 1000 x 1825 m
Weight 1000 kg
Engine 20 Kw
Voltage 440v/690 volt 50/60 Hz
Pump Water, oil based and non-lubricated (for other liquids or acids please contact us)
Max discharge pressure 345 bar
Max flow rate 34 l/min @ 345 bar
Suction connection 3/4” BSP
Discharge connection 1/2 ” BSP
Utilities required Water for cooling, filters : 1 HC 9800FKP8H 1 HC9100FKP8H
Standard for design Offshore zone 1
Classification DNV 2.7-1
Versatility Flushing, pressure testing, injection and cleaning
Proserv offers a wide range of various flushing units with diesel-engine drive and electrical drive options for sale and hire.
We have different pump units for pure flushing or for flushing and pressure testing. We can also manufacture bespoke solutions for specific client requirements.
Features & Benefits
• Certified to ISO 4406:1999, NAS 1638 and SAE 4059D standards• Cleanliness verification to the appropriate standard• All stainless steel construction• Wide range of pressure and flow combinations• Suitable for low viscosity water and oil based fluids• Multi voltage supply
Proserv Flushing Unit - Offshore
ingenious simplicity
PRODUCTIONPRODUCT SPECIFICATION SHEET
Technical Specification
Dimensions (LxWxH) 1600 x 860 x 1500 m
Weight 700 kg
Engine Electric 30 Kw
Voltage 380-690 Volt, 50 Hz
Pump Harben type P8x20
Pressure pump Haskel ASF 150
Fluid Water, oil based and non-lubricated liquids (for other liquids or acids please contact us)
Max discharge pressure 345 bar (Harben) 1035 bar (Haskel)
Max flow rate 48 l/min @ 50 bar, 35 l @ 345 bar (Harben) 0-1.2 l/min (Haskel)
Suction Connection 3/4” BSP
Discharge Connection 1/2 ” BSP
Utilities Required Fresh water for cooling. Filters: 1 HC9800FKP4H, 1 HC9100FKP8H
Standard for design Onshore
Classification No
Recommending For Haskel use, recommended 60 strokes pr min
Versatility Flushing, pressure testing, injection and cleaning
Proserv offers a wide range of various flushing units with diesel-engine drive and electrical drive options for sale and hire.
We have different pump units for pure flushing or for flushing and pressure testing. We can also manufacture bespoke solutions for specific client requirements.
Features & Benefits
• Certified to ISO 4406:1999, NAS 1638 and SAE 4059D standards• Cleanliness verification to the appropriate standard• Designed to provide the calculated flushing flow for flushing and cleanliness
certification of components and systems• Atex compliant• All stainless steel construction• 20 Kw electric motor• Multi fluids capability• Reservoir with built in suction filter, return filter and visual level and temper-
ature indicator
Proserv Flushing Unit - Onshore
Technical Specifi cation
Can be customised to suit customer requirements
Dimensions (LxWxH) 2.27 x 1.52 x 1.78m
Weight 1134kg
Engine Electric
Voltage 480V
Pump Piston Type
Pressure Pump 5K
Fluid Mineral Synthetic
Max working pressure 5,000psi
Max Flow Rate 10gpm
Outlet Connection 3/4” JIC Hose
Return Connection 3/4” JIC Hose
Power Requirement 3 Phase, 60 amp. 600v max
Standard for Design Onshore
Versatility Flushing, pressure testing, injection and cleaning
Proserv offers trained fi eld technicians to perform a variety of fi ltration and fl ushing services applicable to pre-commissioning of new equipment as well as maintenance or refurbishment of existing equipment that will keep your topside and subsea equipment operating at peak performance, reducing the potential for premature failure. We provide a variety of diesel-engine drive and electrical drive hydraulic oil based and water based fl ushing units for long or short term hire.
We can provide mobile, general service or zone-rated hydraulic fl ushing and test rigs applicable for use onshore at drilling rigs, petrochemical plants, defense establishments, railways and shipping. Our fl ushing rigs have been specifi cally developed for use with mineral and synthetic oils that support pure fl ushing or fl ushing and pressure testing for a wide range of customized high velocity oil fl ushing, contamination control and oil and fuel purifi cation services.
Our hydraulic fl ushing units come equipped with sampling points for on-site oil analysis to test new fl uid for cleanliness. Or we also offer portable microscope kits and automatic particle counters to verify hydraulic fl uid cleanliness.
Features & Benefi ts
• Fast response; anytime, anywhere, 24/7• Experienced technicians, pre-screened and qualifi ed• Fluid sample analysis follows these standards; ISO 4406, NAS 1638 and SAE
4059D• Designed to provide the calculated fl ushing fl ow for fl ushing and cleanliness
certifi cation of components and systems• Flushing units are all stainless steel construction• Reservoir with built in suction fi lter, return fi lter and visual level and
temperature
Flushing Services - Hydraulic Oil-Based Fluid
ingenious simplicity
DRILLING/PRODUCTION/SUBSEAPRODUCT SPECIFICATION SHEET
Proserv offers trained field technicians to perform a variety of filtration and flushing services applicable to pre-commissioning of new equipment as well as maintenance or refurbishment of existing equipment that will keep your topside and subsea equipment operating at peak performance, reducing the potential for premature failure. We provide a variety of diesel-engine drive and electrical drive hydraulic and water based flushing units for long or short term hire.
We provide water based fluid units that are mobile, general service or zone-rated flushing and test rigs applicable for use in onshore and offshore installations, petrochemical plants, defense establishments, railways and shipping. Water based glycol fluid flushing units are also available for subsea hydraulic control applications with flow rates from 5-400 litres per minute and Integral test pumps can be provided so clients can pressure test these systems, assuring integrity.
Our hydraulic flushing units come equipped with sampling points for on-site oil analysis to test new fluid for cleanliness. Or we also offer portable microscope kits and automatic particle counters to verify hydraulic fluid cleanliness.
Features & Benefits
• Fast response; anytime, anywhere, 24/7• Experienced technicians, pre-screened and qualified• Fluid sample analysis follows these standards; ISO 4406, NAS 1638 and SAE
4059D• Designed to provide the calculated flushing flow for flushing and cleanliness
certification of components and systems• Flushing units are all stainless steel construction• Multi fluids capability on some units• Reservoir with built in suction filter, return filter and visual level
Flushing Services - Hydraulic Water Based Fluid
ingenious simplicity
DRILLING/PRODUCTION/SUBSEAPRODUCT SPECIFICATION SHEET
Technical Specifications Water Based Glycol Fluid Unit (5,000psi)
Can be customized to suit customer requirements
Dimensions (LxWxH) 1.84 x 1.13x 1.3m
Weight 1,119kg
Engine Electric
Voltage 220V
Pump Piston Type
Pressure Pump 5K
FluidWater (oil based, non-lubricated liquids, other liquids or acids please contact us)
Max Working Pressure 5,000psi
Max Flow Rate 9.9 gpm
Return Connection 1/2” Male JIC
Outlet Connection 1/2” Male JIC
Power Requirement 3 Phase, 60 amp, 600v max, 50/60 hz
Standard for design Onshore
Classification No
Versatility Well head valves, pipe, tubing and hose
Technical Specifications Test HPU (LP 5,000psi/HP 22,500psi)
Can be customized to suit customer requirements
Dimensions (LxWxH) 1.21x 1.12 x 1.98m
Weight 1,134kg
Pump Pneumatic
Pressure Pump 22.5K
FluidWater (oil based, non-lubricated liquids, other liquids or acids please contact us)
Working Pressure LP-5,000psi HP-22,500psi
Max Flow Rate 3 gpm
Standard for designOnshore/Offshore PN: T5-22.5K Serial:T5-100-001
Classification No
Versatility8-line capability, 4 LP, 4 HP; tree function testing, control system testing
Technical Specifications HPU Flushing Unit (5,000psi)
Can be customized to suit customer requirements
Dimensions (LxWxH) 2.48x 1.49 x 1.75m
Weight 2000kg
Engine Electric (Bartec-Varnost multi-voltage 380-690V)
Voltage Range 380-480V / 660 - 690V
Frequency 50-60Hz
Pump HARBEN 8.20
Pressure Pump 5K
Fluid Mineral and Synthetic Oil
Max Working Pressure 5,000psi
Max Flow Rate 12.4 gpm
Outlet Connection 3/4” BSP
Reservoir Capacity 80 gal
Return Connection 1” BSP
Power Requirement 63 Amp
Outlet Cooling 1/2” BSP
Inlet Cooling 1/2” BSP
Filter element 3p 3µ
Standard for design Onshore/Offshore
VersatilityTapping for bottle sampling, connection for online sampling using particle monitor & PCV
Trans Aqua HT Fluid Unit - 5,000psi
Test HPU - LP 5,000psi/HP 22,500psi
HPU Flushing Unit - 5,000psi