FEATURES & SPECIFICATIONSINTENDED USE — Ideal for use in food and beverage processing, cold storage, natatoriums and garden centers. Fiberglass enclosure protects fixture while remaining easy to service and clean. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compat-ibility table for suitable uses.CONSTRUCTION — One-piece 5VA rated fiberglass housing with continuous poured-in-place, closed-cell gasket. Tool-less ballast and wiring access. OPTICS — Injection-molded, impact-resistant clear acrylic diffuser with frosted ends and side lineal prisms is standard (.080" thick), securely tethered to fixture for ease of maintenance. UV stabilized polycarbonate diffuser option also is available (.080" thick). Acrylic frosted lens option available for reduced glare. Stainless steel latches (12) included.ELECTRICAL — Utilizes high-efficiency LEDs mounted to core circuit boards. 4100 Kelvin temperature standard with additional color temperatures also available including amber for coastal and livestock ap-plications. High efficiency driver operates 100V through 277V, 50-60HZ. Integral surge protection tested in accordance with IEEE/ANSI C62.41.2 to Category C Low. Includes a temperature-sensing component that will limit the temperature of the LEDs in case of excessive ambient temperatures or mis-application. 0-10V driver standard. Bi-level control options available.Expected service life of 60,000 hours at 80% lumen maintenance (L80); predicted life of more than 100,000 hours.INSTALLATION — Fixture can be ceiling or suspend mounted. Surface conduit entry provisions with watertight plugs are standard. Stainless steel universal hanging clips included for suspension with aircraft cable (cable not included). Optional stainless steel V-hooks available for chain hanging (chain not included). LISTINGS — CSA Certified to UL and C-UL standards for ambient temperatures from -22°F (-29°C) to 104°F (40°C) depending on lumen package selected. Suitable for wet location. Covered Ceiling not required to maintain wet location listing or IP ratings. IP65, IP66 and IP67 rated and certified to meet NSF Splash Zone 2. NEMA 4X rated. 1500 PSI hose-down. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspxActual performance may differ as a result of end-user environment and application.Note: Specifications subject to change without notice.

Specifications

Length: 52.0 (132.0)Width: 14-5/8 (37.1)Depth: 6 (15.2)Weight: 36 lbs. (12.7 kg)

Notes 1 The CCT value provided is of lamp source and actual

CCT will vary upon levels.2 Only available with 41K. Not available on 5L.3 For additional options consult factory.4 Cordsets, MSI_, and DIM options are not available

on the same fixture. Combination of two only (ex. cordset and DIM, cordset and MSI_, etc.).

5 Fixture will no longer be NEMA 4X rated. 6 Not available with cord, sensor or photocell options.7 Housing pre-drilled with WLF in center; additional

support cables required

All dimensions are inches (centimeters) unless otherwise specified.

FHE LED /

Series Lumens/Color temperature1 Diffuser Distribution Voltage

FHE LED 15" X 52" 5L 5000 lumens7L 7,000 lumens9L 9,000 lumens12L 12,000 lumens15L 15,000 lumens

(blank) 4100K, (65 CRI)27 2700K, (85 CRI)35 3500K, (85 CRI)57 5700K, (70 CRI)AMB Amber LEDs

(blank) Clear acrylicPCL Clear polycarbonateFST Frosted acrylic

(blank) General distributionSD Spread distribution2

(blank) MVOLT; 120-277VHVOLT HVOLT; 347V-480V, 60HZ only120 120V277 277V347 347V (60HZ only)480 480V (60HZ only)

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: FHE LED 15L/57 FST

INDUSTRIAL FHE-LED

Accessories: Order as separate catalog number.

FHEMHKB Stainless steel V-hook and bracketsFHEEMK End mount suspension bracket11

FHERMK Rigid mounting bracketMHCH36 3' Double chain12

LCF Light/Glare control film

MHHK120 10' single leg aircraft cable13

MHHK120SS 10' single leg aircraft cable, stainless steel13

FHEACT120 10' Y-toggle aircraft cableFHEACT240 20' Y-toggle aircraft cableRK1 T10DRV Torx® T10 screwdriver for TRS option

High-Pressure Hose-Down

FHE LED FOOD PROCESSING

14-5/8(37.1)

6(15.2)

Options3

CS89 Cord set - NEMA type STW 16/3, 6', 600V, white, no plug, wet location4

CS89L12 Cord set - NEMA type STW 16/3, 12', 600V, white, no plug, wet location4

CS88 Cord set - Brad Harrison 3P male straight 600V molded plug, 6' type STOOW yellow PVC cord, 16/34

CS88L12 Cord set - Brad Harrison 3P male straight 600V molded plug, 12' type STOOW yellow PVC cord, 16/34

MHKB Stainless steel V-hook and brackets

WLF Wet location fitting (two pre-installed, 40" off centers) 5

WLFEND Wet location fitting (one end) 5

WLFEND2 Wet location fitting (both ends)5,6

L/SP Less surge protectorDIM Pre-wired for 0-10V low-voltage dimming (100-10%)4

PMP Pendant monopoint7

MSI__ Wet location 360° motion sensor pre-wired for ON/OFF operation4,8,9

TRS Tamper-resistant Torx® T10 screws10

DLC DesignLights Consortium® qualified product

8 For mounting up to 8', specify MSI8; for mount-ing up to 20', specify MSI20; for mounting up to 40', specify MSI40.

9 Must specify voltage.10 Stainless steel Torx® T10 screws with center

reject pin11 Not available with HVOLT, 347, or 480.12 For use with MHKB option.13 For use with EMK option.

Catalog Number

Notes

Type

DIMENSIONSInches (centimeters). Subject to change without notice.

FHE LED High-Pressure Hose-Down, LED

MOUNTING ACCESSORIES

52(132.0)

FHE-LED

INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 Fax: 770-981-8191 www.lithonia.com © 2012-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/29/14

14-5/8(37.1)

6(15.2)

LED Specification Matrix*

Lumens Watts Lumens per watt

mA Number of boards

Maximum ambient temperature

Recommended light source comparison

5,000 66 76 525 4 40°C

2-lamp 32-watt T8

1-lamp 54-watt T5HO

100MH

7,000 86 81 350 8 40°C3-lamp 32-watt T8,

2-lamp 54-watt T5HO

9,000 118 76 525 8 40°C4-lamp 32-watt T8

150MH

12,000 152 79 350 12 25°C3-lamp 54-watt T5HO

175MH

15,000 215 74 525 12 25°C

6-lamp 32-watt T8

4-lamp 54-watt T5HO

250MH

WLF – Wet location fitting (two pre-installed, 40" off centers)

PMP – Pendant monopointFHERMK – Rigid mounting bracket**

V-hook, chainV-hook, cableCable FHEEMK – End mount suspension bracket**

*Values based on 41K LEDs and clear acrylic lens. Calculations are estimated results for general informational purposes only. Results may vary depending on the application.

** Made from 304 stainless steel

PHOTOMETRICSSee www.lithonia.com for photometry reports.

FHE LED High-Pressure Hose-Down, LED

FHE-LED

INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 Fax: 770-981-8191 www.lithonia.com © 2012-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/29/14

LIGHTING FACTS