8/8/2019 FBV-3-Press_ XL-C Specification Sheet

1/2

For Press Piping Applications

ES-FBV-3-Press_XL-C

Job Name Contractor

Job Location Approval

Engineer Contractors P.O. No.

Approval Representative

FBV-3-Prss XL-C

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,

please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-

out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Series FBV-3-Press XL-C2-Piece, Full Port, Brass Ball

Valves with Integral Press FittingEnd XL-C Connection

Designed for use in ProPress

Piping SystemsSizes: 2", 3", 4" (65, 80, 100 mm)

Features XL-C Connections

Designed for types K, L and M hard copper tubing

Press connection rated to 200psi CWP up to 250F

Adjustable stem packing and stem O-Ring seal

Blowout proof, bottom-loaded stem

Chrome-plated brass ball

Conforms to: MSS SP-110*

SpecificationsApproved valve to be 2-piece, full port, forged brass body and

adapter with chrome-plated brass ball and PTFE seats, seals,and thrust washer. Approved valves must have adjustablepacking and a single stem O-Ring seal. Valves with top-loadedstems or valves without adjustable stem packings are notallowed. Press connection rated to 200wpsi CWP at 250F.

Valve to be a Watts Series FBV-3-Press XL-C.

ProPress is a registered trademark of Viega N.A.

*Watts FBV-3-Press XL-C ball valves are designed to meetMSS SP-110 with the exception of the press end connection.Press-to-connect ends are new technology not yet covered inthe current edition of MSS SP-110 specification.

8/8/2019 FBV-3-Press_ XL-C Specification Sheet

2/2

ES-FBV-3-Press_XL-C 1110 2011 Watts

USA: No. Andover, MA Tel. (978) 688-1811 Fax: (978) 794-1848 www.watts.com

Canada: Burlington, ONT. (905) 332-4090 Fax: (905) 332-7068 www.wattscanada.ca

A Watts Water Technologies Company

Dimensions Weights

Size (DN) DimeNSioNS weight

S H E L1 L2 h R

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm Lbs. Kgs.

212 65 158 42.0 438 111 318 80 7516 185.4 31516 100.0 338 86.0 8116 205 9.04 4.1

3 80 11516 48.5 538 136 31116 93 858 218.4 458 117.6 4 101.6 8116 205 14.55 6.6

4 100 2716 61.5 6916 166 41116 119 1014 260.6 5516 134.6 5 126.6 1014 260 22.49 10.1

R

h

L2L1

e

PFt

L

S

Parts

1 Body Brass CW 602N

2 End Connection Brass CW 602N

3 Ball Brass CB 763-S

4 Stem Brass CW 614N

5 Packing Gland Brass CW 614N

6 Compression Ring Steel

7 Handle Steel DD11

8 Ball Seat PTFE

9 Stem Seal/Thrust Washer PTFE

10 Stem Seal PTFE

11 O-ring NBR

12 O-ring EPDM

13 Nut Steel CL 04

14 Nut Steel CL 04

12 3

4

5

6 6

7

8 8

9

10

11

12 12

13

14