211

EXT

EN

DE

D F

LUTE

CU

TTE

RS

L5

L6

Ts D3

ap

D

TRd°

Designation D ap Flute Z L5 D3 Ts L6 T(1) Rd° kg

P290 ACK D32-3-24-M16-12 32.00 24.00 3 6 40.00 29.00 M16 65.00 25.0 1.0 0.16

• Note: recommended ae up to 0.2xD • For adaptation options, see pages 247 • For user guide, see pages 461-468(1) Clamping wrench sizeFor inserts, see pages: P290 ACCT (395) • P290 ACKT (395)For holders, see pages: BT-ODP (FLEXFIT) (248) • C#-ODP (FLEXFIT) (248) • CAB M-M (FLEXFIT) (245) • DIN69871-ODP (249) • HSK A-ODP (FLEXFIT) (250) • HSK E-ODP (FLEXFIT) (251) • RE MB-ODP (246) • S M (245) • S M-C-H (245) • S M-CF (246)

Spare Parts

DesignationP290 ACK-M SR M3X0.5-L7.4 IP9 IP-9/151

P290 ACK-MExtended Flute Endmills with FLEXFIT Threaded Adaptation Carrying 12 mm Long Edged Inserts

D

ap

HL

d

Rd°

Designation D ap Flute Z H L d Rd° Shank(2) kg

P290 ACK D25-3-24-W20-12 25.00 24.00 3 6 40.00 95.00 20.00 1.4 W 0.200P290 ACK D25-3-36-W25-12 25.00 36.00 3 9 50.00 110.00 25.00 1.4 W 0.290P290 ACK D32-3-36-W32-12 32.00 36.00 3 9 50.00 110.00 32.00 1.0 W 0.500P290 ACK D32-3-48-W32-12 32.00 48.00 3 12 65.00 125.00 32.00 1.0 W 0.151P290 ACK D32-3-60-W32-12 32.00 60.00 3 15 80.00 140.00 32.00 1.0 W 0.589P290 ACK D32-3-84-W32-12 32.00 84.00 3 21 100.00 160.00 32.00 1.0 W 0.629P290 ACK D32-3-36-W25-18 (1) 32.00 36.00 3 6 55.00 115.00 25.00 2.0 W 0.362P290 ACK D40-3-53-W32-18 40.00 53.00 3 9 80.00 140.00 32.00 1.5 W 0.771P290 ACK D40-3-71-W40-18 40.00 71.00 3 12 95.00 165.00 40.00 1.5 W 1.135P290 ACK D40-3-90-W40-18 40.00 90.00 3 15 115.00 185.00 40.00 1.5 W 1.232P290 ACK D40-3-125-W40-18 40.00 125.00 3 21 150.00 220.00 40.00 1.5 W 1.386P290 ACK D50-4-53-W40-18 50.00 53.00 4 12 80.00 150.00 40.00 1.0 W 1.332P290 ACK D50-4-105-W50-18 50.00 105.00 4 24 130.00 210.00 50.00 1.0 W 2.228P290 ACK D50-3-160-W50-18 50.00 160.00 3 27 185.00 265.00 50.00 1.0 W 2.829P290 ACK D63-5-71-W50-18 63.00 71.00 5 20 95.00 175.00 50.00 0.8 W 2.582

• Note: recommended ae up to 0.2xD(1) Do not use with P290 ACKT...-FWR insert (2) W-WeldonFor inserts, see pages: P290 ACCT (395) • P290 ACKT (395)

Spare Parts

DesignationP290 ACK D25-3-24-W20-12 SR M3X0.5-L7.4 IP9 IP-9/151P290 ACK D25-3-36-W25-12 SR M3X0.5-L7.4 IP9 IP-9/151P290 ACK D32-3-36-W32-12 SR M3X0.5-L7.4 IP9 IP-9/151P290 ACK D32-3-48-W32-12 SR M3X0.5-L7.4 IP9 IP-9/151P290 ACK D32-3-60-W32-12 SR M3X0.5-L7.4 IP9 IP-9/151P290 ACK D32-3-84-W32-12 SR M3X0.5-L7.4 IP9 IP-9/151P290 ACK D32-3-36-W25-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D40-3-53-W32-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D40-3-71-W40-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D40-3-90-W40-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D40-3-125-W40-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D50-4-53-W40-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D50-4-105-W50-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D50-3-160-W50-18 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D63-5-71-W50-18 SR 14-544/S BLD T15/M7 SW6-T

P290 ACKExtended Flute Endmills Carrying 12 and 18 mm Long Edged Inserts

ISCAR212

EXT

EN

DE

D F

LUTE

CU

TTE

RS

D

L1L5

SS

ap

Rd°

Designation D ap Flute Z L1 L5 SS Rd° kg

P290 ACK D32-3-53-C5-18 (1) 32.00 52.00 3 9 64.0 90.00 50 2.0 0.794 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D40-3-87-C6-18 40.00 87.00 3 15 106.0 134.60 63 1.5 1.664 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D44-3-53-C4-18 44.00 53.00 3 9 - 91.00 40 1.2 0.930 SR 14-544/S BLD T15/M7 SW6-TP290 ACK D63-5-87-C8-18 63.00 87.00 5 25 104.0 140.00 80 0.8 4.000 SR 14-544/S BLD T15/M7 SW6-T

• Note: recommended ae up to 0.2xD(1) Do not use with P290 ACKT...-FWR insertFor inserts, see pages: P290 ACCT (395) • P290 ACKT (395)

P290 ACK-C#-18Extended Flute Endmills with CAMFIX Shanks Carrying 18 mm Long Edged Inserts

ap

D Da

L

D3

Rd°

Designation D ap Flute Z L D3 Da Rd° Arbor(1) kg

P290 SM D032-03-24-16-12 32.00 24.00 3 6 65.00 38.00 16.00 1.0 A 0.266P290 SM D040-04-24-16-12 40.00 24.00 4 8 45.00 38.00 16.00 0.7 A 0.229P290 SM D040-04-36-16-12 40.00 36.00 4 12 60.00 38.00 16.00 0.7 A 0.306P290 SM D040-04-48-22-12 40.00 48.00 4 16 85.00 48.00 22.00 0.7 A 0.474P290 SM D050-04-36-22-18 50.00 36.00 4 8 65.00 46.40 22.00 1.0 A 0.475P290 SM D050-04-53-22-18 50.00 53.00 4 12 80.00 46.40 22.00 1.0 A 0.568P290 SM D050-04-71-27-18 50.00 71.00 4 16 105.00 48.00 27.00 1.0 A 0.735P290 SM D063-05-53-27-18 63.00 53.00 5 15 80.00 55.00 27.00 0.8 A 1.000P290 SM D063-05-71-27-18 63.00 71.00 5 20 100.00 55.00 27.00 0.8 A 1.296P290 SM D080-06-71-32-18 80.00 71.00 6 24 100.00 74.00 32.00 0.5 A 2.207P290 SM D100-06-36-32-18 100.00 36.00 6 12 70.00 78.00 32.00 0.3 A 2.483P290 SM D100-07-71-40-18 100.00 71.00 7 28 100.00 85.00 40.00 0.3 A 3.497

• Note: recommended ae up to 0.2xD(1) For adaptation options, see page 461For inserts, see pages: P290 ACCT (395) • P290 ACKT (395)

Spare Parts

DesignationP290 SM D032-03-24-16-12 SR M3X0.5-L7.4 IP9 IP-9/151 SR M8X55-D11.5 DIN912P290 SM D040-04-24-16-12 SR M3X0.5-L7.4 IP9 IP-9/151 SR M8X35 DIN912P290 SM D040-04-36-16-12 SR M3X0.5-L7.4 IP9 IP-9/151 SR M8X45DIN912P290 SM D040-04-48-22-12 SR M3X0.5-L7.4 IP9 IP-9/151 SR M10X70DIN912P290 SM D050-04-36-22-18 SR 14-544/S BLD T15/M7 SW6-T SR M10X50DIN 912P290 SM D050-04-53-22-18 SR 14-544/S BLD T15/M7 SW6-T SR M10X60DIN912P290 SM D050-04-71-27-18 SR 14-544/S BLD T15/M7 SW6-T SR M12X70DIN912P290 SM D063-05-53-27-18 SR 14-544/S BLD T15/M7 SW6-T SR M12X70DIN912P290 SM D063-05-71-27-18 SR 14-544/S BLD T15/M7 SW6-T SR M12X70DIN912P290 SM D080-06-71-32-18 SR 14-544/S BLD T15/M7 SW6-T SR M16X80P290 SM D100-06-36-32-18 SR 14-544/S BLD T15/M7 SW6-T SR M16X50 DIN912P290 SM D100-07-71-40-18 SR 14-544/S BLD T15/M7 SW6-T SR M20X80DIN912

P290 SMExtended Flute Shell Mills Carrying 12 and 18 mm Long Edged Inserts