eol tester inspecciones del sistema balloonpartfunction 1 control backplane it is the area where the...
TRANSCRIPT
EOL TESTER
INSPECCIONES DEL SISTEMA
Balloon Part Function
1Control
backplaneIt is the area where the electrical components for the equipment to operate
2 PCB’s load Apply loads with DC or GND to the UUT3 Enclosure Interface between UUT and PXI
4PCB's
communicationGenerate U-sonic, K-line and S-net communication with UUT
5 UPS
In the absence of energy, its function is to keep lit the critical parts of the system (PC and programmable fountains mainly) so they can be turned off normally.
6
PCB's of sicht for
communication channels
Switcher between communication channels UTT
Balloon Part Function
1 PXI ChassisInterfaces between instrumentation and acquisition system and PC.
2 PC Main system controller
3 DC sources Energize equipment parts for testing
4 Sources Sorensen Energize the UUT for testing
5 Electronic Load Applying a controlled load to the UUT
DIAGRAMA DE FLUJO
REALIZAR PRUEBA
PANTALLA PRINCIPAL