en iso 9905 - standart · pdf filesds 01 04-10 en sds double suction split case centrifugal...
TRANSCRIPT
SDS 01 04-10 EN
SDS Double Suction Split Case
Centrifugal Pumps
9905EN ISO
ATEX
Technical Data
Handled Liquids
Discharge Nozzle RangeCapacitiesHeadsSpeedOperating TemperatureCasing Pressure (Pmax)( Pmax: Suction Pressure + Shut off Head )
SDS type pumps are suitable for clean or slightly contaminated liquids with low viscosity.
DN 65 up to DN 400 mmup to 3500 m3/hup to 180 mup to 2900 rpm20 °C up to 80 °C*16 bar (25 bar)*
• Water supply
• Irrigation
• Drainage
• Water circulation
• Fire fighting
• Industrial applications
• Power stations
• Water treatment plants
• Suction and discharge flanges are on the same axis atthe bottom casing. Split case design permits easy disassemblyof the rotor group for maintenance or repair without distortingpump alignment and suction and discharge piping.
• Flanges are conforming to ISO 7005-2 / PN 16 or PN 25.
• Impeller is of double suction. This feature increases pumpsuction performance in addition it provides the balance ofhydraulic axial forces.
• All impellers are balanced statically and dynamicallyaccording to ISO 1940 class 6.3.
Pump Designation
Pump typeDischarge nozzle (DN)Nominal impeller diameter (mm)
SDS 200- 500
(*) The material of pumps differ according to the type of pumpedliquid , operating temperature and pressure. Contact our companyfor detailed information.
Design Features
• Pump shaft is supported by grease-lubricated rollingbearings on both sides.
• Depending on customer requirement ‘‘Life-time grease-lubricated’’ rolling bearings are available.
• Different soft packing and mechanical seal types are available.
• In standard construction the direction of rotation of pump isclockwise when it is looked from the motor side. In this case,suction flange is at right and discharge flange is at left. Uponrequest the direction of rotation can be reversed, and whenthis is done the position of the suction and discharge flangesare also reversed.
Bearings
Shaft Seal
Rotation
Applications
General Information SDS
Performance Range SDS
Performance Range SDS
SDSSectional Drawing
( * ) Alternative Application
( ** ) Optional Application
( *** ) Double volute desing is applied to:
SDS 200-500 , 250-600 , 300-500 300-700 , 350-500 , 350-700
003 Stuffing box013 Volute casing (top half)014 Volute casing (bottom half)020 Wear ring030 Bearing bracket034 Bearing cover (inboard)035 Bearing cover (outboard)035 Bearing cover (coupling)042 Stuffing box gland044 Lantern ring046 Stuffing box ring**048 Mechanical seal cover*050 Impeller060 Pump shaft067 Spacer sleeve070 Shaft protecting sleeve071 Shaft protecting sleeve088 Thrower200 Ball bearing210 Impeller key211 Coupling key212 Spacer key230 Drain plug231.1 Air plug231.2 Air plug260 Grease Nipple390 Pin391 Shaft nut & Lock washer400 Stuffing box packing405 Mechanical seal*420 O-Ring421 O-Ring422 O-Ring*500 Flushing pipe
Part List
*** Double Volute Application
* Mechanical Seal Application
500
231.2
030
390
003
050
400
200
020
014
070
391
042
421
088
013
211
071
420
044
060
210 231.1
035
034
230
046
067212
260*422
*405
*048
036
Technical Data SDS
Material Equivalents
Material Options
GJL-250 (GG 25)GJS-400-15 (GGG 40)
G-X5 Cr Ni 19-10
G-Cu Al 10 NiX20 Cr 13
GP240GH (GS-C 25)
G-X5 Cr Ni Mo 19-11-2G-X2 Cr Ni Mo 19-11-2
X5 Cr Ni 18-10X2 Cr Ni 19-11X5 Cr Ni Mo 17-12-2
1.40211.43011.43061.4401
Description DIN 17007 EN-DIN ASTM
0.60250.70401.06191.43081.44081.4409
2.0975.01
A 48 Class 40-BA 536 Gr. 60-40-18A 216 Gr. WCBA 351/743/744 Gr. CF8A 351/743/744 Gr. CF8MA 351/743/744 CF3M
B 584 C 95800A 276 Type 420A 276 Type 304A 276 Type 304L
X2 Cr Ni Mo 17-12-21.4404 A 276 Type 316 LA 276 Type 316
X2 Cr Ni Mo N 22-5-31.4462 A 276 (32205)
G-X2 Cr Ni Mo Cu N 25-6-3-31.4517
G-Cu Sn 102.1050.01 B 584 C 90700G-X2 Cr Ni Mo N 26-7-41.4469
A 890 Gr. 1B (CD4MCuN)A 890 Gr. 5A (CE3MN)
Flange Dimensions
(*) Optional: Depending on customer requirement or request different types and brands of mechanical seals are applicable.
Parts List
EN 12756 / DIN 24960
0.60
25
0.70
40
1.06
19
1.43
08
1.44
08
1.40
21
1.43
01
1.44
01
1.44
62
1.43
06
1.44
04
2.10
50.0
1
1.44
09
1.45
17
1.44
69
2.09
75.0
1
Suction & Discharge(PN 16)
Df k s n bf
65
80
100
125
150
200
250
300
185
200
340
405
460
145
160
295
355
410
19
28
28
19
23
4
8
12
20
32
32
30
22
DNe/DNb
220 180 19 8 24
250 210 19 8 26
285 240 23 8 26
350 520 470 28 16 36
400 580 525 31 16 38
500 715 650 34 20 42
12
12
Df k s n bf
185
200
360
425
485
145
160
310
370
430
19
31
31
19
28
8
8
16
24
36
40
34
26
235 190 23 8 28
270 220 28 8 30
300 250 28 8 34
555 490 34 16 44
620 550 37 16 48
730 660 37 20 52
12
12
Df k
DN
e/D
Nb
bf s
“n“ number of holes
Suction & Discharge(PN 25)
Duplex (austenitic-ferritic) steelChrome nickel molybdenum steel (low carbon)
Cast ironNodular cast ironCast steelChrome nickel cast steelChrome nickel molybdenum cast steelChrome nickel molybdenum cast steel (low carbon)
Cast bronzeChrome steelChrome nickel steelChrome nickel steel (low carbon)Chrome nickel molybdenum steel
Austenitic-ferritic cast steel (duplex)
Cast bronzeAustenitic-ferritic cast steel (super duplex)
Volute casingImpellerShaftBearing housingWear ring (Casing)Shaft protecting sleeveMechanical seal (*)
Optional
Standard manufacturing
Technical Data SDS
l3l1l2 a1
n2n1
s
a2
m1m2
l
550
750
710
400
640
435
280320
20340
20300230460400200140300
200200
280
540460250
660540
200400450
470
300
235260
16 16 200 125 555 420 97555280
3 0 0120
16 16 22380320640540200400400470
200 150 555 420 97555 120
170355370420
16
16
16
16
150
125
100
80
450
400
350
310
800
710
42
35
65-250
100-315
125-450
125-350125-315
100-400
100-25080-315
80-250
80-200100 65
90
80
16
25
16
25
150-450
150-315
300-500
300-400300-315250-600
250-450250-350
200-500
200-400
200-315
350-500
350-400350-350300-700
365310350
310360 480400
22380320540460370420
65
6 5
16 16 250 200 645 500 1145130 360 22420360
720620300560500550
315
380
450500 640540240500
65 700620300630500600 400 224201145500645130 360350
300 250 720620300600500600
41522420360
3901145500645130
8 0 430 26485415550650720 540 1260170
16 16
80
960800380800600800
500 266001385615
770140500500
350800720350670550700 450 5201385615 420
25 25 880720350710800750 470 265201540675865180 420400 300
75400
100
16 16 75800
720350
710700
42526520
1385615770140420400
30080 710
450
170 1340585755
170 1340585755
280320 2030023046040014030016 16 400 310 71035 80
350-700 25 25 880720450850750850 525 266001540675865180 500500 350 100
a2a1 sm2m1n2n1h3h2h1Pump TypeDimensions (mm)
PNe PNb DNe DNb l1 l2 l3ød lWeight
(kg)165165175
197220230
290330
380
410
395430
570
575700
682
7801190700
11251500
16501100
1400
1435
2000
740
700
150-600 25 25 150 550 560500 300 445 800
400-800 16 16 1120950450880900900 565 2674018458101035220 630600 400 105 3400
900
65250 645 500 1145130 640540 22420360
360 300
500
450500
Note: Dimensions may differ in cast steel and cast bronze pumps. Contact our company for details.
Right reserved to change without notice.No responsibility is accepted because of printing errors.