Pilsa
PP-R and PP-RCT Pipe Systems
Hot and Cold Water Systems and Heating Applications
Product Guide
Pilsa
www.wavin.com.tr 3 Pilsa
PP-R and PP-RCT Product Guide
Pilsa Plastic Products Inc. started production in 1971 and has always been a leader in the plastic sector in Turkey with a wide range of plastic pipe systems which are produced at the com-pany’s manufacturing site in Adana.
In the beginning of January 2008 Pilsa Products Inc. has become a member of WAVIN Group which is located in Netherlands. Wavin is now a global leader in the supply of plastic pipe systems and solutions for both above and below ground applications in projects around the world. Since the 1950’s, we have built an unrivalled reputation for continuous innovation, intelligent problem-solving, dedicated technical support and the highest standards.
Today, as part of the Mexichem Group, around 5,500 Wavin employees deliver the benefits of our technology and service for our customers. We have sales and manufacturing operations in most European countries. Beyond Europe, we maintain an international network of approximately 120 agents, licensees and distributors with representation all over the world.
Quality is number one concern of Pilsa and all products conform with the Turkish Standards DIN Standards. Pilsa Products has received Certificates of Conformity also has ISO 9001 certificate besides TSE, TSEK, GOST-R.
Pilsa is well known throughout Turkey not only with its top quality products, but also with the wide distribution system through the dealers’ network and service organization. Pilsa PP-R Pipes are manufactured in compliance with European / Turkish & German Standards (TS EN ISO 15874), DIN 8077, DIN 8078. Our products are approved and certified by GOST (Russia), Ukrania Standard ( Ukrania), SJJ (CHINA) , Slovakia, Romania, Poland, Bulgaria and have the certificates of guarantee obtained from the Turkish Standards Institute (TSE).
Pilsa PP-R Pipes and Fittings also have the Hygiene certificate.
Extensive Product Range
Above Ground Product Groups:
PPR&PPRCT Pipes & Fittings + Aluminium Foiled PPR Pipes and Composite PPR & PPRCT PipesPEX and Pert Pipes - Covered PEX and Pert Pipes and FittingsOXY PEX and Pert Pipes - Covered OXY PEX and Pert PipesWavin SiTech+ and SiTech B1 low noise systemsWavin Quickstream Rainwater Management SystemsU-PVC Soil and Waste System HepVO Waste Valve
Below Ground Product Groups:
HDPE Corrugated Pipes & FittingsU-PVC Pressure Pipes & FittingsPE Pipes (Pe 32 - Pe 100)Wavin PE Fittings (Electrofusion - Spigot)U-PVC Land Drainage Pipes & FittingsWavin Plastic Manholes (Inspection Chambers) & Fittings Apollo O-PVC Pressure Pipes & Fittings
Fore Word
4 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Being one of the most powerful firms in the country in the plas-tics sector, PILSA gives the utmost importance to quality and:
Uses the most appropriate raw material,Has the most advanced high technology,Produces pipes in compliance with Turkish (TS), European (EN) and German(DIN) Standards,Pipes produced can be used not only to carry water but a wide range of fluids,Has qualified technical staff at your service to solve your problems,Our name stands for quality.
Why Pilsatherm Pipe?
Pilsatherm has got the following advantages:
Not dangerous to human life, non-toxic, non-cancerous,Low cost of transportation, loading and unloading,Has much longer service life compared to other piping systems,Has high resistance against corrosion,Can easily be connected to any kind of pipe. Due to low cost of plumbing, it has a wide range of applications,Water is one of the most important compounds contribu-ting to human life; PILSA. PP-R Pipes carry this vital fluid
to your households in an easy, healthy way at a low cost.
New Pilsa Plus PipesPilsa PLUS is a new product of Wavin Pilsa with improved characteristics. A pipe made of the raw material PP-RCT – the new generation polypropylene designed for hot and cold water systems.
It is the better pipe with higher flow rate, improved pressure resistance and easier to handle.It has improved pressure resistance at higher temperatu-res for long term period.It has 37 % larger inner flow areaLarger inner bore and better flow ratesEasier to carry, install and handlePilsa Plus can be used with all standard Pilsa PP-R fittingsAvailable in different color options
Technical Properties Of Pilsatherm Pipes And Fittings
Raw material: Polypropylene Random Copolymer,Superior physical characteristics at 90°C,High chemical resistance,Definite solutions to calcification and corrosion,No bacteria and moss reproduction within the pipes,Light, easy to install and low labor cost of installation,Safe to use various pressurized liquids and gas, No reduction in diameter at welding points,Longer service life (50 years)Isolation is not necessary in the buildings,SDR 6 Pipes operation pressures: 30 bars at 200C, 15 bars at 600C, 10 bars at 700C for a service life of 50 years.Operation temperature is between 70°C-90°C; it does not absorb water. It can easily be used in hot humid environment.Can be used in drinking water systems and has a quality cer-tificate issued by the Ministry of Health and Hygiene-Institute
New BasaltTherm Pipe
Basalt fiber is made by pulping melted basalt stones of suitable composition. It is very durable and flexible and used in many different industries.Properties of basalt fiber significantly exceed glass fiber.Manufacturing of basalt fiber is very ecological and 100% recyclable4-x lower linear thermal expansion,No need to shave before weldingHigher pressure resistance at higher temperatures by up to 50%Temperature resistance up to 90°C Higher flow rate by up to 20%
Pilsa
www.wavin.com.tr 5 Pilsa
PP-R and PP-RCT Product Guide
PHYSICAL AND MECHANICAL PROPERTIES OF RAW MATERIAL - PP-R
ISOTHERMAL MECHANICAL STRENGTH GRAPHIC FOR PP-R
Properties Testing Conditions UnitTesting Method
Result
MRS Classification20°C, extrapolation 50 years
MPa ISO 9080 10
Density 23°C g/cm3 ISO 1183 0,89 - 0,91
Melting Flow Index MFI
190°C, 5 kgg/10dk g/10min
ISO 1133
0,4 - 0,6
230°C, 2,16 kg 0,2 - 0,5
230°C, 5 kg 0,8 - 1,3
Tensile Stress at Yield23°C, 50 mm/dk50 mm/min
MPa ISO 527 23 - 28
Tensile Strain at Yield23°C, 50 mm/dk50 mm/min
% ISO 527 min %10
Elasticity Modulus23°C, 1 mm/dk1 mm/min
MPa ISO 527 800 - 1000
Charpy Notched Impact Strength
0°C kJ/m2 ISO 179 >3,5
Thermal Conductivity - W/(m K) DIN 52612 0,24
Coefficient of Thermal Expansion (0°C/90°C)
- 1/K DIN 53752 1,5*10-4
Loop
Str
ess
, M
pa
Service Life, Hours
Y
50
40
30
20
10987
6
5
4
3
2
10,1 1 10 100 1 000 10 000 100 000 1 000 000 x1
x2
80 C
90 C95 C
10 C
20 C
30 C
40 C
50 C
60 C
70 C
110 C
1 5 10 25 50 100
PPR
6 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
PHYSICAL AND MECHANICAL PROPERTIES OF RAW MATERIAL - PP-RCT
Properties Testing Conditions UnitTesting Method
Result
MRS Classification20°C, extrapolation 50 years
MPa ISO 9080 11,2
CRS Classification70°C, extrapolation 50 years
MPa ISO 9080 5,3
Density 23°C g/cm3 ISO 1183 0,89 - 0,91
Melting Flow Index MFI
190°C, 5 kgg/10dk g/10min
ISO 1133
0,4 - 0,6
230°C, 2,16 kg 0,2 - 0,5
230°C, 5 kg 0,8 - 1,3
Tensile Stress at Yield23°C, 50 mm/dk50 mm/min
MPa ISO 527 23 - 28
Tensile Strain at Yield23°C, 50 mm/dk50 mm/min
% ISO 527 min %10
Elasticity Modulus23°C, 1 mm/dk1 mm/min
MPa ISO 179 800 - 900
Charpy Notched Impact Strength 0°C kJ/m2 ISO 179 9,5
Izod Notched Impact Strength 0°C kJ/m2 DIN 52612 17
Thermal Conductivity - W/(m K) DIN 52612 0,24
Coefficient of Thermal Expansion (0°C/90°C)
- 1/K DIN 53752 1,5*10-4
ISOTHERMAL MECHANICAL STRENGTH GRAPHIC FOR PP-RCT
Y
50
40
30
20
10987
6
5
4
3
2
10,1 1 10 100 1 000 10 000 100 000 1 000 000 x1
x2
80 C
90 C95 C
10 C
20 C
30 C
40 C
50 C
60 C
70 C
110 C
1 5 10 25 50 100
PPRCT
Loop
Str
ess
, M
pa
Service Life, Hours
Pilsa
www.wavin.com.tr 7 Pilsa
PP-R and PP-RCT Product Guide
OPERATING PARAMETERS FOR PP-R & PP-RCT PIPES
PP-R Pipe / Glass Fiber Reinforced PP-R Pipe / Aluminium Foiled PP-R Pipe
PP-RCT Pipe / Basalt Reinforced PP-RCT Pipe
Operating Pressure Operating Pressure
Temp°C
Life(year)
S 2,5SDR 6
S 3,2SDR 7,4
S 5SDR 11
S 3,2SDR 7,4
S 4SDR 9
S 5SDR 11
10
15102550100
35,133,032,231,130,329,6
27,826,225,624,724,123,5
17,516,516,115,615,214,8
30,229,328,928,428,027,6
24,023,222,922,522,221,9
19,018,418,217,917,7 17,4
20
15102550100
29,928,127,426,425,725,0
23,722,321,721,020,419,9
15,014,113,713,212,912,5
26,325,425,124,624,324,0
20,920,219,919,619,319,0
16,616,015,815,515,315,1
30
15102550100
25,423,823,222,321,721,1
20,218,918,417,717,216,8
12,711,911,611,210,910,6
22,722,021,721,220,920,6
18,117,417,216,916,616,4
14,313,913,613,413,213,0
40
15102550100
21,620,219,618,818,317,8
17,116,015,515,014,514,1
10,810,19,89,49,28,9
19,618,918,618,217,917,6
15,515,014,714,414,214,0
12,311,911,711,511,311,1
50
15102550100
18,217,016,515,915,414,9
14,513,513,112,612,211,8
9,18,58,27,97,77,5
16,716,415,815,515,215,0
13,312,812,612,312,111,9
10,510,110,09,79,69,4
60
15102550
15,414,313,913,312,9
12,211,311,010,510,2
7,77,16,96,66,4
14,213,613,413,112,8
11,210,810,610,410,2
8,98,68,48,28,1
70
15102550
12,912,011,610,08,5
10,39,59,28,06,7
6,56,05,85,04,2
11,911,411,210,910,7
9,49,18,98,78,5
7,57,27,06,96,8
80
151025
10,89,68,16,5
8,67,66,45,1
5,44,84,03,2
9,99,59,39,1
7,97,57,47,2
6,26,05,95,7
957,65,24,3
1510
6,14,1(3,4)
3,82,6(2,2)
7,47,1(6,9)
5,95,6(5,5)
4,74,4(4,3)
*Safety Factor (C): 1,5
8 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
20 25 32 40 50 63 75 90 110 125 160 200
D(mm)
3.4 4.2 5.4 6.7 8.3
10.5 12.5 15.0 18.3 20.8 26.6 33.4
t (mm) (20 Bar)
2,83,54,45,56,98,6
10,312,315,117,121,927,4
t (mm) (16 Bar)
1.9 2.3 2.9 3.7 4.6 5.8 6.8 8.2
10.0 11.4 14.6 18.2
t (mm) (10 Bar)
30504773050492305050630505203050533305054630505653050576305058830506013050611
-
s 5SDR 11PN 10
305048130504963050510305052430505373050555305056930505803050593305060530506133050619
s 3,2SDR 7,4PN 16
305048430504993050513305052830505413050559305057230505833050596305060830506143050620
s 2,5SDR 6PN 20
252010553221111
Bundle
GlassFiber Reinforced PP-R Pipe (4mt)
PilsaTherm Pipe (4mt)
20 25 32 40 50 63 75 920 110 125
3.4 4.2 5.4 6.7 8.3
10.5 12.5 15.0 18.3 20.8
D(mm)
t (mm) (20 Bar)
t (mm) (25 Bar)
3052081305208330520853052087305208830520893052090305209130520923052093
3052080305208230520843052086
- - - - - -
s 3,2SDR 7,4PN 20
s 2,5SDR 6PN 25
2520105532211
Bundle
Aluminium Foiled PP-R Pipe (4mt)
2025324050637590110
3.9 4.7 5.9 7.3 9.0
11.2 13.3 16.4 19.5
3,44,25,46,78,3
10,512,515
18,3
4,15,16,58,1
10,112,715,118,122,1
D(mm)
t (mm) t (mm) (20 Bar)
t (mm) (25 Bar)
305193030519343051938305194230519463051949305195230519553051958
305196030519623051964305196630519683051970305197230519743051976
s 2,5SDR 6PN 20
s 2SDR 5PN 25
201510553221
Bundle
Pipes and fittings
2,83,54,45,5
Pilsa
www.wavin.com.tr 9 Pilsa
PP-R and PP-RCT Product Guide
Pilsa Plus Pipe (4mt)
2025324050637590110125160200
306553030655313065532306553330655343065535306553630655373065538306553930655403065541
252010553221111
s 4SDR 9PN 22
D(mm)
t (mm) Bundle
Basalt Reinforced PP-RCT Pipe (4mt)
D(mm)
2.8 3.5 4.4 5.5 6.9 8.6 8.4
10.1 12.3 14.0
t (mm) Bundle
2025324050637590110125
2520105532211
305214630521473052148305214930521503052151
- - - -
s 3,2SDR 7,4PN 25
- - - - - -
3052152305215330521543052155
s 4SDR 9PN 22
Socket
D(mm)
Sap Codes
2025324050637590110125
3050911305091230509133050914305091530509163050917305091830509193050920
Box
6004002401201004830241010
Bag
504020151066111
2,32,83,64,55,67,18,4
10,112,314
17,922,4
10 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Elbow (90º)
3050934305093630509383050940305094230509443050946305094830509503050952
D(mm)
Sap Codes
45030015080402515844
Box
50502510553111
Bag
2025324050637590110125
Elbow Reducer
Elbow Long
3051217
4049356
D(mm)
D(mm)
Sap Codes
Sap Codes
300
Box
150
Box
30
Bag
25
Bag
25-20
25x1/2
Elbow (Female-Male) 90º
D(mm)
202525/20
305095830509603050961
Sap Codes
500300300
Box
503030
Bag
Sap Codes
ElbowF/M 45°
D(mm)
20 3050959 500
Box
50
Bag
Pilsa
www.wavin.com.tr 11 Pilsa
PP-R and PP-RCT Product Guide
Elbow (45º)
3050933305093530509373050939305094130509433050945
D(mm)
400250120100482418
Box
50502010843
Bag
20253240506375
Sap Codes
Bend
3050962
D(mm)
300
Box
30
Bag
20
Sap Codes
Tee
D(mm)
2025324050637590110125
3050996305099730509983050999305100030510013051002305100330510043051005
2401509050321812643
Box
3025155432111
BagSap Codes
Sap Codes
Cross Tee
30510463051047305104830510493051050
D(mm)
200150905024
Box
25151053
Bag
2025324050
12 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Unequal Tee
30510083051009305101030510113051012305101330510143051015305101630510173051019305102030510213051022305102330510243051025305102630510273051018305102830510293051030305103130510323051033305103430510353051036305103730510383051039305104030510413051042305104330510443051045
D1 D2 D3 Sap Codes
150150150150909090909090325050503250323232323232323232202020202012121212121284
Box
252525251515151515154555454444444442222211111111
Bag
20x25x20 25x20x20 25x25x20 25x20x25 32x20x20 32x20x25 32x20x32 32x25x20 32x25x32 32x25x25 32x50x32 40x20x40 40x25x40 40x32x40 40x50x40 50x32x40 50x40x32 50x32x32 50x40x40 50x32x50 50x40x50 50x50x32 50x50x40 50x20x50 50x25x50 63x20x63 63x25x63 63x32x63 63x40x63 63x50x63 75x20x75 75x25x75 75x32x75 75x40x75 75x50x75 75x63x75 90x75x90 110x90x110
Pipes and fittings
Manchon Union PN 10
D(mm)
20 25 32 40 50
30511743051175305117630511773051178
Box
180120604032
Bag
1510554
Sap Codes
Pilsa
www.wavin.com.tr 13 Pilsa
PP-R and PP-RCT Product Guide
3051112305111330511143051115305111630511173051118305111930511203051121305112230511233051124305112530511263051127305112830511293051130305113130511323051133
D(mm)
56030030024024020020020015012012012080605040362418181813
Box
4030303030202025151010105555421111
Bag
25/2032/2032/2540/2040/2540/3250/2050/2550/3250/4063/2563/3263/4063/5075/5075/6390/6390/75110/63110/75110/90125/110
Female-Male Reducer
Sap Codes
Female-Female Reducer
D(mm)
25/20 32/20 32/25
305113430511353051136
Box
300250250
Bag
302525
Sap Codes
Flange Adaptor
3051165305116630511673051168305116930511703051171
D(mm)
2501508036362012
Box
2515104421
Bag
4050637590110125
Sap Codes
14 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Saddle
30511373051138305113930511403051141305114230511433051144
D(mm)
600600600600600600600600
Box
5050505050505050
Bag
63/2063/2575/2075/2590/2090/25110/20110/25
Sap Codes
Crossover Bridge
D(mm)
202532
305110630511074056716
Sap Codes
15010056
Box
15104
Bag
Bridge
D(mm)
20253240
3051102305110330511043051105
135904527
Box
151053
BagSap Codes
Short Bridge
D(mm)
2025
40478304047831
240150
Box
3025
BagSap Codes
Pilsa
www.wavin.com.tr 15 Pilsa
PP-R and PP-RCT Product Guide
Omega
D(mm)
20253240
3051108305110930511103051111
251584
Box
5311
BagSap Codes
Clips
30509853050986305098730509883050989
D(mm)
1200960500320200
Box
10080504025
Bag
2025324050
Sap Codes
Double Clips
305099030509913050992
D(mm)
500320200
Box
504025
Bag
202532
Sap Codes
End Cap
D(mm)
2025324050637590110
305092130509223050923305092430509253050926305092730509283050929
1008050251010642
Sap Codes
80064040020010080483216
BoxBag
16 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Underplaster Male Elbow
D(mm)
2025
30511473051148
180 180
Box
15 10
BagSap Codes
Underplaster Female Elbow
D(mm)
20 25
3051145 3051146
200 180
Box
20 15
BagSap Codes
Male Threaded End Cap
D(mm)
202532
305093030509313050932
1000640400
Box
1008050
BagSap Codes
Female Threaded Adaptor
20x1/2 20x3/4 25x1/2 25x3/4 32x1 32x3/4
D(mm)
305106830510693051070305107130510723051073
Sap Codes
320240250280120120
Box
202025201010
Bag
Pilsa
www.wavin.com.tr 17 Pilsa
PP-R and PP-RCT Product Guide
Male Threaded Adaptor
305108030510813051082305108330510843051085
D(mm)
250200240150100100
Box
252015151010
Bag
20x1/220x3/425x1/225x3/432x3/432x1
Sap Codes
Female Threaded Tee
Sap CodesD(mm)
20x1/2x2020x3/425x1/2x2525x3/4x2532x1
30510523051053305105430510553051056
20014012012070
Box
2520201510
Bag
Male Threaded Tee
D(mm)
20x1/2x2020x3/425x1/2x2525x3/4x2532x1
30510573051058305105930510603051061
15013010010060
Box
1510101010
BagSap Codes
Female Threaded Elbow
D(mm)
20x1/220x3/425x1/225x3/432x3/432x1
305096330509643050965305096630509673050968
250280160180100100
Box
252020151010
BagSap Codes
18 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Male Threaded Elbow
D(mm)
20x1/220x3/425x1/225x3/432x3/432x1
305096930509703050971305097230509733050974
2001801601408080
Box
251020101010
BagSap Codes
Adjustable Underplaster Female Elbow
D(mm)
20x1/2 3051149
Sap Codes
24
Box
2
Bag
Sap Codes
Double Stable Underplaster Female Elbow
D(mm)
20x1/225x1/2
40478364047837
6060
Box
5 5
Bag
20x1/2
Bide Nozzle Part Female
D(mm)
3051215
Sap Codes
60
Box
10
Bag
Valve
D(mm)
2020x3/4253240x1 1/4
30511793051180305118130511823051183
7070704230
Box
55533
BagSap Codes
Pilsa
www.wavin.com.tr 19 Pilsa
PP-R and PP-RCT Product Guide
Ball Valve
D(mm)
20253240506375
3051192305119330511943069807306980830700793070080
1201208048281512
Box
5554211
BagSap Codes
Chrome Valve
D(mm)
20x1/220x3/42532
3072118305118430511853051186
Sap Codes
60606050
Box
1111
Bag
Chrome Ball Valve
D(mm)
2025
30511873051188
Sap Codes
60 60
Box
1 1
Bag
Decorative Valve
D(mm)
20x1/220x3/42532
3072161305118930511903051191
Sap Codes
60606050
Box
1 1 1 1
Bag
20 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Valve Round Cap
D(mm)
20x1/220x3/425x3/432x1
3072164305274430527453052746
Sap Codes
60606050
Box
1 1 1 1
Bag
Female Threaded Adaptor
D(mm)
20x1/220x3/425x1/225x3/432x140x1 1/450x1 1/263x275x2 1/290x3110x4
30510923051093305109430510953051096305107430510753051076305107730510783051079
120100100100604024141254
Box
10101010101042211
BagSap Codes
Metal Female Threaded Union
D(mm)
20x1/2”25x3/4”32x3/4”32x1”40x1 1/4”50x1 1/2” 63x2”25x3/4” NG*32x1” NG*40x1 1/4” NG*50x1 1/2” NG*
30511513051152305115330511543051155305115630511573051207305120830512093051210
12080606024241880602424
Box
101055222
10522
BagSap Codes
*NG codes have less weight than others
Pilsa
www.wavin.com.tr 21 Pilsa
PP-R and PP-RCT Product Guide
Metal Male Threaded Union
*NG codes have less weight than others
D(mm)
20x1/2”25x3/4”32x3/4”32x1”40x1 1/4”50x1 1/2” 63x2”25x3/4” NG*32x1” NG*40x1 1/4” NG*50x1 1/2” NG*
30511583051159305116030511613051162305116330511643051211305121230512133051214
Sap Codes
12080505024201680502420
Box
101055222
10522
Bag
Male Threaded Adaptor Soc.
D(mm)
20x1/2”20x3/4”25x1/2”25x3/4”32x1”40x1 1/4”50x1 1/2”63x2”75x2 1/2”90x3”110x4”
30510973051098305109930511003051101305108630510873051088305108930510903051091
Sap Codes
100 80808040251610653
Box
101010105521111
Bag
Male Threaded Tee Soc.
D(mm)
20x1/2”25x1/2”25x3/4”
305106530510663051067
806060
Box
10 10 10
BagSap Codes
PP-V Radiator Valve-Elbow
D(mm)
20 4047844 80
Box
5
BagSap Codes
22 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
PP-V Radiator Valve
Sap CodesD(mm)
20 4047845 80
Box
5
Bag
Adaptor With Nut
D(mm)
20x1/225x3/4
30511993051200
Sap Codes
120120
Box
1010
Bag
Elbow With Nut
D(mm)
20x1/225x3/4
30512013051202
Sap Codes
100100
Box
10 10
Bag
Loose Nut Adaptor
D(mm)
20x1/225x3/4
30511723051173
Sap Codes
300300
Box
30 30
Bag
Male Filter
D(mm)
30512033051204
200120
Box
20 10
Bag
20x1/225x3/4
Sap Codes
Pilsa
www.wavin.com.tr 23 Pilsa
PP-R and PP-RCT Product Guide
Shifting Nipple
D(mm)
20x1/220x3/425x1/225x3/4
4047817404781840478194047820
Sap Codes
120120120120
Box
10101010
Bag
Welding Machine Set
D(mm)
16-4050-110
30332363040363
51
Sap Codes Box
Welding Head
D(mm)
2025324050637590110125
3033427303342830334293033430303343130334323033433303343430334353033436
50505050503030302010
Sap Codes Box
Welding Head For Saddle
D(mm)
63 3033487 1
Sap Codes Box
24 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Shaver
D(mm)
20-2532-4050-637575-90110
304036530403663040367304036840467494046750
10010010010010020
Sap Codes Box
Cutter
D(mm)
4047816
Sap Codes
20
Box
10
Bag
40-63
Pilsa
www.wavin.com.tr 25 Pilsa
PP-R and PP-RCT Product Guide
26 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
50%
°C
%
9020
Higher pressure resistance at higher temperatures by up to 50%
Temperatures resistance up to 90°C
Higher flow rate by up to 20%
+
Key benefits of Wavin Pilsa BASALTTHERM® are;• 4-x lower linear thermal expansion• No need to shave before welding
Benefits of BASALTTHERM®
What is BASALTTHERM® ?BASALTTHERM® is the latest development of Wavin Pilsa. A state of the art pipe made from the new generation materials PP-RCT and Basalt fiber. An unique pipe designed for hot and cold water and central heating systems.
Wavin PE-RT and Oxygen Barried PE-RT Pipe
CONNECT TO BETTER
the most flexible heating system
The term PE-RT pipe is short for heat-resistant PE pipe. (PE Raised Temperature)
Wavin uses new generation Type 2 PE-RT with raised pressure strength as a raw material in its manufacturing.
The raw PE-RT ensures long-term hydrostatic strength at high temperatures without any of the crosslinking observed in Pex pipes.
As it does not contain any chemical additive resulting in crosslinking, it is suitable for use with potable water and does not pose any threat to human health.
Packaged in a coil Wavin PE-RT pipes have a very flexible structure and can be installed relatively easily.
Surface layer: Special layer preventing the permeability of oxygen
Internal layer: PE-RT layer resistant to high temperature and pressure
1
2
Thanks to their special formulated layer, Wavin Oxy PE-RT pipes protect metal components installed in the system such as pumps, valves and radiators against corrosion by preventing the permeability of oxygen at a level close to 100%. Thus, the life of the system components is extended, while repair and maintenance costs are minimized.
www.wavin.com.tr
Water management | Heating and cooling | Water and gas distributionWaste water drainage | Datacom
Wavin TR Plastik Sanayi A.Ş. | Güzelevler Mah.Girne Bulvarı No: 294/A Yüreğir / Adana | Web www.wavin.com.tr | E-mail [email protected]
Wavin operates a programme of continuous product development, and therefore reserves the right to modify or amend the specification of their products without notice. All information in this publication is given in good faith, and believed to be correct at the time of going to press. However, no responsibility can be accepted for any errors, omissions or incorrect assumptions. Users should satisfy themselves that products are suitable for the purpose and application intended.
© 2016 WavinWavin reserves the right to make alterations without prior notice. Due to continuous product development, changes in technical spefications may change. Installation must comply with the installation instructions.
Pilsa