product guide pp-r and pp-rct pipe systemsppr & pprct pipes pex and pert pipes - covered pex and...

Pilsa

PP-R and PP-RCT Pipe Systems

Hot and Cold Water Systems and Heating Applications

Product Guide

About Wavin Pilsa

Pilsa Plastic Products Inc. started production in 1971 and has always been a leader in the plastic sector in Turkey with a wide range of plastic pipe systems which are produced at the company’s manufacturing site in Adana.

In the beginning of January 2008 Pilsa Products Inc. has become a member of WAVIN Group which is located in Netherlands. Wavin is now a global leader in the supply of plastic pipe systems and solutions for both above and below ground applications in projects around the world. Since the 1950’s, we have built an unrivalled reputation for continuous innovation, intelligent problem-solving, dedicated technical support and the highest standards.

Today, as part of the Mexichem Group, around 5,500 Wavin employ-ees deliver the benefits of our technology and service for our custo-mers. We have sales and manufacturing operations in most European countries. Beyond Europe, we maintain an international network of approximately 120 agents, licensees and distributors with represen-tation all over the world.

Quality is number one concern of Pilsa and all products conform with the Turkish Standards and DIN Standards. Pilsa Products has received Certificates of Conformity also has ISO 9001 certificate besides TSE, TSEK, GOST-R.

Pilsa is well known throughout Turkey not only with its top quality pro-ducts, but also with the wide distribution system through the dealers’ network and service organization. Pilsa PP-R Pipes are manufactured in compliance with European / Turkish & German Standards (TS EN ISO 15874), DIN 8077, DIN 8078. Our products are approved and certified by GOST (Russia), Ukrania Standard (Ukrania), AENOR (Spain), DVGW (Germany) Bulgaria and have the certificates of guarantee obtained from the Turkish Standards Institute (TSE).

4 O

cak

2019

Pilsa

www.wavin.com.tr 3 Pilsa

PP-R and PP-RCT Product Guide

Extensive Product Range

Above Ground Product Groups:

PPR&PPRCT Pipes & Fittings + (PPR Pipes) and Composite PPR & PPRCT PipesPEX and Pert Pipes - Covered PEX and Pert Pipes and FittingsOXY PEX and Pert Pipes - Covered OXY PEX and Pert PipesWavin SiTech+ and SiTech B1 low noise systemsWavin Quickstream Rainwater Management SystemsU-PVC Soil and Waste System HepVO Waste Valve

Below Ground Product Groups:

HDPE Corrugated Pipes & FittingsU-PVC Pressure Pipes & FittingsPE Pipes (PE 32 - PE 100)Wavin PE Fittings (Electrofusion - Spigot)Wavin Plastic Manholes (Inspection Chambers) & Fittings Apollo O-PVC Pressure Pipes & Fittings

In our Turkey plant, we have Wavin Academy training center. It was established in 2014 in Adana in order to introduce our tech-nology and innovations to our customers in the shortest time and to provide the necessary solutions to the plastic pipe systems.

With help of Wavin Academy, which is the first in our sector, we traine the plumbers, technicians, installers, engineers, students, merchants and other solution partners in the sector.

4 Tel. +90 322 999 10 00 Pilsa


Being one of the most powerful firms in the country in the plas-tics sector, PILSA gives the utmost importance to quality and:

Uses the most appropriate raw material,Has the most advanced high technology,Produces pipes in compliance with Turkish (TS), European (EN) and German(DIN) Standards,Pipes produced can be used not only to carry water but a wide range of fluids,Has qualified technical staff at your service to solve your problems,Our name stands for quality.

Why Pilsatherm Pipe?

Pilsatherm has got the following advantages:

Not dangerous to human life, non-toxic, non-cancerous,Low cost of transportation, loading and unloading,Has much longer service life compared to other piping systems,Has high resistance against corrosion,Can easily be connected to any kind of pipe. Due to low cost of plumbing, it has a wide range of applications,Water is one of the most important compounds contribu-ting to human life; PILSA. Pipes carry this vital fluid

to your households in an easy, healthy way at a low cost.

New Pilsa Plus PipesPilsa PLUS is a new product of Wavin Pilsa with improved characteristics. A pipe made of the raw material PP-RCT the new generation polypropylene designed for hot and cold water systems.

It is the better pipe with higher flow rate, improved pres-sure resistance and easier to handle.It has improved pressure resistance at higher temperatu-res for long term period.It has 37 % larger inner flow areaLarger inner bore and better flow ratesEasier to carry, install and handlePilsa Plus can be used with all standard Pilsa PP-R fittingsAvailable in different color options

Technical Properties Of Pilsatherm Pipes And Fittings

Raw material: Polypropylene Random Copolymer,Superior physical characteristics at 90°C,High chemical resistance,Definite solutions to calcification and corrosion,No bacteria and moss reproduction within the pipes,Light, easy to install and low labor cost of installation,Safe to use various pressurized liquids and gas, No reduction in diameter at welding points,Longer service life (50 years)Isolation is not necessary in the buildings,SDR 6 Pipes operation pressures: 30 bars at 20°C, 15 bars at 60°C, 10 bars at 70°C for a service life of 50 years.Operation temperature is between 70°C-90°C; it does not absorb water. It can easily be used in hot humid environment.Can be used in drinking water systems and has a quality cer-tificate issued by the Ministry of Health and Hygiene-Institute

New BasaltTherm Pipe

Basalt fiber is made by pulping melted basalt stones of suitable composition. It is very durable and flexible and used in many different industries.Properties of basalt fiber significantly exceed glass fiber.Manufacturing of basalt fiber is very ecological and 100% recyclable4-x lower linear thermal expansion,No need to shave before weldingHigher pressure resistance at higher temperatures by up to 50%Temperature resistance up to 90°C Higher flow rate by up to 20%

Pilsa



PHYSICAL AND MECHANICAL PROPERTIES OF RAW MATERIAL - PP-R

ISOTHERMAL MECHANICAL STRENGTH GRAPHIC FOR PP-R

Properties Testing Conditions Unit Testing Method Result

MRS Classification20°C, extrapolation 50 years

MPa ISO 9080 10

Density 23°C g/cm3 ISO 1183 0,89 - 0,91

Melting Flow Index MFI

190°C, 5 kgg/10dk g/10min

ISO 1133

0,4 - 0,6

230°C, 2,16 kg 0,2 - 0,5

230°C, 5 kg 0,8 - 1,3

Tensile Stress at Yield23°C, 50 mm/dk50 mm/min

MPa ISO 527 23 - 28

Tensile Strain at Yield23°C, 50 mm/dk50 mm/min

% ISO 527 min %10

Elasticity Modulus23°C, 1 mm/dk1 mm/min

MPa ISO 527 800 - 1000

Charpy Notched Impact Strength 0°C kJ/m2 ISO 179 >3,5

Thermal Conductivity - W/(m K) DIN 52612 0,24

Coefficient of Thermal Expansion (0°C/90°C)

- 1/K DIN 53752 1,5*10-4

Loop

Str

ess

, M

pa

Service Life, Hours

Y

50

40

30

20

10987

6

5

4

3

2

10,1 1 10 100 1 000 10 000 100 000 1 000 000 x1

x2

80 C

90 C95 C

10 C

20 C

30 C

40 C

50 C

60 C

70 C

110 C

1 5 10 25 50 100

PPR

6 Tel. +90 322 999 10 00 Pilsa


PHYSICAL AND MECHANICAL PROPERTIES OF RAW MATERIAL - PP-RCT

ISOTHERMAL MECHANICAL STRENGTH GRAPHIC FOR PP-RCT

Y

50

40

30

20

10987

6

5

4

3

2

10,1 1 10 100 1 000 10 000 100 000 1 000 000 x1

x2

80 C

90 C95 C

10 C

20 C

30 C

40 C

50 C

60 C

70 C

110 C

1 5 10 25 50 100

PPRCT

Loop

Str

ess

, M

pa

Service Life, Hours

Properties Testing Conditions Unit Testing Method Result

MRS Classification20°C, extrapolation 50 years

MPa ISO 9080 11,2

CRS Classification70°C, extrapolation 50 years

MPa ISO 9080 5,3

Density 23°C g/cm3 ISO 1183 0,89 - 0,91

Melting Flow Index MFI

190°C, 5 kgg/10dk g/10min

ISO 1133

0,4 - 0,6

230°C, 2,16 kg 0,2 - 0,5

230°C, 5 kg 0,8 - 1,3

Tensile Stress at Yield23°C, 50 mm/dk50 mm/min

MPa ISO 527 23 - 28

Tensile Strain at Yield23°C, 50 mm/dk50 mm/min

% ISO 527 min %10

Elasticity Modulus23°C, 1 mm/dk1 mm/min

MPa ISO 179 800 - 900

Charpy Notched Impact Strength 0°C kJ/m2 ISO 179 9,5

Izod Notched Impact Strength 0°C kJ/m2 DIN 52612 17

Thermal Conductivity - W/(m K) DIN 52612 0,24

Coefficient of Thermal Expansion (0°C/90°C)

- 1/K DIN 53752 1,5*10-4

Pilsa



OPERATING PARAMETERS FOR PP-R & PP-RCT PIPES

PP-R Pipe Glass Fiber Reinforced PP-R Pipe

PP-RCT Pipe / Basalt Reinforced PP-RCT Pipe

Operating Pressure Operating Pressure

Temp°C

Life(year)

S 2,5SDR 6

S 3,2SDR 7,4

S 5SDR 11

S 3,2SDR 7,4

S 4SDR 9

S 5SDR 11

10

15102550100

35,133,032,231,130,329,6

27,826,225,624,724,123,5

17,516,516,115,615,214,8

30,229,328,928,428,027,6

24,023,222,922,522,221,9

19,018,418,217,917,7 17,4

20

15102550100

29,928,127,426,425,725,0

23,722,321,721,020,419,9

15,014,113,713,212,912,5

26,325,425,124,624,324,0

20,920,219,919,619,319,0

16,616,015,815,515,315,1

30

15102550100

25,423,823,222,321,721,1

20,218,918,417,717,216,8

12,711,911,611,210,910,6

22,722,021,721,220,920,6

18,117,417,216,916,616,4

14,313,913,613,413,213,0

40

15102550100

21,620,219,618,818,317,8

17,116,015,515,014,514,1

10,810,19,89,49,28,9

19,618,918,618,217,917,6

15,515,014,714,414,214,0

12,311,911,711,511,311,1

50

15102550100

18,217,016,515,915,414,9

14,513,513,112,612,211,8

9,18,58,27,97,77,5

16,716,415,815,515,215,0

13,312,812,612,312,111,9

10,510,110,09,79,69,4

60

15102550

15,414,313,913,312,9

12,211,311,010,510,2

7,77,16,96,66,4

14,213,613,413,112,8

11,210,810,610,410,2

8,98,68,48,28,1

70

15102550

12,912,011,610,08,5

10,39,59,28,06,7

6,56,05,85,04,2

11,911,411,210,910,7

9,49,18,98,78,5

7,57,27,06,96,8

80

151025

10,89,68,16,5

8,67,66,45,1

5,44,84,03,2

9,99,59,39,1

7,97,57,47,2

6,26,05,95,7

957,65,24,3

1510

6,14,1(3,4)

3,82,6(2,2)

7,47,1(6,9)

5,95,6(5,5)

4,74,4(4,3)

*Safety Factor (C): 1,5

8 Tel. +90 322 999 10 00 Pilsa


2025324050637590110125160200

D(mm)

3.4 4.2 5.4 6.7 8.3

10.5 12.5 15.0 18.3 20.8 26.6 33.2

t (mm) (20 Bar)

2,83,54,45,56,98,6

10,312,315,117,121,927,4

t (mm) (16 Bar)

1.9 2.3 2.9 3.7 4.6 5.8 6.8 8.2

10.0 11.4 14.6 18.2

t (mm) (10 Bar)

s 5SDR 11PN 10

s 3,2SDR 7,4PN 16

s 2,5SDR 6PN 20

252010553221111

Bundle

GlassFiber Reinforced PP-R Pipe (4mt)

PilsaTherm Pipe (4mt)

2025324050637590110125

3.4 4.2 5.4 6.7 8.3

10.5 12.5 15.0 18.3 20.8

D(mm)

t (mm) (25 Bar)

3052111305211430521163052118305211930521203052121305212230521233052124

s 2,5SDR 6PN 25

2520105532211

Bundle

Pipes and fittings

Pilsa Plus Pipe (4mt)

2025324050637590110125

3065552306555330655543065555306555630655573065558306555930655603065561

2520105532211

s 4SDR 9PN 22

D(mm)

t (mm) Bundle

2,32,83,64,55,67,18,4

10,112,314

3040240 3050623 30506303040241 3050638 30506443040242 3050652 30506583040243 3050666 30506703040244 3050676 3050680- 3050686 30506903040246 3050695 30506993040247 - 30402693040248 3050712 3040270- 3050721 30402713050724 - 3050725- - 3050726

- upon request

Pilsa



Basalt Reinforced PP-RCT Pipe (4mt)

D(mm)

2.8 3.5 4.4 5.5 6.9 8.6 8.4

10.1 12.3 14.0

t (mm) Bundle

2025324050637590110125

2520105532211

s 3,2SDR 7,4PN 25

s 4SDR 9PN 22

Socket

DN Sap Code

2025324050637590110125

3040349304035030403513040352304035330403543040355304035630403573040358

Box d (mm)

d(mm)

L1(min.)(mm)

L1(min.)(mm)

D(mm)

D(mm)

A(mm)

L(mm)

k(mm)

6004002401201004830241010

Bag

504020151066111

3052409 3052410 3052411 3052412 3052413 30524143052415 3052416 3052417 3052418

Elbow (90º)

3040127304012830401293040130304013130401323040133304013430401353040136

DN Sap Code

45030015080402515844

Box

50502510553111

Bag

2025324050637590110125

19,50 14,50 28 33 424,50 16,00 34 37 431,50 18,00 42,5 41 439,40 20,50 53 46 4,549,40 23,50 66 52 4,562,50 27,50 83 60 4,574,70 30,00 100 65 589,20 33,00 120 71,5 6109,00 37,00 146 80 6124,60 40,00 167 86 6

19,5 14,5 28 25,524,5 16 33 29,531,5 18 43,5 3539,4 20,5 53 41,549,4 23,5 67 5062,5 27,5 83,5 6074,7 30 100 6889,2 33 120 78,5109 37 147 92,5124,6 40 168 102

10 Tel. +90 322 999 10 00 Pilsa


Pipes and fittings

Elbow Long

4049357

DN Sap Code

150 75

Box

25

Bag

25x1/2

Elbow (Female-Male) 90º

DN

202525/20

304013730401383040139

Sap Code

500300300

Box

503030

Bag

Elbow (45º)

3040119304012030401213040122304012330401243040125

DN

400250120100482418

Box d (mm)

d1(mm)

d1(mm)

L1(min.)(mm)

L1(min.)(mm)

L1(min.)(mm)

D(mm)

d2(mm)

d2(mm)

L2(min.)(mm)

L2(min.)

A(mm)

D(mm)

D

A(mm)

A

50502010843

Bag

20253240506375

Sap Code

Elbow with Reducer

3051268

DN Sap Code

300

Box

30

Bag

25-20

19,5 14,5 26,5 2024,5 16 33,5 2231,5 18 43,5 3239,4 20,5 52,5 3149,4 23,5 68 3562,5 27,5 84 42,574,7 30 100 47

19,5 14,5 20 15 28,5 2524,5 16 25 15,5 33,5 29,524,5 16 20 15,5 33 29,5

19,5 14,5 25 16 33

24,5 16 35 42 32

d1 L1(min.)(mm)

D1(mm)

D2(mm)

A1(mm)

A2(mm)

G(mm)

1/2"

29,5

Pilsa



Bend

3051238-

DN

300180

Box

3020

Bag

2025

Sap Code

Tee

DN

2025324050637590110125

3040177304017830401793040180304018130401823040183304018430401853040186

2401509050321812643

Box

3025155432111

BagSap Code

Sap Code

Cross Tee

30401093040110304011130401123040113

DN

200150905024

Box

25151053

Bag

2025324050

Manchon Union PN 10

DN

2025324050

30403893040390304039130403923040393

Box d(mm)

L(mm)

180120604032

Bag

1510554

Sap Code

19,5 14,5 28 50,5 7024,5 16 35 63,5 88

d1(mm)

L1(min.)(mm)

D(mm)

L2(min.)(mm)

L(mm)

19,5 14,5 27 51,5 2624,5 16 33 63 3031,5 18 43 72 3639,4 20,5 53 85 43,549,4 23,5 66,5 100 5062,5 27,5 84,5 119,5 6074,7 30 100 130 7389,2 33 120 158 79109 37 146 186 93124,6 40 167 208 103,5

d(mm)

d(mm)

L1(min.) (mm)

D (mm)

L (mm)

L2 (mm)

L1(min.) (mm)

D(mm)

L(mm)

A(mm)

19,5 14,5 26,5 51 5124,5 16 33 60 6031,5 18 42,5 70 7039,4 20,5 53 84 8449,4 23,5 66,5 103,5 103,5

19,5 4124,5 5131,5 6339,4 7149,4 74

- upon request

12 Tel. +90 322 999 10 00 Pilsa


Unequal Tee

30402743040275304027730402763040279304028230402783040283304028130402803040284304028530402863040287304028830402933051242304029430402963040297304029530402893040290304029830402913040299304030030403013040302304030330403043040305304030630403073040308304030930403103040311

D1 D2 D3 Sap Code

150150150150909090909090325050503250323232323232323232202020202012121212121284

Box

19,524,524,524,531,531,531,531,531,531,531,539,439,439,439,449,449,449,449,449,449,449,449,449,449,462,562,562,562,562,574,774,774,774,774,774,789,2109

14,516161818181818181818

20,520,520,520,523,523,523,523,523,523,523,523,523,523,527,527,527,527,527,53030303030303337

333533

33,542,543

42,542,54343655353536666

66,566,566656566

65,566,566,5848484

83,583,5100100100100100100120146

24,519,519,524,519,519,519,524,524,524,549,419,524,531,549,431,539,431,539,431,539,449,449,419,524,519,524,531,539,449,419,524,531,539,449,462,574,789,2

1614,514,516

14,514,514,5161616

23,514,51618

23,518

20,518

20,518

20,523,523,514,516

14,51618

20,523,514,51618

20,523,527,53033

33,528

26,533,542,542,527

42,5433465333343

65,565,566

65,565,5515266653333

26,533

42,5536633335353

83,583,5120146

19,519,524,519,519,524,531,519,524,531,531,539,439,439,439,439,431,531,539,449,449,431,539,449,449,462,562,562,562,562,574,774,774,774,774,774,789,2109

14,514,516

14,514,51618

14,5161818

20,520,520,520,520,51818

20,523,523,518

20,523,523,527,527,527,527,527,53030303030303337

332833

33,542,543

42,542,54343655353536666

66,566,566656566

65,566,566,5848484

83,583,5100100100100100100120146

65535565

73,573,560

73,56610365,57070801031031031031049090

103,5103,5

8585808591101112130130130130130130158186

d1 L1(min.)(mm)

(mm)

(mm) (mm)(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)D1 d2 L2(min) D2 d3 L3(min) D3 L

d1 L1 (min.)(mm)

d2(mm)

L2 (min)(mm)

D1(mm)

D2(mm)

L(mm)

37,527,528,535,540,540,531,5404035

54,538,538,541

54,554,555,555,555,549,549,555

54,5444452525254576060606068687993

A

252525251515151515154555454444444442222211111111

Bag

20/25/2025/20/2025/20/2525/25/2032/20/2032/20/2532/20/3232/25/2032/25/2532/25/3232/50/3240/20/4040/25/4040/32/4040/50/4050/20/5050/25/5050/32/3250/32/4050/32/5050/40/3250/40/4050/40/5050/50/3250/50/4063/20/6363/25/6363/32/6363/40/6363/50/6375/20/7575/25/7575/32/7575/40/7575/50/7575/63/7590/75/90110/90/110

Pipes and fittings

25/2032/2032/25

304031230512463040313

Female-Female Reducer

DN Box

300250250

Bag

302525

Sap Code

24,5 16 19,5 14,5 35 32,5 3931,5 18 19,5 14,5 43 41 48,531,5 18 24,5 16 43 41 48,5

Pilsa



Flange Adaptor

3040196304019730401983040199304020030402013040202

DN

2501508036362012

Box

2515104421

Bag

4050637590110125

Sap Code

39,449,462,574,789,2109

124,6

20,523,527,530333740

50,561,577

90,5109132164

6273,590,5106

124,5150,5185

2427

31,538

42,55062

8,58,5816182120

d L1(min.) D1 D2 L k

3040315304031730403163040318304031930403203040321304032230403233040324304032530403263040327304032830403293040330304033130403323040333304033430403353040336

DN

56030030024024020020020015012012012080605040362418181813

Box

4030303030202025151010105555421111

Bag d1 L1(min) d2 L2(min.) D L

25/2032/2032/2540/2040/2540/3250/2050/2550/3250/4063/2563/3263/4063/5075/5075/6390/6390/75110/63110/75110/90125/110

Female-Male Reducer

Sap Code

19,519,524,519,524,531,519,524,531,539,424,531,539,449,449,462,562,574,762,574,789,2109

14,514,516

14,51618

14,51618

20,51618

20,523,523,527,527,530

27,53033

37w

253232404040505050506363636375759090

110110110125

1813,515,525

24,527,523,523,523,524,528

28,5282831262833

32,532,532,537

293535

30,535,542,52934

42,553,534,543,56367

75,584,59198

111111119147

3939

39,547,5484748

49,547,548

56,557,55353

61,567

76,581,588

91,593,5102

Saddle

30403373040338304033930403403040341304034230403433040344

DN

600600600600600600600600

Box

5050505050505050

Bag

63/2063/2575/2075/2590/2090/25110/20110/25

Sap Code d0 d1 d2 D1 D2 kL1(min.)

63 19,5 14,5 17 28,5 37 675 19,5 14,5 17 28,5 37 690 19,5 14,5 17 28,5 37 6110 19,5 14,5 17 28,5 37 663 24,5 16 19 33,5 37,5 675 24,5 16 19 33,5 37,5 690 24,5 16 19 33,5 37,5 6110 24,5 16 19 33,5 37,5 6

(mm)

(mm)

(mm) (mm) (mm) (mm) (mm) (mm) (mm)

(mm)

(mm)

(mm)

(mm) (mm) (mm) (mm)

(mm) (mm) (mm)

14 Tel. +90 322 999 10 00 Pilsa


19,5 14,5 28 16024,5 16 32,5 20319,5 14,5 28 16524,5 16 32,5 212

Pipes and fittings

Crossover Bridge

Short Bridge

DN

2025

40478324047833

240150

Box

3025

BagSap Code

Tee w/ V Type Bridge

Omega

DN

DN

20/20/2025/25/2525/20/2532/25/32

20253240

3075009307501030750113075012

3040105304010630401073040108

1001005050

251584

Box

Box d

Ad

101055

5311

Bag

Bag

Sap Code

Sap Code

DN

202532

305124430512454056717

Sap Code

15010056

Box

15104

Bag

Bridge

DN

20253240

3040115304011630401173040118

135904527

Box

151053

BagSap Code

Clips

30402323040233304023430402353040236

DN

1200960500320200

Box

10080504025

Bag

2025324050

Sap Code

19,5 14,5 28 23 9024,5 16 33,5 31 96

d

d1

L1(min.)

L1(min.)

D

D1 D2

A L

L

19,5 14,5 28,5 160 3324,5 16 33 194 4031,5 18 46 216 49

d1

d L

L1(min.) D L A

20 4525 5532 6940 85

19,5 14,5 28 16024,5 16 32,5 20319,5 14,5 28 16524,5 16 32,5 212

20253240

20,5 1925,5 2232,5 2540,5 2948,5 44

(mm)

(mm)

(mm)

(mm)

(mm)

(mm) (mm)

(mm) (mm) (mm) (mm)

(mm) (mm) (mm) (mm)

(mm)

(mm) (mm) (mm) (mm)

20252025

Pilsa



End Cap

DN

2025324050637590110

304016730401683040169304017030401713040172304017330401743040175

1008050251010642

Sap Code

80064040020010080483216

BoxBag

Male Threaded End Cap

DN

20x1/225x3/432x1

304020530402063040207

1000640400

Box

1008050

BagSap Code

Female Threaded Adaptor

20x1/220x3/425x1/225x3/432x3/432x1

DN

304002430400253040026304002730400283040049

Sap Code

320240250280120120

Box

202025201010

Bag

Female Threaded Adaptor (Hexagonal Shaped)

DN

40x1 1/450x1 1/263x275x2 1/290x3110x4

304005030400513040052304005330400543040055

4024141254

Box

1042211

BagSap Code

Double Clips

304023730402383040239

DN

500320200

Box

504025

Bag

202532

Sap Code

20 38 17,525 44,5 19,532 53,5 25

d A1 A2

d D L

L1 L G

19,5 28,5 25,524,5 34,5 2931,5 43 3239,4 53,5 37,549,4 67 43,562,5 85 5274,7 100,5 5889,2 121 64109 146,5 71,5

11 34 1/2"11 31 3/4"20 40 1"

19,5 14,5 28,5 38,5 24 40,5 1/2''19,5 14,5 29 42,5 24 40 3/4''24,5 16 33,5 38 24 40,5 1/2''24,5 16 33 42,5 24 40,5 3/4''31,5 18 43 45,5 24,5 44 3/4''31,5 18 43 53 28 47,5 1''

d1 D1 D2 L2

d1 D1 L2 L3

L1 (min)

L1(min)

L G

L G

39,4 20,5 54 25,5 47 61 1-1/4''49,4 23,5 68 29 53,5 67,5 1-1/2''62,5 27,5 84 28,5 55 73 2''74,7 30 100 30 59,5 78 2-1/2''89,2 33 120,5 44 75,5 92 3''109 37 147 48 84 102 4''

(mm)

(mm)

(mm)

(mm)


(mm) (mm) (mm) (mm) (mm)(mm)

(mm) (mm)

(mm)

(mm) (mm)

(mm)

16 Tel. +90 322 999 10 00 Pilsa


Pipes and fittings

Male Threaded Adaptor

304006230400633040064304006530400663040067

DN

250200240150100100

Box d1

d1

L1(min)

L1(min)

D1

D1 L2 L3 L G

D2 L L2 L3 G

d1

d1

d1

L1(min)

L1(min)

L1(min)

D1

D1

D1

D2

D2

D2

A

A1

A1

L

A2

A2

G

L G

G

252015151010

Bag

20x1/220x3/425x1/225x3/432x3/432x1

Sap Code

Male Threaded Tee

DN

20x1/2x2020x3/425x1/2x2525x3/4x2532x1

30402083040209304021030402113040212

15013010010060

Box

1510101010

BagSap Code

Female Threaded Tee

Sap CodeDN

20x1/2x2020x3/425x1/2x2525x3/4x2532x1

30401873040188304018930401903040191

20014012012070

Box

2520201510

Bag

Female Threaded Elbow

DN

20x1/220x3/425x1/225x3/432x3/432x1

304014230401433040144304014530401463041449

250280160180100100

Box

252020151010

BagSap Code

Male Threaded Adaptor (Hexagonal Shaped)

DN

40x1 1/4”50x1 1/2”63x2”75x2 1/2”90x3”110x4”

304006830400693040070304007130400723040073

Sap Code

251610653

Box

521111

Bag

19,5 14,5 28,5 35 53 24 40 1/2''19,5 14,5 29 42,5 53 23,5 40 3/4''24,5 16 34 39 53 23,5 40 1/2''24,5 16 33 42 53 24 40 3/4''31,5 18 43 45 57 24,5 44 3/4''31,5 18 43 52,5 62,5 28 47 1''

19,5 14,5 27 38,5 35 51,5 1/2''19,5 14,5 28,5 43 36 60,5 3/4''24,5 16 33 38 37 60 1/2''24,5 16 35 43 37,5 60 3/4''31,5 16 43 53,5 43 70 1''

19,5 14,5 27 38,5 35 47,5 51,5 1/2''19,5 14,5 28,5 43 36,5 49,5 60,5 3/4''24,5 16 33 38 37 50,5 60 1/2''24,5 16 35 43 37,5 50,5 60 3/4''31,5 16 43 53,5 43 58 70 1''

19,5 14,5 28,5 38,5 31,5 36 1/2''19,5 14,5 29 40 31 35,5 3/4''24,5 16 33,5 38,5 32 38 1/2''24,5 16 33,5 43 32 40 3/4''31,5 18 44 57,5 34 45 3/4"31,5 18 43,5 54 34 45 1"

39,4 20,5 54 25 47 81 1-1/4''49,4 23,5 68 29 53,5 87,5 1-1/2''62,5 27,5 84 28,5 55 98 2''74,7 30 100 30 59,5 105 2-1/2''89,2 33 120,5 43,5 76 118 3''109 37 147 48 84,5 129,5 4''

(mm)

(mm)

(mm)

(mm)

(mm) (mm) (mm) (mm) (mm) (mm)(mm)


(mm)

(mm) (mm) (mm) (mm) (mm) (mm)

(mm) (mm) (mm) (mm) (mm)


Pilsa



Male Threaded Elbow

DN

20x1/220x3/425x1/225x3/432x3/432x1

304015430401553040156304015730512393040158

2001801401608080

Box

251010201010

BagSap Code

Adjustable Underplaster Female Elbow

DN

20x1/225x1/2

30400814064856

Sap Code

3636

Box

33

Bag

Sap Code

Double Stable Underplaster Female Elbow

DN

20x1/225x1/2

40478384047839

6060

Box

5 5

Bag

Underplaster Female Elbow

DN

20 25

30403843040385

200 180

Box

20 15

BagSap Code

Underplaster Male Elbow

DN

20 25

30403873040388

180180

Box

1510

BagSap Code

19,5 14,5 28 38,5 31 35 1/2"24,5 16 33 38,5 31,5 36 1/2"

d1

d1

D1

D1

D2

D2

A1

A1

A2

A2

G

A3 G

L1(min)

L1(min)

d1

d1

D1

D1

A1

A1

A2

A2

A3 L H G

G

L1(min)

L1(min)

19,5 14,5 28 38,5 31 35 48 1/2"24,5 16 33 38,5 31 36 49 1/2"

19,5 14,5 28,5 38,5 31,5 36 49 1/2''19,5 14,5 29 40 31 36 48 3/4''24,5 16 33,5 38,5 32 38 51 1/2''24,5 16 33,5 43 32 40 53 3/4''31,5 18 43,5 57,5 34,5 45 58 3/4"31,5 18 43,5 54 34,5 45 62 1"

d1 L1(min) D1 D2 A1 A2 A3 G

19,5 14,5 33 37 113 150 224 38 1/2"24,5 16,5 33 37 113 150 224 38 1/2"

19,5 14,5 34 32 150 1/2"24,5 16 34 32 150 1/2"

(mm)

(mm)

(mm)

(mm)

(mm) (mm)

(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)




18 Tel. +90 322 999 10 00 Pilsa


DN

20253240506375

3040094304009530400963070085307008630700873070088

1201208048281512

Box

5554211

BagSap Code

Chrome Valve

Valve Round Cap

DN

DN

202532

202532

307215930401023040103

307216530527483052749

Sap Code

Sap Code

606050

Box

606050

Box

111

Bag

111

Bag

Valve

DN

20253240

3078894307889730789203040292

70704230

Box

5533

BagSap Code

20253240506375

3040094304009530400963070085307008630700873070088

1201208048281512

5554211

Ball Valve

20x1/2

Bide Nozzle Part Female

DN

3051266

Sap Code

60

Box

10

Bag

27 28,5 90 32 136 1/2"

d1

D1

D1

A1

D

A2

A

A3

L

L G

G

14,5

L1(min)

L1(min)

L1(min) A k L

19,5 14,5 28 38 26 72 1/2"24,5 16 33 42 30 77 3/4"31,5 18 42,5 53 39 80 1"39,4 20,5 54 64 43 111 1-1/4"

19,5 14,5 28,5 26,5 72 3/4"24,5 16 33,5 30 77 3/4"31,5 18 42,5 39 80 1"

d1

d1 D1 A L G

D1 A L GL1(min)

L1(min)

19,5 14,5 28,5 26,5 72 3/4"24,5 16 33,5 30 77 374"31,5 18 43 38,5 80,5 1"

39,4 20,5 71 119 8949,4 23,5 78 119 1262,5 27,5 90 157 12874,7 30 100 157 148

19,5 14,5 50 56 6824,5 16 50 56 6831,5 18 54 56 75

d(mm)

19,5

d1 (mm)

(mm)

(mm)

(mm)



(mm) (mm) (mm)



Pipes and fittings

Pilsa



Metal Female Threaded Union (Hexagonal Shaped)

DN Box d

d

Bag L1(min.)

L1(min.)

G

G

Sap Code

20x1/2”25x3/4”32x1”40x1 1/4” - PN1050x1 1/2” - PN1063x2”

304021730402183040220304022130402223040223

1208060242418

10105222

Metal Male Threaded Union (Hexagonal Shaped)

DN

20x1/2”25x3/4”32x1”40x1 1/4” - PN1050x1 1/2” - PN1063x2”

304022430402253040227304022830402293040230

Sap Code

1208050242016

Box

10105222

Bag

Decorative Valve

DN

202532

307216230512543051255

Sap Code

606050

Box

11 1

Bag

Radiator Valve Straight

Sap CodeDN

20 4047847 80

Box

5

Bag

Radiator Valve Elbow

DN

20 4047846 80

Box

5

BagSap Code

19,5 14,5 1/2''24,5 16 3/4''31,5 18 3/4''39,4 20,5 1-1/4''49,4 23,5 1-1/2''62,5 27,5 2''

19,5 14,5 1/2''24,5 16 3/4''31,5 18 3/4''31,5 18 1''39,4 20,5 1-1/4''49,4 23,5 1-1/2''62,5 27,5 2''

19,5 14,5 28,5 26,5 72 3/4"24,5 16 33,5 30 77 3/4"31,5 18 42,5 39 80 1"

d1

d1

d1

D1

D

D A1

L2

L2

L3

L3

G

G

A L GL1(min)

L1(min)

L1(min)

19,5 14,5 30 66 68 3/4"

19,5 14,5 30 34,5 60 85 3/4"

(mm)

(mm)

(mm)

(mm)

(mm) (mm) (mm)(mm) (mm) (mm)

(mm) (mm) (mm) (mm)(mm)


(mm) (mm)

(mm) (mm)

20 Tel. +90 322 999 10 00 Pilsa


Pipes and fittings

Male Filter

DN

30512033051204

200120

Box

20 10

Bag

20x1/225x3/4

Sap Codes

Welding Machine Set

DN

16-4050-110

30332363040363

51

Sap Code Box

Shifting Union with Metal Transition

DN

20x1/220x3/425x1/225x3/425x1

40478254047826404782740478284065369

Sap Code

300250250250200

Box

3025252520

Bag

Welding Head

DN

2025324050637590110125

3033427303342830334293033430303343130334323033433303343430334353033436

50505050503030302010

Sap Code Box

Cutter

DN

30330424047816

Sap Code

3020

Box

20-25-3240-63

Shifting Elbow with Metal Transition

DN

20x1/225x3/4

30400073040009

Sap Code

300250

Box d1

(mm)

(mm)

d1

(mm)d1

L1(min)(mm)

L1 (min)(mm)

L1 (min)(mm)

D1(mm)

L(mm)

G(mm)

D1(mm)

D(mm)

D2(mm)

L(mm)

G(mm)

A1(mm)

A2(mm)

G(mm)

3025

Bag

19,5 14,5 28,5 30 45 1/2" 24,5 16 33,5 33 53 3/4"

19,5 14,5 28,5 57 1/2''19,5 14,5 29 59 3/4''24,5 16 33,5 59 1/2"24,5 16 33 59 3/4"24,5 16 42,5 72 1"

19,5 14,5 30 41 80 1/2"24,5 16 35 46 101,5 3/4"

Pilsa



CONNECT TO BETTERPE-RT Pipe with Oxygen Barrier

the most flexible heating system

The term PE-RT pipe is short for heat-resistant PE pipe. (PE Raised Temperature)

Wavin uses new generation Type 2 PE-RT with raised pressure strength as a raw material in its manufacturing.

The raw PE-RT ensures long-term hydrostatic strength at high temperatures without any of the crosslinking observed in Pex pipes.

As it does not contain any chemical additive resulting in crosslinking, it is suitable for use with potable water and does not pose any threat to human health.

Packaged in a coil Wavin PE-RT pipes have a very flexible structure and can be installed relatively easily.

EVOH Layer: Special layerpreventing the permeability of oxygen

Internal layer: PE-RT layer resistant to high temperature and pressure

1

2

Thanks to their special formulated layer, Wavin Oxy PE-RT pipes protect metal components installed in the system such as pumps, valves and radiators against corrosion by preventing the permeability of oxygen at a level close to 100%. Thus, the life of the system components is extended, while repair and maintenance costs are minimized.

19,5 14,5 28,5 30 45 1/2" 24,5 16 33,5 33 53 3/4"

22 Tel. +90 322 999 10 00 Pilsa


Our Certificates

Pilsa



Notes

Water management | Heating and cooling | Water and gas distributionWaste water drainage | Datacom

Wavin TR Plastik Sanayi A.Ş. | Güzelevler Mah.Girne Bulvarı No: 294/A Yüreğir / Adana | Web www.wavin.com.tr | E-mail [email protected]

Wavin operates a programme of continuous product development, and therefore reserves the right to modify or amend the specification of their products without notice. All information in this publication is given in good faith, and believed to be correct at the time of going to press. However, no responsibility can be accepted for any errors, omissions or incorrect assumptions. Users should satisfy themselves that products are suitable for the purpose and application intended.

© 2016 WavinWavin reserves the right to make alterations without prior notice. Due to continuous product development, changes in technical spefications may change. Installation must comply with the installation instructions.

Pilsa

product guide pp-r and pp-rct pipe systemsppr & pprct pipes pex and pert pipes - covered pex and...

Documents