Download - ifmnovation newsbook 2017 (EN)
ifmnovation
Product innovations automation technology
NEWSBOOK 2017
3
TOP
TOP
TOP
TOP
TOP
Inductive sensors
Encoders
Position sensors
Robust full-metal sensors for use in harsh environmentsKplus sensors: one sensing range for all metalsElectromagnetic field immune Kplus sensors for welding applicationsInductive sensors take a leap forward
(04.2017)
(04.2017)
(04.2017)
(11.2016)
Photoelectric sensors
New versions of the amazing tiny O8 photocell (04.2017)
Ingeniously simple: display guide for the perfect setting
Capacitive sensors
(11.2016)
Small target, big range – better solutions with magnetic sensors
Magnetic sensors
(04.2017)
Ultrasonic sensors
Precise object detection under extreme conditionsObject detection for long ranges and difficult surfaces
(04.2017)
(04.2017)
Intelligent incremental encoder with display and IO-LinkProgrammable incremental encoder with IO-Link
(04.2017)
(04.2017)
Sensors for motion control
Robust speed sensors – also with ATEX approvalRobust speed sensors – for the first time with ATEX approval and IO-Link
Speed sensors
(04.2017)
(04.2017)
Very robust position sensors with 1 mm-thick metal face
Cylinder sensors
(04.2016)
Multifunctional analogue displayMultifunctional display: speed, time, counterDecentralised display, preprocessing and conversion of analogue signals
Pulse evaluation systems
(04.2017)
(04.2017)
(11.2016)
Laser sensors / distance sensors
O1D with PMD technology – ready for Industry 4.0The next step in photoelectric sensing with distance displayThe next step in photoelectric sensing with easy setting
(04.2017)
(11.2016)
(11.2016)
Feedback systems for valves and valve actuators
New target pucks for position feedback on quarter-turn actuatorsValve feedback sensor with easy wiringFeedback for hand valves
(04.2017)
(11.2016)
(11.2016)
6 - 7 8 - 9 10 - 11 12 - 13
14 - 15
16 - 17
24 - 27
20 - 21 22 - 23
40 - 41 42 - 43
44 - 45 46 - 47
18 - 19
48 - 49 50 - 51 52 - 53
28 - 29 30 - 31 32 - 33
34 - 35 36 - 37 38 - 39
4
TOP
TOP
TOP
TOP
TOPTOP
TOP
TOP
TOP
Pressure sensors
Process sensors
PV pressure sensor – one sensor, two solutionsPressure transmitters with DEUTSCH, AMP or M12 connector for mobile applicationsNew PT absolute pressure transmitter with different measuring rangesIO-Link display: process values at a glance
(04.2017)
(04.2016)
(04.2016)
(04.2017)
Calorimetric flow meter for liquids and gases
Flow sensors / flow meters
(04.2017)
Temperature sensors
Two temperature sensors in oneTemperature sensor with easy dial settingTN sensor with integrated process connection and evaluation electronics
(11.2016)
(11.2016)
(04.2016)
Industrial communication
SafeLine SmartPLC: fail-safe automation systemAS-i Safety at Work module with two safe inputs at one address
AS-Interface Safety at Work
(11.2016)
(04.2017)
AS-Interface controllers / gateways
DataLine SmartPLC: flexible automation system (04.2017)
Maintenance-free level detection where other systems fail
Level sensors
(04.2017)
Industrial imaging
Photoelectric 3D level measurement and point level detection
3D sensors
(11.2016)
Camera systems for mobile machines
Augmented reality: mobile 3D smart camera with overlay functionMobile 3D camera – 2D and 3D in one unitTrue 3D vision sensor with intelligent functionsMultiViewBox: display up to 4 camera images on one screen
(04.2017)
(04.2017)
(11.2016)
(11.2016)
IO-Link master: connection for intelligent sensorsIO-Link master for intelligent sensors in hygienic areasIO-Link master with extra power
IO-Link master
(04.2017)
(04.2017)
(04.2017)
IO-Link
IO-Link device: actuator switching via IO-Link (04.2017)
IO-Link devices
LR DEVICE Parameter setting software via IO-Link master (11.2016)
IO-Link-Software
64 - 65 66 - 67 68 - 69 70 - 71
72 - 73
76 - 77 78 - 79 80 - 81
84 - 85 86 - 87
82 - 83
74 - 75
62 - 63
54 - 55 56 - 57 58 - 59 60 - 61
88 - 89 90 - 91 92 - 93
94 - 95
96 - 97
5
TOP
TOP
TOP
TOP
TOP
TOP
Identification systems
RFID with CANopen or J1939 interface for mobile machines
RFID 13.56 MHz
(04.2016)
Controllers
ecomatController V3 – standard and safety controller in one unit (04.2017)
Systems for mobile machines
I /O modules
ioControl – rugged I/O module with integrated controller (04.2017)
Diagnostic and service units
Real-time clock with CAN interfaceCANwireless: wifi and Bluetooth for the CAN bus
(11.2016)
(11.2016)
Industrial applications / factory automation
Always a reliable connection. ecolink M12 – even for special applicationsecolink M12 cables reduce voltage dropCompact low-profile M8 splitters with secure ecolink connection
(11.2016)
(11.2016)
(11.2016)
Connection technology
24 V DC power supplies
Powerful switched-mode power supply with an enormous power reserve (04.2016)
Power supplies
Use in wet areas and in the food and beverage industry
ecolink M12 – the secure connection even in difficult applicationsecolink M12 cable with 1 mm2 for reduced voltage dropecolink M12 Ethernet D-Code for hygienic and wet areasecolink M12 – T splitters for difficult applications
(04.2017)
(04.2017)
(04.2017)
(11.2016)
Electronic 24 V DC circuit breakers
Circuit protection with monitoring function for the 24 V secondary circuit (04.2016)
98 - 99
100 - 101
102 - 103
104 - 105 106 - 107
108 - 109 110 - 111 112 - 113
122 - 123
114 - 115 116 - 117 118 - 119 120 - 121
124 - 125
6
Position sensors
Robust full-metalsensors for use inharsh environments
Inductive sensors
Short: ideal for tight spaces
Flexible: temperature rangefrom -40...85 °C
Sealed: protection ratings IP 65 to IP 69K
Quality: high-grade stainless forfood processes
Solid: shock and vibration resistant
High reliability even under extreme conditionsFull-metal sensors are used wherever an application presents particularchallenges to the mechanical design. In the food industry, for example, notonly rapid changes of temperature but also aggressive media used for dailycleaning stress the housing material. The same applies to applications inmachine tools and plants where the sensors are permanently exposed tocoolants and lubricants. In the steel industry or in automotive industry, however, weld spatter is not only a strain on the sensing face but also onthe threaded sleeve. In this context the full-metal design with non-stickcoating and the robust sensing face are the ideal solution to ensure a safeoperation. Moreover, the robust stainless steel design offers optimum protectionagainst abrasive parts in metal-cutting machining. Additionally, the compact and short design permits use even in the smallest of spaces.
7
(04.2017)
Sensing range
[mm]
Ambienttemperature
[°C]
Orderno.
M12 connector · output function NO · 3-wire DC PNP · welding area · anti-spatter
Type Total length
[mm]
Operating voltage [V DC] 10...30
Current consumption [mA] < 10
Installation flush
Reverse polarity protection •
Short-circuit protection •
Overload protection •
Protection class III
Housing materials High-grade stainless steel (316L)
Switching status indication [LED] yellow (4 x 90°)
Further technical data
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
For further technical details please visit: www.ifm.com
Dimensions
M12 connector · output function NO · 3-wire DC PNP · coolant and oil lubricant
45 4 -40...85 IFC275M12
M18 45 8 -40...85 IGC258
f
[Hz]
100
Protection rating
IP 65, IP 66, IP 67, IP 68, IP 69K
100 IP 65, IP 66, IP 67, IP 68, IP 69K
M30 50 15 -40...85 IIC233100 IP 65, IP 66, IP 67, IP 68, IP 69K
45 4 -40...85 IFR207M12
M18 45 8 -40...85 IGR207
100 IP 65, IP 66, IP 67, IP 68, IP 69K
100 IP 65, IP 66, IP 67, IP 68, IP 69K
M30 50 15 -40...85 IIR207100 IP 65, IP 66, IP 67, IP 68, IP 69K
M12 connector · output function NO · 3-wire DC PNP · hygienic and wet areas
45 4 0...100 IFT257M12
M18 45 8 0...100 IGT258
100 IP 65, IP 66, IP 67, IP 68, IP 69K
100 IP 65, IP 66, IP 67, IP 68, IP 69K
M30 50 15 0...100 IIT243100 IP 65, IP 66, IP 67, IP 68, IP 69K
Socket, M12,2 m grey, PUR cable EVW001
Socket, M12,5 m grey, PUR cable EVW002
Socket, M12, 4-pole2 m orange, PVC cable EVT064
Socket, M12, 4-pole5 m orange, PVC cable EVT001
Type Description Orderno.
Accessories
Angle bracket for type M30,stainless steel E10737
Angle bracket for type M12,stainless steel E10735
Angle bracket for type M18,stainless steel E10736
L+
L
1
4
3
Wiring diagram
3430
M12
x1
4
M12
x1
45
LED 4 x 90°17
IFC, IFR, IFT
M18
x1
M12
x1
30
4534
4LED 4 x 90° 24
IGC, IGR, IGT
M30
x1,5
3935
50
M12
x1
LED 4 x 90° 536
IIC, IIR, IIT
8
Inductive sensors
Kplus sensors: one sensing rangefor all metals
Uniform sensing range for thereliable detection of all metals
Compact dimensions for use inthe smallest of space
Electromagnetic field immunesensor technology to preventincorrect switching
High-quality stainless steel housing
High reliability thanks to protection rating from IP 65 / IP 69K
Constant correction factorKplus sensors have the same sensing range for all types of metals. They are for example perfectly suited for the detection of aluminium, where conventional sensors show a considerably reduced sensing range. The high switching frequencies enable the monitoring of fast changingswitching states.The resistant stainless steel sleeve allows reliable use in oil and coolant applications. The wide temperature range as well as the high protection ratings enable universal use of the new Kplus sensors.
Position sensors
9
(04.2017)
Sensing range
[mm]
Current rating
[mA]
Switching frequency
[Hz]
Orderno.
M12 connector · 3 wire DC PNP · Output function normally open
InstallationType Total length
[mm]
Further technical dataConnection technology
Type Description Orderno.
45 4 1002000 IFS297M12
M12
M12
M12
M18
M18
45 8 1002000 IFS298
45 10 1002000 IFS299
60 4 1002000 IFS304
M12
M12
60 8 1002000 IFS305
60 10 1002000 IFS306
45 8 1002000 IGS287
45 12 1002000 IGS288
M18
M18
45 15 1002000 IGS289
60 8 1002000 IGS290
M18
M18
60 12 1002000 IGS291
60 15 1002000 IGS292
M30
M30
45 15 1002000 IIS281
60 15 1002000 IIS282
M30 60 22 1002000 IIS283
M30 60 30 1002000 IIS284
flush
non-flush
non-flush
flush
non-flush
non-flush
flush
non-flush
non-flush
flush
non-flush
non-flush
flush
flush
non-flush
non-flush
Operating voltage [V DC] 10...30
Reverse polarity protection •
Short-circuit protection •
Overload protection •
Protection rating IP 65 / IP 66 / IP 67 / IP 68 / IP 69K
Protection class III
Ambient temperature [°C] -40...85
Output status indication [LED] yellow (4 x 90°)
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
For further technical details please visit: www.ifm.com
Housing materials
High-grade stainless steel(316L)
sensing face LCP
Dimensions
Example IES201
417LED 4 x 90°
3549
60
M12
x1
M12
x1
10
Example IFS306
M18
x1
30 15
M12
x1
60
LED 4 x 90°
49
244
Example IGS292
4549
60
22,5
M30
x1,5
M12
x1
LED 4 x 90° 5 36
Example IIS284
Socket, M8, 3 poles2 m black, PUR cable EVC141
Socket, M8, 3 poles5 m black, PUR cable EVC142
M8 connector · 3 wire DC PNP · Output function normally open
40 3 1002000 IES200M8
M8 40 6 1002000 IES201
flush
non-flush
4
13
20,3 8
40
M8x
1
LED 4 x 90°
M8x
1
32,7
10
Positions sensors
Electromagnetic field immune Kplus sensors forwelding applicationsInductive Sensors
Uniform sensing range for thereliable detection of all metals
Robust design with non-stickcoating
Electromagnetic field immunesensor technology to preventincorrect switching
Wide temperature range foruniversal use
High protection ratings up to IP 68 / IP 69K
Use in harsh welding applicationsThe inductive Kplus sensors withstand harsh operating conditions and reliablydetect metal objects even in case of soiling.The sensor housing and the fixing nuts have a non-stick coating to preventsticking of weld slag. Strong magnetic fields occur in welding processes. The new sensor technology prevents incorrect switching.The quick connection with the connector and matching cable from the ecolink range is the ideal basis for permanent use.
11
(04.2017)
Dimensions
Sensing range
[mm]
Currentload[mA]
Switching frequency
[Hz]
Orderno.
M12 connector · 3 wire DC PNP · Output function normally open · brass anti-spatter
65 4 1002000 IFW204M12
M18
M30
65 8 1002000 IGW202
65 15 1002000 IIW202
Installation
flush
flush
flush
Type Total length
[mm]
Operating voltage [V DC] 10...30
Current consumption [mA] < 20
Reverse polarity protection •
Short-circuit protection •
Overload protection •
Protection IP 65 / IP 66 / IP 67 / IP 68 / IP 69K
Protection class II
Ambient temperature [°C] -40...85
Housing materialssensing face LCP
Switching status indication [LED] yellow (4 x 90°)
Further technical data
Connection technology
Type Description Orderno.
Socket, M12,2 m grey, PUR cable EVW001
Socket, M12,5 m grey, PUR cable EVW002
Socket, M12,2 m grey, PUR cable EVW004
Socket, M12,5 m grey, PUR cable EVW005
For further technical details please visit: www.ifm.com
Accessories
Type Description Orderno.
M12 mounting sleeve with end stop, anti-spatter E12452
M18 mounting sleeve with end stop, anti-spatter E12453
M30 mounting sleeve with end stop, anti-spatter E12454
M12 washers, anti-spatter E12412
M18 washers, anti-spatter E12413
M30 washers, anti-spatter E12414
M8 connector · 3 wire DC PNP · Output function normally open · stainless steel (316L) anti-spatter
40 3 1002000 IEW200M8
M8 40 6 1002000 IEW201
flush
non flush
655450
M12
x1
M12
x1
174
LED 4 x 90°
IFW204
4
13
20,3 8
40
M8x
1
LED 4 x 90°
M8x
1
32,7IEW501
4
13
28,3
40
M8x
1
LED 4 x 90°
M8x
1
32,7IEW500
65
50
244
54
LED 4 x 90°
M18
x1
M12
x1
IGW202
65
5054
M12
x1
36
M30
x1,5
5LED 4 x 90°
IIW202
12
Position sensors
Inductive sensorstake a leap forward
Inductive sensors
Precise position monitoring
Digital transmission of targetdistance
High linearity and repeatability
High IP 69K and wide temperature range
Function and polarity selectablevia IO-Link
Much more than just a pulse pick-up!ifm’s new inductive sensors with IO-Link incorporate several functions inone unit. They can be used as switching sensors with an adjustable switchpoint or measuring systems with a measured value transmitted via IO-Link.The output signal can be set to NC or NO and PNP or NPN allowing manypossible combinations. This keeps the number of different types down, reducing the cost of stock.
Highest precisionThe new sensors are so precise that they detect even minute changes. Eventhe true run of a spindle or the tension of a saw blade is reliably detected.An alarm can be set if the target leaves the detection zone or comes tooclose to the sensing face. All data acquired can be transmitted via IO-Linkand recorded. This new development is unbeatable.
13
(11.2016)
Detectionzone[mm]
Housingmaterial
f
[Hz]
Orderno.
M12 connector· 3-wire DC
InstallationType Dimensions
[mm]
Operating voltage [V DC] 10...30
Electrical design DC PNP / NPN can be setvia IO-Link
Output functionNormally open / normally closed
can be set via IO-Link
Current rating [mA] 100
Reverse polarity protection •
Short-circuit protection •
Protection class III
Switching status indication [LED] yellow
IO-Link
V1.1; COM2; 3 ms cycle time;
smart sensor profiles; single point mode; two point mode; window mode
Further technical data
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
For further technical details please visit: www.ifm.com
60 0.375...3.75 coated brass600 IF6123M12
M12
M18
M18
Rectangular
Rectangular
60 0.7...7 coated brass600 IF6124
60 0.75...7.5 coated brass300 IG6615
60 1.3...13
flush
non flush
flush
non flush
coated brass300 IG6616
M30
M30
65 1.3...13 coated brass100 II5973
65 2.3...23
flush
non flush
coated brass100 II5974
40 x 40 2.1...21 PA100 IM5172
40 x 40 2.6...26 PA100 IM5173
flush
non flush
Ambient temperature
[°C]
-40...85
-40...85
-40...85
-40...85
-40...85
-40...85
-25...80
-25...80
Protection rating
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 67
IP 67
Dimensions
Example IF6124
Example IG6616
Example II5974
Type Description Orderno.
Accessories
Angle bracket for type M30,stainless steel E10737
Mounting clamp, with end stop for types M12, PC E11994
Mounting clamp, with end stop for types M18, PC E11995
Mounting clamp, with end stop for types M30, PC E11996
Angle bracket for type M12,stainless steel E10735
Angle bracket for type M18,stainless steel E10736
4940
M12
x1
174
M12
x1
60
LED 4 x 90°
5
M18
x1
35 10
M12
x1
60
LED 4 x 90°
49
244
53
34
M30
x1,5
5
52
65
M12
x1
LED 4 x 90°
15
36
14
Position sensors
Ingeniously simple: display guide for the perfect setting
Capacitive sensors
Unique visualisation and handling concept via LED display
See and compensate switchpoint movement
IP 69K gives high ingress resistance
PNP/ NPN, NO/ NC, timerfunction
For medium temperatures up to 110 °C
Visualised switch pointThe new capacitive sensors stand out not only because of their excellenttechnical data but most of all with their new and unique visualisation concept. Using a 12-LED bar display of the PerformanceLine the user canalways adapt the switch point to suit the application conditions – it is always in the centre of the display. The green LEDs either side of the switchpoint indicate the reliability of the switch point. Deposits, material changesetc. are displayed directly on the sensor and the user can readjust theswitch point precisely as needed. An imminent error can be detected ingood time and avoided thus minimising the risk of failures or deactivation.If help is needed with the effects of process changes this is much easier to explain and rectify with the LED display. Over the phone the user candescribe the LED behaviour and a support engineer can easily advise corrective measures.
15
(11.2016)
Further technical data
PerfomanceLine · M12 connector ·3 wires
StandardLine · connection cable 2 m PUR· 3 wires
Type Description Orderno.
Mounting accessories
Type Description Orderno.
Operating voltage [V DC] 10...30
Short-circuit protection •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...80
Mounting clamp with end stop for M18 types E11048
Mounting clamp with end stop for M30 types E11049
Fixing clamp with reducing bush for M18 types E10076
Fixing clamp with reducing bush for M30 types E10077
Mounting adapter for M30 types,G 1 1/1", POM E11033
Mounting adapter for M30 types,G 1 1/4", PVDF
Switching frequency [HZ] 40
Medium temperature [°C] -25...110
Housing material PBT
Type Output stage Sensing range
[mm]
Protection rating/protection class
Orderno.
Setting range
[mm]
Communicationinterface
For further technical details please visit: www.ifm.com
Memory plug, parameter memoryfor IO-Link sensors E30398
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors
QA0011
IO-Link master with Profinet interface AL1100
IO-Link master with EtherNet/IP interface AL1020
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 kBits/s)
E30390
M30 PNP, NO/NC 25 nf IP 65, IP 67, IP 69K / III KI60000.5...40
M30 NPN, NO 25 nf IP 65, IP 67, IP 69K / III KI5300
M30 PNP, NC 25 nf IP 65, IP 67, IP 69K / III KI5301
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 NPN, NC 25 nf IP 65, IP 67, IP 69K / III KI5302
M30 PNP, NO 25 nf IP 65, IP 67, IP 69K / III KI5303
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 PNP, NC 15 qf IP 65, IP 67, IP 69K / III KI5304
M30 PNP, NO 15 qf IP 65, IP 67, IP 69K / III KI5305
0.5...24
0.5...24
IO-Link COM 2
IO-Link COM 2
M30 NPN, NO 25 nf IP 65, IP 67, IP 69K / III KI5306
M30 PNP, NC 25 nf IP 65, IP 67, IP 69K / III KI5307
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 NPN, NO 25 nf IP 65, IP 67, IP 69K / III KI5308
M30 PNP, NO 25 nf IP 65, IP 67, IP 69K / III KI5309
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 PNP, NC 15 qf IP 65, IP 67, IP 69K / III KI5310
M30 PNP, NO 15 qf IP 65, IP 67, IP 69K / III KI5311
0.5...24
0.5...24
IO-Link COM 2
IO-Link COM 2
M18 NPN, NO 15 nf IP 65, IP 67, IP 69K / III KG5306
M18 PNP, NC 15 nf IP 65, IP 67, IP 69K / III KG5307
0.5...30
0.5...30
IO-Link COM 2
IO-Link COM 2
M18 NPN, NO 15 nf IP 65, IP 67, IP 69K / III KG5308
M18 PNP, NO 15 nf IP 65, IP 67, IP 69K / III KG5309
0.5...30
0.5...30
IO-Link COM 2
IO-Link COM 2
M18 PNP, NC 8 qf IP 65, IP 67, IP 69K / III KG5310
M18 PNP, NO 8 qf IP 65, IP 67, IP 69K / III KG5311
0.5...9
0.5...9
IO-Link COM 2
IO-Link COM 2
IO-Link COM 2
M18 PNP, NO/NC 15 nf IP 65, IP 67, IP 69K / III KG60000.5...30 IO-Link COM 2
Mounting adapter for M18 types,G 3/4", POM E43900
Mounting adapter for M18 types,G 1", PVDF E43904
IO-Link accessories
StandardLine · M12 connector ·3 wires
16
Position sensors
Small target, big range – bettersolutions with magnetic sensorsAccessories for magnetic sensors
Easy fit with thread or countersink
Simplified mounting
Compact targets with long sensing ranges up to 55 mm
Increased process safety – conceal behind stainless steelfor zero visibility
Stable signals even under vibration
Easy solutions for difficult applicationsIn special applications, the ifm magnetic sensors with these new targetsoffer long sensing ranges where other technologies reach their limits. Inchallenging applications, the combination of magnetic sensor and targetcan maximise performance.
Restricted spaceNew magnets with a small design offer easier mounting options in a machine, even where space is restricted, due to countersinks or a thread.Due to the new targets it is possible to double the M12 sensors’ rangewhile an enlargement of clear space between sensor and magnet providesa more flexible installation as well as an increased process safety.
17
(04.2017)
For further technical details please visit: www.ifm.com
Connection technology
Type Description Orderno.
Socket, M8, 3-pole,5 m orange, PVC cable EVT123
Socket, M8, 3-pole,10 m orange, PVC cable EVT124
Designation Externaldiameter[Ø mm]
Drill holediameter[Ø mm]
Material Ta
[°C]
Orderno.
Ring magnet
M3.2 133.5 Barium ferrite -40...200 E12537
M6.0 123.5 Neodymium -40...80 E12538
M6.1 245.5 Neodymium -40...80 E12539
M7.0 Width across flats 10, hexagonal nut– Neodymium,
tin-plated -40...80 E12540
M7.1 12– Neodymium, plastics
Sn at MFS211
[mm]
24
21
55
15
31 -40...60 E12541
Accessories
Type Description Orderno.
Angle bracket for type M12, stainless steel E10735
Angle bracket for type M18, stainless steel E10736
Mounting clamp, with end stop for types M12 E11047
Mounting clamp, with end stop for types M18 E11048
Threaded magnet
Socket, M12, 4-pole,2 m black, PUR cable EVC001
Socket, M12, 4-pole,5 m black, PUR cable EVC002
Sensors in combination with a magnet
MGS20... 25 28 55 20 38
MS50... 20 25 50 15 31
MFS2... 20 25 50 15 31
Type Sensing range [mm]
M3.2 M6.0 M6.1 M7.0 M7.1
Further magnets
Type Description Orderno.
Damping element M3.0,Ø 20 mm, barium ferrite E10751
Damping element M5.0, Ø 35 mm, barium ferrite E10753
Sensors
Type Description Orderno.
Magnetic sensor, stainless steel M12 x 60 mm / NC MFS210
Magnetic sensor, stainless steel M12 x 60 mm / NO MFS211
Magnetic sensor, plastics 28 x 10 x 16 / NO MS5010
Magnetic sensor, plastics 28 x 10 x 16 / NO MS5011
Magnetic sensor, stainless steel M18 x 60 mm / NO MGS204
Magnetic sensor, stainless steel M18 x 60 mm / NC MGS206
Damping element M4.1, Ø 40 mm, barium ferrite / stainless steel(1.4571 / 316Ti)
E11803
Damping element M3.1, Ø 20 mm, barium ferrite / stainless steel(1.4571 / 316Ti)
E12291
18
Position sensors
Very robust position sensorswith 1 mm-thickmetal faceCylinder sensors
Extremely pressure resistantwith over 10 million pressurecycles
Best value performer
Complementary outputprovides higher operationalreliability
Standard M12 housing with ingress-resistant cable entry
Short housing (40 mm) forextremely low-profile cylinders
Function principleThe new MFH series sensor is suited for flush mounting in various steels.With its 1.8 mm sensing range it shows reliable switching characteristics.The new operating principle of this unit is based on a magnetic-inductivetechnology that detects only ferromagnetic metals (e.g. steel). It is sealedby means of an O-ring and a supporting ring towards the pressure area.
Applications Besides use in hydraulic cylinders, the sensor is also ideal for other hydrauliccomponents such as valves or pumps. MFH operates reliably for the lifetimeof the cylinder. Furthermore, it is used in mechanical engineering processes,e.g. in plastic injection-moulding or process industry applications.Its attractive price means the sensor can also be considered for simplecomponents where this option used to be too expensive.
19
For further technical details please visit: www.ifm.com
M12
x1
101824,8
417
M12
x19,
7
7,8
60
Connection technology
Type Description Orderno.
M12 socket,2 m black, PUR cable, LED EVC644
Y splitter, ”OR“M12 connector / 2x M12 socket EBC117
Y splitter, ”AND“,M12 connector / 2x M12 socket EBC118
Type Sensingrange[mm]
Housinglength[mm]
LED OutputAmbienttemperature
[°C]
Orderno.
Cable connection
M12 1.8 f40 • PNP, NO-25...85 MFH205
M12 1.8 f40 • NPN NO-25...85 MFH206
M12 1.8 f40 • PNP, NC-25...85 MFH207
M12 1.8 f40 • PNP, NO/NC-25...85 MFH208
M12 1.8 f60 – PNP, NO/NC-25...120 MFH209
Operating voltage [V] 10...36 DC
Current rating [mA] 200
Switching frequency [Hz] 1000
Short-circuit protection, pulsed •
Protected against reverse polarity / overload protected • / •
Operating pressure [bar] 500
Pressure rating , static [bar] 1000
Burst pressure [bar] 2000
Protection rating, protection class
IP 65 / IP 68 / IP 69K,III
Housing material stainless steel 1.4404
Common technical data
Accessories
Type Description Orderno.
Optical particle monitor LDP100
Seal process connection,set 5 O-rings + 5 supporting rings E12451
Switched-mode power supply 24 V DC / 5 A, metal housing DN4012
Dimensions
Example MFH205
MFH209
Wiring
M12 connector, complementary
M12 socket,2 m black, PUR cable EVC001
MFH205 MFH209
101820
417
M12
x19,
7
7,8
40
BN
BK
BU
L+
L4
L
L+1
2
32:4:
(04.2016)
20
Position sensors
Precise object detectionunder extreme conditionsUltrasonic sensors
Robust high-grade stainlesssteel housing for demandingapplications
Sensing range up to 1.2 m inM18 cube design and 2.2 m in M18 design
The vibrating sound transducerreduces the deposit of dirt
Retro-reflective operation fororientation-independent objectdetection
Easy setting via teach button,wire teach or IO-Link
The alternative for difficult surfacesUltrasonic sensors transmit and receive sound waves in the ultrasonicrange. The object to be detected reflects the sound waves and the distanceinformation is determined via time of flight measurement. As opposed tophotoelectric sensors, colour, transparency or the object’s surface shine donot play a role. Blister packages in packaging technology or transparentplastic bowls in the food industry, for example, can be reliably detected.
High performanceThe ifm ultrasonic sensors in M18 design provide a particularly small blindzone and long sensing ranges which are usually only achieved by sensors ofa considerably larger design.The sensors operate reliably with heavy soiling so that they can be used inapplications in which photoelectric sensors meet their limits.
21
(04.2017)
For further technical details please visit: www.ifm.com
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
Housing length/dimensions
[mm]
Setting
60
Type
Wire
Orderno.
UGT500
300 mm*
Orderno.
UGT503
800 mm*
Orderno.
UGT506
1200 mm*
Orderno.
–
1600 mm*
* Max. range
Output
PNP
60 Wire UGT501 UGT504 UGT507 –4...20 mA
60 Wire UGT502 UGT505 UGT508 –0...10 V
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
53 x 20 x 38 Pushbutton UGT580
300 mm*
UGT582
800 mm*
UGT584
1200 mm*
–
1600 mm*
PNP + 4…20 mA
53 x 20 x 38 Pushbutton UGT581 UGT583 UGT585 –PNP + 0…10 V
53 x 20 x 38 Pushbutton UGT586 UGT588 UGT590 –NPN + 4…20 mA
53 x 20 x 38 Pushbutton UGT587 UGT589 UGT591 –NPN + 0…10 V
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
98 Pushbutton, IO-Link –
300 mm*
–
800 mm*
–
1200 mm*
UGT509
1600 mm*
2 x PNP
98
98
98
98
98
Pushbutton, IO-Link – – –
– – –
– – –
– – –
– – –
UGT510PNP + 4…20 mA
Pushbutton, IO-Link UGT511PNP + 0…10 V
Pushbutton UGT5152x NPN
Pushbutton UGT516NPN + 4…20 mA
Pushbutton UGT517NPN + 0…10 V
Ultrasonic retro-reflective sensor · 3-wire DC, 3-pole
98
M18
M18
M18
M18 Cube
M18 Cube
M18 Cube
M18 Cube
M18
M18
M18
M18
M18
M18
M18 Pushbutton, IO-Link –
300 mm*
–
800 mm*
–
1200 mm*
UGR500
1600 mm*
Orderno.
–
2200 mm*
–
–
–
2200 mm*
–
–
–
UGT512
2200 mm*
UGT513
UGT514
UGT518
UGT519
UGT520
UGR501
2200 mm*
PNP
Accessories
Type Description Orderno.
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20720
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21206
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20721
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21207
Rod, 100 mm, Ø 12 mm, M10 thread, stainless steel E20938
Rod, 200 mm, Ø 10 mm, M10 thread, stainless steel E20940
Cube for mounting on an aluminiumprofile, M10 thread, diecast zinc E20951
Common technical data
Operating voltage [V DC] 10...30
Temperature compensation •
Operating temperature range [°C] -20...70
Current rating [mA]Switching output 100
Protection IP 67
Echo LED green
Status indications LED yellow
Connection M12 connector
Connection technology
Type Description Orderno.
Socket, M12, 4-pole2 m orange, PVC cable
Socket, M12, 4-pole5 m orange, PVC cable
Socket, M12, 4-pole2 m black, PUR cable
Socket, M12, 4-pole5 m black, PUR cable
Socket, M12, 4-pole2 m black, PUR cable
Socket, M12, 4-pole5 m black, PUR cable
60 Wire UGT521 UGT522 UGT523 –NPNM18 –
98M18 Pushbutton – – – UGR502 UGR503NPN
EVT064
EVT001
EVC001
EVC002
EVC004
EVC005
60 IO-Link UGT524 UGT525 UGT526 –PNPM18 –
22
Position sensors
Object detectionfor long ranges anddifficult surfaces
Ultrasonic sensors
M18 plastic housing available in the two lengths 60 mm and98 mm
Long ranges from 300 mm to2200 mm available
The vibrating sound transducerreduces the deposit of dirt
Digital and analogue output for point level measurement and distance detection
Easy setting via teach button,wire teach or IO-Link
The alternative for difficult surfacesUltrasonic sensors transmit and receive sound waves in the ultrasonicrange. The object to be detected reflects the sound waves and the distanceinformation is determined via time of flight measurement. As opposed tophotoelectric sensors colour, transparency or the object’s surface shine donot play a role. Blister packages in packaging technology or transparentplastic bowls in the food industry, for example, can be reliably detected.
High performanceThe ifm ultrasonic sensors in M18 design provide a particularly small blindzone and long sensing ranges which are usually only achieved by sensors of a considerably larger design.The sensors operate reliably with heavy soiling so that they can be used inapplications in which photoelectric sensors meet their limits.
23
(04.2017)
For further technical details please visit: www.ifm.com
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
Housing length/dimensions
[mm]
Setting
60
Type
Wire
Orderno.
300 mm*
Orderno.
800 mm*
Orderno.
1200 mm*
Orderno.
–
1600 mm*
* Max. range
Output
PNP
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
98 Pushbutton, IO-Link – – –2 x PNP
98
98
Pushbutton, IO-Link – – –
– – –
PNP + 4…20 mA
Pushbutton, IO-Link PNP + 0…10 V
M18
M18
M18
M18
Orderno.
–
2200 mm*
Accessories
Type Description Orderno.
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20720
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21206
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20721
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21207
Rod, 100 mm, Ø 12 mm, M10 thread, stainless steel E20938
Rod, 200 mm, Ø 10 mm, M10 thread, stainless steel E20940
Cube for mounting on an aluminiumprofile, M10 thread, diecast zinc E20951
Common technical data
Operating voltage [V DC] 10...30
Temperature compensation •
Operating temperature range [°C] -20...70
Current rating [mA]Switching output 100
Protection IP 67
Echo LED green
Status indications LED yellow
Connection M12 connector
Connection technology
Type Description Orderno.
Socket, M12, 4-pole2 m black, PUR cable EVC001
Socket, M12, 4-pole5 m black, PUR cable EVC002
Socket, M12, 4-pole2 m black, PUR cable EVC004
Socket, M12, 4-pole5 m black, PUR cable EVC005
L+
L3
4
2
1
Wiring
Example UGT204
UGT200 UGT201 UGT202
UGT203
UGT204
UGT205
UGT206
UGT207
UGT208
60 Wire UGT209 UGT210 UGT211 –NPNM18 –
300 mm* 800 mm* 1200 mm* 1600 mm*
60 IO-Link UGT212 UGT213 UGT214 –PNPM18 –
2200 mm*
24
Position sensors
New versions of the amazing tinyO8 photocell
Photoelectric sensors
Photoelectric miniature sensor with maximum precisionThe new powerful O8 sensor is an optimum choice for applications wherespace is at a premium such as assembly and robotics. It might be small, butthe sensor achieves very long ranges.Moreover the background suppression is extremely reliable and preciseeven for the detection of very small, flat or reflective objects. The O8 reliably copes even with constantly changing backgrounds, e.g. on robot arms.
Reliable and efficient thanks to IO-LinkIO-Link allows simple setting of the ranges and sensitivity, with the rangeadjustable to the nearest millimetre. A complex adjustment of the distancefrom the sensor to the object is not needed. The new sensors are also available with preset ranges. With their reliability and precision they aremuch above the average of conventional devices.
Through-beam range up to 3 m
Precise, colour-independent 80 mm background suppression
Reliable detection of dark orshiny surfaces
IO-Link for easy setting and replacement of sensors – readyfor Industry 4.0
25
Diffuse reflection sensor with background suppression · 3 wires DC PNPIO-Link 1.1 NPN
Common technical data
Operating voltage [V DC] 10...30
Switching frequency [Hz] 1000
Protection rating, protection class
IP 65 / IP 67III
Type of light / wave length red light, 633 mm
OutputH = light-on / D = dark-on mode H
Switching status indication LED yellow
Voltage drop [V] < 2.5
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...60
Materials housing lens
ABS; 1.4404 (316L)PMMA
Current rating [mA] 100
Operation LED green
8,1
8,8
5,5
28,1
14,412,1
133
3,5
3,2
2 x LED
Dimensions
Example O8H200
Rectangular28.1 x 8.1 x
14.4 mm
Range
[mm]
Spot Ø at max. range
[mm]
Type
[H, W, D]
Orderno.
Connection Orderno.
15 4 O8H200 O8H201
15 4 O8H202
2 m, PVC cable
0.3 m PVC cable / M8 connector, 3 poles O8H203
15 4 O8H204 O8H205
30 4 O8H206
0.3 m PVC cable / M8 connector, 4 poles
2 m, PVC-Kabel O8H207
30 4 O8H208 O8H209
30 4 O8H210
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles O8H211
50 4 O8H212 O8H213
50 4 O8H214
2 m, PVC cable
0.3 m PVC cable / M8 connector, 3 poles O8H215
50 4 O8H216 O8H217
80 4.5 O8H218
0.3 m PVC cable / M8 connector, 4 poles
2 m, PVC cable O8H219
80 4.5 O8H220 O8H221
80 4.5 O8H222
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles O8H223
Wiring diagram
3
4
1
M8 connector, 3 poles
L+
L
1
4
3 L
BN
BK
BU
L+
3 wires DC, PNP 3 wires DC, NPN
21
43
M8 connector, 4 poles
26
Common technical data
Operating voltage [V DC] 10...30
Protection rating, protection class
IP 65 / IP 67III
Type of light / wave length red light, 633 mm
Switching frequency [Hz] 1000
Switching status indication LED yellow
Voltage drop [V] < 2.5
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...60
Materials housing lens
ABS; 1.4404 (316L)PMMA
Current rating [mA] 100
Operation LED green
8,1
8,8
5,5
28,1
14,412,1
133
3,5
3,2
2 x LED
Dimensions
Example O8P200
Wiring diagram
3
4
1
M8 connector, 3 poles
L+
L
1
4
3 L
BN
BK
BU
L+
3 wires DC, PNP 3 wires DC, NPN
2
1
4
3
M8 connector, 4 poles
Retro-reflective sensor with polarisation filter · 3-wire DC
Range
[mm]
Spot Ø at max. range*
[mm]
Type
[H, W, D]
Connection
Rectangular28.1 x 8.1 x
14.4 mm
2 m, PVC cable
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles
2 m, PVC cable
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles
2 m, PVC cable
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles
2 m, PVC cable
H = light-on / D = dark-on
mode
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles
O8P200
PNPIO-Link 1.1
O8P201
O8P202 O8P203
O8P204 O8P205
O8T200 O8T201
O8T202 O8T203
O8T204 O8T205
O8S200
O8S201
O8S202
O8E200 O8E201
O8E202 O8E203
O8E204 O8E205
NPN
Orderno.
Orderno.
Diffuse reflection sensor (energetic), 3-wire DC PNPIO-Link 1.1 NPN
Through-beam sensor, transmitter, DC
Through-beam sensor, receiver, 3-wire DC
Rectangular28.1 x 8.1 x
14.4 mm
Rectangular28.1 x 8.1 x
14.4 mm
Rectangular28.1 x 8.1 x
14.4 mm
PNPIO-Link 1.1 NPN
180 20
180 20
180 20
3000 200
3000 200
3000 200
3000 –
3000 –
3000 –
D
D
D
H
H
H
–
–
–
D
D
D
1800** 140
1800** 140
1800** 140
* at maximum range – ** referred to prismatic reflector E20004
27
(04.2017)
For further technical details please visit: www.ifm.com
Socket, M8, 3 poles,2 m orange, PVC cable EVT122
Socket, M8, 3 poles,5 m orange, PVC cable EVT123
Adapter cable for connection betweenUSB IO-Link master E30390 and sensorwith connector M8, 3 poles / M12, 4 poles
EVC215
Memory plug, parameter memoryfor IO-Link sensors E30398
Adapter cable for connection betweenUSB IO-Link master E30390 and sensorwith connector M8, 4 poles / M12, 4 poles
EVC240
IO-Link master with Profinet interface AL1100
IO-Link Accessories
Type Description Orderno.
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 kBits/s)
E30390
Power supplies
Type Description Orderno.
Switched-mode power supply, plastic housing, 24 V DC, 1,3 A DN1030
Switched-mode power supply, plastic housing, 24 V DC, 2,5 A DN1031
Switched-mode power supply, metal housing, 24 V DC, 3,3 A DN4011
Switched-mode power supply, metal housing, 24 V DC, 5 A DN4012
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
Accessories
Type Description Orderno.
Angle bracket for free-standing mounting, quick mounting, stainless steel E21289
Connection technology
Type Description Orderno.
Socket, M8, 4 poles,2 m black, PUR cable EVC150
Socket, M8, 4 poles,5 m black, PUR cable EVC151
Socket, M8, 3 poles,2 m black, PUR cable EVC141
Socket, M8, 3 poles,5 m black, PUR cable EVC142
Socket, M8, 4 poles,2 m orange, PVC cable EVT134
Socket, M8, 4 poles,5 m orange, PVC cable EVT135
Angle bracket for free-standing mounting, stainless steel E21291
Prismatic reflector Ø 42 mm, plastic,sticking to a surface E20004
Prismatic reflector Ø 35 mm, plasticmounting with one screw E20954
Mounting set for prismatic reflectorE20954, M8 thread, diecast zinc E20906
Mounting set for prismatic reflectorE20954, M8 thread, stainless steel E20907
Cube for mounting on an aluminiumprofile, M8 thread, diecast zinc E20950
Mounting rod, 120 mm, Ø 10 mm, M8 thread, stainless steel E21081
28
Position sensors
O1D with PMD technology – readyfor Industry 4.0
Laser sensors / distance sensors
Optical distance detection witha range of up to 10 m
2 switching outputs; one output can be configured asanalogue output
Resistant to extraneous light upto 100,000 lux
Can be used in applications needing background suppression
IO-Link for easy setting and replacement of sensors
PMD distance sensors with IO-LinkThanks to the innovative on-chip time-of-flight principle with PMD tech-nology, this sensor offers all the capability of a measurement system. It nowcomes with IO-Link functionality for simpler parameter setting and distancevalue transmission. The signal strength can now be sent via IO-Link. This makes it possible to distinguish many different components within thesame application by their object contrasts. O1D is insensitive to extraneous light up to 100,000 lux and remains unaffected even if direct sunlight hits the sensor or target, thus operatingreliably and accurately at all times.
29
(04.2017)
For further technical details please visit: www.ifm.com
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Memory plug, parameter memoryfor IO-Link sensors E30398
* one switching output can be configured as analogue output (0...10 V or 4...20 mA)
Distance detection
Electrical design
Backgroundsuppression
[m]
Switchingoutputs
Laserclass
Sampling rate
[Hz]
Spotdiameter
[mm]
Operatingrange
[m]
Orderno.
DC PNP 0...19 2* 2 max. 50, adjustable
15 x 15 (at 10 m) 0.2...10 O1D120
Further technical data
TypeO1D
Operating voltage [V] 18...30 DC
Connection M12 connector
Protection IP 67 / III
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
EMC EN 60947-5-2
Material Housing Front lens LED window
diecast zincglass
polycarbonate
Function displaySwitching status LEDOperation LED
yellowgreen
Distance value,programming
4-digit alphanumericdisplay
52
1 2
30
45
2520
4,5
6
4559
42
M12x1
30
Dimensions
1) 4-digit alphanumeric display2) Programming buttons
Socket, M12,2 m orange, PVC cable EVT064
Socket, M12,5 m orange, PVC cable EVT001
Socket, M12,2 m orange, PVC cable EVT067
Socket, M12,5 m orange, PVC cable EVT004
Accessories
Type Description Orderno.
Mounting set for clamp mounting,Ø 12 mm, stainless steel E2D101
Cube for mounting on an aluminiumprofile, M10 thread, diecast zinc E20951
Protective cover,plastic, PMMA E21133
Protective cover,glass E21171
Cooling and protection box,aluminium E21248
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors andactuators
QA0011
30
Position sensors
The next step in photoelectric sensingwith distance display
Laser sensors / distance sensors
Reliable background suppression even at 2 m
Detects any surface finish or colour
Not fooled by hi-vis
Remote setting via IO-Link adds many options
New improved performance
Time of flight technology as standard sensorThe O5D with time of flight technology (PMD = Photonic Mixer Device)combines the following advantages: long range, reliable background suppression, visible laser light and high excess gain. In the same price rangeas standard sensors, it is a clever alternative.
Easy handlingThe switch point is set easily to the nearest centimetre via ”+/-“ buttonsand display or alternatively via IO-Link, allowing read-out of the actual value.
Any surface and mounting positionPolished, matt, dark or light objects of any colour: the O5D features reliablebackground suppression. The unit allows any angle of incidence and thusflexibility of mounting. This simplifies installation and saves costs.
31
(11.2016)
For further technical details please visit: www.ifm.com
Common technical data
Operating voltage [V DC] 10...30
Current consumption [mA] < 75
Switching frequency [Hz] 11
Dimensions [mm] 56 x 18.2 x 46.5
Type of light visible laser light 650 nm
Extraneous light on the object [klx] max. 10
Switching status indication LED yellow
Operation LED green
Distance value3-digit
alphanumeric display
Protection rating, protection class
IP 65, IP 67III
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...60
Current rating [mA] 2 x 100
Output function OUT1: NOOUT2: NC
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Photoelectric distance sensor · M12 connector, complementary
30...2000 ...20 PNP < 2.5* < 5 O5D101
30...2000 ...20 O5D100PNP < 2.5* < 5 cm
inch
Material housing / connector front pane / LED window bezel control panel
PAPMMA
stainless steelTPU
Accessories
Type Description Orderno.
Mounting bracket for rod,complete set incl. clamp E21083
Protective bracket for rod,complete set incl. clamp E21084
Bracket for free-standing mounting E21087
Cube for mounting on an aluminiumprofile, M10 thread, diecast zinc E20951
Measuringrange[mm]
Backgroundsuppression
[m]
Output Hysteresis
[%]
Spot Ø atmax. range
[mm]
Orderno.
Unit of measurement
Laserprotection class
2
2
Memory plug, parameter memoryfor IO-Link sensors E30398
IO-Link interface, current consumptionfrom USB port E30396
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
* at max. range
Hysteresis (example O5D100)
500 1000 1500 200000
25
50
75
100
125
150
175
200
y
x
1.
2.
30...2000 ...20 O5D102NPN < 2.5* < 5 cm2
30...2000 ...20 O5D150PNP < 4* < 5 cm1
30...2000 ...20 O5D151PNP < 4* < 5 inch1
x: distance in [mm], y: hysteresis in [mm]1. Background black (6 % remission)2. Background white (90 % remission)
32
Position sensors
The next step in photoelectric sensingwith easy setting
Laser sensors / distance sensors
Dial switching distance – done!
Reliable background suppression even at 2 m
Detects any surface finish or colour
Not fooled by hi-vis
IO-Link adds many options
New improved performance
Time of flight technology as standard sensorThe OID with time of flight technology (PMD = Photonic Mixer Device)combines the following advantages: long range, reliable background suppression, visible laser light and high excess gain. In the same price rangeas standard sensors, it is a clever alternative.
Easy handlingThe switch point can be set easily by turning the setting ring (easy turn). A scale shows the distance set. The switch point can thus be set before installation. As an alternative the version without setting ring features thehigh protection rating IP69 K.
Any surface and mounting positionReliable detection of polished, matt, dark or light objects independent of the colour. The unit allows any angle of incidence and thus flexibility ofmounting. This simplifies installation and saves costs.
33
(11.2016)
For further technical details please visit: www.ifm.com
Photoelectric distance sensor · M12 connector, complementary
30...2000 ...20 PNP < 2* IP 65, IP 67
30...2000 ...20 PNP < 2* IP 65, IP 67 cm / inch
cm
Measuringrange[mm]
Backgroundsuppression
[m]
Output Hysteresis
[%]
Protection rating
Orderno.
Unit of measurement
Laserprotection
class
2
2
30...2000 ...20 PNP < 2* IP 65, IP 67, IP 69K cm / inch2
30...2000 ...20 NPN < 2* IP 65, IP 67 cm2
30...2000 ...20 PNP < 4* IP 65, IP 67 cm / inch1
30...2000 ...20 PNP < 4* IP 65, IP 67 cm1
30...2000 ...20 PNP < 4*
•
•
Setting ring
–
•
•
•
– IP 65, IP 67, IP 69K cm / inch1
Current consumption [mA] < 75
Switching frequency [Hz] 11
Common technical data
Operating voltage [V DC] 10...30
Dimensions M30 x 90 mm
Type of light visible laser light 650 nm
Spot Ø at max. [mm]range < 5
Extraneous light on the object [klx] max. 10
Switching status indication LED yellow
Operation LED green
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...60
Current rating [mA] 2 x 100
Output function OUT1: NOOUT2: NC
Material housing
front pane
stainless steel, PBT, PC, FPM
PMMA
Hysteresis (example OID200)
500 1000 1500 200000
25
50
75
100
125
150
175
200
y
x
1.2.
x: distance in [mm], y: hysteresis in [mm]1. Background black (6 % remission)2. Background white (90 % remission)
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Type Description Orderno.
Accessories
Angle bracket for type M30,stainless steel E10737
Mounting clamp for types M30, PTB E10077
Mounting clamp, with end stop for types M30, PC E11049
Memory plug, parameter memoryfor IO-Link sensors E30398
IO-Link interface, current consumptionfrom USB port E30396
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
* at max. range
OID201
OID200
OID204
OID202
OID250
OID251
OID254
34
Position sensors
New target pucksfor position feedback on quarter-turn actuatorsValve feedback systems for rising stemvalves and quarter-turn actuators
Basic version for standard 90°applications
Freely adjustable version for individual solutions
Preassembled targets reduce installation complexity
Visible from a distance thanksto clearly visible position indicators
Compatible with actuators toVDI/VDE 3845
Quick and easy to mount The mounting orientation of the target puck is recognisable from the outside. This allows quick and easy mounting on the shaft end of the actuator without the need for further adjustment. The preassembled damping elements reduce installation complexity. The target pucks are designed forshaft heights of 30 mm or 20 mm in combination with an adapter.
High flexibilityRotatable damping elements allow the pucks to be used in both standardand individual position feedback applications.
35
(04.2017)
Sensors
Type Description Orderno.
Dual sensor, PBT M12 connector IN5327
Dual sensor with actuator interface connection, terminals IN0131
For further technical details please visit: www.ifm.com
Dimensions
Connection technology
Type Description Orderno.
Dual sensor with actuator interface connection, connection terminals, ATEX NN505A
Dual sensor AS-i with actuator interfaceconnection, M12 connector AC2316
Target pucks
Mounting dimensions[X / Y mm]
Orderno.
E12517
E12516
E12517+E12526
E12516+E12526
E17328
E17119
80 / 30
80 / 30
80 / 30
80 / 30
130 / 30
130 / 30
Height of the actuator shaft
[Z mm]
30
30
20
20
30
30
Description
Puck, basic
Puck, adjustable
Puck, basic
Puck, adjustable
Large puck, basic
Large puck, adjustable
X
Y
Z
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12, 4-pole2 m orange, PVC cable EVT064
Socket, M12, 4-pole5 m orange, PVC cable EVT001
36
Position sensors
Valve feedback sensor with easy wiring
Valve feedback systems for rising stemvalves and quarter-turn actuators
Heavy-duty housing for long life
Integrated solenoid wiring
Lasered label can be read evenwhen wet
Clearly visible status indication
Spacious terminal chamber foreasy access
End position feedback on quarter-turn actuatorsThe unit contains two inductive sensors in a potted and sturdy housingwith protection rating IP 67. It signals two end positions. It is equipped witha solenoid connection replacing the additional cable to the solenoid valve.
Fast and easy wiringThe actuator interface is optionally equipped with a standardised M20 x 1gland. The spacious terminal chamber allows quick and easy wiring. Sincethe terminal block can be removed, no new wiring is required if the sensoris replaced.A UL approval for this product is currently in progress.
37
(11.2016)
For further technical details please visit: www.ifm.com
Ambienttemperature
[°C]
Protection Orderno.
Terminal chamber
20…250 AC/DC -25...70 IP65 / IP67, II IN01312 x M20 x 1.5
Outputfunction
2 x normally open
ConnectionSensor / valve
Ub
[V]
Switching frequency [Hz] 25 AC / 50 DC
Sensing range [mm] 4
Electrical design AC/DC
Housing material PA
Minimum load current [mA] 5
Leakage current [mA]< 2.5 (250 V AC),< 1.3 (110 V AC),< 0.8 (24 V DC)
Current rating [mA](Duration)
350 AC (...50 °C) / 250 AC (...70 °C) /
100 DC
Current rating [mA](In brief)
î: 2.2 A (20 ms / 0.5 Hz)
Environmental conditions [°C] -25...70
Connection Screw terminals
Further technical dataDimensions
33
92
6,3
18,8
60
7,5
5,5
3060M
20x1
,5
1) Sensor 12) Sensor 23) LED OUT 24) LED OUT 1
Accessories
Type Description Orderno.
Plug for covering the oblong holes,EPDM E12212
Protective cap, PA 6.6 E12209
Target puck Ø 53 mm E17320
Target puck Ø 102 mm E17328
Spacer for ifm puck, PA E12084
Cable gland, M20 x 1.5, PA 6.6 E12208
4
6
7
8
5 IN +
IN -
OUT +
OUT -
3 A1
1
2L1 / L+
A2
2 A
Wiring diagram
38
Position sensors
Feedback for handvalves
Valves sensors, accessories
Suitable for ISO top flange valves from F04 to F10
Easy installation on manual valves and ball valves
Height-adjustable for flexibility
Stainless steel components for long life
Ideal for hazardous areas
End position feedback for manual valves and ball valvesWith this mounting kit, you can very easily equip your manual valves withsensors and target pucks. A large number of sensors and pucks can beused on the 80 x 30 mm actuator interface to VDI /VDE 3845. The entiresystem can be used at ambient temperatures from -30 to +80 °C.
Versatile and flexibleThe upper part is made out of Vestamid and allows operation in hazardousareas. The lower part fits on many ISO flange valves (DIN EN ISO 5211) andis connected to the valve shaft by a shaft extension. Stainless steel components guarantee increased service life.
39
(11.2016)
E12520 (F05/M5)/
E12521(F05/M6)
E12524(F10/M8)
Order no.
E12522(F07/M6)/
E12523(F07/M8)
E12519 (F04/M5)
Accessories
Type Description Orderno.
Inductive sensor, PBT, M12 connector IN5327
Target puck Ø 53 mm, PA 6, V2A (1.4302) E17320
Plug for covering the oblong holes,EPDM E12212
NN5008
For further technical details please visit: www.ifm.com
20.70A
B
C
D
H1
H2
20
60
54
D4
D5
42
5.3
60
70
H3
H4
80
90
H5 100
24.36
15
60
54
50
6.5
60
70
80
90
100
34.50
15
65
54
70
8.5
60
70
80
90
100
52.12
15
93
74
102
11
80
90
100
110
120
Dimensions
Connection technology
Type Description Orderno.
Socket, M12,5 m orange, PVC cable EVT001
Socket, M12, ATEX approval5 m, blue, PUR cable ENC02A
Switching amplifiers for Namur sensors, 2 channels N0532A
AS-i sensor, M12 connector AC2315
NAMUR sensor (1D,1G, 2G), M12 connector
15C
4
4,8
25
5
620
12H
1H
2H
3H
4H
5
A
DB
13
4,8
D5
12
4
60
4
M
D4
40
Sensors for motion control
Intelligent incremental encoder with display and IO-LinkEncoders
Resolution of 1...10,000 and signal level (TTL / HTL) freelyprogrammable
Display: Two-colour electronic rotatabledisplay of the process values
Versatile: M12 connector can be used radially or axially
Standard fitting: Solid shaft(clamp / synchro flange) or hollow shaft design
Motion controller: Encoder, speed/direction monitorand counter all in oneThe magnetic sensing principle provides the accuracy of photoelectric encoders and the robustness of magnetic systems.Resolution and signal level can be programmed. The encoders have a widevoltage range of 4.75...30 V DC and are therefore suited for universal use.Performance Line encoders have an integrated signal evaluation for speedmonitoring, counter functions and detection of the direction of rotation.They provide easy setting, position indication by means of display and operating keys and intuitive menu navigation.Diagnostic and parameter data are reliably transferred via IO-Link. Ready for Industry 4.0.
41
(04.2017)
For further technical details please visit: www.ifm.com
Flange IO-LinkResolution
[pulse/revolution]
Orderno.
Hollow shaft with single stator coupling · 4-digit display · Integrated pulse evaluation
direct •max. 10,000 (adjustable) ROP52012
Operating voltage
[V DC]
4.75...30
Shaft Ø
[mm]
Solid shaft · 4-digit display · Integrated pulse evaluation
synchro •max. 10,000 (adjustable) RUP5006 4.75...30
clamp flange •max. 10,000 (adjustable) RVP51010 4.75...30
Protection IP 65, IP 67
Connection M12 connector (rotatable)
Further technical data
58
ROP521
58
58
Housing Ø
[mm]
Switching frequency [kHz] 1000
Accessories
Type Description Orderno.
Spring disc coupling, Ø 6 mm / 10 mm, die-cast zinc; PA E60117
Spring disc coupling, Ø 10 mm / 10 mm, die-cast zinc; PA E60118
Flexible coupling with clamp connection,Ø 6 mm / 10 mm, aluminium E60066
Flexible coupling with clamp connection,Ø 10 mm / 10 mm, aluminium E60067
Flexible coupling with adjusting screws,Ø 10 mm / 10 mm, aluminium E60022
Flexible coupling with adjusting screws,Ø 6 mm / 10 mm, aluminium E60028
Measuring wheel, Ø 159.15 mm / 10 mm, Hytrel TPE-E E60110
Measuring wheel, Ø 159.16 mm / 10 mm, aluminium, PU E60076
Measuring wheel, Ø 63.66 ± 0.1 mm / 10 mm, Hytrel TPE-E E60138
Measuring wheel, Ø 63.6 mm, 10 mm, aluminium E60095
Measuring wheel, Ø 63.66 ± 0.1 mm / 6 mm, aluminium E60137
Measuring wheel, Ø 63.6 mm, 6 mm, aluminium E60006
Angle bracket for RUP design,aluminium, black anodised E60033
Angle bracket for RUP design,aluminium, black anodised E60035
Stator coupling for ROP / RO3 design E60205
Fastening clamp for synchro flange, steel E60041
Memory plug, parameter memoryfor IO-Link sensors E30398
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
Accessories
Type Description Orderno.
Connection technology
Type Description Orderno.
M12 socket, shielded,5 m black, PUR cable, 8 poles E12403
M12 socket, shielded,10 m black, PUR cable, 8 poles E12404
M12 socket, shielded,2 m black, PUR cable, 8 poles E12402
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols:IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
Adapter cable for the connectionbetween USB IO-Link master E30390and 3-pole / 8-pole encoder
E12432
Flexible coupling with clamp connection,Ø 6 mm / 1/4", aluminium E60206
Flexible coupling with clamp connection,Ø 6 mm / 3/8", aluminium E60207
Flexible coupling with clamp connection,Ø 10 mm / 1/2", aluminium E60208
Flexible coupling with clamp connection,Ø 10 mm / 3/8", aluminium E60209
Connection cable, M23 plug / M12 socket, PUR cable, shielded,0.3 m black, 8 poles
E12460
direct •max. 10,000 (adjustable)12 4.75...3058
Hollow shaft with double stator coupling · 4-digit display · Integrated pulse evaluation
42
Sensors for motion control
Programmable incremental encoderwith IO-Link
Encoders
Flexible: Resolution of1...10,000 freely programmable
Simple: Signal level can be setin TTL or HTL logic
Universal: M12 connector or radial or axial cable entry
Standard fitting: Solid shaft(clamp / synchro flange) or hollow shaft design
Communicative: Transfer of process and diagnostic data via IO-Link
No compromisesThe magnetic sensing principle provides the accuracy of photoelectric encoders and the robustness of magnetic systems.The days of confusing type variety and encoders with complicated programming are finally over! The new incremental encoders from ifm electronic can be used universally due to the intelligent product andfunction design, and stand out thanks to a superb price/performance ratio:• Set the resolution individually• Choose between TTL or HTL logic• Use the rotatable M12 connector radially or axially
IO-Link communicationProcess values, parameter setting and diagnostic data can now be transmit-ted via IO-Link. So, settings can be simply made prior to installation.
43
(04.2017)
For further technical details please visit: www.ifm.com
Accessories
Type Description Orderno.
Spring disc coupling, Ø 6 mm / 10 mm, die-cast zinc; PA E60117
Spring disc coupling, Ø 10 mm / 10 mm, die-cast zinc; PA E60118
Flexible coupling with clamp connection,Ø 6 mm / 10 mm, aluminium E60066
Flexible coupling with clamp connection,Ø 10 mm / 10 mm, aluminium E60067
Flexible coupling with adjusting screws,Ø 10 mm / 10 mm, aluminium E60022
Flexible coupling with adjusting screws,Ø 6 mm / 10 mm, aluminium E60028
Measuring wheel, Ø 159.15 mm / 10 mm, Hytrel TPE-E E60110
Measuring wheel, Ø 159.16 mm / 10 mm, aluminium, PU E60076
Measuring wheel, Ø 63.66 ± 0.1 mm / 10 mm, Hytrel TPE-E E60138
Measuring wheel, Ø 63.6 mm, 10 mm, aluminium E60095
Measuring wheel, Ø 63.66 ± 0.1 mm / 6 mm, aluminium E60137
Measuring wheel, Ø 63.6 mm, 6 mm, aluminium E60006
Flange IO-LinkResolution
[pulse/revolution]
Orderno.
Hollow shaft with integrated stator coupling
direct •max. 10,000 (adjustable) RA31006
Connection
M12
direct •max. 10,000 (adjustable) RA35006 cable, 2 m
direct •max. 10,000 (adjustable) RO310012 M12
direct •max. 10,000 (adjustable) RO350012 cable, 2 m
Shaft Ø
[mm]
Solid shaft
universal •max. 10,000 (adjustable) RB31006 M12
universal •max. 10,000 (adjustable) RB35006 cable, 2 m
servo •max. 10,000 (adjustable) RU31006 M12
servo •max. 10,000 (adjustable) RU35006 cable, 2 m
clamp flange •max. 10,000 (adjustable) RV310010 M12
clamp flange •max. 10,000 (adjustable) RV350010
36.5
36.5
58
58
Hollow shaft with 2 integrated stator couplings
• RA31016
• RA35016
• RO310112
• RO350112
36.5
36.5
58
58
Housing Ø
[mm]
36.5
36.5
58
58
58
58 cable, 2 m
Angle bracket for RB and RU design,aluminium, black anodised E60033
Angle bracket for RV design,aluminium, black anodised E60035
Switching frequency [kHz] 1000
Operating voltage [V DC] 4.75...30
Protection IP 65, IP 67
Further technical data
Memory plug, parameter memoryfor IO-Link sensors E30398
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
Accessories
Type Description Orderno.Fastening clamp for
synchro flange, steel E60041
Connection technology
Type Description Orderno.
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols:IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
M12 socket, shielded,5 m black, PUR cable, 5 poles EVC545
M12 socket, shielded,10 m black, PUR cable, 5 poles EVC546
M12 socket, shielded,2 m black, PUR cable, 5 poles EVC544
direct max. 10,000 (adjustable) M12
direct max. 10,000 (adjustable) cable, 2 m
direct max. 10,000 (adjustable) M12
direct max. 10,000 (adjustable) cable, 2 m
44
Sensors for motion control
Robust speed sensors – also with ATEX approval
Speed sensors
Robust M30 metal housing, no additional impact protectionhousing required
Ideal in combination with a PLC
Flush installation
Voltage supply: 20...250 AC/DC or 24 V DC
ATEX approval group II, category 3D
Compact speed monitoringThe new speed sensors are the compact solution for speed monitoring because the evaluation electronics are integrated in the sensor housing.The limit at the speed of which the output switches is set via a potentio-meter. Both rotary and linear movements can be monitored for overspeed,underspeed and blockage.As compared to its predecessors, these new sensors feature a robust metal housing for flush mounting. A special version with ATEX approval isavailable for which no additional impact protection is required.
45
(04.2017)
For further technical details please visit: www.ifm.com
Operating voltage
[V]
Start-up-delay
[s]
Ambienttemperature
[°C]
ATEX approvalMax. load current
[mA]
Orderno.
M30 x 1.5 inductive sensor · connection cable
20...250 AC/DC (45...65 Hz, AC) 12 -25...80 –350 AC (50 °C),
250 AC / 100 DC (80 °C) DI0101
20...250 AC/DC (45...65 Hz, AC) < 0.5 -25...80 –350 AC (50 °C),
250 AC / 100 DC (80 °C) DI0104
20...250 AC/DC (45...65 Hz, AC) 12 -20...60 Group II,
category 3D200 AC / 100 DC
(60 °C) DI103A
24 DC 15 -25...80 –250 DC(80 °C) DI5020
24 DC 5 -25...80 –250 DC(80 °C) DI5021
24 DC 0 -25...80 –250 DC(80 °C) DI5022
24 DC 15 -25...60 Group II, category 3D
250 DC(60 °C) DI520A
Further technical dataAdvantagesThe speed sensors incorporate the complete speed monitoring because the evaluation electronics and thesensor are integrated in one housing. The switch pointis set using a multi-turn potentiometer. Hysteresis andstart-up delay are firmly set.
OperationThe integrated sensor is damped by passing cams orother metallic targets. The evaluation unit determinesthe period duration or the frequency (actual rotationalspeed value) on the basis of the time interval betweendamping and compares it to the set switch point (preset value). The output is switched during the start-up delay andwhen the rotational speed exceeds the set switchingvalue.An LED signals underspeed and switch-off of the output.
Dimensions
8075,5
M30
x1,5
5,4
2,2
365
1
LEDs
1) potentiometer
WH
BK
L1L+
LN
BN
BK
BU
L+
L
Wiring
Setting range [pulses/min] 5...3600
Switch point setting Multiturnpotentiometer
Switching status indication LED 2 x yellow
Housing materialsBrass
special coating; PA (Polyamid); TPE-U
Connection PUR cable, 2m
Protection rating IP 65, IP 67
Protection class II
Target wheel E89010
Clamp with damping cams E89013
Accessories
Type Description Orderno.
Angle bracket for M30 types E10737
Lock nuts, nickel-plated brass E10030
Lock nuts, high-grade stainless steel(316Ti/1.4571) E10031
Mounting set, free-standing M12 clamp mounting, Ø 30.2 mm E20873
Mounting set, aluminium profileclamp mounting, Ø 30.2 mm E20875DI0101, DI0104, DI103A, DI5020, DI5021, DI5022, DI520A
46
Sensors for motion control
Robust speed sensors – for the first time with ATEX approval and IO-LinkSpeed sensors
Robust M30 metal housing, no additional impact protectionhousing required
ATEX approval group II, category 3D
Ideal in combination with a PLC
Flush installation
Detect actual speed and set parameters via IO-Link
Compact speed monitoringThe new speed sensors are the compact solution for speed monitoring because the evaluation electronics are integrated in the sensor housing.The limit at the speed of which the output switches is set via a potentio-meter or IO-Link. Both rotary and linear movements can be monitored foroverspeed, underspeed and blockage.As compared to its predecessors, these new sensors feature a robust metal housing for flush mounting. A special version with ATEX approval isavailable for which no additional impact protection is required.
47
(04.2017)
For further technical details please visit: www.ifm.com
Operating voltage
[V]
Start-up-delay
[s]
Ambienttemperature
[°C]
ATEX approvalMax. load current
[mA]
Orderno.
M30 x 1.5 inductive sensor · connection cable
Further technical dataApplicationsEspecially in the field of conveying technology the compact speed sensors can be used for various applica-tions, for example for monitoring belt conveyors orbucket elevators. Here they are typically used to monitor underspeed, blockage or standstill.
AdvantagesThe speed sensors incorporate the complete speed monitoring. The switch point can be set using a multi-turn potentiometer. IO-Link provides additional functions such as remote information about the current speed or the switchpoint and the configuration of important additional parameters such as the start-up delay time. This allows direct communication with the controller or the SMARTOBSERVER.
OperationThe integrated sensor is damped by passing cams orother metallic targets. The evaluation unit determinesthe period duration or the frequency (actual rotationalspeed value) on the basis of the time interval betweendamping and compares it to the set switch point (preset value). The output is switched during the start-up delay andwhen the rotational speed exceeds the set switchingvalue.An LED signals underspeed and switch-off of the output.
Dimensions
8075,5
M30
x1,5
5,4
2,2
365
1
LEDs
1) potentiometer
BN
BK
BU
L+
L
Wiring
Setting range [pulses/min] 5...3600
Switch point setting Multiturnpotentiometer
Switching status indication LED 2 x yellow
Housing materialsBrass
special coating; PA (Polyamid); TPE-U
Connection PUR cable, 2m
Protection rating IP 65, IP 67
Protection class II
Target wheel E89010
Clamp with damping cams E89013
Accessories
Type Description Orderno.
Angle bracket for M30 types E10737
Lock nuts, nickel-plated brass E10030
Lock nuts, high-grade stainless steel(316Ti/1.4571) E10031
Mounting set, free-standing M12 clamp mounting, Ø 30.2 mm E20873
Mounting set, aluminium profileclamp mounting, Ø 30.2 mm E20875
24 DC 15 -25...80 –250 DC(80 °C) DI5026
24 DC 15 -25...60 Group II, category 3D
250 DC(60 °C) DI523A
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
48
Sensors for motion control
Multifunctional analogue display
Systems for the evaluation of standard signals
Clearly legible display
Touch display and clear text for intuitive handling
Change of display to red/yellow/green when set limit is exceeded or not reached
16-bit resolution
Additional functions such as tare, filter, averaging, signal combination
Analogue display 4.0The new multifunctional display is more than just a display: It pre-processes digital signals in a decentralised manner and, if necessary,passes this information on to a higher-level controller. This intelligent feature makes it ideally suited for Industry 4.0 applications.
Versatile analogue value displayThe intelligent display visualises different process parameters of sensorswith an analogue output or of transmitters with a standard signal output.The freely adjustable scaling factors make it possible to convert and indicate the input signals as physical values (e.g. pressure, temperature or volumetric flow quantity). If you use a pressure transmitter, for example, the volume of a tank can bedisplayed. It is also possible to offset input signals against each other, e.g.for differential pressure measurement.
49
(04.2017)
For further technical details please visit: www.ifm.com
Analogue inputs -10...+10 V, 0...20 mA / 4...20 mA
Operating voltage
[V]
Type Inputsanalogue
Inputsprogrammable
Outputs transistor
Orderno.
Multifunction display · touch display and clear text
115 / 230 AC24 DC 2 3 – DX2041
115 / 230 AC24 DC 2 3 4 DX2042
24 DC 2 3 – DX2051
24 DC 2 3 4 DX2052
User-friendly handlingAll settings can be made via a modern, resistive touch-screen interface. The display automatically changesfrom display mode to parameter setting mode.All parameters are displayed in clear text on the screen,enabling an easy and intuitive use. A password mechanism provides protection againstmanipulation.
Monitoring of limit valuesThe user can define up to four limit values. Up to fourtransistor outputs switch if a set limit is not reached orexceeded. The states of the outputs are displayed and the colourof the display can be shown in red, yellow or green depending on the process value.
The basic functions:Single mode: one-channel operation (only input A)Dual mode: two-channel operation (input A and B separately)A a B: summation mode (input A + input B) A – B: differential mode (input A - input B) A d B: dividing mode (relation A : B) A m B: multiplication mode (product A x B)
Operating voltage [V DC] [V AC]
18...30115 / 230
Current consumption (DC) approx. 100 mA (without load)
Sensor supply (DC) [V DC] Output current
UB -1 Vmax. 250 mA
Current consumption (AC) approx. 3 VA (without load)
Sensor supply (AC) [V DC] Output current
approx. 24 V DC (± 15 %)150 mA to 45 °C,80 mA from 45 °C
Control inputs Format Frequency
HTL, PNP (10...30 V)max. 10 kHz
Control outputs(DX2042, DX2052) Format / level
Output current
5...30 V (depending on the voltage on Com+), PNPmax. 200 mA (max. 150
mA at Com+ <10 V)
Display Type Colour
Handling
LCD (backlight)red/yellow/green
(selectable)Touch screen (resistive)
Ambient temperature [°C] -20...45/60
Dimensions (W x H x D) [mm] 112 x 48 x 116
Common technical data
Dimensions
48
96 116112
50
Sensors for motion control
Multifunctional display: speed, time, counter
Systems for pulse evaluation
Clearly legible display
Touch display and clear text forintuitive handling
Change of display to red/yellow/green when set limit is exceeded or not reached
4 optional switching outputsand/or analogue outputs (V or mA)
PNP, NPN or NAMUR inputs
Digital display 4.0The new multifunctional display is more than a simple display: It pre-processes digital signals in a decentralised manner and passes the information on to a higher-level controller if necessary. This intelligent feature makes it ideally suited for Industry 4.0 applications.
Versatile pulse evaluationThe multifunction display shows various measured values in industrial automation. It uses the principle of interval measurement to processesinput pulses. The scaling factor allows (rotational) speed and processingtime, etc., to be calculated, displayed and converted into an analogue signal. Moreover, the unit is suitable for counting and timer tasks.
51
(04.2017)
For further technical details please visit: www.ifm.com
Operating voltage [V DC] [V AC]
18...30115 / 230
Current consumption (DC) approx. 100 mA (without load)
Sensor supply (DC) [V DC] Output current
UB -1 Vmax. 250 mA
Current consumption (AC) approx. 3 VA (without load)
Sensor supply (AC) [V DC] Output current
approx. 24 V DC (± 15 %)150 mA to 45 °C,80 mA from 45 °C
Incremental inputs Usage
Format Frequency
PNP, NPN, Namur encodersand sensors
HTL (10...30 V)max. 250 kHz
Control inputs Format Frequency
HTL, PNP (10...30 V)max. 10 kHz
Analogue output(only DX2032, Voltage outputDX2022) Current output Resolution Accuracy
-10...10 V0...20 mA / 4...20 mA
16 bits± 0.1 %
Control outputs(DX2032, DX2033, Format / levelDX2022, DX2023) Output current
5...30 V (depending on the voltage on Com+), PNPmax. 200 mA (max. 150
mA at Com+ <10 V)
Display Type Colour
Handling
LCD (backlight)red/yellow/green
(selectable)touch screen (resistive)
Ambient temperature [°C] -20...45/60
Dimensions (W x H x D) [mm] 112 x 48 x 116
Common technical data
Dimensions
48
96 116112
Operating voltage
[V]
Inputspulse
Inputsprogrammable
Outputs transistor
Output analogue
Orderno.
Multifunction display · touch display and clear text
24 DC 2 3 –– DX2031
24 DC 2 3 4V or mA DX2032
24 DC 2 3 4– DX2033
115 / 230 AC24 DC 2 3 –– DX2021
115 / 230 AC24 DC 2 3 4V or mA DX2022
115 / 230 AC24 DC 2 3 4– DX2023
User-friendly handlingAll settings can be made via a modern, resistive touch-screen interface. The display automatically changesfrom display mode to parameter setting mode.All parameters are displayed in clear text on the screen,enabling an easy and intuitive use. A password mechanism provides protection againstmanipulation.
Monitoring of limit valuesThe user can define up to four limit values. Up to fourtransistor outputs switch if a set limit is not reached orexceeded. The states of the outputs are displayed and the colourof the display can be shown in red, yellow or green depending on the process value.
The basic functions:Speed:Indication of rotational speed (RPM), operation as tachometer or for frequency measurement.Process time:Operation as baking time or processing time display (reciprocal rotational speed).Timer:Operation as stop watch. Start and stop functions are freely configurable.Counter:Operation as position display, pulse, totalisator, differential, up or down counter.Velocity:Speed indication from operating time measurement. Input A serves as start input and input B as stop input.
Type
52
Sensors for motion control
Decentralised display, preprocessing and conversion ofanalogue signalsPulse evaluation systems
Mini display to monitor values
Clearly visible display withred/green colour change
Compact design with protection rating IP 67
Parameter setting via IO-Link
Conversion of analogue measured values to an IO-Linkcommunication
Analogue signals at a glanceThe compact connector unit is simply inserted in the connection cable ofanalogue sensors (4...20 mA). It displays the measured values locally. Theuser can set a switch point or limit at which the transistor output switches.A colour change (red /green) of the display indicates this unmistakably. Critical process states or operational problems are reliably signalled.
Converter for Industry 4.0A special feature is the signal conversion: The threshold display convertsanalogue signals to digital IO-Link signals. Today they are required in almostany modern industrial environment and for Industry 4.0 applications.
53
(11.2016)
Threshold displayDP2200
Dimensions
31
24
3
30
M12 x 1
M12 x 1
63
1
2
1) Push ring2) LEDs3) Display
Wiring diagram
43
2 1
3
1 2
45
M12: plugPin 1: L+ supplyPin 2: OUT2 analogue outputPin 3: L- supplyPin 4: OUT1 switching output 1 or IO-Link
M12: BuchsePin 1: L+ sensor supplyPin 2: 4...20 mA analogue inputPin 3: L- sensor supplyPin 4: not usedPin 5: not used
Typical plant configuration
sensor parameter setting
LINERECORDERsensor 4.0
IO-LinkThresholddisplaywithIO-Link
USBadapter
PLC
4...20 mA
4...20 mA
industrial fieldbus
4...20 mA
IO-Link masterIP67
PLC
industrial fieldbus
IO-Linksensors
withoutIO-Link
· · ·1 7 8
M
withoutIO-Link
Operating voltage [V DC] 27 (typ. 24)
Inputs 1 x analogue,4...20 mA
Ambient temperature [°C] -25...70
Protection IP 67
Output status indication LED yellow
Operation LED green
Wiring M12 connector
Outputs
1 x digital / IO-Link,normaly open / closed
programmable1 x analogue, 4...20 mA
Display
7-segment LED display 4-digit
red/green programmable
Technical data
For further technical details please visit: www.ifm.com
Accessories
Type Description Orderno.
Mounting clip E89208
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
54
Industrial imaging
Augmented reality:mobile 3D smart camera with overlayfunctionCamera systems for mobile machines
3D sensor system with inte-grated 2D camera and overlayfunction
Indication of warnings and obstacles in the live view
Signal processing in the sensor, no external process unit required
Easy adjustment via ifm Vision Assistant
Augmented realityThe 3D smart camera is the first 3D sensor system with integrated 2D camera.The video image is displayed with real-time graphics, symbols or texts. They are either triggered by the integrated driver assistance system or bythe machine controller via CAN. Thus, the user can always see all relevantwarnings or other relevant details in the camera image.
Integrated assistance systemIn addition to the 3D and 2D image sensor a complete evaluation system is integrated in the sensor system. This system provides an independent assistance system for collision avoidance for the user. Set-up only requiresjust a few steps using the ifm Vision Assistant PC software. In addition tothe analogue video output the smart camera also features a CAN andEthernet UDP interface. The system can use this interface to supply warningsin critical situations autonomously.
55
(04.2017)
For further technical details please visit: www.ifm.com
Further technical dataO3M251
Housing material diecast aluminium
PAL resolution [pixels] 640 x 480
Type of sensor 1/4" 4:3 VGA CMOS image sensor Color
Connection M12 connector
Protection rating, protection class
IP 67 / IP 69K, III
Operating voltage [V DC] 9...32
Current consumption sensor [mA] < 500
Current consumption [A]system illumination unit < 5
Ambient temperature [°C] -40...85
Interfaces1x CAN,
1 x fast Ethernet, 1x PAL
Storage temperature [°C] -40...105
Supported CAN protocols CANopen, SAE J 1939
Standards and tests (extract)
CE,E1 (UN-ECE R10)
Resolution
[pixels]
Angle of aperturehorizontal x vertical
[°]
IlluminationAngle of aperture2D[°]
Orderno.
PMD 3D sensor · Type O3M · M12 connector
64 x 16 70 x 23 Ext. illumination required (O3M950)90 O3M251
Max. sampling rate
[Hz]
25/33/50
Accessories
Type Description Orderno.
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
Weather protective cover (the article E3M100 or E3M102 is required for installation)
E3M101
U-shaped bracket, suitable for sensor or illumination unit E3M102
Connection technology
Type Description Orderno.
MCI cable, connection sensor / system illumination unit, 0,25 m E3M120
MCI cable, connection sensor / system illumination unit, 1 m E3M121
MCI cable, connection sensor / system illumination unit, 2 m E3M122
MCI cable, connection sensor / system illumination unit, 3 m E3M123
M12 video connection cable, connectionsensor / display PDM360, 5 m E3M151
M12 video connection cable, connectionsensor / display PDM360, 11 m E3M152
M12 video connection cable, connectionsensor / display PDM360, 16 m E3M153
M12 video connection cable, connectionsensor / display PDM360, 21 m E3M154
M12 socket, voltage supply system illumination unit, 2 m, PUR cable, 4 poles
E3M131
M12 socket, voltage supply system illumination unit, 5 m, PUR cable, 4 poles
E3M132
M12 socket, voltage supply system illumination unit, 10 m, PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, cross-over patch cable,10 m, PVC cable, M12 / RJ45 E12204
Ethernet, cross-over patch cable,20 m, PVC cable, M12 / RJ45 E12205
CAN jumper, screened, 2 m, PUR cable, M12 plug / M12 socket
E11593
CAN jumper, screened, 5 m, PUR cable, M12 plug / M12 socket
E11594
CAN jumper, screened, 10 m, PUR cable, M12 plug / M12 socket
E11595
M12 video extension cable, 5 m E3M159
M12 video adapter cable / Cinch plug,for connection of a video grabber, 1 m E3M160
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 70 x 23
O3M950
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 95 x 32
O3M960
64 x 16 95 x 23 Ext. illumination required (O3M960)120 O3M26125/33/50
56
Industrial imaging
Mobile 3D camera –2D and 3D in oneunit
Camera systems for mobile machines
Robust outdoor camera plat-form for innovative functiondevelopment
Synchronous output of 3Dpoint cloud and live cameraimage
Robust raw data, independentof ambient light and colour
Video output (PAL) and Ethernet UDP
High shock and vibration resistance
Two images in one unitThe O3M250 is the first 3D sensor system with integrated 2D camera forthe output of a calibrated video image. In this context, calibrated meansthat the 2D image is superimposed on the 3D image.
For external evaluationThe camera system has been designed for system integrators and customerswho intend to use 3D sensor data with their own algorithms in an externalprocess unit. The image is sent as a PAL video image and the 3D point cloudis transmitted via Ethernet UDP.
Easy setupifm offers the Windows software “ifm Vision Assistant” for setup and parameter setting.
57
(04.2017)
For further technical details please visit: www.ifm.com
Further technical dataO3M250
Housing material diecast aluminium
PAL resolution [pixels] 640 x 480
Type of sensor 1/4" 4:3 VGA CMOSimage sensor Color
Connection M12 connector
Protection rating, protection class
IP 67 / IP 69K, III
Operating voltage [V DC] 9...32
Current consumption sensor [mA] < 500
Current consumption [A]system illumination unit
< 5
Ambient temperature [°C] -40...85
Interfaces 1 x fast Ethernet, 1x PAL
Storage temperature [°C] -40...105
Standards and tests (extract)
CE,E1 (UN-ECE R10)
Accessories
Connection technology
Type Description Orderno.
Resolution
[pixels]
Angle of aperturehorizontal x vertical
[°]
IlluminationAngle of aperture2D[°]
Orderno.
PMD 3D sensor · Type O3M · M12 connector
64 x 16 70 x 23 Ext. illumination required (O3M950)90 O3M250
Max. sampling rate
[Hz]
25/33/50
Type Description Orderno.
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 70 x 23
O3M950
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
MCI cable, connection sensor / system illumination unit, 0,25 m E3M120
MCI cable, connection sensor / system illumination unit, 1 m E3M121
MCI cable, connection sensor / system illumination unit, 2 m E3M122
MCI cable, connection sensor / system illumination unit, 3 m E3M123
M12 video connection cable, connectionsensor / display PDM360, 5 m E3M151
M12 video connection cable, connectionsensor / display PDM360, 11 m E3M152
M12 video connection cable, connectionsensor / display PDM360, 16 m E3M153
M12 video connection cable, connectionsensor / display PDM360, 21 m E3M154
M12 socket, voltage supply system illumination unit, 2 m, PUR cable, 4 poles
E3M131
M12 socket, voltage supply system illumination unit, 5 m, PUR cable, 4 poles
E3M132
M12 socket, voltage supply system illumination unit, 10 m, PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, cross-over patch cable,10 m, PVC cable, M12 / RJ45 E12204
Ethernet, cross-over patch cable,20 m, PVC cable, M12 / RJ45 E12205
CAN jumper, screened, 2 m, PUR cable, M12 plug / M12 socket
E11593
CAN jumper, screened, 5 m, PUR cable, M12 plug / M12 socket
E11594
CAN jumper, screened, 10 m, PUR cable, M12 plug / M12 socket
E11595
M12 video extension cable, 5 m E3M159
M12 video adapter cable / Cinch plug,for connection of a video grabber, 1 m E3M160
Weather protective cover (the article E3M100 or E3M102 is required for installation)
E3M101
U-shaped bracket, suitable for sensor or illumination unit E3M102
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 95 x 32
O3M960
64 x 16 95 x 23 Ext. illumination required (O3M960)120 O3M26025/33/50
58
Industrial imaging
True 3D vision sensor with intelligentfunctions
Camera systems formobile machines
Simple application solutionsthanks to preprocessed 3D data
Easy integration via predefinedCODESYS function blocks
Patented pmd time-of-flighttechnology for quick distancedetection
Optimised for reliable outdooruse with IP 67 and IP 69K
Angle of aperture up to 95°
Mobile 3D smart sensors O3MThe 3D detection of scenes and objects, already a standard on the factoryfloor, is ready for mobile machines. Apart from new possibilities for vehicleautomation (AGV, automatic guided vehicles) this results in new assistancefunctions for automation tasks.Different integrated functions configurable via the Windows software areavailable as standard.The simple connection of the 3D smart sensors is carried out via the CAN bus for mobile applications using the CANopen or SAE J 1939 protocol and/orvia the fast Ethernet interface using UDP.
59
(11.2016)
For further technical details please visit: www.ifm.com
Description Orderno.
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 70 x 23 O3M950
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 95 x 32 O3M960
Further technical dataSmart sensors O3M151, O3M161
Accessories
Housing material diecast aluminium
Device connection M12 connector
Protection rating, protection class
IP 67 / IP 69K, III
Operating voltage [V DC] 9...32
Functions and advantages
Powerful 3D time-of-flight measurement (ToF)The principle of these 3D sensors is based on ifm’s patented and award-winning pmd technology. It was specifically designed for outdoor use and difficultambient light situations. Even interference such as sun-light or materials with different reflective characteristicsdo not influence the repeatability of the measured data.Powerful electronicsThe integrated 2 x 32-bit processor architecture ensuresa rapid and reliable calculation of the 3D data andfunctions directly integrated in the system with up to50 fps. The complete electronics of the mobile 3D smart sensor is optimised and adapted to the demands andrequirements of mobile machines. Besides shock and vibration resistance self-diagnosticfunctions from the sensor to the IR system illuminationunit are of course also available.Smart functionsThe mobile 3D smart sensors integrate some functionswhich enable a multitude of applications to be solved. A highly developed algorithm from the automotive industry is used ensuring, for example, reliable automatic object recognition of up to 20 objects. This functioncan, for example, be used as collision warning. For simple distance tasks typical functions such as minimum / maximum / average distance are available.System parameter setting and monitoringThe parameter setting of the system and live monitoring of the 3D data are carried out via the easy-to-use ifmvision wizard for Windows. As an alternative, parameter setting can also be carried out via function blocks usingthe software CODESYS.Communication interfacesThe preprocessed function data is output via the CANbus using CANopen or SAE J 1939. If needed, the complete 3D information can be processed at the sametime via Ethernet UDP and an external process unit.
Current consumption sensor [mA] < 400
Current consumption [A]system illumination unit < 5
Ambient temperature [°C] -40...85
Interfaces 1x CAN, 1 x fast Ethernet
Supported CAN protocols CANopen, SAE J 1939
Standards and tests (extract)
CE,E1 (UN-ECE R10)
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
U-shaped holder, suitable for sensor or illumination unit E3M100
Connection technology
MCI cable, connection sensor / system illumination unit, 1 m E3M121
MCI cable, connection sensor / system illumination unit, 2 m E3M122
Type Description Orderno.
M12 socket, voltage supply system illumination unit, 2 m, PUR cable, 4 poles
E3M131
M12 socket, voltage supply system illumination unit, 10 m, PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, cross-over patch cable,10 m, PVC cable, M12 / RJ45 E12204
Type of sensor Resolution pixels [pixel]
IlluminationAngle of aperturehorizontal x vertical
[°]
Orderno.
PMD 3D sensor · Type O3M · M12 connector
PMD 3D chip 64 x 16 ext. illumination required (O3M950)70 x 23 O3M151
Max. sampling rate
[Hz]
25/33/50
PMD 3D chip 64 x 16 ext. illumination required (O3M960)95 x 32 O3M16125/33/50
60
Industrial imaging
MultiViewBox: display up to 4 camera images on one screenCamera systems for mobile machines
Video splitter for up to four camera images
9 different display modes (incl. bird’s eye view)
Analogue video output (PAL)
Shock and vibration resistant,potted stainless steel housing
E4 type approval, optimised for use in mobile machines
Suitable camera images in every situationThe multi-view box has been designed for use in mobile machines in harshenvironments. It features four camera inputs. Depending on the require-ments, 1, 2 or 4 camera images can be selected simultaneously in differentarrangements via one control input. For example: Cam1 when moving for-wards and Cam2 and 3 when moving backwards. In the “bird’s eye view” 4 camera images can even be combined to become one 360° view. A totalof 9 different display modes are available for the user.
Analogue video outputThe ifm PDM360 dialogue module with analogue video input which is alsosuitable for mobile use or any other video display with PAL video input canbe used as display.
61
(11.2016)
For further technical details please visit: www.ifm.com
Connection technology
Type Description Orderno.
Connection cable, M16, 3,85 m, 8 poles, for the voltage supply of the E2M250 multi-view box, open cable end
E2M251
Socket, M16, wirable 8 poles, for the voltage supply of theE2M250 multi-view box
E2M252
Adapter cable, 0.6 m black, PVC cable,M12 connector / M16 socket, to connectthe MultiViewBox to the PDM NG
E2M200
Jumper, 5 m black, PVC cable, M16 plug / M16 socket
E2M203
Jumper, 11 m black, PVC cable, M16 plug / M16 socket
E2M204
Jumper, 16 m black, PVC cable, M16 plug / M16 socket
E2M205
Jumper, 21 m black, PVC cable, M16 plug / M16 socket
E2M206
Current consumption [mA] < 1200
Video signal
PAL (25 fps, interlacing)
720H x 576V (active 680 x 480)
Ambient temperature [°C] -40...85
Protection IP 67 (ISO 20653)
Approval UN-ECE R10
Housing materials stainless steel SS316 (1.4401)
Connection M16 connector
MultiViewBoxE2M250
Technical data
Operating voltage [V DC] 10...32 DC
Products
Orderno.
Video splitter,visualisation of up to 4 camera images(PAL) on one process and dialogue mo-dule
E2M250
Type Description
Angle of aperture 78°,lens heating O2M200
Angle of aperture 78°, lens heating, integrated mirror function O2M201
Angle of aperture 115°,lens heating O2M202
Angle of aperture 115°, lens heating, integrated mirror function O2M203
MultiViewBox
Analogue camera, 0.5 m connection cable with M16 connector
Dimensions
180160
113,
510
0 73851,
540
1 2 3 4 5 6
1) INPUT2) OUTPUT3) C44) C35) C26) C1
62
Industrial imaging
Photoelectric 3Dlevel measurementand point level detection3D sensors
Continuous measurement ofuneven surfaces
Determines min, max or meanvalues
Teaching of different tank shapes
Interfering structures are suppressed
Non-contact detection of opaque media for levels of up to 10 m
Flexible configurationThe system detects solid, opaque solids and bulk materials in tanks, silos orhoppers with levels of up to 10 m. The O3D reliably detects the load heightin machinery for mechanical handling, e.g. belts, and the loading of pallets.The sensor determines the level via a defined background and transmits theprocess value via analogue output or digitally and noise immune via theEthernet process interface. Alternatively, the O3D may be used as a pointlevel switch.The measuring segment of the sensor can be adapted to the shape of therespective tank. Agitators and other attachments can be suppressed via“exclusion regions”. Various container shapes, such as hoppers, silos oreven inclined belts can be recognised by the sensor. This means that for bulk materials the average level is indicated, even ifthere are conical heaps or funnelling.
63
(11.2016)
For further technical details please visit: www.ifm.com
Mounting set for O3D E3D301
Further technical data
Accessories
Operating voltage [V DC] 20.4...28.8
Current consumption [mA]
< 2400 peak current pulsed;
typ. mean value 420
Current rating [mA](per switching output) 100
Real chip resolution 25,000 / 100,000
Resulting resolution 176 x 132 pixels
Function display LED 2 x yellow,2 x green
Illumination 850 nm,infrared
Ambient light [lux] max. 10,000 (indoor)
Trigger
external; 24 V PNP / NPN
according to IEC 61131-2 type 3
Switching inputs
2 (configurable), 24 V PNP/NPNaccording to
IEC 61131-2 type 3
Switching outputsdigital
3 (configurable), 24 V PNP/NPN, according to IEC 61131-2
Switching outputsanalogue
1 (can be configured as
current output 4...20 mAor voltage
output 0...10 V)
Ambient temperature [°C] -10...50
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, jumper cables,2 m, PVC cable, M12 / M12 E21138
Type of sensor Materialfront pane /LED window
Angle of aperture
[°]
Protection rating,protection class
Orderno.
PMD 3D sensors · Type O3D · M12 connector
PMD 3D ToF chip Gorilla glass /polyamide
Materialhousing
Aluminium 40 x 30IP 65 / IP 67,III O3D300
Max. field of view size
[m]
2.61 x 3.47
PMD 3D ToF chip Gorilla glass /polyamideAluminium 60 x 45IP 65 / IP 67,
III O3D3023.75 x 5.00
PMD 3D ToF chip Polycarbonate /polyamideStainless steel 40 x 30IP 65, IP 67, IP 69K /
III O3D3102.61 x 3.47
PMD 3D ToF chip Polycarbonate /polyamideStainless steel 60 x 45IP 65, IP 67, IP 69K /
III O3D3123.75 x 5.00
Socket, M12,2 m black, PUR cable, 8 poles E11950
Type Description Orderno.
Cooling element E3D302
Double cooling element E3D304
Heat conductor E3D303
Short-circuit protection, pulsed •
Overload protection •
Parameter setting interface Ethernet 10 Base-T / 100 Base-TX
Possible parameter settings via PC / notebook
Dimensions (H, W, D) [mm] 72 x 65 x 85
Technical data Level measurement and point level detection
Typ. level [m] 0.3...6
Operating distance max. [m] 10
Sampling rate [Hz] 5
Mounting accessories
Connection technology
64
Process sensors
PV pressure sensor –one sensor, two solutions
Pressure sensors
Two solutions: continuoustransmission of process valuesvia IO-Link and 2 switching outputs
Vast setting options and advanced diagnostics via IO-Link
Compact design (AF19) withprocess connection G 1/4
Switch point accuracy < ± 0.5 %, repeatability < ± 0.05 %
Robust low-cost solution withwelded stainless steel housing
Miniaturisation for industrial applicationsThe new PV pressure sensor features a thin-film measuring cell directly welded with the process connection. This technology guarantees high accuracy in a very compact housing with only 19 mm across flats at a cost-optimised price/performance ratio.ApplicationsWith the seal-less design of the process connection the sensors can be usednot only in hydraulic applications but also in inert gases. In industrial applications the laser labelling on the housing is also advantageous. Even in adverse environmental conditions, the sensor remains permanently identifiable. Another advantage is the integrated IO-Link interface. Thanksto IO-Link the new pressure sensor continuously transmits process valuesand other important data, e.g. a pressure peak counter. Moreover, the digital measurement results are more accurate because thereare no conversion losses by D/A converters or external influences (e.g. cablelengths).
65
(04.2017)
For further technical details please visit: www.ifm.com
Accessories
Type Description Orderno.
Operating voltage [V DC] 18...30
Common technical data
Medium temperature [°C] -40...90
Materials in contact with the medium
FKM, high-grade stainless steel
(316L/1.4542)
Protection IP 67 / IP 69K
Restrictor element integrated •
Communication interfaceIO-Link 1.1
COM2 slave;38.4 kbaud
Reverse polarity protection •
Current rating [mA] 100
Switching frequency [Hz] ≤ 170
Response time [ms]Switching output < 3
Adapter; G 1/4 - G 1/2, high-grade stainless steel (316Ti/1.4571) E30135
Measuring rangeRelative pressure
[bar]
Poverloadmax. (static)
[bar]
Pburstmin.[bar]
Orderno.
Output function 2 x DC PNP/NPN, IO-Link
0...400 1700 PV7000
0...250 1200 PV7001
0...100 1000 PV7002
0...60 900 PV7023
Accuracy / deviation(in % of the span)Linearity errorSwitch point accuracyLinearityHysteresisRepeatabilityLong-term stabilityTemperature coefficient (TEMPCO) in the temperature range -40…90 °C (in % of the span per 10 K)TEMPCO of zero
TEMPCO of the span
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
BN
WH
BK
BU
4
1
3
2 OUT2
L+
L
OUT1
Wiring
Dimensions
12
6652
M12 x119
G1 4/
19
1
1) seal
1000
625
250
150
-1...25 600 PV7003
-1...10 300 PV7004
65
25
< ± 0.5< ± 0.5
< ± 0.1 (BFSL) / < ± 0.2 (LS)< ± 0.2< ± 0.05< ± 0.1
< ± 0.1 (-25…90 °C) / < ± 0.2 (-40…25 °C)< ± 0.1 (-25…90 °C) / < ± 0.2 (-40…25 °C)
IO-Link interface for parameter settingand analysis of units with DTM specification, current consumptionvia USB port: max. 500 mA
E30396
Memory plug, parameter memoryfor IO-Link sensors E30398
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
OUT1: switching output or IO-LinkOUT2: switching outputColours to DIN EN 60947-5-2
66
Process sensors
Pressure transmitters with DEUTSCH, AMPor M12 connector for mobile applicationsPressure sensors
Compact design (AF19) with process connection G 1/4 male
Fast reaction: 2 milliseconds response time
Measuring accuracy < ± 0.8 %, repeatability < ± 0.05 %
Easy connection via DEUTSCH,AMP or M12 connector
Robust low-cost solution with welded stainless steel housing
Miniaturisation for mobile applicationsThe connectors of the new PT/PU pressure sensors allow fast and easy installation in mobile machines.The sensors also feature a thin-film measuring cell directly welded with theprocess connection. This technology guarantees high accuracy in a very compact housing withonly 19 mm across flats at a cost-optimised price/performance ratio.
ApplicationsThe PT/PU type sensors are suited for mobile applications and especially for hydraulic and pneumatic applications with high operating pressure.The high vibration and shock resistance, the high protection rating, the excellent EMC resistance and the E1 conformity make the PT/PU sensorsparticularly suitable for use in mobile machines.
67
(04.2016)
For further technical details please visit: www.ifm.com
Accessories
Type Description Orderno.
Operating voltage PT [V DC] PU [V DC]
8...3216...32
Common technical data
Medium temperature [°C] -40...125
Materials wetted parts
1.4542 (17-4 PH / 630),characteristics similar to
stainless steel (e.g. 304/1.4301)
but higher strength
Protection IP 67 / IP 69K
Step response time [ms] 2
Restrictor •
EMC
Compliant with UN-ECE10Rev. 4
ISO 11452: 100 V/mEN61326
Reverse polarity protection •
Adapters; G 1/4 - G 1/2, high-grade stainless steel (316Ti/1.4571) E30135
Accuracy / deviation(in % of the span)Linearity errorLinearityHysteresisRepeatabilityLong-term stabilityTemperature coefficients (TEMPCO)in the temperature range 0 ... 80 °C(in % of the span per 10 K)TEMPCO of zeroTEMPCO of the spanTemperature coefficients (TEMPCO)in the temperature ranges -40...0 °C and 80...125 °C(in % of the span per 10 K)TEMPCO of zeroTEMPCO of the span
< ± 0.8< ± 0.25 BFSL / < ± 0.5 LS
< ± 0.2< ± 0.05< ± 0.1
< ± 0.1< ± 0.1
< ± 0.2< ± 0.2
Wiring diagram
Dimensions
12
6652
M12 x119
G1 4/19
1
Example: type PT55
1) HNBR seal / DIN 3869
PU5704
PU5703
PU5702
PU5701
PU5700
PU5760
PU5604
PU5603
PU5602
PU5601
PU5600
PU5660
Measuring rangerelative pressure
[bar]
Poverloadmax.[bar]
Pburstmin.[bar]
Output function 4…20 mA,
0...10 25 300
0...25 65 600
0...100 250 1000 PT5702
0...250 625 1200 PT5701
0...400 1000 1700 PT5700
0...600 1500 2400 PT5760
Output function 0...10 V
0...10 300
0...25 600
0...100 1000
PT5602
0...250 1200
PT5601
0...400 1700
PT5600
0...600 2400
PT5660
PT5502
PT5501
PT5500
PT5560
25
65
250
625
1000
1500
Orderno.
PT5504
M12 connector
PT5503
Orderno.
PT5604
AMP connector
PT5603
Orderno.
PT5704
DEUTSCH connector
M12 connector AMP connector DEUTSCH connector
PT5703
L+BN1
WH2 OUT
Type PT55
1
2
3OUT
L +
L -
Type PU56
A
B OUT
+L A
C
BOUT
L -
L +L +
Type PU57Type PT57
1
3 L +
OUT
Type PT56
–
–
–
–
–
–
68
Process sensors
New PT absolutepressure transmitterwith different measuring rangesPressure sensors
Measuring range 0...1/1.6/4/10 bar absolute and analogueoutput 4...20 mA
Robust stainless steel measuring cell
Slim, compact design with G 1/4 process connection
Measuring accuracy ≤ 1 %, repeatability ≤ 0.1 %
Easy connection via M12 connector
Absolute pressure sensorsAs of now, ifm has added absolute pressure sensors to its versatile portfolioin the pressure sensor range. The new PT05 series with robust metal measuring cell, G 1/4 process connection, M12 connector and analogueoutput is available in the common pressure ranges up to 10 bar.
Operating principleAbsolute pressure sensors operate independently of the surrounding airpressure; that is what distinguishes them from sensors working on a relative measurement principle. The measurement is not influenced by weather-and altitude-related fluctuations of air pressure. This is often a decisive factor in vacuum applications, which require a fine pressure control.Absolute pressure sensors do not require ventilation, therefore incorrectmeasurement due to a blocked exhaust is impossible.In the field of pressure sensors the new units stand out as specialists for”specific duties“.
69
(04.2016)
For further technical details please visit: www.ifm.com
Accessories
Type Description Order no.
Operating voltage [V DC] 8...30
Common technical data
Medium temperature [°C] 0...80
Materials (wetted parts)NBR,
high-grade stainless steel(316L/1.4404)
Protection IP 67
Step response time [ms] 4
Reverse polarity protection •
Adapter; G 1/4 - G 1/2, high-grade stainless steel (316Ti/1.4571) E30135
Measuring range
[bar]
Poverloadmax.[bar]
Pburstmin.[bar]
Order no.
Output function 4...20 mA
0...1 5 PT0507
0...1.6 10 PT0517
0...4 25 PT0505
0...10 50 PT0504
Accuracy / deviation(in % of the span)Linearity errorLinearityRepeatabilityTemperature error in the temperature range 0...80 °C
< ± 1.0< ± 0.5 BFSL / < ± 1.0 LS
< ± 0.1< ± 2.5 %
Connection technology
Type Description Order no.
M12 socket,2 m black, PUR cable EVC001
M12 socket,5 m black, PUR cable EVC002
M12 socket,2 m black, PUR cable EVC004
M12 socket,5 m black, PUR cable EVC005
L+BN1
WH2 OUT
Wiring diagram
Dimensions
1447 58
,8G¼
29M12 x1
27
1
1) Sealing
2
3.2
8
20
70
Process sensors
Two IO-Link displays: process values at aglance
IO-Link display
Plug & play process value display for ifm IO-Link sensors
Display for freely defined texts, measured values and messages
Up to four process values /texts with unit and description
Two clearly visible LEDs
Easy integration into each IO-Link structure
More plant transparencyThe two IO-Link displays are a flexible solution to display process conditionsand messages in plant modules or small plants.
Integration and functionThe E30391 IO-Link display is controlled by a PLC via IO-Link. It displays process values, freely defined texts, messages, and QR codes. Clear text and a colour change of text and background guarantee a quick overview. By means of buttons the user can trigger control actions of the PLC or acknowledge messages.The E30430 IO-Link inline display is installed between sensor and IO-Linkmaster. It receives process values directly from the sensor. No PLC program-ming is required. It displays up to four process values and two switchingstates. For ifm units operated in the IO-Link mode, it is a plug & play solution. Alternatively, texts and settings can be predetermined via an IO-Link devicetool such as LR DEVICE.
71
(04.2017)
For further technical details please visit: www.ifm.com
Resolution pixels
Display type Displayillumination
Orderno.
Dimensions
Technical data
IO-Link displays
Operating voltage [V DC] 18...30
Current consumption [mA] < 47
Protection rating / protection class
IP 65, IP 67 / III
Reverse polarity protection •
Ambient temperature [°C] 0...60
EMC EN 61000-6-2 EN 61000-6-4
Shock resistance [g] 20 (11 ms)
Vibration resistance [g] 20 (10...50 Hz)
Housing materials
Stainless steel (303/1.4305); PC; PBT-GF 30;
PPS; PA 6.6; FKM
Connection M12 connector
Communication interfaceIO-Link deviceType of transmissionIO-Link revisionSDCI standard
COM2 (38.4 kbaud)1.1
IEC 61131-9
Connection technology
Type Description Orderno.
M12 jumper1 m black, PUR cable EVC042
M12 jumper2 m black, PUR cable EVC043
M12 jumper, 3 m black, PUR cable EVC102
M12 jumper, 5 m black, PUR cable EVC044
M12 jumper, 10 m black, PUR cable EVC493
45 34
86
101
39,5
11M
12x1
Accessories
Type Description Orderno.
DIN rail clip,PA; 1.4567 (V2A) E30429
Wiring
BN1
BK4
BU3
L+
L
OUT
E30391
BN
WH
BK
BU
4
1
3
2 OUT2
L+
L
OUT1
E30430
T splitterM12 plug / 2 x M12 socket E12481
IO-Link display, connection to master
128 x 128 1,44" TFT LED E30391
IO-Link display, connection between master and sensor (incl. T splitter)
128 x 128 1,44" TFT LED E30430
72
Process sensors
Calorimetric flowmeter for liquids and gases
Flow sensors / flow meters
Optimised for water, oils, glycol and air
Fast response time and integrated temperature measurement
Red/green colour change forprocess values
Internal pipe diameter selectable from 15...400 mm
The process connection can berotated for optimum alignment
Measurement techniqueThe SA volumetric flow sensor operates using the calorimetric measuringprinciple. Measuring elements as well as a heat source are located on themeasuring tip. The physical effect that a flowing medium absorbs heatenergy and conducts it away is used. The resulting temperature change isan indication of flow.
Device functionThe new SA-type sensor has been designed to detect and measure flowand temperature even in large internal pipe diameters up to 400 mm.A serial number on the device enables unambiguous traceability.Therefore it serves different applications. Switching outputs, analogue signals and IO-Link provide various options to further process the signals.That means that the user is best-equipped for Industry 4.0.
73
(04.2017)
For further technical details please visit: www.ifm.com
Common technical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 100
Current rating [mA] 250
Housing materials
High grade stainless steel (1.4404/316L);
PBT-GF 20; PBT-GF 30
Connection M12 connector
Accuracy temperature measurement ± 0.3 K
TypeSA
Protection rating, protection class IP 65 / IP 67, III
BN
WH
BK
BU
4
1
3
2 OUT2
L+
L
OUT1
Wiring
Measuring rangeliquid / gaseous
[cm/s]
Mediumtemperature
[°C]
Response time[s]
Orderno.
Output signal: switching signal; analogue signal; frequency signal; IO-Link; (configurable)
5...300 / 200...10000 -20...90 0.5 SA5000
Probe length
[mm]
45
5...300 / 200...10000 -20...100 0.5 SA4100100
5...300 / 200...10000 -20...100 0.5 SA4300200
Pressure resistance
[bar]
100
50
50
Type
M18
Progressive ring
Progressive ring
Connection technology
Type Description Orderno.
M12 socket,2 m black, PUR cable EVC001
M12 socket,5 m black, PUR cable EVC002
M12 socket,2 m black, PUR cable EVC004
M12 socket,5 m black, PUR cable EVC005
M12 socket,2 m orange, PVC cable EVT064
M12 socket,5 m orange, PVC cable EVT001
Accuracy flow measurement
± (7 % MW + 2 % VMR) at referenceconditions
Accessories
Type Description Orderno.
Progressive ring fitting G 1/2, flat seal E40258
Progressive ring fitting G 1/4, flat seal E40259
Progressive ring fitting G 3/4, flat seal E40260
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
Progressive ring fitting 1/2 NPT E40261
Progressive ring fitting 1/4 NPT E40262
Progressive ring fitting R 1/2 E40263
Progressive ring fitting R 1/4 E40264
Progressive ring fitting for SL mounting adapter E40269
Protective cover for fluid sensors with M12 connector,polypropylene homopolymer
E30420
Welding adapter for cutting ring E40265
Flow adapter E40434
Progressive ring fitting G 1/2, metal to metal seal E40267
Progressive ring fitting G 3/4 metal to metal seal E40268
Mounting clamp for progressive ring fitting E40269 E40048
Output function 2 x analogue output 4...20 mA; (scalable)
5...300 / 200...10000 -20...90 0.5 SA200419.2
5...300 / 200...10000 -20...90 0.5 SA500445
5...300 / 200...10000 -20...100 0.5 SA4104100
100
100
50
G 1/2
M18
Progressive ring
5...300 / 200...10000 -20...100 0.5 SA430420050Progressive ring
5...300 / 200...10000 -20...90 0,5 SA200019.2100G 1/2
74
Process sensors
Maintenance-freelevel detection whereother systems fail
Level sensors
Most reliable deposit suppression on the market
Flexible installation independent of the orientation
Shock and vibration resistant ina robust stainless steel housing
Factory set for simple plug & play
Differentiation of media byswitch point setting
Level under controlThe LMC family reliably monitors levels, e.g. in machine tools or wastewater management, or protects pumps from running dry. The option of a threadat the back permits variable installation depths and application-specific installation.
Versatile sensor for all mediaThe LMC sensor can be set to almost any liquid or viscous medium as wellas to bulk materials. Permanent medium temperatures up to 100 °C or aheavy build-up are no problem. The differentiation between two media is possible due to the two switchingoutputs which can be set independently. The parameters can be set withIO-Link and USB interface accessory E30396.
75
(04.2017)
For further technical details please visit: www.ifm.com
Dimensions
IO-Link interface for parameter settingand analysis of units with DTM specification, current consumptionfrom USB port: max. 500 mA
E30396
Memory plug, parameter memoryfor IO-Link sensors E30398
Jumper cable M12 plug / M12 socket, 0.3 m black, PUR cable
E12432
Connection technology
Type Description Orderno.
Welding adapter, G 1/2,Ø 26.4 mm E43375
Accessories
Type Description Orderno.
Flat seal, 26.5 x 21.3 x 1.5 mm E43376
Process connection Probe length
[mm]
Feature Order no.
Applications: water, hydrous media/oils, oil-based mediaM12 connector · output function NO/NC complementary
Mediumtemperature
[°C]
G 1/2 12 – -25...100 LMC110
G 1/2 21 Thread at the back -25...100 LMC410
1/2 NPT 34 – -25...100 LMC510
1/2 NPT 40 – -25...85 –
Order no.
LMC100
LMC400
LMC500
LMC502
Housing materialsStainless steel
(1.4404 / 316L), PEEK; PEI, FKM
Materials in contactwith the medium
Stainless steel(1.4404 / 316L),
PEEK (FPM only LMC502)
Shock resistance [g] 50
Protection IP 68, IP 69K / III
Vibration resistance [g] 20
Ambient temperature [°C] -25...85
EMCclosed tanks:open tanks:
EN 6100-6-2:2005EN 6100-6-3:2006EN 6100-6-4:2006
Operating voltage [V] 18...30 DC
Current rating [mA] 100
Further technical data
Water Oil
Socket, M12, 4-pole, 2 m black, PUR cable EVC001
Socket, M12, 4-pole, 5 m black, PUR cable EVC002
Socket, M12, 4-pole, 2 m black, PUR cable EVC004
Socket, M12, 4-pole, 5 m black, PUR cable EVC005
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors andactuators
QA0011
24
91,276,2
37,528
9,6
18,1
M12
X1
G1/
2
LED 1
LMC100
91,276,2
20,89,6
24LED 1
18,1
M12
X1
G1/2
LMC400
91,276,2
42,99,6
18,1
M12
X1
16,6
LED 1/2''-14 NPT22
LMC500
M12
X1
30 14
27
127111,9
53
NPT21
31,6
32
LED
LMC502
1) tightening torque 50 Nm
1) Sealing
76
Process sensors
Two temperaturesensors in one
Temperature sensors
Two in one: process values plus two switched outputs
Measuring range -50...150 °C
IO-Link for simple, remote setting
Extremely high accuracy of +/- 0.3 K
Tamper-proof
Flexible in useThe functionality of the temperature sensor TV is impressive. Due to its extremely compact design the TV sensor can be installed where space is ata premium. The device has two switch points, operates with an extremelyhigh precision and can be set easily and quickly via the LR DEVICE.
Efficient and reliable thanks to IO-LinkThanks to IO-Link the new temperature sensor continuously transmits process values and other important data, e.g. min. / max. temperature. Moreover, the digital measurement results are more accurate because thereare no conversion losses by D/A converters or external influences (e.g. cablelengths). Devices with preset measuring ranges (analogue start and endpoints) are no longer needed because the real process value is transmitted.This reduces stock. Soon conventional transmitters will be a thing of the past.
77
(11.2016)
For further technical details please visit: www.ifm.com
IO-Link interface for parameter settingand analysis of units with DTM specification, current consumptionfrom USB port: max. 500 mA
E30396
Memory plug, parameter memoryfor IO-Link sensors E30398
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
IO-Link accessories
Type Description Orderno.
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Operating voltage [V DC] 18...32
Protection ratingprotection class
IP 69K,lll
Materials wetted parts high-grade stainless steel(316L/1.4404)
Further technical data
Reverse polarity / overload protection • / •
Dynamic response T05 / T09 1 s / 3 s
Accuracy [K] ± 0.3
Measuring range [°C] -50...150
Ambient temperature [°C] -25...80
IO-Link revision 1.1
Dimensions
Wiring diagram
Example TV7105
Example TV7603
Installationlength[mm]
Orderno.
Pressure rating
[bar]
Output function 2 x NO / NC programmable, measuring range -50...150 °C
25 400
30 300
25 400
30
Processconnection
G 1/4
G 1/2
1/4" NPT
1/2" NPT 300
TV7105
TV7405
TV7603
TV7303
Example TV7105
6
M12
x118
,7
15,9 48
19
13
G ¼
25
BN
WH
BK
BU
4
1
3
2 OUT2
L+
L
OUT1
6
M12
x118
,7
15,9 4871
19 ¼" NPT
25
78
Process sensors
Temperature sensorwith easy dial setting
Temperature sensors
Measuring range -25...140 °C
Two switching outputs
Easy adjustment via two settingrings for optimum read-out
Mechanical lock to prevent accidental adjustment
Accuracy: ± 3 K
Convenient and reliable settingThe TK type temperature sensors are sensors to monitor liquids and gaseswith switch points that can be set intuitively via two radial setting rings.Wherever simple solutions are needed, the TK series sensors are a real alternative. Complicated parameter setting via software is not necessary.The requested temperature is set via the setting rings allowing optimumread-out without your installation having to be in operation. In addition,the switching states are clearly displayed via LEDs.
VersionsThe sensors are available with a setpoint and a reset point (TK6xxx) or two switch points with a fixed hysteresis (TK7xxx). The TK series temperature sensors are always the optimum choice for quick and simple use.
79
(11.2016)
For further technical details please visit: www.ifm.com
Dimensions
M12
x127
6
G ¼
5950
12
27LED
Example TK6110
Dynamic response T05 / T09 [s] 1 / 3
AccuracySetting accuracy [K]Temperature influence (per 10 K)Repeatability [K]
± 30.1
± 0.1
Ambient temperature [°C] -40...70
Shock resistance 50 g
Vibration resistance 20 g
Housing materials
high-grade stainless steel(316L/1.4404), PC (Makrolon),
PBT (Pocan), FPM (Viton)
Materials wetted partshigh-grade stainless steel
(316L/1.4404), FPM (Viton)
Connection M12 connector
Protection rating, protection class IP 67 / III
Operating voltage [V DC] 9.6...32
Current rating [mA] 500
Further technical data
Measuring range
[°C / °F]
Orderno.
M12 connector, gold-plated contacts · output function normally open / normally closed complementary
TK6110-25…140 / -13...284
Process connection
G 1/4
Installation length
[mm]
50
Switching hysteresis
[K]
adjustable
Pressure rating
[bar]
400
TK6310-25…140 / -13...284 1/4 NPT 50 adjustable 400
M12 connector, gold-plated contacts · output function 2 x normally open
TK7110-25…140 / -13...284 G 1/4 50 5 (fixed) 400
M12 connector, gold-plated contacts · output function 1 x normally open / 1 x normally closed
TK7460-25…140 / -13...284 G 1/2 250 5 (fixed) 300
Adapter, G 1/4 – G 1/2high-grade stainless steel (316Ti/1.4571)
E30135
Protective cover with lead seal option for TK type temperature sensors, PP transparent
E30094
Accessories
Type Description Orderno.
Flange adapter G1/4,stainless steel (303/1.4305) E30063
Thermowells
G 1/4 E377002750
Screw-in thermowell, process connection G 1/4
G 1/2 E37640224250
Screw-in thermowell, process connection G 1/2
Device connection Installation length [mm]
Sensor Thermowell
Orderno.
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Socket, M12,2 m black, PUR cable, LED EVC007
Socket, M12,5 m black, PUR cable, LED EVC008
80
Temperature sensors
TN sensor with integrated processconnection and eva-luation electronics
Measuring range of -50...150 °C, response time T05 / T09 = 1s / 3s.
Clearly indicates the acceptableranges: programmable red / green display
Integrated process connections: G 1/2, G 1/4, 1/2 NPT, 1/4 NPT,M18 x 1.5
2 switching outputs or 1 switching and 1 analogue output (4...20 mA or 0...10 V)
Visualisation of the switchingstates by clearly visible LEDs
Extremely fast, robust and flexibleThe compact TN type temperature sensors are distinguished by excellent response times, high pressure resistance and integrated process connections. The sensors easily resist applications with temperatures up to 150 °C andhigh pressure loads up to 400 bar. The measuring range is freely scalable.
Updating a classicWhat is new is the quick and easy handling via three pushbuttons. The display can be switched from the indication of ”red“ to an alternatingindication of “red - green“. So, switching states can be highlighted or an independent colour windowcan be created. The sensor head can be rotated and offers optimum readability from any position. Thanks to captive laser labelling on the stainless steel housing, the units can still be identified after years.
Process sensors
81
(04.2016)
For further technical details please visit: www.ifm.com
Adapter, M18 x 1.5 - G 1/2High-grade stainless steel (316L/1.4404) E40096
Protective cover for fluid sensors with M12 connector,polypropylene homopolymer
E30420
Accessories
Type Description Orderno.
Accuracy [K] ± 0.3 + (± 0.1 % MS)
Electrical design PNP / NPN
Protection IP 67
Communication interface IO-Link
Resolution display [K] 0.1
Operating voltage [V] 18...32 DC
Current rating [mA] 250
Further technical data
IO-Link interface for parameter settingand analysis of units with DTM specification, current consumptionfrom USB port: max. 500 mA
E30396
Memory plug, parameter memoryfor IO-Link sensors E30398
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
IO-Link accessories
Type Description Orderno.
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
1) LEDs (display unit / switching status), 2) 4-digit alphanumeric display / alternating indication of red and green, 3) Programming buttons, 4) Upper part of the housing can be rotated by 345°
Installation length
[mm]
Pressure resistance
[bar]
300 45
Measuring range
[°C]
Factory setting
[°C]
Orderno.
Output function 1 x NO / NC programmable · 1 x analogue output 4…20 mA or 0…10 V programmable
-50...150 -40...150
Process connection
M18 x 1.5 I TN2511
300 45
Output function 2 x NO / NC programmable
-50...150 -40...150M18 x 1.5 I TN7511
300 30 -50...150G 1/2 TN2405
300 50 -50...150G 1/2 TN2415
160 100 -50...150G 1/2 TN2435
160 150 -50...150G 1/2 TN2445
300 30 -50...1501/2" NPT TN2303
300 50 -50...1501/2" NPT TN2313
160 100 -50...1501/2" NPT TN2333
160 150 -50...1501/2" NPT TN2343
400 25 -50...150G 1/4 TN2105
400 50 -50...150G 1/4 TN2115
400 25 -50...1501/4" NPT TN2603
400 50 -50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...1501/4" NPT TN2613
Output function 2 x NO / NC programmable or 1 x NO / NC + 1 x analogue (4...20 mA / 0...10 V; scalable)
Response dynamics T05 / T09 [s] 1 / 3
Thermowell for temperature sensors,Ø 6 mm,high-grade stainless steel (316L/1.4404)
E37610
Dimensions
48
M12
x1
22 EL
11
41
34
8012
1
4
3
2
1
G ¼
6
Example 2105
82
Industrial communication
DataLine SmartPLC :flexible automationsystem
AS-Interface controllers / gateways
Quick and easy set-up
Flexible and future-proofthanks to connective hardwareand CODESYS V3
Various protocols on differentinterfaces
Designed for Industry 4.0 applications
Unbeatable price / performanceratio
Communicative PLCThe DataLine SmartPLC is freely programmable via CODESYS V3 and offers full access to all interfaces of the system. Two Ethernet ports act as fieldbus / slave interface (PROFINET, EtherNet/IP, EtherCAT) and enable high-performance communication to other PLC systems. Different com-munication protocols can be used in parallel via two further Ethernet ports,e.g. EtherCAT master, EtherNet/IP scanner, Modbus TCP master and slave,TCP/IP, UDP/IP or OPC/UA server.
Designed for Industry 4.0The DataLine SmartPLC is best-equipped for Industry 4.0 applications. Towards the PLC, it acts like a classic AS-i gateway and towards IT, any pro-cess values can be made available via different communication protocols.An integrated real-time clock and an SD card slot complete the features.
83
(04.2017)
For further technical details please visit: www.ifm.com
Products
Orderno.
PROFINET device interface1 AS-i master with M4 profile AC1403
PROFINET device interface2 AS-i masters with M4 profile AC1404
EtherNet/IP device interface1 AS-i master with M4 profile AC1423
EtherNet/IP device interface2 AS-i masters with M4 profile AC1424
EtherCat slave interface1 AS-i master with M4 profile AC1433
EtherCat slave interface2 AS-i masters with M4 profile AC1434
Dimensions
106,293
135,
512
8,2
Example AC1433
Type Description
DataLine SmartPLC
Advantages and customer benefits
Communication interfaces:EtherNet/IP:Certified EtherNet/IP functionalityEthernet switch with 2 integrated ports
PROFINET:PROFINET class BPROFINET switch with 2 integrated ports
EtherCAT:Certified EtherCAT functionality
AS-Interface:1 and 2 AS-i masters pursuant to M4 profile
Configuration interface: 2 Ethernet ports with the following functions:– Web server– CODESYS V3 programming interface– Multifunctional communication interface (EtherCAT master, Modbus TCP, EtherNet/IP scanner, OPC/UA server, Web visualisation)
Connections:– AS-i and auxiliary supply: plug-in terminals (supplied with the unit)– EtherNet/IP and Profinet 2 x RJ45– Configuration interface 2x RJ45
FunctionsThe DataLine SmartPLC supports a number of differentcommunication protocols via its both configuration interfaces in order to supply additional input / outputdata to the integrated PLC or realise a data exchangewith other units / systems. For Industry 4.0 applications, there is, amongst others,an OPC server functionality available that enables aneasy data transfer into your IT world.
84
Industrial communication
SafeLine SmartPLC:fail-safe automationsystem
AS-Interface Safety at Work
Quick and easy set-up
Flexible and future-proofthanks to connective hardwareand CODESYS V3
High machine uptime due to sophisticated diagnostics
Safe up to SIL 3, PL e
Unbeatable price / performance ratio
All-in-one: more than just a PLCJust as a smartphone is more than just a phone, the new SmartPLC is morethan just a simple PLC. It has the flexibility for different tasks, even in safety-related applications up to SIL 3, PL e. For example as:– fail-safe PLC– standard PLC– AS-i gateway– visualisation system– protocol converter– data logger– intelligent evaluation unit (ifm system solutions)Two integrated PLCs (1 x fail-safe, 1 x standard), powerful processors, alarge memory and a multitude of supported protocols allow the control ofsophisticated systems – and this at an unbeatable price!
85
(11.2016)
Products
Orderno.
SmartSPS SafeLine, 2 x AS-i, Profinet-Device AC402S
SmartSPS SafeLine, 2 x AS-i, Profibus-Slave AC412S
SmartSPS SafeLine, 2 x AS-i, EtherNet/IP-Device AC422S
Dimensions
106,293
135,
512
8,2
Type Description
SmartSPS SafeLine
Accessories
Orderno.
AS-i data decoupling module AC1250
Type Description
Safe PLCCertified up to SIL3, PL e. Eight safe local inputs andfour safe local outputs. Convenient diagnostic functions, include status indication for safe I/Os and error memorywith time stamp for up to 2,000 messages.Programming is done via CODESYS V3. The auto-teachfunction simplifies the replacement of slaves.
Standard PLCThe PLC can be freely programmed using CODESYS V3.Its software and hardware operates independently ofthe fail-safe PLC, but it can of course communicatewith it and exchange data. The PLC has access to all interfaces of the system.
AS-i gatewayWithout programming, the SmartPLC can be used directly as a gateway for AS-i on the one side, and Profinet, Profibus, or EtherNet/IP on the other side. Theintegrated display and the convenient web interfacedisplay all the available status information for the userand support diagnostics in case of a fault.
Data loggerOperational system data can be recorded via AS-i, Modbus TCP, Profinet, EtherNet/IP, Profibus, TCP/IP,UDP/IP and stored on the SD card or in the internalflash memory. If needed, the integrated real-time clock provides atime stamp for each recorded data block. This simplifiesthe documentation and diagnostics of processes.
Visualisation systemA freely programmable web visualisation based onHTML5 provides maximum transparency. An internetbrowser with HTML5 capability is sufficient on the finalunit (PC, tablet, smartphone). No further software is required. Even the full graphic display of the SmartPLCis freely programmable for visualisation tasks.
Protocol converterConnect your sensors and Ethernet based devices toyour fieldbus: The SmartPLC can be used as protocolconverter between Profinet, Profibus, EtherNet/IP onthe one side and AS-i, Modbus TCP, TCP/IP, UDP/IP onthe other side.
All-in-oneThe new SmartPLC combines two separate PLCs in one compact housing. While the one PLC solves safety-related applications, the second PLC either works as astandard PLC or as platform for other tasks. Both PLCs communicate with each other, so that entireplant controls can be implemented including safetyfunctions and visualisations with only one SmartPLC.
For further technical details please visit: www.ifm.com
86
Industrial communication
AS-i Safety at Workmodule with twosafe inputs at oneaddressAS-Interface Safety at Work
2 safe digital inputs and 2 standard outputs
Connection of 2 safe inductivesensors with OSSD outputs orlight grids using only one As-iaddress
Certification to EN 62061 / SIL2and EN ISO 13849-1 / PL d
Precise and flexible quickmounting
The module is directly suppliedfrom AS-Interface
Safe ClassicLine moduleThe safe input module allows safety-related components without integrated AS-Interface to be connected to the AS-i Safety at Work system.
For components without AS-InterfaceSo, 2-channel inductive sensors with electronic OSSD outputs (e.g. GG712S) or light grids up to performance level d to EN 13849-1 can be connected toa single AS-i address using a 4-wire standard connection cable.Two integrated outputs ensure the connection of two actuators, such as signal lamps or relays.The safe sensors and the outputs are completely powered by AS-i.
87
(04.2017)
For further technical details please visit: www.ifm.com
Products
2 safe 2-channel inputs, 2 LED outputs and 2 transistor outputs
AC509S
Total current consumption [mA] ≤ 280
Safe inputs 2 x 2
Sensor supply [V DC]Inputs / outputs via AS-i
Current rating [mA] 200
AS-i profile S-7.B.E
AS-i specification 2.11 + 3.0
Extended addressing mode –
Ambient temperature [°C] -25...55
Protection IP 67
Dimensions (H x W x D) [mm] 103 x 45 x 45
Safe AS-i input module AC509S
Technical data
Safe AS-i input module
Dimensions
45
103
40,244,7
25,8
Operating voltage [V DC] 26.5...31.6
Accessories
Orderno.
Short-circuit bridging plug for unused safe inputs E7008S
Type Description
Advantages and customer benefitsSafe sensors with a current consumption below 200 mA can be operated on AC509S without auxiliary voltage.Connection is only made via the yellow AS-i flat cable.
AS-i quick connectionThe quick-connection technology provides a high degree of installation reliability and flexibility. The AS-i flatcable can be inserted from three different directions.
On-site diagnosisLEDs indicate the status of the inputs and outputs andthe communication.
SafetyThe safe AS-i module AC509S detects safety-relatedswitching states of two electronic contacts with twoself-testing semiconductor outputs (OSSD) each.The module meets the requirements up to SIL2 according to EN 62061 and PL d to EN 13849-1. In the event of a fault, the integrated communication monitoring switches the signal outputs off.
SetupThe modules can be addressed either without voltagebefore mounting or when mounted and wired via theaddressing socket. Only the AC1154 addressing unitplus the E70213 addressing cable are required.
Orderno.
Type Description
88
IO-Link
IO-Link master: connection for intelligent sensors
IO-Link masterStandardLine Coolant
4 or 8 IO-Link ports with fullV1.1 functionality
Profinet or EtherNet/IP
Master and devices configurable via the LR DEVICE software
Industry 4.0 ready via LR AGENT EMBEDDED
Voltage supply via standardM12 sensor cable, A-coded
Robust field bus modules with safe connectionThe decentralised IO-Link master modules are used as gateways betweenintelligent IO-Link sensors and the fieldbus. They are the perfect choice,even in the most difficult environments: The materials and production methods are identical to the ifm jumper cables of the tried-and-tested EVCproduct series. The ecolink technology guarantees reliable, permanently ingress-resistant M12 connections of the connection cables.
Energy limitation for UL class 2 unitsMany sensors require an energy-limited supply with UL class 2 approval.The limitation of energy is usually achieved via a corresponding power supply. With the AL series IO-Link master, sensors can be supplied according to UL class 2 without using an energy-limited power supply approved to UL class 2.
89
(04.2017)
For further technical details please visit: www.ifm.com
Advantages and customer benefits
• Sensor configuration with LR DEVICE
The intuitive software finds all IO-Link masters in thenetwork and creates an overview of the whole plant.Besides, all sensors connected are indicated with therespective parameters. This means that parametersetting of all sensors in the system is possible fromone central point.
• Easy sensor connectionThe sensors and actuators are connected via standardM12 connection cables without screening. Depending on the device type, up to 4 or 8 IO-Link sensors canbe connected and supplied with up to 3.6 A. With the EVC693 accessories, additional auxiliarypower for the connection of IO-Link actuators can be supplied. The cable can be up to 20 m long.
• Reliable digital dataThe sensor data is transferred digitally. Unlike analogue signals, contact resistance and EMC interference cannot corrupt the signals.
• Direct connection to the ITThe integrated LR AGENT EMBEDDED is capable of transmitting the process values directly to ERP systems, without detour via the PLC. This second communication path is available in parallel to the fieldbus via the bus wiring.
Total current consumption [A] ≤ 3.9
IO-Link version 1.1
Number of IO-Link ports 4 A ports 8 A ports
Number of binary inputs(IO-Link in SIO mode) 4 + 4
Number of binary inputs(IO-Link in SIO mode) 4
8 + 8
8
Parameter memory •
Current for all ports [A](device supply) ≤ 3.6
Protection IP 65, IP 67
Ambient temperature [°C] -25...60
Housing materialspolyamide;
socket: nickel-plated brass
IO-Link master StandardLine Coolant
Technical data
Operating voltage [V DC] 20...30
Connection technology
Products
Profinet 4-port AL1100
EtherNet/IP 4-port AL1120
IO-Link master StandardLine Coolant
Accessories
Orderno.
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors andactuators
QA0011
Type Description
Y splitter, for connection of two sensors to a port,M12 connector / 2x M12 socket
EBC113
Protective caps M12 (10 pcs) E73004
Orderno.
Type Description
Profinet 8-port AL1102
EtherNet/IP 8-port AL1122
Input module 4 x 2DI AL2400
input module 8 x 2DI AL2401
Output module 6 x 2DO AL2330
IO-Link module Coolant
Orderno.
0.5 m E12490
2 m E12090
5 m E12491
10 m E12492
Type Description
Ethernet cable (fieldbus)
2 m EVC706
5 m EVC707
10 m EVC708
20 m EVC709
M12 socket 1 mm2 (power)
1 m EVC042
2 m EVC043
5 m EVC044
10 m EVC493
M12 connection cable 0.34 mm2 (sensor)
Order no.
AL1102AL1122
AL1100AL1120
90
IO-Link
IO-Link master for intelligent sensors inhygienic areas
IO-Link masterStandardLine Food
4 or 8 IO-Link ports with fullV1.1 functionality
IP 69K field module for the food industry
Master and devices configurable via the LR DEVICE software
Industry 4.0 ready via LR AGENT EMBEDDED
Voltage supply via standardM12 sensor cable, A-coded
Robust field bus modules for demanding applicationsThe decentralised IO-Link masters are used as gateways between intelligentIO-Link sensors and the fieldbus. Thanks to their special housing materialsand high ingress resistance (IP 69K), they can be used directly in wet areasin the food industry. The materials and production methods are identical tothe ifm jumper cables of the tried-and-tested EVF product series. The ecolink technology guarantees reliable, permanently ingress-resistantM12 connections of the connection cables.High-quality materials especially suited to the application and intensive monitoring during and after production guarantee maximum quality standards.
91
(04.2017)
For further technical details please visit: www.ifm.com
Advantages and customer benefits
• Configuration of sensors with LR DEVICE
The intuitive software finds all IO-Link masters in thenetwork and creates an overview of the whole plant.Besides, all sensors connected are indicated with therespective parameters. This means that parameter setting of all sensors in the system is possible fromone central point.
• Use as masters for the food industryThese masters can now also be used in hygienic applications due to the materials used and their innovative housing design.
• Easy sensor connectionThe sensors and actuators are connected via standardM12 connection cables without screening. Dependingon the device type, up to 4 or 8 IO-Link sensors canbe connected and supplied with up to 3.6 A. The cable can be up to 20 m long.
• Reliable digital dataThe sensor data is transferred digitally. Unlike analogue signals, contact resistance and EMC interference can-not corrupt the signals.
• Direct connection to the ITThe integrated LR AGENT EMBEDDED is capable of transmitting the process values directly to ERP systems, without detour via the PLC. This second communication path is available in parallel to thefieldbus via the bus wiring.
Total current consumption [A] ≤ 3.9
IO-Link version 1.1
Number of IO-Link ports 4 A ports 8 A ports
Number of binary inputs(IO-Link in SIO mode) 4 + 4
Number of binary inputs(IO-Link in SIO mode) 4
8 + 8
8
Parameter memory •
Current for all ports [A](device supply) ≤ 3.6
Protection IP 65, IP 67, IP 69K
Ambient temperature [°C] -25...60
Housing materialspolyamide;
socket: stainless steel
IO-Link master StandardLine Food
Technical data
Operating voltage [V DC] 20...30
Connection technology
Products
Profinet 4-port AL1101
EtherNet/IP 4-port AL1121
IO-Link master StandardLine Food
Accessories
Orderno.
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors andactuators
QA0011
Type Description
Protective caps M12 4 pcs., stainl. st. E12542
Orderno.
Type Description
Profinet 8-port AL1103
EtherNet/IP 8-port AL1123
Output module 6 x 2DO AL2230
IO-Link-Module Food
Orderno.
1 m EVF530
2 m EVF531
5 m EVF532
10 m EVF533
Type Description
Ethernet cable (fieldbus)
M12 socket 1 mm2 (power)
M12 connection cable 0.34 mm2 (sensor)
Order no.
AL1103AL1123
AL1101AL1121
2 m EVF480
5 m EVF481
10 m EVF482
20 m EVF483
1 m EVF042
2 m EVF043
5 m EVF044
10 m EVF045
Y splitter, for connection of two sensors to a port,M12 connector / 2x M12 socket
EBF006
92
IO-Link
IO-Link master withextra power
IO-Link masterPowerLine Coolant
4 or 8 IO-Link ports with fullV1.1 functionality
Feed-through of the power supply possible
Master and devices configurable via the LR DEVICE software
Industry 4.0 ready via LR AGENT EMBEDDED
Voltage supply via power cable,M12, T-coded
Robust field bus modules with safe connectionThe decentralised IO-Link masters are used as gateways between intelligentIO-Link sensors and the fieldbus. They are the perfect choice, even in themost difficult environments: The materials and production methods areidentical to the ifm jumper cables of the tried-and-tested EVC product series. The ecolink technology guarantees reliable, permanently ingress-resistant M12 connections of the connection cables.
Extra powerThe IO-Link masters are equipped with two T-coded M12 connections forvoltage supply. With this power cabling, the current path can simply bedaisy-chained. The B ports of the 8-port IO-Link master allow direct connection of IO-Linkactuators, such as valve islands.
93
(04.2017)
For further technical details please visit: www.ifm.com
Total current consumption US / UA [A] ≤ 3.9 / ≤ 3.6
IO-Link version 1.1
Number of IO-Link ports 4 A ports4 A ports
and 4 B ports
Number of binary inputs(IO-Link in SIO mode) 4 + 4
Number of binary inputs(IO-Link in SIO mode) 4
4 + 8
8
Parameter memory •
Current for all A ports [A](device supply) ≤ 3.6
Current for all B ports [A](actuator supply) ≤ 3.6
Protection IP 65, IP 67
Ambient temperature [°C] -25...60
Housing materialspolyamide;
socket: nickel-plated brass
IO-Link master PowerLine Coolant
Technical data
Operating voltage [V DC] 20...30
Products
Profinet 4-port AL1200
Profinet 8-port AL1202
IO-Link master PowerLine coolant
Orderno.
Type Description
EtherNet/IP 4-port AL1220
EtherNet/IP 8-port AL1222
IO-Link module Coolant
Order no.
AL1202AL1222
AL1200AL1220
Input module 4 x 2DI AL2400
Input module 8 x 2DI AL2401
Output module 6 x 2DO AL2330
Advantages and customer benefits
• Sensor configuration with LR DEVICEThe intuitive software finds all IO-Link masters in thenetwork and creates an overview of the whole plant.Besides, all sensors connected are indicated with therespective parameters. This means that parametersetting of all sensors in the system is possible fromone central point.
• Easy sensor connectionThe sensors and actuators are connected via standardM12 connection cables without screening. Depending on the device type, up to 4 or 8 IO-Linksensors can be connected and supplied with up to3.6 A. With the EVC693 accessories, additional auxiliary power for the connection of IO-Link actuators can be supplied. The cable can be up to 20 m long.
• Direct connection to the ITThe integrated LR AGENT EMBEDDED is capable of transmitting the process values directly to ERP systems, without detour via the PLC. This second communication path is available in parallel to the fieldbus via the bus wiring.
• 12 amperes on an M12 connectorThe master supply and the auxiliary power for the actuators are supplied via T-coded M12 connectors.The energy can be looped through the master (daisychain).
Connection technology
Accessories
Orderno.
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors andactuators
QA0011
Type Description
Protective caps M12 (10 pcs) E73004
Orderno.
0.5 m E12490
2 m E12090
5 m E12491
10 m E12492
Type Description
Ethernet cable (fieldbus)
0.5 m E12494
2 m E12430
5 m E12495
10 m E12496
M12 socket 1.5 mm2 (power)
1 m EVC042
2 m EVC043
5 m EVC044
10 EVC493
M12 connection cable 0.34 mm2 (sensor)
Y splitter, for connection of two sensors to a port,M12 connector / 2x M12 socket
EBC113
Y splitter
94
IO-Link
IO-Link device: actuator switchingvia IO-Link
IO-Link devices
Decentralised switching of digital outputs via IO-Link
Adds 12 digital outputs to anIO-Link master module
For use in industrial applications plus new variant for hygienicareas
Two electrically isolated and individually switchable voltagesupplies
Output current up to 1.8 A
Switching of decentralised outputs via IO-LinkThe new IO-Link output module provides an easy and cost-effective way to add powerful digital outputs to ifm’s IO-Link master module for field use.Typical tasks include decentralised switching of loads and actuators.
ApplicationsThe module is available in two designs: The orange field module of thecoolant series is resistant to oils and coolants and suited for general industrial applications.The grey module is ideally suited for hygienic and food applications due to the material used for the housing. It has the high protection rating IP 68 / IP 69K.
95
(04.2017)
For further technical details please visit: www.ifm.com
Dimensions
Powerful outputsThe unit features six M12 ports with two digital outputs each. The outputs have full overload and short-circuitprotection. They are supplied from two independent, electricallyisolated voltage sources. The three left-hand M12 sockets are supplied via pins 1 and 3 of the supply connector and the three right-hand M12 sockets viapins 2 and 4.Both voltage supplies can be loaded with max. 1.8 A.The output current is distributed to the outputs according to the connected loads and is limited to 1.8 A total current per channel.Thanks to the two separate voltage supplies, criticaloutputs can be switched off selectively by higher-levelswitching modules without affecting the outputs in theother electric circuit.In addition, IO-Link allows an in-depth fault analysis.
Connection technology
Description Order no.
Products
IO-Link device V1.1, separate voltage supply 2 x Uaux, M12 connector, O-ring, stainless steel thread, IP 68 / IP 69K
AL2230
Active IO-Link output module, 6 x 2 outputsHygienic and food applications
Accessories
Orderno.
IO-Link master with Profinet interface AL1100
Type Description
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
Orderno.
Description
IO-Link device V1.1, separate voltage supply 2 x Uaux, M12 connector, O-ring, nickel-plated brass thread, IP 67
AL2330
Active IO-Link output module, 6 x 2 outputsOils and coolants
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
M12/M12 jumper, 0.5 m PUR cable, 4 wires, 1 mm2, suitable for drag chains, halogen-free, silicone-free
EVC717
M12/M12 jumper, 2 m PUR cable, 4 wires, 1 mm2, suitable for drag chains, halogen-free, silicone-free
EVC719
LED
M12x1
26
3438
152
136
59,3
5,2
96
IO-Link
LR DEVICE Parameter settingsoftware via IO-LinkmasterIO-Link software
Easy and fast IO-Link masterparameter setting
Clear representation
Easy and fast deviceparameter setting (point-to-multipoint connection)
Transferable parameter sets
Features• Online and offline parameter setting • Supports all IO-Link devices• Software and parameter description in all supported languages• Detailed description texts of all parameter contents• Parameter sets grouped according to topics• Parameter setting of IO-Link master (AL11XX-series)• Supports the latest ifm IO-Link devices• Supports IO-Link actuators• Parameter setting of devices via networkCustomer benefits• Optimised by means of graphic visualisation of the process values• Shortened set-up time• Optimised device replacement process• Paperless recording of parameter sets
Automaticinstallation
ERPconnec-
tivity
Trace-ability
Point-to-multipointparameter
setting
97
(11.2016)
For further technical details please visit: www.ifm.com
Graphic representation of the process values• Graphic comparison of process values with each other and with switching outputs• Simple, clear representation of the process values• Export of the process values to the table
Documentation and archiving • Save / load parameter sets • Archive parameter sets as PDF file
Device detection• Automatic identification of IO-Link masters and the connected IO-Link sensors / actuators• Automatic identification of the ifm IO-Link sensors• Display of the characteristic sensor values• Save correct parameter transfer by recognising non-compatible devices• Particularly easy adding of new and updated IODD files
Features• Parameter setting of IO-Link masters and IO-Link devices via network• Simultaneous writing of parameters to multiple devices at the same time• Help texts and value limits support parameter entry at the input stage• Operational reliability by device detecton and restoration of default values• Display of the IO-Link communication quality• Create and display equipment identification (application-specific tag)• Add and update existing ifm IODDs with a mouse click *)*) if internet connection available
Further processing of the sensor values with thefreely scalable LINERECORDER modulesThe software framework LINERECORDER closes the in-formation circuit from the sensor signal to the world ofME systems and ERP solutions (e.g. SAP).
From sensor to ERP
Description Orderno.
Technical data
LR DEVICE(supplied on USB flash drive)Software for online and offline parameter settingof IO-Link sensors and actuators
QA0011
LR DEVICE(Download)Software for online and offline parameter settingof IO-Link sensors and actuators
QA0012
Enterprise Resource Planning,e.g. SAP, INFOR, BaaN
Manufacturing Execution System
– Diagnosis– Traceability
ERP
MESSCADA
Machine PLC
IO-Link sensors
Parameter setting App
System requirements:– Windows 7 SP1, Windows 8.1, Windows 10, Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016– CPU Intel Dual Core 2.0 GHz– 2 GB RAM– 5 GB free hard disk space– Web browser Chrome, Firefox, Internet Explorer 11, Microsoft Edge
98
RFID 13,56 MHz
RFID with CANopenor J1939 interfacefor mobile machines
Optimised for outdoor use withIP 67 and IP 69K
Extended temperature range of -40...85 °C
E1 type approval
Shock and vibration resistant to EN60068
Versions with CANopen orJ1939 interface
RFID compact units suitable for mobile useThe robust RFID compact units with CANopen or J1939 interface have been developed for identification tasks in agricultural machines, municipalvehicles and construction machines. This guarantees a quick and safechange of the attachments. The machine operator knows which units areconnected at any time. He also receives exact information on operating times and maintenance intervals. This allows new service scenarios.
Simple solution from ifmRFID antenna, evaluation and interface are integrated in one compact androbust M18 or M30 housing. In contrast to conventional solutions with separate antennas and evaluationsystems the wiring complexity and required space are reduced.
Identification systems
99
(04.2016)
For further technical details please visit: www.ifm.com
Description Orderno.
E80370ID tag/30X2.8/03 – 13.56 MHz, 16 Kbits – FRAM
E80371ID tag/30X2.5/06 – 13.56 MHz, 896 bits
E80377ID tag/R20X2.5/06 – 13.56 MHz, 896 bits
The products
E80380ID tag/30X2.8/03 – 13.56 MHz, 64 Kbits
E80381ID tag/4.35X3.6/03 – 13.56 MHz, 896 bits, 10 pcs
E80382ID tag/label 65X30/03 – 13.56 MHz, 896 bits, 500 pcs
E80379ID tag/label 80X50/03 – 13.56 MHz, 896 bits, 500 pcs
Further technical data
Operating voltage [V DC] 9...32
Current consumption sensor [mA] < 50 at 24 V,< 85 at 12 V
Ambient temperature [°C] -40...85
Protection rating, protection class
IP 67 / IP 69K, III
Housing material stainless steel
Interfaces 1 x CAN
Supported CAN protocols CANopen, SAE J1939
Standards and tests(extract)
CE, radio approval
Connection M12 connector
Jumper, M12,5 m, black, PUR cable, LED EVC039
Jumper, M12,5 m, black, PUR cable EVC069
Socket, M12,2 m black, PUR cable EVM036
Socket, M12,10 m black, PUR cable EVM038
Socket, M12,5 m black, PUR cable EVC492
RFID transponders
Accessories
BasicDisplay XL, 4,3",CAN Interface CR0452
Display
Connection technology
Type Description Order no.
Type Description Order no.
Process and dialogue unit PDM360 NG,7" colour display CR1081
DTM424M18 flush, 13.56 MHz
DTM425M18 non-flush, 13.56 MHz
DTM434M30 flush, 13.56 MHz
DTM435M30 non-flush, 13.56 MHz
RFID evaluation unit / RFID antennaCANopen interface
DTM426
DTM427
DTM436
DTM437
RFID evaluation unit / RFID antennaSAE J1939 interface
M18 flush, 13.56 MHz
M18 non-flush, 13.56 MHz
M30 flush, 13.56 MHz
M30 non-flush, 13.56 MHz
ApplicationMobile machines are becoming ever more complex and complicated to use. Individual components assumemore and more tasks.With ifm's RFID system handling can be simplified and errors can be avoided: individual components orattachments are identified by means of an RFID tag andthe corresponding set-up is set automatically in thecontroller.Set-up times are minimised. Automatic identificationsimplifies the creation of user-specific system set-ups.Wrongly set process parameters are a thing of the past.
Higher productivityInformation on maintenance intervals and operatingtimes can automatically be generated and stored sincethe controller detects when and how long a specificmachine set-up runs. This increases productivity.
Perfectly suited for use in industrial applicationsThe RFID system is also suitable for industrial applications in which CANopen controllers are used. In this environment the DTM4xx RFID identification system is ideal thanks to its excellent price / performance ratio.
100
Systems for mobile machines
ecomatController V3 – standard andsafety controller in one unitControllers
Powerful 32-bit triple-core controllers with large applica-tion memory in one unit
Can be used as safety controller(SIL2/PL d) with CANopen Safety support
Independent controllers with scalable I/O assignmentfor standard and safety applications
Two Ethernet ports with internal switch
Powerful standard and safety PLC in one unitModern vehicles and mobile machines need very powerful control electronics to process the high number of input and output signals. That is why the new third generation ecomatController was developed: It has two independent, powerful 32-bit PLCs – one of them a certifiedsafety controller. In addition to its multifunctional inputs and outputs with diagnostic capabilities, the unit features two Ethernet ports and four CAN interfaces.The CAN interfaces support all important bus protocols (CANopen, CANopen Safety and J1939) as well as the transparent and preprocesseddata exchange. The control functions are easily integrated into the applica-tion program thanks to CODESYS programming (version 3.5).
101
(04.2017)
For further technical details please visit: www.ifm.com
Features and benefits
Sturdy mechanical designThe control electronics are integrated into a compactmetal housing with front-mounted, coded central plugsfor mobile use, providing all the necessary connectionsfor inputs, outputs, communication and programming.RGB status LEDs indicate the most important systemmessages.
• Powerful electronicsThe core of the controller, which has been designedaccording to the applicable standards for electronicsin mobile applications, is one of the most advancedmulti-core 32-bit processors with 300 MHz clock frequency. Its 6 MByte application memory includes a1 MByte file storage system. Two internal, independently programmable controllers allow for subdivision of the application software if required. Consequently, the safe program part can beexecuted without interference from the general program execution. This ensures reliable operationeven with complex control functions. The controllercan be used in applications up to EN 13849 PL d andEN 62061 SIL cl2.
• Configurable inputs and outputsThe inputs and outputs can be configured as digital,frequency or analogue inputs with diagnostic function or as inputs for resistance measurement. The analogue inputs enable both current and voltage measurement. The outputs can be configured as digital or PWMoutputs with diagnostic capabilities, with or withoutcurrent control. All inputs and outputs can also be configured as safechannels if required. Thus, safe sensors and actuatorscan be directly connected and processed in the application software.
Programmable to IEC 61131-3 with CODESYSProgramming is done by means of the standardisedIEC 61131-3 languages. Established and certified libraries are available for special functions and safeapplications.Maintenance, diagnosis and updates are performedusing TFTP via Ethernet and the maintenance tool.Additionally, these functions can be accessed via anapplication interface for ifm’s PDM displays and via asoftware development kit for customer applications.
• Interfaces with extended functionalityBesides an RS-232 interface and the Ethernet interface with internal switch, all controllers provide four CANinterfaces to ISO 11898. All CAN interfaces support the essential bus protocolsCANopen, CANopen Safety and J1939.
Indication 8 x status LED
Programming CODESYS V 3.5
Protocols CAN
Ethernet
CANopen, SAE J 1939 or free protocol TCP/IP, Modbus
Application memory [MB] 6
Safety-related characteristics IEC 62061 SIL cl2ISO 13849-1 PL d
Standards and tests(extract)
CE, E1 (UN-ECE R10), EN 50 155
Common technical dataecomatController
Housing metal housing
Device connection
1 x 81-pole Tyco/AMP, 4 x M12 – CR071x
2 x 81-pole Tyco/AMP, 4 x M12 – CR072x
Protection IP 67
Operating voltage [V DC] 8...32
Temperature range [°C]operation/storage -40...85
CAN interface CAN
Ethernet RS232
ISO 11898, 20 Kbits/s...1 Mbit/s
10/100 Mbits/s9.6...115.2 kBit/s
ecomatController Order no.
M30721M30720M30711
Number of inputs (can be configured)
Analogue Multifunctional/digital
Frequency/digital (pos./neg. signals)
Resistance/digital
Digital
Sensor supply
16
8
4
4
•
24
16
4
16
•
24
16
4
24
•
Number of outputs (can be configured)
PWMi/digital 4.0 A /H-bridge
PWMi/digital 4.0 A
PWMi/digital 2.5 A
Digital 2.5 A
Analogue output
6
3
9
9
1
8
4
12
12
2
12
6
18
18
2
AccessoriesDescription
Orderno.
Connection cable, 58-pole, 2.5 m, plug code A EC0710
Connection cable, 81-pole, 2.5 m, plug code A EC0711
Connection cable, 47-pole, 2.5 m, plug code B EC0720
Connection cable, 73-pole, 2.5 m, plug code B EC0721
Plug unwired incl. contacts, code A EC0701
Plug unwired incl. contacts, code B EC0702
Ethernet cable cross-link, 2 m, M12/RJ45, PVC E11898
CAN programming interface CANfox EC2112
Adapter set CAN/RS232 for CANfox EC2113
102
Systems for mobile machines
ioControl – ruggedI/O module with integrated controller
I/O modules
I/O module for mobile use with high protection rating and DEUTSCH connectors
Can be used as independent,CODESYS-programmable mini controller
Display and keyboard interfacefor parameter setting
Configurable input/outputfunction
Two CAN interfaces with CANopen and J1939 protocol
Decentralised I/O module and mini controller in one unitioControl is a decentralised I/O module connected to the controller via CAN bus. It is installed away from the controller on remote machine partsright where the signals are generated. The high protection rating makes itsuitable for outdoor installation in wet and dirty areas. DEUTSCH connectors, which are widely used in mobile automation, ensurean easy and safe connection of sensors and actuators. Networking of theCAN bus is effected via prewired drop cables.ioControl can either be used as a configurable I/O module or as a mini controller in the field. CODESYS is used as a programming system.
103
(04.2017)
For further technical details please visit: www.ifm.com
Features and benefitsThe decentralised I/O modules of the ioControl systemconnect binary and analogue sensors to a controller viaCAN bus using the CANopen protocol. Furthermore,I/O modules provide additional functions for signal preprocessing. The compact, glass-fibre reinforced housing features reverse-polarity protected DEUTSCH connectors suitablefor mobile use, providing all the necessary connectionsfor inputs, outputs, communication and programming.An integrated two-colour LED display with keyboardserves to indicate the most important system messages,the baud rate and the node number as well as for device configuration. An extensive range of connection cables completes the offer.
• Configurable inputs and outputsA high degree of flexibility is provided by the configurable inputs and outputs. There is a choice ofanalogue and digital inputs. The analogue inputs canbe set as current inputs (0...20 mA) or voltage inputs(0...10 V / 0...32 V).For digital and analogue I/O modules, the profile DSP 401 has been defined. The input/output functions of the module are configured via the device object directory.
• The electronicsThe core of the controller, which has been designedaccording to the applicable standards for electronicsin mobile applications, is a modern 32-bit processor.Its monitoring and protective functions enable reliable operation even under extreme operating conditions.
Programmable to IEC 61131-3 with CODESYSApart from their application as I/O modules, all unitscan also be used as freely programmable mini controllers with CANopen and J1939 among others. Programming is done via CODESYS by means of thestandardised IEC 61131-3 languages, allowing theuser to build the application software with ease. In addition, libraries are available for special functionsof the controller.
• Communication interfacesioControl is equipped with two CAN interfaces to ISO 11898 for programming and data exchange withconnected modules, controllers, displays or an enginecontroller.
Products
Programming CODESYS V 2.3
Protocols CAN CANopen, SAE J 1939 or free protocol
Total memory 1536 Kbits
Application memory 512 Kbits
Standards and tests(extract)
CE, E1 (UN-ECE R10), EN 50 155
Technical dataioControl
Housing impact-resistant polyamide
Device connection inputs/outputs CAN interface 1 supply voltage CAN interface 2
6 poles (Deutsch DT04-6p)
6 poles (Tyco/AMP)
Protection IP 65, IP 67
Operating voltage [V DC] 8...32
Current consumption [mA] ≤ 200 (without external load)
Temperature range [°C]operation/storage -40...85
Interfaces CAN
2.0 A/B CiA DS 301 V4,CiA DS 401 V 1.4
ISO 11898, 20 Kbits/s...1 Mbit/s(default 250 Kbits/s)
ioControl
Number of inputs (can be configured)
Analogue multifunctional /digital
Analogue multifunctional /frequency/digital
Frequency/digital
Resistance/digital
Number of outputs (can be configured)
PWMi/digital 4.0 A
PWM/digital 4.0 A
PWMi/digital 2.5 A
PWM/digital 2.5 A
Description Orderno.
Accessories
Connection cable, DT06-6P for 2 inputs, 2m E12547
Connection cable, DT06-6P/M12 for 2 inputs, 2m E12562
Connection cable, DT06-6P for 2 outputs, 2m E12553
Patch cable, CAN DT06-6P/DT06-6P, 1m EC1256
Connection cable, AMP-6P for module supply, 2m E12565
CAN programming interface CANfox EC2112
Adapter set CAN/RS232 for CANfox EC2113
Order no.
CR2052
–
4
–
4
4
–
4
–
104
Systems for mobile machines
Real-time clock withCAN interface
Diagnostic and service units
Automotive relay housing keeps size down
CAN to communicate with the controller
Integrated alarm output
Predefined CODESYS functionblocks for easy integration
Robust design for mobile applications
Real-time measurement for mobile machinesThe exact system time is an important function for many mobile applications. While in large and complex machines this task is often fulfilled by the central display, up to now, there was no affordable solution for mobile applicationswhen it came to small and compact machines.In its compact automotive relay housing, the CANrtc real-time clock canoffer this functionality. Its parameters can be set via the CAN bus while itprovides the current time and date. Via an integrated alarm output, it ispossible to execute functions such as starting the machine controller. For the CANrtc, a software library of the CODESYS software is availablethat is compatible with IEC61131-3. This makes it particularly easy to quickly implement the application software.
105
(11.2016)
For further technical details please visit: www.ifm.com
Functions and advantagesThe compact real-time clock is an ideal add-on both for control systems in small and compact machines andcomplex process controllers of big machines.
• Mechanical designThe compact housing of the electronics is equippedwith an ISO 7588 blade arrangement providing allnecessary connections. These are easy to handle and available all over theworld. The CANrtc can also be used in areas that are exposed to splashing water due to an increasedprotection rating if installed in connection with theBasicRelay CR0421 and the corresponding modulecover.
• Powerful electronicsThe electronics are optimally adapted to the applica-tion. The integrated buffer battery reliably bridgesany supply voltage interruptions. At a freely adjustable point of time, the alarm output activates a connectedconsumer or the system electronics.
• Programmable to IEC 61131-3The CODESYS software enables a clear and easy creation of the application software for the user. Forthe CANrtc real-time clock, a library with the necessary functions for parameter setting and communication is available.The parameters can be set and read via the user program. The RTC data is also available to other busparticipants via the open CANinterface.
Description Orderno.
CAN real-time clock – CANrtc CR3020
Products
BasicRelay locations for 6 automotive relays ad 10 automotive fuses (6.3 mm), 2 supply rails and 6 power distributors, freely wirable
CR0421
Contact set for BasicRelay CR0421, wirable, utilising allconnections to a BasicController relay EC0457
Cover for BasicController CR04xx and BasicRelay CR042x, incl. cable seal EC0401
CAN programming interface CANfox EC2112
Adapter set CAN/RS232 for CANfox EC2113
CODESYS programming software, German CP9006
CODESYS programming software, English CP9008
Indication 1 x status LED (green)
ProgrammingCODESYS (IEC 61131-3)
or CAN Layer 2 commands
RTC formatDay / month / year /
hour / minute / second / day of the week
RTC accuracy ± 2 s /day (at 25°C)
RTC battery life ≤ 15 years (cannot be replaced)
Standards and testsFor further information,please refer to the datasheet: www.ifm.com
Technical data
CAN real-time clock – CANrtc
Housing Plastic
Device connection
6.3 mm flat-pin connectorwith a blade arrangement
to ISO 7588(can be used for example
with BasicRelay CR0421 orautomotive relay holder)
Protection rating,in connection with BasicRelay CR0421and cover EC0401
IP 20IP 54
Operating voltage [V DC] 8...32
Current consumption [mA] 6 (at 24 V DC)
Temperature rangeOperation [°C]Storage [°C]
-40...85-40...85
CAN interface
125 kbit/s / 250 kbit/s /500 kbit/s
(Default: 250 kBit/s), CAN Layer 2
Output
Switching voltage / switching current
Semiconductor output, Positive switching
(high side) Short-circuitand Overload protection
UB - max. 1.5 V DC / ≤ 2 A
106
Systems for mobile machines
CANwireless: wifi and Bluetoothfor the CAN bus
Diagnostic and service units
Wifi / Bluetooth connection formobile machines
Connection, programming,maintenance and diagnosis ofmachines – without any cables
Supports MaintenanceTool, CODESYS and Service-Tool
“Infrastructure” and “AccessPoint” operation modes
Compact and robust housing
Wireless connectivity for mobile machinesUsing the latest technologies, such as wifi supporting both 2.4 GHz and 5 GHz frequency bands and Bluetooth, multiple ways of connecting to themachine via radio are possible.CANwireless allows wireless connection to the machine directly from the existing ifm tools for mobile control systems such as CODESYS or the MaintenanceTool.In addition to the connection between PC or mobile end device and themobile machine, the machines can also be connected to each other.Using CANwireless, machines can exchange information and work together.The device thus supports the technologies of Industry 4.0 and IoT (Internetof Things) and makes the machines even more intelligent.
107
(11.2016)
For further technical details please visit: www.ifm.com
Functions and featuresCANwireless enables a wireless connection to the CAN bus in a vehicle or machine. With the two basicoperating modes “Infrastructure” and “Mini AccessPoint”, the module is able to create a connection in different ways.
• Operating mode “wifi Infrastructure”In the operating mode “Infrastructure”, a CANwirelessis configured to connect to an existing wifi infrastruc-ture. When connected to the network, the device canconnect automatically to another network participant(client) or listen to incoming connection requests (server). CAN bus data can be exchanged with other connectednetwork participants.
• Operating mode “wifi Mini Access Point”A CANwireless configured as mini wifi access pointwill create its own wifi network to which multipleother devices, e.g. other CANwireless devices, PCs,smartphones or tablets, can connect. As in the operating mode “Infrastructure”, the devicecan act as both client or server in its own network.Data on the CAN bus of the mini AP device will beshared with the other connected network participants.
• CAN to CAN bridgeThe operating modes “wifi Infrastructure”, “wifi MiniAccess Point” or “Bluetooth” also support a wirelessCAN bus bridge between several CANwireless devices.
• Wireless diagnoses and debuggingTools like CODESYS V2.3 and the maintenance toolallow the use of CANwireless as interface to the machine.
• CAN to wifi / Bluetooth filterIf required, CANwireless devices can filter data to betransferred by radio. This reduces the data load andincreases the operational reliability.
Description Orderno.
CAN to wifi / Bluetooth, CANwireless with integrated antenna CR3130
Products
CAN to wifi / Bluetooth, CANwireless for external antenna CR3131
CANwireless wifi /Bluetooth external antenna for CR3131 EC2118
M12 socket, shielded,2 m black, PUR cable, 5 poles EVC544
M12 socket,2 m black, PUR cable, 5 poles EVC070
wifi protocol IEEE 802.11 a/b/g/n, IEEE 802.11 d/e/i/h
wifi / Bluetooth - range 75 m (internal antenna),200 m (external antenna)
BluetoothClassic Bluetooth,
Version: 2.1 + EDR,Serial Port Profile (SPP)
Indication 1 x status LED (2 colours)
Standards and testsFor further information,please refer to the datasheet: www.ifm.com
Technical data
CANwireless
Housing Plastic
Connection M12 CAN/powerM12 service port
Protection rating Internal antennaExternal antenna
IP 67IP 65
Operating voltage [V DC] 8...32
Current consumption [mA]sleep mode
60 mA (24 V DC)< 1 mA (24V DC)
Temperature range [°C]Operation -40...75
CAN interface
CAN 2.0 A/B, ISO 11898-2CANopen,
Layer 2, J1939
wifi frequency 2.4 GHz / 5 GHz
108
Connection technology
Always a reliableconnection. ecolinkM12 – even for special applicationsecolink M12 for demanding applications
Connection technology meetsthe M12 standard (EN 61076)
Optimum sealing even when fastened by hand
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
LEDs clearly visible even inbright lighting conditions
ecolink M12 for demanding applicationsMost applications require special solutions. Only reliable production pro-cesses and faultless assembly lead to success in the long run.The integrated end stop protects the O-ring against destruction caused by over-tightening the nut. No tools needed for installation and removal.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials and intense monitoring during and after the pro-duction guarantee the highest quality standard.
109
(11.2016)
For further technical details please visit: www.ifm.com
Technical data:Operating voltage: 10...36 V DCCurrent rating: 4 A (cURus 3 A)Protection rating: IP 67, IP 68, IP 69Kin locked condition with the matching counterpart.Tightening torque: 0.6...1.5 NmVibration / shock: 750 g, 1 million cyclesCable: 4 x 0.34 mm2
Drag chain > 5 million cycles(EVT: > 1 million cycles)
Approvals:cRUus
Applications:EVC – factory automation, machine tool industryEVT – hygienic and wet areasEVM – mobile applicationsEVW – welding applications
Products
Dimensions
Type Description Order no.
Factory automation and the machine tool industry
2.0 m, PUR cable, black EVC644
5.0 m, PUR cable, black EVC645
10.0 m, PUR cable, black EVC646
Mobile applications
2.0 m, PUR cable, black EVM068
5.0 m, PUR cable, black EVM069
10.0 m, PUR cable, black EVM070
Welding applications
2.0 m, PUR cable, grey EVW167
5.0 m, PUR cable, grey EVW168
10.0 m, PUR cable, grey EVW169
Hygienic and wet areas
2.0 m, PVC cable, orange EVT461
5.0 m, PVC cable, orange EVT462
10.0 m, PVC cable, orange EVT463
25.0 m, PVC cable, orange EVT464
Wiring diagram
EVC, EVM, EVW, EVT
out
out
L+
L
1
3
4
YE GN
BN
BU
BK
2 WH
YE
YE GNYE
3 x LED
3 x LED
15,5
M12x1 45
14
EVC, EVW
3 x LED
3 x LED
45
14
15,5
M12x1
EVM
3 x LED
3 x LED
45
14
15,5
M12x1
EVT
110
Connection technology
ecolink M12 cables reduce voltage drop
Industrial applications / factory automation
Cables with 4 x1 mm2 reducevoltage drop
Connection technology meetsthe M12 standard (EN 61076)
Optimum sealing even whenmounted without tools
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
ecolink performance cable for demanding applicationsThe increased wire cross-section of 1mm2 even conducts higher voltageswith lower voltage drop.The integrated end stop protects the O-ring against destruction caused byover-tightening the nut. No tools needed for installation and removal.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials and intense monitoring during and after the production guarantee the highest quality standard.
111
(11.2016)
For further technical details please visit: www.ifm.com
Technical data:Operating voltage: 250 V AC / 300 V DCCurrent rating: 4 A (cURus 3 A)Protection rating: IP 67, IP 68, IP 69K in locked condition with the matching counterpart.Tightening torque nut: 0.6...1.5 Nm Note the maximum value of the counterpart.Vibration / shock: 750 g, 1 million cycles
Materials:Housing / moulded body: PURCoupling nut: nickel-plated brassContacts: gold-platedSealing ring: VitonCable: 4 x 1 mm2, drag chain > 1 million cycles
Approvals:cURus in progress
Applications:Factory automation, machine tool industry
Products
M12 sockets
Dimensions
49,5
14
15,5
M12x1
45
14
L
15,5
M12x1
Example EVC716
Type Description Order no.
2.0 m EVC706
5.0 m EVC707
10.0 m EVC708
20.0 m EVC709
50.0 m EVC710
2.0 m EVC711
5.0 m EVC712
10.0 m EVC713
20.0 m EVC714
50.0 m EVC715
0.25 m EVC716
0.5 m EVC717
1.0 m EVC718
2.0 m EVC719
5.0 m EVC720
10.0 m EVC721
20.0 m EVC722
0.25 m EVC723
0.5 m EVC724
1.0 m EVC725
2.0m EVC726
5.0 m EVC727
10.0 m EVC728
20.0 m EVC729
0.25 m EVC730
0.5 m EVC731
1.0 m EVC732
2.0 m EVC733
5.0 m EVC734
10.0 m EVC735
20.0 m EVC736
0.25 m EVC737
0.5 m EVC738
1.0 m EVC739
2.0 m EVC740
5.0 m EVC741
10.0 m EVC742
20.0 m EVC743
1
2
3
4
BN
WH
BU
BK
Wiring diagram
1
2
3
1
2
3
4 4
Example EVC706 Example EVC716
Jumper M12 / M12
112
Connection technology
Compact low-profileM8 splitters with secure ecolink connectionIndustrial applications / factory automation
O-ring protection by a mechanical end stop
Perfect ingress resistance evenwhen mounted without tools
High-quality materials for permanent reliability
Connection technology meetsthe M8 standard (EN 61076)
Little space required due tolean and flat design
Small design – maximum protectionIn particular where space is at a premium, e.g. in robotics, handling and assembly technology, most applications require special solutions. Here the new, lean and flat M8 splitter with the tried-and-tested safe ecolink technology is a convincing solution. Only high-quality materials, safe production processes and fault-free installation ensure high machine uptime in the long run.
ecolink technologyThe new ecolink technology prevents incorrect mounting. An integratedmechanical end stop protects the O-ring from destruction. So, rapid andsecure installation is possible without an expensive torque wrench.
113
(11.2016)
For further technical data please go to: www.ifm.com
Technical data:Operating voltage: with LED 10...30 V DCNominal current:total max. current rating 6 Amax. 2 A per locationwith M12 connectiontotal max. current rating 2 Amax. 2 A per locationProtection: cable connection IP 65, IP 67, IP 68 connector IP 65, IP 67 in locked condition with the matching counterpart.Tightening torque M8 connector: 0.3...0.6 Nm,adhere to the maximum value of the counterpartAmbient temperature: -25...80 °C
Materials:Housing: PURContact carrier: PAFitting: CuZn/NiContacts: gold-platedSealing ring: VitonCable: PUR, halogen-free
Applications:Factory automation, machine tools, hydraulics
Products
M8x1
17
20
4,5
4,5
3016
129,
5 101
4,3
1122
Dimensions
Example EBC054
M12x1
17
23,7
4,5
4,5
3016
85,4
574,
3
M8x1
1122
Example EBC050
Splitter with cable connection · LED · PNP
EBC048
EBC051EBC049
EBC052
44
2 and 42 and 4
510510
EBC054
EBC056EBC055
EBC057
44
2 and 42 and 4
510510
EBC136EBC137
44
510
M12, 8-pole
M12, 12-pole
EBC0504
M16, 8-pole EBC0532 and 4
M12, 12-pole EBC1384
Type Signals on pin
Order no.Connection/Cable[m]
Splitter with connector · LED · PNP
EBC1394Connection technology
Type Description Orderno.
Socket, M12, 8-pole10 m black, PUR cable
Socket, M12, 8-pole5 m black, PUR cable
Socket, M12, 8-pole10 m black, PUR cable
Socket, M16, 8-pole5 m black, PUR cable
Socket, M16, 8-pole10 m black, PUR cable
E11311
E11232
E12260
E11226
E11227
Socket, M12, 12-pole,5 m black, PUR cable E12502
Socket, M12, 12-pole,10 m black, PUR cable E12503
Socket, M12, 12-pole,15 m black, PUR cable E12504
Socket, M12, 12-pole,5 m black, PUR cable E12457
Socket, M12, 12-pole,10 m black, PUR cable E12505
Socket, M12, 12-pole,15 m black, PUR cable E12506
114
Connection technology
ecolink M12 – the secure connectioneven in difficult applicationsUse in wet areas and in the food beverage industry
Halogen-free and silicone-free
Contoured nut with enhancedgrip makes for optimum sealingeven when hand tightened
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
LEDs clearly visible even underbright lighting
ecolink M12 for hygienic and wet areas in the food industryMost applications require special solutions. Only high-quality materials, safe production processes and faultless mounting lead to success in thelong run.The integrated end stop protects the O-ring against destruction caused by tightening the nut too much. Mounting and removal are carried out without tools.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials especially adapted to the application and intensivemonitoring during and after production guarantee maximum quality standards.
115
(04.2017)
For further technical details please visit: www.ifm.com
Technical data:Operating voltage:4-pole: 250 V AC / 300 V DC5-pole: 60 V AC / DCwith LED: 10...36 V DCNominal current: 4 AProtection: IP 67, IP 68, IP 69KIn locked condition with the matching counterpart.Tightening torque nut: 0.6...1.5 NmNote the maximum value of the counterpart.Ambient temperature: -25...100 °CVibration / shock: 750 g, 1 million cycles
Materials:Housing / moulded body: PPContact carrier: PA 6.6Coupling nut: high-grade stainless steel (316L / (1.4404)Contacts: gold-platedSealing ring: EPDMCable: MPPE halogen-free, silicone-free, 4-pole: 4 x 0.34 mm2, Ø 4.9 mm5-pole: 5 x 0.34 mm2, Ø 5.1 mm
Approvals:cCSAus in preparation
Applications:Hygienic and wet areas in the food industry
The products
Type Description Orderno.
M12 sockets · 4-pole
5.0 m
10.0 m
25.0 m
5.0 m
10.0 m
25.0 m
5.0 m, LED
10.0 m, LED
25.0 m, LED
EVF001
EVF002
EVF003
EVF004
EVF005
EVF006
EVF007
EVF008
EVF009
M12 sockets · 5-pole
5.0 m EVF010
10.0 m EVF011
25.0 m EVF012
5.0 m EVF013
10.0 m EVF014
25.0 m EVF015
Dimensions
L
15,5
M12 x1
49
14
45
15,5
M12 x1 14
Example EVF040
L49
14
15,5
M12 x1
M12x136,5
15,5
26,5
14
LEDExample EVF052
0.3 m EVF040
0.6 m EVF041
1.0 m EVF042
2.0 m EVF043
5.0 m EVF044
10.0 m EVF045
0.3 m EVF046
0.6 m EVF047
1.0 m EVF048
2.0 m EVF049
5.0 m EVF050
10.0 m EVF051
0.3 m EVF052
0.6 m EVF053
1.0 m EVF054
2.0 m EVF055
5.0 m EVF056
10.0 m EVF057
Jumper · M12 / M12 · 4-pole
1
2
3
4
BN
WH
BU
BK
Wiring diagram
out
out
L+
L
1
3
4
GN YE
2
1
3
4
2
YE
Example EVF001 Example EVF052
116
Connection technology
ecolink M12 cablewith 1 mm2 for reduced voltage drop
Use in wet areas and in the food and beverage industry
Cables with 4 x 1 mm2 reducethe voltage drop
Halogen-free and silicone-free
Contoured nut with enhancedgrip makes for optimum sealingeven when hand tightened
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
ecolink M12 for hygienic and wet areas in the food industryMost applications require special solutions. Only high-quality materials, safe production processes and faultless mounting lead to success in thelong run.The integrated end stop protects the O-ring against destruction caused by tightening the nut too much. Mounting and removal are carried out without tools.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials especially adapted to the application and intensivemonitoring during and after production guarantee maximum quality standards.
117
(04.2017)
For further technical details please visit: www.ifm.com
Technical data:Operating voltage: 250 V AC / 300 V DCNominal current: 4 AProtection: IP 67, IP 68, IP 69KIn locked condition with the matching counterpart.Tightening torque nut: 0.6...1.5 NmNote the maximum value of the counterpart.Ambient temperature: -25...100 °CVibration / shock: 750 g, 1 million cycles
Materials:Housing / moulded body: PPContact carrier: PA 6.6Coupling nut: high-grade stainless steel (316L / (1.4404)Contacts: gold-platedSealing ring: EPDMCable: MPPE halogen-free, silicone-free, 4 x 1 mm2 (32 x Ø 0.2 mm), Ø 6.2 mm
Approvals:cCSAus in preparation
Applications:Hygienic and wet areas in the food industry
The products
Type Description Orderno.
M12 sockets · 4-pole
Jumper · M12 / M12 · 4-pole
Dimensions
Example EVF058
Example EVF082
Wiring diagram
Example EVF480 Example EVF490
2.0 m
5.0 m
10.0 m
20.0 m
50.0 m
EVF480
EVF481
EVF482
EVF483
EVF484
2.0 m
5.0 m
10.0 m
20.0 m
50.0 m
EVF485
EVF486
EVF487
EVF488
EVF489
L
15,5
M12 x1
49
14
45
15,5
M12 x1 14
LM12x1
36,515,5
26,5
1414M12x1 15,5
30,5
36,5
0.25 m EVF490
0.5 m EVF491
1.0 m EVF492
2.0 m EVF493
5.0 m EVF494
10.0 m EVF495
20.0 m EVF496
0.25 m EVF497
0.5 m EVF498
1.0 m EVF499
2.0 m EVF500
5.0 m EVF501
10.0 m EVF502
20.0 m EVF503
0.25 m EVF504
0.5 m EVF505
1.0 m EVF506
2.0 m EVF507
5.0 m EVF508
10.0 m EVF509
20.0 m EVF510
0.25 m EVF511
0.5 m EVF512
1.0 m EVF513
2.0 m EVF514
5.0 m EVF515
10.0 m EVF516
20.0 m EVF517
1
2
3
4
BN
WH
BU
BK
1
2
3
1
2
3
4 4
118
Connection technology
ecolink M12 EthernetD-Code for hygienicand wet areas
Use in wet areas and in the food and beverage industry
Halogen-free and silicone-free
Contoured nut with enhancedgrip makes for optimum sealingeven when hand tightened
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
Protection rating: IP 65, IP 67, IP 68, IP 69K
Ethernet CAT 5 / CAT 5e (star quad)
ecolink M12 for hygienic and wet areas in the food industryMost applications require special solutions. Only high-quality materials, safe production processes and faultless mounting lead to success in thelong run.The integrated end stop protects the O-ring against destruction caused by tightening the nut too much. Mounting and removal are carried out without tools.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials especially adapted to the application and intensivemonitoring during and after production guarantee maximum quality standards.
119
(04.2017)
0.25 m
For further technical details please visit: www.ifm.com
Technical data:Operating voltage: 50 V AC / 60 V DCEthernet: M12 D-Code, CAT 5 / CAT 5eNominal current: 4 AProtection: IP 65, IP 67, IP 68, IP 69K In locked condition with the matching counterpart.Tightening torque nut: 0.6...1.5 NmNote the maximum value of the counterpart.Ambient temperature: -25...80 °CVibration / shock: 750 g, 1 million cyclesDrag chain: > 2 2 million cycles
Materials:Housing / moulded body: PPContact carrier: PA 6.6Coupling nut: high-grade stainless steel (316L / (1.4404)Contacts: gold-platedSealing ring: EPDMCable: MPPE halogen-free, silicone-free, 4 x 0.34 mm2 (7 x 0.25 mm), Ø 6.5 mm
Approvals:cCSAus in preparation
Applications:Hygienic and wet areas in the food industry
The products
Type Description Orderno.
M12 sockets · 4-pole
2.0 m
5.0 m
10.0 m
20.0 m
50.0 m
EVF518
EVF519
EVF520
EVF521
EVF522
Dimensions
49
1415
,5
M12 x1
Example EVF518
L49
14
15,5
M12 x1
49
1415
,5M12 x1
Example EVF528
EVF528
0.5 m EVF529
1.0 m EVF530
2.0 m EVF531
5.0 m EVF532
10.0 m EVF533
20.0 m EVF534
Jumper · M12 / M12 · 4-pole
1
2
3
4
YE
WH
OG
BU
screen
Wiring diagram
1
2
3
1
2
3
4 4
screen
Example EVF518 Example EVF528
120
Connection technology
ecolink M12 –T splitters for difficult applicationsUse in wet areas and in the food beverage industry
Halogen and silicone-free
Connection technology meetsthe M12 standard (EN 61076)
Optimum sealing even whenmounted without tools
The mechanical end stop protects the O-ring against destruction
Visible and tactile marking of the ports
ecolink M12 for hygienic and wet areas in the food industryMost applications require special solutions. Only high-quality materials, safe production processes and faultless mounting lead to success in thelong run.The integrated end stop protects the O-ring against destruction caused by tightening the nut too much. Mounting and removal are carried out without tools.High-quality materials especially adapted to the application and intensivemonitoring during and after production guarantee maximum quality standards.
121
(11.2016)
For further technical data please go to: www.ifm.com
Technical dataOperating voltage:4-pole: 250 V AC / 300 V DC5-pole: 60 V AC / DCNominal current: 4 AProtection rating: IP 67, IP 68, IP 69Kin locked condition with the matching counterpart.Tightening torque: 0.6...1.5 NmAmbient temperature: -25...100 °C
Materials:Housing / moulded body: PACoupling nut (non-rotatable):high-grade stainless steel (316L / 1.4404)Contacts: gold-platedSealing ring: EPDM
Approvals:cRUus in preparation
Applications:For hygienic and wet areas in the food industry
Products
Type Wiring diagramno.
Order no.LED
1 x M12 male, 2 x M12 female
1 –
2
3
4
–
–
–
5
6
–
–
Dimensions
M12x1
48,716
389
21
M12x1
CB
A
M12x1
14
Wiring diagram
4
1 1
3
4
3
2
B
A
1
3
4
C
1 1
33
55
B
A2
4
2
1
3
5
4
2
4
C
1 1
3
5
3
5
44
B
A
1
3
5
4
2
C
1 1
2
3
2
3
4
B
A
1
2
3
4
5
5
4
5
C
1
2
3
4
1 1
3
5
3
5
22
B
A
1
3
5
2
4
C
5
1 1
3
5
4
3
4
B
A
1
3
4
5
C
5
6
EBF006
EBF007
EBF008
EBF009
EBF010
EBF011
122
Power supplies
Powerful switched-mode power supplywith an enormouspower reserve24 V DC switched-mode power supplies
50 % power reserve for up to 4 seconds
AC wide-range input
Compact, slim design
High degree of efficiency of around 95 %
LEDs for OVL and DC OK output
PowerfulWith 50 % power reserve for up to 4 seconds these power supplies providesufficient power to cope with short current spikes even when operated attheir limit.
EfficientThese power supplies are designed for great efficiency and reach a higher-than-average figure of around 95 %. This saves energy costs and reduces waste heat in the control cabinet.
Space-savingInnovative technology means the new ifm power supplies require considerably less space in the panel, as compared to common cabinetpower supplies.
123
(04.2016)
24 V DC switched-mode power supplies for rail mounting
Output current permanent / peak
at 24 V DC
Output voltage
[V]
Input voltage
[V AC]
OutputDC OK signal
Efficiency(120 / 230 V AC)
[%]
Orderno.
40 A / 60 A 24...28 DC; adjustable 100...240 Relay93.6 / 94.6 E84016
40 A / 60 A 24...28 DC; adjustable 3 x 380...480 Relay95.3 / 95.2 E84036
Further technical data
Functions and advantages
Power reserveThese power supplies provide an excellent power reserve of 50 percent for up to four seconds to copewith short current loads.
Inrush current limitationInstead of an inrush current limitation with a simpleNTC element, charging the capacitors of the new ifm switched-mode power supplies is microprocessor-controlled. This allows the selectivity of fuses protectingthe inputs on the primary side and saves wiring costs.
Long bridging timesThe voltage supply is ensured for several milliseconds ifthe mains voltage briefly fails, e.g. caused by switchingoperations in the supply network.
Wide operating temperature rangeifm switched-mode power supplies provide the specificnominal power across the entire temperature range.Derating only has to be taken into account above anoperating temperature of 60 °C.
Double terminalAll 24 V switched-mode power supplies are equippedwith double terminals. This simplifies wiring and provides more clarity in the control cabinet.
Dimensions
119,3
354
132,6127,6
123
2
34
5
6
1
N L PE
125
13
14
15
16
124
130,
5
E84016
119
354
130,7127,1
2
34
5
6
1
L1 L2 L3 PE
110
13
14
15
16
124
130,
5
E84036
1) Jumper ”individual / parallel operation“2) Potentiometer 24...28 V DC3) LED DC OK4) LED overload5) Terminals DC OK signal6) Terminal shut-down input
For further technical details please visit: www.ifm.com
Output power / [W]peak
960 /1440
Ambient temperature [°C] -25...70
Display LED 1 x DC OK1 x overload
Shut-downControlled
switch-off of the output voltage
Frequency range [Hz] 47...64
Protection IP 20
Short-circuit proof •
Overload protection •
124
Power supplies
Circuit protectionwith monitoringfunction for the 24 Vsecondary circuitElectronic 24 V DC circuit breakers
Modular and selective protec-tion in plant and machinery
Reliable circuit protection allows reduction of wire cross-sections
Fast replacement using innova-tive connection technology
Detection of triggering cause (via IO-Link)
Current and voltage measurement in each channel(via IO-Link)
Safety on the 24 V sideAs opposed to the 230 V primary side, the circuit protection in the secondary circuit is often neglected. Another issue is that in the event of afailure of the 24 V DC voltage supply standard mechanical circuit breakersoften do not trigger. This may happen with long cables, for example.The electronic circuit breakers from ifm monitor the circuit ideally and, if required, disconnect reliably. Individual branch circuits can be selectivelydisconnected. This allows a reduction of wire cross-sections in the load circuit of the switched-mode power supplies. The system has a modularstructure and can be ideally adapted to the circuits of plant and machinery.The IO-Link version also allows evaluation of important diagnostic data.
125
(04.2016)
For further technical details please visit: www.ifm.com
Modular installationThe system has a modular structure and consists of asupply module to feed max. 40 A. The protection modules can be mounted side by side. This is done viaa simple clip mechanism, completely without anybridges, jumpers or the like.Easy mounting and minimised wiring complexity savecost and time. With the standard version the user canconnect up to 10 and with the IO-Link version up to 8 safety modules to the head module.
VersionsThere is a standard and an IO-Link version. In additionto the triggering mechanism, the modules feature anLED for signalling if the module has triggered, if it is active and to what extent it is utilised. By means of a pushbutton each channel can be activated, deactivated or set. The feed module has an additional collective output toprovide a warning signal if a module has triggered.
More transparency with IO-LinkThe IO-Link version has the same function; there is, however, additional information about each channel:Transfer to the IO-Link master:• effective nominal current (1 byte cyclical)• output voltage (acyclical) • triggering counter (acyclical)• current unit status (1 byte cyclical): – short circuit – overload – undervoltage – limit reached (80 % IN)Transfer from the IO-Link master: • activation/deactivation • reset with triggering • reset triggering counter
The modules are available in the fixed sizes 2 A, 4 A, 6 A, 8 A and 10 A. The fixed current values preventsubsequent misuse by changing the max. current value.
InterfaceInputs
[V DC]
Orderno.
Supply module, standard
–24, 40 A DF1100
Nominal current
[A]
–
Protection module, standard
–– DF12122 x 2
–– DF12142 x 4
–– DF12162 x 6
Operating voltage [V DC] 24 (18...30)
Switch-off characteristics Time-current characteristics
Temperature range [°C] -25...60
Connection technology Push-in incl. pusher
Installation DIN rail
Approvals UL508 listed (in preparation)
Fail-safe element = nominal current (e.g. 4 A = 4 A)
Switch-on capacity 20,000 μF
Switching status indication LEDMulti-colour,
signal contact via feeding module
Further technical data
Supply module, IO-Link
IO-Link24, 40 A DF2100–
Protection module, IO-Link
IO-Link in combinationwith head module– DF22122 x 2
IO-Link in combinationwith head module– DF22142 x 4
IO-Link in combinationwith head module– DF22162 x 6
Accessories
Type Description Orderno.
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols IO-Link (4.8, 38.4 and 230 kBits/s)
E30390
LR DEVICE (supplied on USB flash drive)Software for online and offline parameter setting of IO-Link sensors and actuators
QA0011
–– DF12081 x 8
–– DF12101 x 10
IO-Link in combinationwith head module– DF22081 x 8
IO-Link in combinationwith head module– DF22101 x 10
126
More clarity
For each product group you can makea first selection via the platforms.
A clear visual language and explanatorytexts give you a first impression of theproducts.
Compare products with each other
The selectors are the heart of theproduct search.The displayed selection criteria areadapted to each product range and thetechnical features of the products.The results can be displayed as tiles orlists.
Overview:The ifm product range is clearlystructured and the individual productplatforms ensure quick orientation.
Selectors:Choose between the most importanttechnical data and you will get theproduct selection suitable for yourrequirements.
Compare:You can compare the technical dataof up to 3 products. Differences aremarked in colour.
Search and find:Enter the search term in the full textsearch and get suggestions for pro-ducts, topics and product groups.
Order:We provide a quick-order and csvimport function for the shoppingbasket on the product pages.
The ifmsales platform
127
For all types of display
Whether PC, laptop, tablet or smart-phone – the design of the sales platformadapts to any screen size thus increasinguser-friendliness. This also makes itpossible to buy products using mobileequipment such as a smartphone.
Easy purchasing
You are in control of everything in the
shopping basket: quantity, modes of
shipment and payment. We provide you
with everything you can expect from a
modern shop.
Customers relying on long-standing
tried-and-tested articles can quickly
order by entering the article number in
the shopping basket. This saves time,
in particular when a product has to be
quickly reordered.
Navigation in the menu structure is no
longer necessary.
Try us.Click here to directly get to our homepage:www.ifm.com
ifm a
rtic
le n
o. 7
8002
294
· We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
· Pr
inte
d in
Ger
man
y on
non
-chl
orin
e bl
each
ed p
aper
. 04
/17
Visit our website:www.ifm.com
Position sensors
Sensors formotion control
Industrial imaging
Safety technology
Process sensors
Systems formobile machines
Industrialcommunication
Condition monitoringsystems
Connectiontechnology
Software
Power supplies
AccessoriesIO-Link
years
W
ARRANTY
on ifm products
Identification systems
ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-mail [email protected]