diy coiled bead earrings simple jewelry making instructions
DESCRIPTION
1 step to make coiled beads, 2 steps to hang chain fringe, and then the dainty pair of coiled bead earrings is finished in a few minutes; this is a simple jewelry making project.TRANSCRIPT
DIY Coiled Bead Earrings - Simple Jewelry Making Instructions
I think that coiled beads are very funky and that they can
be applied in many jewelry making projects; this time I
want to put these chic coiled beads into an earring project
and hope you will like it!
Materials and tools:
0.5mm gold copper wire
Gold eye pins
Black iron chains
Iron ear hooks
2mm silvery aluminum wire
8mm purple bicone beads
Round nose pliers
Flat nose pliers
Wire cutters
Instructions:
Step 1: Make coiled beads
1st, pick a 30cm piece of copper wire and coil it around
2mm aluminum wire;
2nd, when the coiling reaches about 4cm, cut off extra
wire;
3rd, the coiled bead is done, and repeat to make another
one.
Step 2: Add chain fringe
1st, pick a piece of copper wire that measures about 10cm
and cut 6 pieces of black chain that measure 4cm;
2nd, wrap its short tail around the long tail after sliding a
purple bicone bead on it;
3rd, slide one 4cm chain on and wrap the long tail to finish
it;
4th, prepare 6 chains of this kind and attach 3 of them to
each coiled bead;
1 step to make coiled beads, 2 steps to hang chain fringe, and then the dainty pair of coiled bead earrings
is finished in a few minutes; this is a simple jewelry making project.
Step 3: finish the chic earrings
Attach ear hooks to the whole dangles. The final look is like this:
Now this simple jewelry making tutorial is done; I love this coiled bead earrings very much; when
coiling wire beads, you’d be sure its diameter is shorter than the eyelet of eye pin, avoiding the
circumstance that the eye pins cannot secure the coiled beads.
Search for more styles of wires for your wire jewelry making, please click:
http://www.pandahall.com/wholesale-Wire/77.html