day 1 sritrusta sukaridhoto. utp 5e cable/patch straight-through
TRANSCRIPT
Day 1
Sritrusta Sukaridhoto
UTP 5e cable/patch
Straight-through
Crossed-over
Tools
Step-by-step (1)
Skin off the jacket Un-twist each pair Place the order Recheck use
diagram
Step-by-step (2)
Hold the grouped Cut straight all of
the wires
Step-by-step (3)
Insert the wires into connector (pin facing up)
Step-by-step (4)
Push moderately hard to assure that all of the wires have reached the end of the connector
Step-by-step (5)
Place the connector into crimp tool, and squeeze hard so that the handle reaches it’s full swing
Step-by-step (6)
Now go and test it !
Wire map
Cisco Cable system
X21
X21
V35
V35
RS232
Connecting Router to ISP (WAN)
ISP
DCE
DTE
DTEDTE
DCEDCE
ISP
Console Cable
Plug it into console port
Plug Console Cable
Serial Cable into Computer at Serial Port
UTP Cable into Console Port at Router
Console C
able
Plug the FO
Prepare the FO Cable
Plug it into Router and Switch
FO C
able
Dial-UP
Plug Modem into PC using Serial Cable
Plug RJ11 Cable into modem and PABX
Use Adaptor as AC-power
PABX
ServerModem
PC Client
ISP
How-to Dial UP
Use Gnome-ppp (Linux), Dialup networking (Windows)
Username : goodle Password : goodle Number to dial : 101
Wireless-LAN
Turn-on WIFI Get ESSID :
“eepishotspot” Get IP Access Internet
Access Point
PC-Tablet
Laptop
Desktop with Wifi Card PDA
LAN
ESSID : eepishotspot