council / government lighting product guide
TRANSCRIPT
Safer, brighter environments
World leading energy efficiency
Reduced maintenance
Adelaide City
Council Case Study
Adelaide City Council has over the past
few years invested into trialling and
evaluating various LED technologies to
help reduce energy use and carbon
emissions. LUCID Consulting Australia have
provided specialist technical expertise and
design support in the evaluation phases
of choosing the best luminaires available
and their suitability in replacing existing
public lighting technologies. As a result the
‘Go Green with Public Lighting’ strategy has
been endorsed by Council and the results
are delivering real world energy savings
and the realisation of sustainability goals
now and for the future.
Advanced Lighting Technologies Australia
supplied The Cree Edge™ Area Round Post
Top ‘Spiders’ for a city wide roll-out
of public lighting.
The Go Green with Public Lighting program
has seen over 700 of Adelaide public lights
changed over to Cree® LED technology
over the last 6 months. The sustainability
achievements of the program have been
far reaching and very well received,
having reduced energy emissions by
approximately 50%, increased public
safety through better lighting performance,
lighting quality and light levels, and
reduced maintenance requirements
through the longer lamp life.
One of the six outcomes in the City of
Adelaide Strategic Plan 2012/16 is to be
an environmentally sustainable City and
contains strategies to reduce carbon
emissions and oil dependency. The
Council endorsed Energy Management
Action Plan 2011/14 has set a target to
reduce energy use by 15% by 2014/15
based on 2009/10 levels and pursue zero
net carbon emissions by 2020. A strategy
within the Energy Management Action
Plan to assist with achieving this goal is
the Go Green with Public Lighting project.
The CREE Edge™ Area Round Post Top
ittings supplied by Advanced Lighting
Technologies Australia have been used
widely throughout the city, ranging from
parks and open spaces, city pathways,
squares, plazas, laneways and local roads.
The ability of CREE’s BetaLED technology
allows for the same itting to achieve
multiple lighting competencies through
its modular LED light engine design, and
ability to select various drive current
settings to vary light output.
Because of the pre-existing infrastructure,
a one for one retroit was required. CREE’s
modular system approach meant a perfect
it could be found maximising energy
savings, whilst improving lighting results.
The majority of the new CREE Edge™
Area Round systems consume 47 watts,
replacing 80W Mercury Vapour, 100W Metal
Halide, & 125W Mercury Vapour lamps.
Not only are the energy savings being
realised, increased light levels are achieved
on the pathways and traficked areas.
The patented LED NanoOptic® system
ensures the generated light from the LED
lamp sources is directed down wards,
eliminating upward light pollution and spill
light. Along with the clear beneits delivered
to areas such as the River Torrens pathways
as pictured, the Cree® LED lamps have a
signiicantly higher life resulting in lower
maintenance costs.
Advanced Lighting Technologies are
one of Australia’s leading commercial
and industrial speciication lighting
solution providers and the Asia Paciic
authorized distributors for Cree® outdoor
luminaires, and have a long and successful
partnership with Cree® over twenty years.
Cree® are the world leaders in LED lighting.
The Cree Edge™ Area Round used in the
Adelaide City Council River Torrens is
an architectural luminaire and ideal for
illuminating any open-space application
including pathways, streets, parks, and car
parks. With a low-proile modular design, this
aesthetically-pleasing luminaire provides
improved illumination performance while
reducing energy consumption.
This innovative project demonstrates Council’s commitment to a sustainable and environmentally-friendly cityLord Mayor Stephen
• Low proile modular design
• Die-cast, spun and extruded
aluminium housing assembly
• Two-level options
• Optional backlight cut-off shielding
They are a shining light for sustainability and will provide high-quality and consistent white light, adding to the vibrancy and
safety of city streets.Lord Mayor Stephen Yarwood
Our round design option is ideal for illuminating a variety of applications for pedestrians
and motorists including pathways, parks and parking lots.
A greener choice for public lighting
The CREE Edge™ Area Round delivers energy
reductions of between 35% – 65% for Adelaide
public lighting applications.
THE EDGE architectural area round luminaires
are ideal for illuminating any open-space
application including pathways, parks and
parking lots.
The XSP Series is made possible by innovation in every aspect of the product to deliver
outstanding illumination, lasting performance and optimum energy eficiency.
• Energy eficient
• Long life
• Minimal servicing
• Utilizes betaLED technology
• NanoOptic® Precision Delivery Grid™ optic
• CRI: minimum 70 CRI
• CCT: 4000k (+/- 300k), 5700k (+/- 500k)
The best alternative totraditional street lighting
XSP Series
Designed from the bottom up as a totally
optimised LED street light system, the XSP
Series delivers incredible eficiency of up to
100 lumens per watt and up to double the
lumens per dollar of previous generations
of LED street lights without sacriicing
application performance. Featuring three
variations- XSP1, XSP2 and XSP2L, the XSP
series is an ideal replacement for outdated
high pressure sodium ixtures and can even
provide increased value to displace higher
wattage applications (up to 400W).
Beyond substantial energy savings (nearly
50%) and reduced maintenance, Cree®
achieves better optical control with our
NanoOptic® Precision Delivery Grid™ optic
than a traditional high pressure sodium.
The XSP series also features the same
aesthetics as a traditional cobrahead
luminaire making it easier to upgrade
incumbent technologies for both
replacement and new construction
applications. The Cree® XSP Series LED
Street Light is the best alternative for
traditional street lighting with better
payback, better performance and
better price.
All of this adds up to a street light that pays
for itself, then starts paying you – allowing
municipalities to focus their resources
where it matters most.
New Precision Delivery
Grid Optics
A NanoOptic® Precision Delivery Grid™
optic eficiently delivers light where you
need it, not where you don’t. Cree®
innovation in LED and optic technologies
created a 15% improvement in overall
optical eficiency compared to previous
generations of Cree® LED street lights.
Communities appear cleaner and safer
with uniform, white light.
Setting a new bar for price and performance.
Extended life rating without
the need for maintenance.
LEDway
Engineered for energy eficiency and
environmental sustainability, LEDway is a
versatile, high-performance street lighting
solution designed speciically for street
and roadway applications.
Cree® continues to raise the bar on
performance and lower the total cost
of ownership delivering higher value to
municipalities and facility managers.
LEDway can be optimised for both new
construction and upgrades lowering both
initial cost and overall lifetime cost.
LEDway streetlights are built to the exact
standards required by your application.
With more than 20 optical distributions,
lexible drive currents, numerous optional
features, and the option to choose from up
to 120 LEDs in 10 LED increments, we offer
the most versatile streetlight on the market.
The proprietary technology within LEDway
streetlights creates safer conditions for
motorists and pedestrians by producing
a whiter light with better uniformity.
Easily retroit onto existing mounting
systems, making it simple and affordable
to invest in state-of-the-art technology.
The versatile street lighting solution
Dramatically improve uniformity eliminating dark spots between ixtures creating a safer
environment for vehicle and pedestrian trafic.
• Engineered for energy eficiency
and environmental sustainability
• A versatile, high-performance street
lighting solution
• Easily retroit onto existing
mounting systems
• International Dark Sky Association
Compliant
Improving visibility
reducing light pollution.
Proper thermal management is
the key to maximum sustained
illumination performance.
LEDway
SLM
With more available options, the LEDway
SLM IP66, an IP66 rated version of the
LEDway SLM, can be mounted to a vertical
or horizontal tenon for increased lexibility.
Product options include an occupancy
sensor, dimming capabilities and painted
extrusion.
LEDway SLM IP66 are sleek, low proile LED
luminaires designed to replace existing
traditional cobrahead systems along
residential streets.
Both products incorporate scalable light
modules designed to replace 70W – 250W
high-pressure sodium cobraheads and
feature NanoOptic® product technology
to deliver industry leading target lighting
performance.
The limitations of a luminaire should
not dictate the success of your street
lighting project. LEDway streetlights are
available in a variety of optical and
power conigurations allowing for precise
balancing of illumination and economic
performance.
Energy savings from LEDway streetlights,
for typical street lighting applications,
is generally 30% – 70% compared to
traditional HID systems. Networked or
non-networked lighting controls can
be added to further enhance overall
energy savings.
A low proile LED street light
LED streetlights reduce the amount of energy used and ultimately help to reduce the
carbon footprint of your municipality.
• Vertical or horizontal tenon mount
• Tool-less entry
• Surge suppression rated up to 10 kv
• ±5º vertical adjustment w/ 2 ½º steps
• Bubble level
• Modular design
• Die-cast and extruded aluminium housing
Invest in sustainability
The Edge™ Pathway combines style and
performance to provide unmatched
value in pathway and pedestrian lighting.
Available in a range of lengths, Cree Edge™
Pathway provides shadow-free illumination
in both symmetric and asymmetric
distribution patterns. In addition, its lens-free
design means no yellowing lens or other
lens-related issues that can be typical
of more traditional designs. Cree Edge™
Pathway is simply designed to provide more
than a decade of near maintenance-free
service.
Delivering outstanding shadow free
illumination, lasting performance and
optimum energy eficiency.
A pathway to
style and performance
Shadow-free illumination
XBP Series
• Improved illumination performance
• Signiicant energy and maintenance
savings
• Eliminate the relamping cycle
• Standard 10 year limited warranty
• Two-level options
• Minimum 70 CRI
• CCT: 4000K (+/-300K), 5700K (+/-500K)
Nothing speaks to security like reliability.
The XSP LED Wall Pack leverages Cree’s
innovative technology, developed for
the industry-leading XSP street lights,
offering customers a premier site lighting
solution that incorporates exceptional
thermal management with high-quality
components and an unmatched paint
inish, making Cree® LED solutions highly
reliable. The result is an LED system capable
of providing more than a decade of near
maintenance-free service.
Site Safety with Low Cost of Ownership.
A cutting edge
security luminaire
A well lit environment
is a safer environment
XSP Series
• 2 light outputs:
25W – 2529/2722 lumens
42W – 3819/4109 lumens
• CCT: 4000K (+/- 300K), 5700K (+/- 500K)
• Up to 100 lumens/watt
• Type II and Type III distribution
• L70 100,000 hrs @25˚C
• Exclusive Colorfast DeltaGuard® Finish
Advanced Lighting Technologies
Asia Pte Ltd
Block 4008, Ang Mo Kio Avenue 10
#04-06, Techplace I
SINGAPORE 569625
T : +65 6844 2338
F: +65 6844 2339
www.adlt.com.sg
Advanced Lighting Technologies
Australia Inc
110 Lewis Road
Wantirna South, Victoria
AUSTRALIA 3152
T : +61 03 9800 5600
F: +61 03 9800 5533
www.adlt.com.au
Advanced Lighting Technologies
New Zealand Ltd
8 Boeing Place
Mount Maunganui
NEW ZEALAND
T: +64 07 579 0163
F: +64 07 579 0164
www.adlt.co.nz