cordless hydraulic cable cutters % 0
TRANSCRIPT
Contact wire cut with a traditionalcutter
C o n t a c t w i r e c u t w i t hthe B35MTFCE tool
FTGW100 FTGW120 FTGW150
MFCAC100 MFCAC120 MFCBC107
MFCBC150 MFCD10.8 MFCD14.5
MFCD16.1 MFCD7.5S
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
for profiled contact wires
Cordless hydraulic cutting tool B35MTFCE with interchangeabledies to perform a perfectly perpendicular cut without deformationof the wire shape.
Hydraulic cutting head for cutting profiled contact wires and copperand aluminium ropes. Interchangeables dies cut perpendicularly andwithout deformation to optimise joint installation.
The use of this head simplifies the cutting operation and reduces the time needed to prepare the joint.
Simple 3 stage operation
Insert the dies e t i n t o t h ehead
Pos i t i on t heconductorinside the dieset so that theblade lines upw i t h t h edesired cuttingpoint; close thed i e s e t b ym o v i n g t h elockinghandle towardsthe tool body,untilautomatically“ l o c k e d ” i npos i t ion andsecurelyclamping thewire/conductor.
Ope r a t e t h ep u m p t oadvance theb l a d e t othe conductor;t h e b l a d eprogressivelyadvances untilthe conductoris completelyc u t i n ac l e a n a n dprecise mannerwithoutdeformingthe conductoritself.
The B 35MTFCE is a cordless tool that can be operated with one hand.
Suitable for cutting profiled contact wires, on electrified traction systems.
Balanced tool for greater control
Head rotates 180° for ease of operation in confined spaces.
Fitted with a maximum pressure valve.
Automatic return of dies after completion of the cut.
Automatic return can be stopped at any time to ease positioning.
Extremely quiet, minimal vibration.
Durable moulded body offering high resistance to wear and damage in all operating conditions.
NiMH battery; powerful, better environmental compatibility.
Battery condition displayed after every cutting operation and after any battery insertion to show the residualbattery power.
Supplied in a robust plastic case to accommodate the tool and all the accessories.
Two batteries and AC charger included.
Supplied in a sturdy plastic case VAL P43 suitable for storage of the tool and 4 sets of dies.
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
Technical characteristics
PROPERTIES
Nominal pressure 450 bar
Battery material LiIon
Battery voltage 18 V
Battery current 2 Ah
Length 385 mm
Width 195 mm
Height 133 mm
Weight with battery 3.4 kg
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
In the same kit
Tools
Batteries CB LiIon high power battery CB1820L
Battery charger ASC3036 ASC3036 UK 27045000
Products used together
Through connectors
CONNECTING JOINTS FOR PROFILED CONTACT WIRES FTGW
Nest
Cutting die sets MFC
1
http://www.cembre.com/product/details/43042
Contact wire cut with a traditionalcutter
C o n t a c t w i r e c u t w i t hthe B35MTFCE tool
FTGW100 FTGW120 FTGW150
MFCAC100 MFCAC120 MFCBC107
MFCBC150 MFCD10.8 MFCD14.5
MFCD16.1 MFCD7.5S
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
for profiled contact wires
Cordless hydraulic cutting tool B35MTFCE with interchangeabledies to perform a perfectly perpendicular cut without deformationof the wire shape.
Hydraulic cutting head for cutting profiled contact wires and copperand aluminium ropes. Interchangeables dies cut perpendicularly andwithout deformation to optimise joint installation.
The use of this head simplifies the cutting operation and reduces the time needed to prepare the joint.
Simple 3 stage operation
Insert the dies e t i n t o t h ehead
Pos i t i on t heconductorinside the dieset so that theblade lines upw i t h t h edesired cuttingpoint; close thed i e s e t b ym o v i n g t h elockinghandle towardsthe tool body,untilautomatically“ l o c k e d ” i npos i t ion andsecurelyclamping thewire/conductor.
Ope r a t e t h ep u m p t oadvance theb l a d e t othe conductor;t h e b l a d eprogressivelyadvances untilthe conductoris completelyc u t i n ac l e a n a n dprecise mannerwithoutdeformingthe conductoritself.
The B 35MTFCE is a cordless tool that can be operated with one hand.
Suitable for cutting profiled contact wires, on electrified traction systems.
Balanced tool for greater control
Head rotates 180° for ease of operation in confined spaces.
Fitted with a maximum pressure valve.
Automatic return of dies after completion of the cut.
Automatic return can be stopped at any time to ease positioning.
Extremely quiet, minimal vibration.
Durable moulded body offering high resistance to wear and damage in all operating conditions.
NiMH battery; powerful, better environmental compatibility.
Battery condition displayed after every cutting operation and after any battery insertion to show the residualbattery power.
Supplied in a robust plastic case to accommodate the tool and all the accessories.
Two batteries and AC charger included.
Supplied in a sturdy plastic case VAL P43 suitable for storage of the tool and 4 sets of dies.
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
Technical characteristics
PROPERTIES
Nominal pressure 450 bar
Battery material LiIon
Battery voltage 18 V
Battery current 2 Ah
Length 385 mm
Width 195 mm
Height 133 mm
Weight with battery 3.4 kg
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
In the same kit
Tools
Batteries CB LiIon high power battery CB1820L
Battery charger ASC3036 ASC3036 UK 27045000
Products used together
Through connectors
CONNECTING JOINTS FOR PROFILED CONTACT WIRES FTGW
Nest
Cutting die sets MFC
2
http://www.cembre.com/product/details/43042
Contact wire cut with a traditionalcutter
C o n t a c t w i r e c u t w i t hthe B35MTFCE tool
FTGW100 FTGW120 FTGW150
MFCAC100 MFCAC120 MFCBC107
MFCBC150 MFCD10.8 MFCD14.5
MFCD16.1 MFCD7.5S
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
for profiled contact wires
Cordless hydraulic cutting tool B35MTFCE with interchangeabledies to perform a perfectly perpendicular cut without deformationof the wire shape.
Hydraulic cutting head for cutting profiled contact wires and copperand aluminium ropes. Interchangeables dies cut perpendicularly andwithout deformation to optimise joint installation.
The use of this head simplifies the cutting operation and reduces the time needed to prepare the joint.
Simple 3 stage operation
Insert the dies e t i n t o t h ehead
Pos i t i on t heconductorinside the dieset so that theblade lines upw i t h t h edesired cuttingpoint; close thed i e s e t b ym o v i n g t h elockinghandle towardsthe tool body,untilautomatically“ l o c k e d ” i npos i t ion andsecurelyclamping thewire/conductor.
Ope r a t e t h ep u m p t oadvance theb l a d e t othe conductor;t h e b l a d eprogressivelyadvances untilthe conductoris completelyc u t i n ac l e a n a n dprecise mannerwithoutdeformingthe conductoritself.
The B 35MTFCE is a cordless tool that can be operated with one hand.
Suitable for cutting profiled contact wires, on electrified traction systems.
Balanced tool for greater control
Head rotates 180° for ease of operation in confined spaces.
Fitted with a maximum pressure valve.
Automatic return of dies after completion of the cut.
Automatic return can be stopped at any time to ease positioning.
Extremely quiet, minimal vibration.
Durable moulded body offering high resistance to wear and damage in all operating conditions.
NiMH battery; powerful, better environmental compatibility.
Battery condition displayed after every cutting operation and after any battery insertion to show the residualbattery power.
Supplied in a robust plastic case to accommodate the tool and all the accessories.
Two batteries and AC charger included.
Supplied in a sturdy plastic case VAL P43 suitable for storage of the tool and 4 sets of dies.
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
Technical characteristics
PROPERTIES
Nominal pressure 450 bar
Battery material LiIon
Battery voltage 18 V
Battery current 2 Ah
Length 385 mm
Width 195 mm
Height 133 mm
Weight with battery 3.4 kg
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
In the same kit
Tools
Batteries CB LiIon high power battery CB1820L
Battery charger ASC3036 ASC3036 UK 27045000
Products used together
Through connectors
CONNECTING JOINTS FOR PROFILED CONTACT WIRES FTGW
Nest
Cutting die sets MFC
3
http://www.cembre.com/product/details/43042
Contact wire cut with a traditionalcutter
C o n t a c t w i r e c u t w i t hthe B35MTFCE tool
FTGW100 FTGW120 FTGW150
MFCAC100 MFCAC120 MFCBC107
MFCBC150 MFCD10.8 MFCD14.5
MFCD16.1 MFCD7.5S
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
for profiled contact wires
Cordless hydraulic cutting tool B35MTFCE with interchangeabledies to perform a perfectly perpendicular cut without deformationof the wire shape.
Hydraulic cutting head for cutting profiled contact wires and copperand aluminium ropes. Interchangeables dies cut perpendicularly andwithout deformation to optimise joint installation.
The use of this head simplifies the cutting operation and reduces the time needed to prepare the joint.
Simple 3 stage operation
Insert the dies e t i n t o t h ehead
Pos i t i on t heconductorinside the dieset so that theblade lines upw i t h t h edesired cuttingpoint; close thed i e s e t b ym o v i n g t h elockinghandle towardsthe tool body,untilautomatically“ l o c k e d ” i npos i t ion andsecurelyclamping thewire/conductor.
Ope r a t e t h ep u m p t oadvance theb l a d e t othe conductor;t h e b l a d eprogressivelyadvances untilthe conductoris completelyc u t i n ac l e a n a n dprecise mannerwithoutdeformingthe conductoritself.
The B 35MTFCE is a cordless tool that can be operated with one hand.
Suitable for cutting profiled contact wires, on electrified traction systems.
Balanced tool for greater control
Head rotates 180° for ease of operation in confined spaces.
Fitted with a maximum pressure valve.
Automatic return of dies after completion of the cut.
Automatic return can be stopped at any time to ease positioning.
Extremely quiet, minimal vibration.
Durable moulded body offering high resistance to wear and damage in all operating conditions.
NiMH battery; powerful, better environmental compatibility.
Battery condition displayed after every cutting operation and after any battery insertion to show the residualbattery power.
Supplied in a robust plastic case to accommodate the tool and all the accessories.
Two batteries and AC charger included.
Supplied in a sturdy plastic case VAL P43 suitable for storage of the tool and 4 sets of dies.
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
Technical characteristics
PROPERTIES
Nominal pressure 450 bar
Battery material LiIon
Battery voltage 18 V
Battery current 2 Ah
Length 385 mm
Width 195 mm
Height 133 mm
Weight with battery 3.4 kg
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
In the same kit
Tools
Batteries CB LiIon high power battery CB1820L
Battery charger ASC3036 ASC3036 UK 27045000
Products used together
Through connectors
CONNECTING JOINTS FOR PROFILED CONTACT WIRES FTGW
Nest
Cutting die sets MFC
4
http://www.cembre.com/product/details/43042
Contact wire cut with a traditionalcutter
C o n t a c t w i r e c u t w i t hthe B35MTFCE tool
FTGW100 FTGW120 FTGW150
MFCAC100 MFCAC120 MFCBC107
MFCBC150 MFCD10.8 MFCD14.5
MFCD16.1 MFCD7.5S
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
for profiled contact wires
Cordless hydraulic cutting tool B35MTFCE with interchangeabledies to perform a perfectly perpendicular cut without deformationof the wire shape.
Hydraulic cutting head for cutting profiled contact wires and copperand aluminium ropes. Interchangeables dies cut perpendicularly andwithout deformation to optimise joint installation.
The use of this head simplifies the cutting operation and reduces the time needed to prepare the joint.
Simple 3 stage operation
Insert the dies e t i n t o t h ehead
Pos i t i on t heconductorinside the dieset so that theblade lines upw i t h t h edesired cuttingpoint; close thed i e s e t b ym o v i n g t h elockinghandle towardsthe tool body,untilautomatically“ l o c k e d ” i npos i t ion andsecurelyclamping thewire/conductor.
Ope r a t e t h ep u m p t oadvance theb l a d e t othe conductor;t h e b l a d eprogressivelyadvances untilthe conductoris completelyc u t i n ac l e a n a n dprecise mannerwithoutdeformingthe conductoritself.
The B 35MTFCE is a cordless tool that can be operated with one hand.
Suitable for cutting profiled contact wires, on electrified traction systems.
Balanced tool for greater control
Head rotates 180° for ease of operation in confined spaces.
Fitted with a maximum pressure valve.
Automatic return of dies after completion of the cut.
Automatic return can be stopped at any time to ease positioning.
Extremely quiet, minimal vibration.
Durable moulded body offering high resistance to wear and damage in all operating conditions.
NiMH battery; powerful, better environmental compatibility.
Battery condition displayed after every cutting operation and after any battery insertion to show the residualbattery power.
Supplied in a robust plastic case to accommodate the tool and all the accessories.
Two batteries and AC charger included.
Supplied in a sturdy plastic case VAL P43 suitable for storage of the tool and 4 sets of dies.
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
Technical characteristics
PROPERTIES
Nominal pressure 450 bar
Battery material LiIon
Battery voltage 18 V
Battery current 2 Ah
Length 385 mm
Width 195 mm
Height 133 mm
Weight with battery 3.4 kg
CORDLESS HYDRAULIC CABLE CUTTERS B35MTFCE
In the same kit
Tools
Batteries CB LiIon high power battery CB1820L
Battery charger ASC3036 ASC3036 UK 27045000
Products used together
Through connectors
CONNECTING JOINTS FOR PROFILED CONTACT WIRES FTGW
Nest
Cutting die sets MFC
5
http://www.cembre.com/product/details/43042