commissioning and integration flexi multi radio
DESCRIPTION
NSN commisioningTRANSCRIPT
![Page 1: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/1.jpg)
1 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Flexi Multiradio BTS Commissioning and Integration
![Page 2: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/2.jpg)
2 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Content
Preparing for Commissioning
2G Flexi BTS Manager
Commissioning Types
Creating SCF File (Offline)
Local Commissioning
Demonstration
![Page 3: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/3.jpg)
3 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for Commissioning
![Page 4: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/4.jpg)
4 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for CommissioningCommissioning Prerequisite (1/2)
• Before commissioning, the physical installation of the BTS (modules, cabling, antennas and radios) must be completed.
• Make sure a PC with 2G Flexi BTS Site Manager installed.
• One 10/100 Mbit/s Ethernet cable needed for the connection between the BTS and user PC.
• Parameter values must be available to be entered during commissioning. The parameter values are provided by the network planning process.
• BSC settings: the BTS site must already be created at the BSC for commissioning to be successfully completed.
![Page 5: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/5.jpg)
5 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for CommissioningCommissioning Prerequisites (2/2)
• Transmission network setup: the transmission link(s) between the BSC and the BTS must already be set up so that there is a transmission path from the BSC to the BTS for all the Abis channels.
• If there are any intermediate transmission hubs between the BSC and the BTS, the cross connections in the hubs should either be set up at the E1/T1 link level, or at the n x 64 kbit/s level for all the channels to the BTS in an E1/T1 link.
• With the Flexi transmission interface Flexbus sub-module (FIFA), the transmission link will be established during commissioning.
Screenshots included are representations and should be considered as examples only. The current release of the 2G Flexi BTS Site Manager software may differ slightly from the shots depicted
![Page 6: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/6.jpg)
6 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for CommissioningVisual Check Inspections
• Perform the first part of the visual check before powering on the BTS at the power system.
• Check the equipment visually to see that there are no fatal installation errors, which might lead to equipment damage during the power on, such as
– the grounding– power cabling and supply voltage– other cables and fibres– LED status during power up– TX/RX/antenna connector torque check– Flexbus cables (used with FIFA)– LAN cable (used with the E1 transmission card)– LAN cables (used for TDM or Fast Ethernet transmission with FIPA, FIEA, FIQA,
FIYA)– Optical fibres (used for Gigabit Ethernet transmission with FIQA, FIYA)
• When all is proven to be OK, perform the 'Power on' check and verify the LED status.
![Page 7: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/7.jpg)
7 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for CommissioningInstalling the 2G Flexi BTS Site Manager (1/4)
• Software needed in order to do commissioning/ supervising the Flexi Mutiradio is 2G Flexi BTS Site Manager (mandatory) and Flexi Hub manager (if FIFA is used).
• Both Software can be downloaded via NOLS.
• Please ensure that both manager software must be compatible with the software level installed in the BTS.
• User can check the compatibility at Software compatibility of Flexi Multiradio BTS document in NED.
![Page 8: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/8.jpg)
8 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for CommissioningInstalling the 2G Flexi BTS Site Manager (2/4)
• Check the system requirement of the PC before install the site manager
![Page 9: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/9.jpg)
9 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for CommissioningInstalling the 2G Flexi BTS Site Manager (3/4)
• Install the 2G Flexi BTS Manager and follow the instruction on the installing wizard.
• On successful completion of installation shortcuts will be created on your desktop and in the Start menu to launch the 2G Flexi BTS Site Manager.
![Page 10: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/10.jpg)
10 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Preparing for CommissioningInstalling the 2G Flexi BTS Site Manager (4/4)
• On successful completion of installation shortcuts will be created on your desktop and in the Start menu to launch the 2G Flexi BTS Site Manager.
Note:1.On certain computers, you may also be required to restart your computer before running the application.2. Re-installing the same version of the product will over-write the previous configuration with the default settings.
![Page 11: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/11.jpg)
11 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
2G Flexi BTS Manager
![Page 12: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/12.jpg)
12 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
2G Flexi BTS ManagerMain window
• To launch the 2G Flexi BTS Manager user can click shortcuts in the Start Menu, and following window will come up.
For commissioning/ supervison if PC connect dircctly to BTS
For re-commissioning/ supervison if PC connect BTS via NetAct (remotely)
For creating the SCF or EasyWizard Template if PC connect BTS offline (PC not connected to BTS)
For help
List of release package and 2G Flexi BTS Site Manager versions
List of release package and 2G Flexi BTS Site Manager versions
![Page 13: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/13.jpg)
13 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
2G Flexi BTS ManagerMain window – Local Connection
• By clicking the Local connection option, then come this following window
IP Address of ESMB/C
As defult: no password, just left this box blank
For detail see comissioning process part
![Page 14: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/14.jpg)
14 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
2G Flexi BTS ManagerMain window – Local Connection
• By clicking the Remote connection option, then come this following window:
Mandatory to fill
![Page 15: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/15.jpg)
15 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
2G Flexi BTS ManagerMain window – Local Connection
• By clicking the Create File option, then come this following window:
Release packages and 2G Flexi BTS
Site Manager versions
For detail see Creating SCF file offline
![Page 16: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/16.jpg)
16 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
2G Flexi BTS ManagerMain window – Local Connection
• By clicking the Tool option, then come this following window:
Available tools (help for BTS Site Manager)
![Page 17: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/17.jpg)
17 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
2G Flexi BTS ManagerMain window – Local Connection
• By clicking the Tool option, then come this following window:
List of installed Release packages and 2G Flexi BTS Site manager version
![Page 18: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/18.jpg)
18 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Commissioning Types
![Page 19: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/19.jpg)
19 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Commissioning typesCommissioning Process Goal (1/2)
• The commissioning process is divided into 4 different commissioning processes depending on the connection and commissioning statuses:
– BTS is not connected: The user intends to create SCF file or an EasyWizard template.
– BTS is connected and uncommissioned: The user wants to bring up the BTS in functional state. He can either use an EasyWizard like template or can specify the settings manually
– BTS is connected and commissioned: The user wants to upgrade the configuration or can change the configuration. This may either simply append in existing configuration or may lead to recommissioning of BTS based on the new settings to be upgraded or changed.
– BTS is connected remotely and commissioned: The user wants to upgrade the configuration or can change the configuration. This may either simply append in existing configuration or may lead to recommissioning of BTS based on the new settings to be upgraded or changed.
![Page 20: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/20.jpg)
20 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Commissioning typesCommissioning Process Goal (2/2)
• The possible ways to perform commissioning process are: – Use existing SCF (Site Configuration File)
– Upload SCF from BTS
– Create SCF by manual commissioning using Commissioning Wizard
• Note: User should not modify the Site Configuration File by using XML editor. Only the BTS Manager should be used to change any values in SCF.
• The Commissioning Wizard will guide user through configuration. By clicking "next" button the wizard will continue to the next configuration screen
• The wizard consist following screen:– Site specific Information
– Hardware Configuration
– Transmission Parameter
![Page 21: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/21.jpg)
21 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Commissioning TypesBTS is not connected
![Page 22: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/22.jpg)
22 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Commissioning TypesBTS connected-uncommissioned
![Page 23: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/23.jpg)
23 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Commissioning Types BTS connected-commissioned
![Page 24: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/24.jpg)
24 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Commissioning Types BTS connected remotely-commissioned
![Page 25: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/25.jpg)
25 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Creating SCF File (Offline)
![Page 26: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/26.jpg)
26 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Creating SCF File (Offline)Select Create File from main window
• If the BTS is not connected the user intends to create SCF file or an EasyWizard template.
• From the 2G Flexi BTS Site Manager main window choose Create File select packages and 2G Flexi BTS Site Manager versions in the dropdown menu click “create” button:
1
2
3
![Page 27: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/27.jpg)
27 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Creating SCF File (Offline)Commissioning menu
![Page 28: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/28.jpg)
28 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Creating SCF File (Offline)Create EasyWizard Hardware & Transmission template
The file created will be with extension .epb
The file created will be with extension .ept
![Page 29: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/29.jpg)
29 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Creating SCF File (Offline)Create SCF (Complete SCF)
The file created will be with
extension .xml
The file created will be with
extension .xml
![Page 30: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/30.jpg)
30 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning
![Page 31: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/31.jpg)
31 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningIP Setup for Local Commissioning PC
• Connect via LMP on ESMx using ethernet cable
• Setup the local IP address on PC under Internet Protocol (TCP/IP) properties as follow:
IP address: 192.168.255.130
Subnet Mask: 255.255.255.128
Default Gateway: none
• Personal Firewall may need to allow access to local network
eg ZoneAlarm
• The default settings of the BTS are:
IP address: 192.168.255.131
2G Flexi BTS Site Manager connection TCP Port: 27500
• 2G Flexi BTS Site Manager SW download via TCP Port: 27501
![Page 32: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/32.jpg)
32 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Flexi 2G BTS Site Manager (1/2)
• Nokia Siemens Networks 2G Flexi BTS Site Manager allows the BTS operators to
– Commission
– Configure
– Monitor the BTS
• These tasks are performed with option:– at the BTS site (known as Local
Connection)
– via communication from the NMS system.
– BSC site (known as Remote Connection).
• 2G Flexi BTS Site Manager is for maintaining and commissioning Flexi Multiradio base transceiver stations.
![Page 33: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/33.jpg)
33 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Flexi 2G BTS Site Manager (2/2)
Local Connection directly to Flexi Multiradio BTS
GSM/EDGE
Remote Connection via NetAct
Create file (commissioning file
IP address of System Module, and Password
just keep empty
Create File is to create the template or SCF
![Page 34: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/34.jpg)
34 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningLocal Connection
![Page 35: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/35.jpg)
35 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Flexi 2G BTS Site Manager window
The main functions of Flexi BTS manager are: • BTS
commissioning• BTS supervision• BTS maintenance• BTS testing
In main menu, the view are:• Alarms• Base Station• Commissioning• Supervision• Transmission• Tests
Navigation bar
Logical BTS view
Properties
Alarms view
Connection feeedback
![Page 36: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/36.jpg)
36 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningCommissioning Wizard
Select the Commissioning → Wizard menu item or click the Commissioning
button on the View Selection Bar.
![Page 37: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/37.jpg)
37 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningUndo Commissioning (1/4)
• to revert the site to un-commissioned mode and he can also check the option that whether user wants to erase bypass capacity along with it or no.
• This button is disabled in remote
connection
![Page 38: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/38.jpg)
38 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningUndo Commissioning (2/4)
![Page 39: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/39.jpg)
39 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningUndo Commissioning (3/4)
Indicate the BTS has successfully uncommissioned
![Page 40: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/40.jpg)
40 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Undo Commissioning (4/4)
• If the BTS is in un-commissioned mode, the connecting RF module is not automatically detected
• Connecting RF module will be detected if the BTS has been commissioned
![Page 41: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/41.jpg)
41 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Commissioning Manually
• In this example, user do commissining manually
![Page 42: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/42.jpg)
42 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Commissioning Manually - Procedure
• Site Specific Information
• Hardware Configuration
• Module Configuration
• Local Sector Settings
• Antenna Settings• RET Setting
• FRM EAC Settings
• Battery Backup Unit
• Other Passive Units
• Transmission parameter
• Physical Setting
• LIF Settings
• Synchronization
• Abis Termination• Abis Allocation
• Abis Protection
• Cross Connection
• Q1 Management
![Page 43: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/43.jpg)
43 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Navigation tree - Enables
user to navigate any screen, and update/view parameters
corresponding to that screen.
Data persistence is
maintained across screen navigations
Local Commissioning Site Specific Information
Navigation tree - Enables
user to navigate any screen, and update/view parameters
corresponding to that screen.
Data persistence is
maintained across screen navigations
![Page 44: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/44.jpg)
44 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Hardware Configuration
• If user has hardware template file (.epb or SCF file), specify from file can be selected
• In this example specify manually is selected
![Page 45: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/45.jpg)
45 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Hardware Configuration – Module Configuration
configure various radio modules, synchronization master, and radio masters
![Page 46: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/46.jpg)
46 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningHardware Configuration – Local Sector setting
configure and associate antennas of only one type of RF unit (RM) to a particular local sector and specify per TRX power
![Page 47: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/47.jpg)
47 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Hardware Configuration – Antenna Settings
Select the antenna line settings, specify MHA settings, provide information for feeder voltage, feeder loss, VSWR minor and major limits for the selected antenna
![Page 48: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/48.jpg)
48 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
User can change the Received Signal Strength Indicator (RSSI) sample count
Local Commissioning Hardware Configuration – Antenna monitoring parameters
![Page 49: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/49.jpg)
49 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
configuration of RETs in either online or offline mode
Local Commissioning Hardware Configuration – RET settings
![Page 50: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/50.jpg)
50 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Hardware Configuration – RFM EAC settings
configure the external alarm lines associated with the individual FRMs
![Page 51: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/51.jpg)
51 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningHardware Configuration – Battery Backup Unit
Enter the battery backup unit parameters
![Page 52: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/52.jpg)
52 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningHardware Configuration – Passive Units
Enter the passive unit parameters
![Page 53: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/53.jpg)
53 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningTransmission Parameter
• If user has transmission template file (.ept or SCF file), specify from file can be selected
• Upload from BTS used if user want to oads the transmission configuration from the BTS and which can then be edited by the user, if required
• In this example specify manually is selected
![Page 54: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/54.jpg)
54 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningTransmission Parameter – Physical settings
• Setting the functionality of interface (E1 or T1)
![Page 55: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/55.jpg)
55 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Transmission Parameter – LIF Setting
• Setting the use interface settings, modify the CRC (if required) and name of the interface
![Page 56: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/56.jpg)
56 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningTransmission Parameter – Synchronization (Source)
• Select the E1 for synchronizaton reference and modify the priority of the reference synchronization among defined E1
![Page 57: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/57.jpg)
57 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningTransmission Parameter – Synchronization (Protection)
• Define the topology (default is Chain)
• user can define the synchronization protection if the topology is Loop
![Page 58: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/58.jpg)
58 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningTransmission Parameter – Synchronization (Output)
user can enable or disable the 2MHz clock output from one BTS, to be used as the synchronization source for any other connected BTS.
![Page 59: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/59.jpg)
59 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Transmission Parameter – Abis Termination
• In Satellite Abis, specify if there is a satellite circuit in the link between the BTS and the BSC
• Enable Abis Signal Mapping allows the BSC to dynamically provide the Abis allocations (TRXSIG, TCH, EDAP) for a BTS
• If Allow Abis Allocations from BTS Manager is thicked (enabled), user can allocate the Abis allocations from the BTS Manager but these allocations can be overridden by the BSC
![Page 60: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/60.jpg)
60 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Transmission Parameter – Abis Allocation
• Enter the Abis Allocation parameters (OMUSIG, TRXSIG, TCH and EDAP)
• If Enable Abis Signal Mapping is chosen, only OMUSIG can be specified, the rest will be mapping by the BSC
• If Enable Abis Signal Mapping is chosen and Allow Abis Allocations from BTS Manager is thicked , all signaling can be allocated in Abis, but these allocations can be overridden by the BSC
![Page 61: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/61.jpg)
61 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningTransmission Parameter – Abis Protection
• If Loop topology is used, Abis protection can be defined
![Page 62: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/62.jpg)
62 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningTransmission Parameter – Cross Connection
![Page 63: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/63.jpg)
63 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningCross Connection – Q1 Management
![Page 64: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/64.jpg)
64 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningFlexhub
•User need to install the FlexiHub Manager beforehand
![Page 65: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/65.jpg)
65 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningSCF preview - Summary
• From this summary, user can check whether the commissioing step has been completed.
• This can be checked by looking at the indication color of each step, green means ok, red means not complete
![Page 66: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/66.jpg)
66 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning SCF preview - Detail
![Page 67: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/67.jpg)
67 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningViewing the commissioning progress and the commissioningresult
![Page 68: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/68.jpg)
68 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningCommissioning completeted
![Page 69: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/69.jpg)
69 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Commissioning Report
Executive Summary
Detail Report
Old
est
![Page 70: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/70.jpg)
70 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local CommissioningExample if the TRX test is failed
![Page 71: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/71.jpg)
71 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning BCF Object after commissioning
![Page 72: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/72.jpg)
72 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Cell Object after commissioning
![Page 73: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/73.jpg)
73 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning TRX Object after commissioning
![Page 74: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/74.jpg)
74 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Tracing the traffic during the test call
• From the toolbar select Test menu select Traffic trace select cell would be traced --> click Automatic Update (if necessary)
• For the CS call, yellow color indicates the RTSL that being occupied
![Page 75: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/75.jpg)
75 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Fetch SCF from BTS
• From the toolbar select Commissioningmenu select Fetch SCF from BTS Save the SCF file (.xml) in local PC
![Page 76: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/76.jpg)
76 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Fetch the commissioning report
• From the toolbar select Commissioning menu select Report select Fetch from BTS Save the Commissioning Report in Local PC
![Page 77: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/77.jpg)
77 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Site Information
• From the toolbar select Supervision menu select Site Information Save the Site Information file in Local PC
![Page 78: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/78.jpg)
78 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use
Local Commissioning Check on the BSC (1/2)
• Using MML command: ZEEI: <bcf_id>; user can check the status of BTS object under specific BCF.
OADING PROGRAM VERSION 22.4-1BSC LINDA 2010-05-10 16:38:19RADIO NETWORK CONFIGURATION IN BSC: E P B F T R C D-CHANNEL BUSY AD OP R ET- BCCH/CBCH/ R E S O&M LINK HR FR LAC CI HOP ST STATE FREQ T PCM ERACH X F U NAME ST /GP===================== == ====== ==== == ==== =========== = = == ===== == === ===
BCF-0051 FLEXI MULTIRADIO U WO 0 OM051 WO 00220 22010 BTS-0010 U WO 0 2 DEMOBTS1 -/- 6 TRX-001 U WO 12 0 51 MBCCHC P 0 TRX-002 U WO 20 0 51 0 TRX-003 U WO 30 0 47 3 TRX-004 U WO 40 0 47 3 00220 22011 BTS-0011 U WO 0 2 DEMOBTS2 -/- 6 TRX-005 U WO 50 0 51 MBCCHC P 1 TRX-006 U WO 60 0 51 1 TRX-007 U WO 70 0 47 3 TRX-008 U WO 80 0 47 3 00220 22012 BTS-0012 U WO 0 2 DEMOBTS3 -/- 1 TRX-009 U WO 90 0 51 MBCCHC P 1 TRX-010 U WO 100 0 51 1 TRX-011 U WO 110 0 47 3 TRX-012 U WO 120 0 47 3
![Page 79: Commissioning and Integration Flexi Multi Radio](https://reader035.vdocuments.site/reader035/viewer/2022062320/563dba63550346aa9aa532bc/html5/thumbnails/79.jpg)
80 © Nokia Siemens Networks BSC S14 IFI / 090409For internal use