combine pickup heads - pickett equipment pickup head 148” combine pick up head (1991–1996) parts...

Combine Pickup Heads

148” Model Section 2

Model Years 1991 – 1996 ................................................................................................................... 2-5

Pickup Head Layout 1994 – 1996 ....................................................................................................... 6-7

Model Years 1997 – 1999 (1” PUH Bearings)................................................................................... 8-10

4 – Tube Pickup Head Layout 1997 – 1999 .................................................................................... 11-12

Model Years 2000 – Present (1 1/4” PUH Bearings) ...................................................................... 13-15

8 – Tube Pickup Head Layout 1997 – 2014 .................................................................................... 16-17

8 – Tube Pickup Head Layout 2015 – Present ............................................................................... 18-19

Return to this page by clicking the upper right corner of any page in this section.

Revised January, 2017 1

COMBINE PICKUP HEAD

148” COMBINE PICK UP HEAD (1991–1996) Parts List Item No. Part No. Description

1. 940066 Pickup Head Tube with Spiders ♦ 2. 940067 74¾” Finger Rods—Long ♦

Not Shown 940142 72¾” Finger Rod—Intermediate ♦ 3. 940068 70¾” Finger Rods—Short ♦ 4. 119070 Left Pipe Ends—Short ♦

5. 119068 Left Pipe Ends—Long ♦ 6. 119071 Right Pipe Ends—Short ♦ 7. 119069 Right Pipe Ends—Long ♦ 8. 106002 Flangette Housing, 2-Hole ♦ 9. 102035 Center Bushing, 2 Piece White ♦

10. 106000 Rubber Fingers

Not Shown 106034 Offset Rubber Fingers 11. 103044 Cam Arms 12. 102034 End Bushings, 1 Piece Black ♦ 13. 103000 Cam Track, L.H.

14. 940041 Straw Guard, L.H. 15. 940042 Straw Guard, R.H. 16. 940005 Chain Guard, R.H. 17. 940006 Chain Guard, L.H. 18. 940076 Wheel Mount Assembly, R.H. (Obsolete no. 940007) ♦♦

19. 940077 Wheel Mount Assembly, L.H. (Obsolete no. 940008) ♦♦ 20. 940014 Wheel Mount Spacers, 1” 21. 940017 Spring Mount Lock Bushing 22. 119060 Wheel Mount Spring 23. 123016 Steel Wheel (Obsolete no. 123006) ♦♦

24. 120010 Tire 4” x 8” Not Shown 123017 Wheel Assembly–Complete (items 23 & 24) Not Shown 108136 Straddle Hub (used with items: 23, 24, 25, 26)(use bushings 940178 & 940179) Not Shown 102001 1” Straddle Hub Bearing cone (4 required) Not Shown 102002 1” Straddle Hub Bearing cup (4 required) Not Shown 119024 Hub Seal (4 required) 25. 940177 Wheel Fork Axle (Obsolete no. 940023) ♦♦ 26. 940175 Wheel Fork Assembly (Obsolete no. 940090) ♦♦ 27. 103024 Rotor Rod Clip, 2-Hole 28. 103023 Rotor Rod Clip, 3-Hole 29. 118016 Rotor Rod, Right End Only 30. 118015 Rotor Rod 31. 940043 Hold Down Mount Bracket, R.H. 32. 940044 Hold Down Mount Bracket, L.H. 33. 118002 Hold Down Rod

1991–1996 3

COMBINE PICKUP HEAD


34. 940069 Hold Down Rod Mounting Brace Assembly 35. 940046 Support Plate Assembly, R.H. 36. 940047 Support Plate Assembly, L.H. 37. 940071 Hex Roller Slinger Tube 38. 940072 Roller, 4” 39. 940002 End Hinge Plate 40. 940048 Front Shield, L.H. 41. 940049 Front Shield, R.H. 42. 940050 Rear Shield Assembly, L.H. 43. 940051 Rear Shield Assembly, R.H. 44. 940052 Upper Chain Bracket 45. 103039 Lift Chain, 3/16”

Not Shown 119120 Spring, Combine Pickup Head (used with item no. 45) 46. 940053 Upright Angle, L.H. 47. 940054 Upright Angle, R.H. 48. 940018 Wheel Fork Spring Mount 49. 900571 Hinge Lock 50. 940028 Knife Support Assembly, L.H. Short

Not Shown 940167 Spacer Plate 51. 940029 Knife Support Assembly, R.H. Long

Not Shown 940167 Spacer Plate

52. 940073 Rotor Rod Mount Assembly 53. 900137 40 Idler Sprocket Bracket 54. 119010 50 Idler Sprocket, 13 Tooth, R.H. 55. 119005 40 Idler Sprocket, 17 Tooth, L.H. 56. 106013 Flangette Bearing Housing, 2-Hole 57. 106004 Flangette Housing, 3-Hole 58. 102005 Bearing Insert with Lock Collar 1” 59. 119004 Rear 4” Roller Drive Sprocket—15 Tooth 60. 119003 Hex Slinger Tube Power Transfer Sprocket—26 Tooth 61. 103007 40 Chain, 45 Pins or 22 Links 62. 119008 Pickup Head Drive Sprocket—60 Tooth 63. 119006 Hex Slinger Tube Drive Sprocket—15 Tooth 64. 103012 50 Chain, 80 Pins or 40 Links 65. 900225 Hydraulic Motor Mount

4 1991–1996

COMBINE PICKUP HEAD


66. 103017 1” × 3” Split Coupler 67. 113023 Hydraulic Motor Replaces 113008 68. 900570 Hinge Spacer 69. 103001 Cam Track, R.H. 70. 102015 Cam Arm Roller Bearing

Not Shown 940080 Complete Pickup Tube Assembly ♦ (Replaced by 940150) ♦ Pickup head parts noted are for use on 1991–1993 pickup heads only. See pickup head layout, pages 6 and 7 of this section, for 1994–1996 pickup head part information. ♦♦ For obsolete part conversion information contact Pickett Equipment or your local dealer.

This part is manufactured on a built-to-order basis only. Call Pickett Equipment for availability and lead-time

1991–1996 5

COMBINE PICKUP HEAD

PICK UP HEAD ASSEMBLY 148” Model (1994–1996) Parts List Item No. Part No. Description

1. 103044 Cam Arm 2. 102015 Bearing, Cam Arm 3. 119070 Shaft, L.H. Short Finger Rod Stub 4. 119068 Shaft, L.H. Long Finger Rod Stub 5. 119071 Shaft, R.H. Short Finger Rod Stub

6. 119069 Shaft, R.H. Long Finger Rod Stub 7. 106000 Finger, Rubberized–160 Per machine 8. 900859 Center Spider Stub Shaft—Short 9. 900858 Center Spider Stub Shaft—Long 10. 900857 Coupler, Finger Rod

11. 106013 Flangett, 2-Hole 12. 102005 Bearing, 1” Insert with Lock Collar 13. 900709 Spacer, Pickup Head 14. 103001 Cam, R.H. Track 15. 103000 Cam, L.H. Track

16. 940073 Rotor Rod Mount 17. 940149 Pickup Tube with 5 Spiders 18. 940071 Hex Roller 19. 940072 4” Roller 20. 900897 Finger Rod, 333/8”–14 Required per P.U.H.

21. 900866 Finger Rod, 373/8”–2 Required per P.U.H.

Not Shown 940150 Complete Pickup Head Assembly Not Shown 900860 Two Hole End Spider (sold in pairs) Not Shown 900861 Four Hole Center Spider (sold in pairs) Hardware List Item No. Part No. Description

A. 7/16” x 3” NC Hex Bolt–Grade 8 B. 7/16” NC Nyloc Hex Nut C. 1” SAE Flat Washer D. 5/8” NF Jam Nut E. 5/8” Shim Washer

F. 5/16” x 1½” NC Hex Bolt–Grade 5 (For use on Fingers only) G. 5/16” NC Whiz Nut H. 5/16” x 1½” NC Hex Bolt–Grade 8 (For use on all couplers and stub shafts

1994–1996 7

COMBINE PICKUP HEAD

148 ” (14 ft.) COMBINE PICK UP HEAD, (1997–1999)

(1” PUH Bearings)

Parts List Item No. Part No. Description

1. 940150-97 4-Tube Pickup Head (See pages 11–12) (1" PUH bearings)

1a. 940380 8-Tube Pickup Head (Not Shown) (See pages 16–17) (1" PUH bearings)

2. 103096 Cam Track, Universal

3. 901405 R.H. Rear Side Plate*

4. 901406 L.H. Rear Side Plate*

5. 900414 R.H. Roller Shroud

6. 900413 L.H. Roller Shroud

7. 940270 R.H. Side Plate Deflector Rod

8. 940269 L.H. Side Plate Deflector Rod

9. 940359 R.H. Front Side Plate (1” PUH bearings)

10. 940360 L.H. Front Side Plate (1” PUH bearings)

11. 940280 R.H. Gauge Wheel Arm (Requires swivel pin # 940292)

12. 940295 L.H. Gauge Wheel Arm (Requires swivel pin # 940292)

13. 940306 Hold Down Rod Mount Bracket

14. 118002 Hold Down Rod

15. 940017 Spring Mount Lock Bushing

16. 940013 Wheel Mount Spacer (½)

17. 940014 Wheel Mount Spacer (1)

18. 940405 Wheel Fork Assembly (Wide Frame) (1999 only)

18a. 940175 Wheel Fork Assembly (Narrow Frame) (1997–1998)

19. 990080 Wheel Fork Axle (Requires 1” NF Castellated Hex Nut & ¼ Roll Pin) (1999–Present)

19a. 940177 Wheel Fork Axle (Requires 1” NF Castellated Hex Nut & ¼ Roll Pin) (1997–1998)

20. 123018 Steel Wheel 8 × 7 (5 on 4.5) (use bushing nos. 990137 & 990138) (1999–Present)

20a. 123016 Steel Wheel 8 × 4 (5 on 4.5) (use bushing nos. 940178 & 940179) (1997–1998)

Not Shown 108136 Straddle Hub (used with items: 18, 19, 20, 21)

Not Shown 102001 1” Straddle Hub Bearing cone (4 required)

Not Shown 102002 1” Straddle Hub Bearing cup (4 required)

Not Shown 119024 Hub Seal (4 required)

21. 120000 Tire (18 × 9.5—8) (1999–Present)

21a. 120010 Tire (4 × 8) (1997–1998)

Not Shown 123019 Wheel Assembly (Complete) (items: 20 & 21) (1999–Present)

Not Shown 123017 Wheel Assembly (Complete) (items: 20a & 21a) (1997–1998)

22. 119060 Wheel Mount Spring

23. 940018 Wheel Fork Spring Mount

24. 940071 Hex Roller

25. 940072 4” Roller

26. 940073 Rotor Rod Mount

27. 118015 Rotor Rod

Not Shown 103023 Rotor Rod Clip (3 hole)

28. 118016 Rotor Rod (R.H. End Only

Revised September, 2012 9

COMBINE PICKUP HEAD

148 ” (14 ft.) COMBINE PICK UP HEAD, (1997–1999)

(1” PUH Bearings)


Not Shown 103024 Rotor Rod Clip (2 hole) (R.H. End Only)

29. 102005 Bearing, 1” Insert with Lock Collar

30. 106004 Flangette, Housing (3 Hole)

31. 106013 Flangette, Housing (2 Hole)

32. 119148 Sprocket, 50 Q60 Taper Lock (SK Series) (replaces 119008)

33. 119166 Sprocket, 50BTB15H Taper lock (replaces 119006)

33a. 119163 Bushing, 1210 × 1 KW Taper lock (replaces 119006)

34. 119010 Idler Sprocket (50 BS 13)

35. 900334 50 Idler Sprocket Mount

36. 119169 Sprocket, 40BTB30H Taper lock (sprocket only)

36a. 119164 Bushing, 1610 × 1 KW Taper lock

37. 119170 Sprocket, 40BTB17H Taper lock (sprocket only)

37a. 119163 Bushing, 1210 × 1 KW Taper lock

38. 119005 Idler Sprocket (40 BS 17)

39. 940170 40 Idler Sprocket Mount

Not Shown 103012 50 Chain (80 pins or 40 links)

Not Shown 103105 40 Chain (47 pins or 23-1/2 links)

40. 900316 50 Chain Guard

41. 940300 40 Chain Guard

42. 940304 40 Chain Guard Mount

43. 940293 R.H. End Hinge Bracket

44. 940002 L.H. End Hinge Bracket

45. 900571 Hinge Lock

46. 940054-97 Upright Angle, R.H. (1997–Present)

47. 940053 Upright Angle, L.H. (All Models)

48. 940052 Upper Chain Bracket

49. 103036 Lift Chain, 1/4”

50. 940265 Knife Support Bracket (Universal)

51. 940290 R.H. Knife Support (for use with Universal Header)

52. 940289 L.H. Knife Support (for use with Universal Header)

53. 900225 Hydraulic Motor Mount

54. 103017 1” × 3” Split Coupler

55. 113023 Hydraulic Motor (MF Series)

56. 900570 Hinge Spacer

57. 119149 Sprocket, 1” Taper lock Hub (SK Series) (replaces 119008)

58. 900709 Spacer, Pickup Head (329/32” LG.) (1" I.D.)

*Not Shown 940400 Complete R.H. Side Plate Assembly (1” Bearing) (includes # 901405 & 940359)

*Not Shown 940401 Complete L.H. Side Plate Assembly (1” Bearing) (includes # 901406 & 940360)

When ordering parts verify year and wheel fork assembly shaft size. 1997–1999 the wheel fork pivot shaft is

1 3/16”. 2000–present the wheel fork pivot shaft is 1

1/4”

10 Revised September, 2012

COMBINE PICKUP HEAD

4 TUBE PICK UP HEAD ASSEMBLY 148” MODEL (1997–1999)


1. 103095 Cam Arm, Universal

2. 102015 Bearing, Cam Arm

3. 119137 Shaft, L.H. Short Finger Offset

4. 119135 Shaft, L.H. Long Finger Offset

5. 119136 Shaft, R.H. Short Finger Offset

6. 119134 Shaft, R.H. Long Finger Offset

7. 106000 Finger, Rubberized–146 Per machine

8. 900859 Center Spider Stub Shaft—Short

9. 900858 Center Spider Stub Shaft—Long

10. 900857 Coupler, Finger Rod

11. 106013 Flangett, 2-Hole

12. 102005 Bearing, 1” Insert with Lock Collar

13. 900709 Spacer, Pickup Head (329/32" Lg.) (1" I.D.)



16. 940073 Rotor Rod Mount

17. 940149 Pickup Tube with 5 Spiders (1" PUH bearings)

18. 940071 Hex Roller

19. 940072 4” Roller



Not Shown 940150-97 Complete Pickup Head Assembly (1" PUH bearings)

Not Shown 900860 Four-Hole End Spider

Not Shown 900861 Eight-Hole Center Spider

Hardware List Item No. Part No. Description

A. 7/16” × 3” NC Hex Bolt–Grade 8

B. 7/16” NC Nyloc Hex Nut

C. 1” SAE Flat Washer

D. 5/8” NF Jam Nut

E. 5/8” Shim Washer, Optional

F. 5/16” × 1½” NC Hex Bolt–Grade 5 (For use on Fingers only)

G. 5/16” NC Whiz Nut

H. 106051 5/16” × 2” NF Hex Bolt–Grade 9 (For use on all couplers and stub shafts)

Ha. 106051 5/16" NF Stover Nut (Grade 9) (sold as a set with bolt)

12 Revised September, 2012

75

75

7473

7473

7270

6968

72

71

65

64

47

22

45

44

1

54

6

8

34

5

33

3

54

24

25

23

19

17

48 5049

10

55

18

50

51

43

2

2

39

42

37

59

14

2120

2120

3635

44

9

4038

15

12

11

41

13

1716

56

48

5758

60

6162

63

HEAD ASSEMBLY148" PICK-UP

4647

2224

2531

3028

23323026 28

27

29

4

7

66

67

52 53

COMBINE PICKUP HEAD

148” COMBINE PICKUP HEAD (2000-Present)

(1 1/4” PUH Bearings)

Parts List Item No. Part No. Qty Description

1. 940380 1 8-Tube Pickup Head

2. 103096 2 Cam Track, Universal

3. 901405 1 R.H. Rear Side Plate

4. 901406 1 L.H. Rear Side Plate

5. 940395 1 R.H. Front Side Plate (1 1/4" PUH bearings)

6. 940396 1 L.H. Front Side Plate (1 1/4" PUH bearings)

7. 940402 1 Complete R.H. Side Plate Assembly (includes items 3 & 5)

8. 940403 1 Complete L.H. Side Plate Assembly (includes items 4 & 6)

9. 900414 1 R.H. Roller Shroud

10. 900413 1 L.H. Roller Shroud

11. 940270 1 R.H. Side Plate Deflector Rod

12. 940269 1 L.H. Side Plate Deflector Rod

13. 940306 1 Hold Down Rod Mount Assembly

14. 118002 24 Hold Down Rod

15. 940501 1 R.H. Gauge Wheel Arm (Requires swivel pin # 940292)

16. 940502 1 L.H. Gauge Wheel Arm (Requires swivel pin # 940292)

17. 940505 2 Spring Mount Lock Bushing

18. 940506 2 Wheel Mount Spacer (1/2”)

19. 940507 6 Wheel Mount Spacer (1”)

20. 119060 2 Wheel Mount Spring

21. 940018 2 Wheel Fork Spring Mount

22. 940500 2 Wheel Fork Assembly (Wide Frame)

23. 990080 2 Wheel Fork Axle (Requires 1” NF Slotted Hex Nut & ¼” Roll Pin)

24. 120000 2 Tire (18 × 9.5—8)

25. 123018 2 Steel Wheel 8 × 7 (5 on 4.5)

26. 123019 2 Wheel Assembly (Complete) (items: 24 & 25)

27. 108136 2 Straddle Hub (includes items: 28, 29 & 30)

28. 102001 4 1” Straddle Hub Bearing cone

29. 102002 4 1” Straddle Hub Bearing cup

30. 119024 4 Hub Seal

31. 990137 2 Bushing, Spacer 4 -1/8” long

32. 990138 2 Bushing, Spacer 3 -9/16” long

33. 119148 1 Sprocket, 50QDSK60 Taper Lock (SK Series)

34. 119159 1 Sprocket, 1 1/4" Taper lock Hub

35. 900316 1 50 Chain Guard

36. 106050 2 Flangette, 2-Hole (72 MST)

37. 102060 2 Bearing, 1 1/4" Insert with Lock collar

38. 113023 1 Hydraulic Motor (MF Series)

38a. 119109 Seal Kit for Item 38

39. 103017 1 1” × 3” Split Coupler

40. 900225 1 Hydraulic Motor Mount

14 Revised December, 2016

COMBINE PICKUP HEAD

148” COMBINE PICKUP HEAD (2000-Present)

(1 1/4” PUH Bearings)

Parts List Item No. Part No. Qty Description

41. 119010 1 Idler Sprocket (5013E10)

42. 900334 1 50 Idler Sprocket Mount

43. 106013 2 Flangette, Housing (2 Hole)

44. 102005 4 Bearing, 1” Insert with Lock Collar

45. 106004 2 Flangette, Housing (3 Hole)

46. 119166 1 Sprocket, 50BTB15H Taper lock

47. 119163 2 Bushing, 1210 × 1 KW Taper lock

48. 940668 2 Hinge Spacer (2016 – Present)

48a. 900570 2 Hinge Spacer (2000 – 2015)

49. 940666 1 R.H. End Hinge Bracket (2016 – Present)

49a. 940293 1 R.H. End Hinge Bracket (2000 – 2015)

50. 900571 2 Hinge Lock

51. 940665 1 L.H. End Hinge Bracket (2016 – Present)

51a. 940002 1 L.H. End Hinge Bracket (2000 – 2015)

52. 119170 1 Sprocket 40TBT17H Taper lock (2013 – Present)

52a. 119169 1 Sprocket, 40BTB30H Taper lock (2000 – 2012)

53. 119163 1 Bushing, 1210 × 1 KW Taper lock (2013 – Present)

53a. 119164 1 Bushing, 1610 × 1 KW Taper lock (2000 – 2012)

54. 901484 2 Spacer, Pickup Head

55. 103036 2 Lift Chain, 1/4”

56. 119005 1 Idler Sprocket (4017E08)

57. 940170 1 40 Idler Sprocket Mount

58. 119170 1 Sprocket, 40BTB17H Taper lock (sprocket only)

59. 940071 1 Hex Roller

60. 940072 1 4” Roller

61. 940073 1 Rotor Rod Mount

62. 118015 37 Rotor Rod

63. 118016 0 Rotor Rod Half (L.H. End Only)

64. 103023 11 Rotor Rod Clip (3 hole)

65. 103024 2 Rotor Rod Clip (2 hole) (L.H. End Only)

66. 103012 1 50 Chain (80 pins or 40 links)

67. 103199 1 40 Chain (40 pins or 20 links) (2013 – Present)

67a. 103105 1 40 Chain (47 pins or 23 1/2 links) (2000 – 2012)

68. 940300 1 40 Chain Guard

69. 940304 1 40 Chain Guard Mount

70. 940054-97 1 Upright Angle, R.H. (1997–Present)

71. 940053 1 Upright Angle, L.H. (All Models)

72. 940052 2 Upper Chain Bracket

73. 940265-R 2 R.H Knife Support Bracket

74. 940265-L 2 L.H. Knife Support Bracket

75. 119348 2 Shock, Gas Charged (2013 – Present)

Revised December, 2016 15

COMBINE PICKUP HEAD

8-TUBE PICKUP HEAD ASSEMBLY (148” MODEL) 1997–2014

Parts List

Item No. Part No. Qty Description

1. 103095 8 Cam Arm (Universal)

2. 102015 8 Bearing, Cam Arm

3. 119137 4 Shaft, L.H. Short Finger Offset

4. 119134 4 Shaft, R.H. Long Finger Offset

5. 900866 4 Finger Rod 373/8” (10 Holes)

6. 900897 28 Finger Rod 333/8” (9 holes)

7. 106036 292 Finger, with radius (8-Tube Pickup Head)

8. 901412 4 End Spider Stub Shaft (short)

9. 901420 4 End Spider Stub Shaft (long)

10. 900857 24 Coupler, Finger Rod

11. 106013 40 pr. Flangett, 2 Hole

12. 102005 40 Bearing, 1” Insert (with Lock Collar)

13. 901484 2 Spacer, Pickup Head (329/32” Lg.)(1 1/4” I.D.)

13a. 900709 2 Spacer, Pickup Head (329/32” Lg.)(1” I.D.)

14. 103096 2 Cam Track (Universal)

15. 940073 1 Rotor Rod Mount (154¾”)

16. 940379 1 Pickup Tube (with 5 Spiders) (1483/16”) (1" PUH bearings)

16a. 940379-00 1 Pickup Tube (with 5 Spiders) (1483/16”) (1¼" PUH bearings)

17. 940072 1 4” Roller (1527/8”)

18. 940071 1 Hex Roller (1503/8”)

19. 900861 5 Eight Hole Spider

Not Shown 940380 1 Complete 8-Tube Pickup Head Assembly (1483/16”) (1" PUH bearings)

Not Shown 940380-00 1 Complete 8-Tube Pickup Head Assembly (1483/16”) (1¼" PUH bearings)

Roller Carriers

Not Shown 901450 1 1¼” Pickup Head Carrier (Drive-end keyed)

Not Shown 901451 1 1¼” Pickup Head Carrier (Idler-end no key)

Not Shown 900058 1 4” Roller Carrier (Drive-end keyed)

Not Shown 900059 1 4” Roller Carrier (Idler-end no key)

Not Shown 900062 1 Hex Roller Carrier (R.H. end 4¾” keyway)

Not Shown 900063 1 Hex Roller Carrier (L.H. end 2½” keyway)

Not Shown 900044 1 1” Pickup Head Carrier (Drive-end keyed)

Not Shown 900045 1 1” Pickup Head Carrier (Idler-end no key)

Hardware List

Item No. Part No. Qty Description

A. 8 7/16” × 3” NC Hex Bolt–Grade 8

B. 8 7/16” NC Nylon Hex Nut

C. 8 5/8” NF Jam Nut

D. 106051 64 5/16” × 2” NF Hex Bolt–Grade-9 (sold as a set with nut)

E. 106051 64 5/16” NF Stover Nut–Grade9 (sold as a set with bolt)

F. 228 5/16” × 1½ ” NC Hex Bolt–Grade-5 (use on fingers only)

G. 228 5/16” NC Whiz Nut (use on fingers only)

Revised August, 2016 17

4

5

6

7

9

10

10

10

10

1010

10

DETAIL "A" DETAIL "A"

DETAIL "B"

DETAIL "C"

DETAIL "C"

DETAIL "C"

DETAIL "D"

DETAIL "D"

DETAIL "D"

( 4 REQ'D) 37-3/8" (10 HOLES) 900866(28 REQ'D) 33-3/8" ( 9 HOLES) 900897

FINGER RODS REQUIRED PER (148-3/16") 8 TUBE P-U HEAD

20

L.H. END

R.H. END

11

DETAIL "C"

14

16

14

17

18

15

15

19

8 TUBE PICK-UP HEAD ASSEMBLY148" MODEL

13

12

12

11

DETAIL "D"

E

D

DETAIL "B"

G

8

F

Left End

Right End

1

2

3

A

B

A

B

C

C

DETAIL "A"

1

4

5

6

7

L.H. END (NO KEY) R.H. END (KEYED)

COMBINE PICKUP HEAD

8-TUBE PICKUP HEAD ASSEMBLY (148” MODEL) 2015–Present

Parts List

Item No. Part No. Qty. Description

1. 102015 16 Bearing, Cam Arm

2. 103095-LH 8 Cam Arm (Threaded)

3. 103095-RH 8 Cam Arm (Threaded)

4. 119135 4 Shaft, L.H. Long Finger Offset

5. 119137 4 Shaft, L.H. Short Finger Offset

6. 119134 4 Shaft, R.H. Long Finger Offset

7. 119136 4 Shaft, R.H. Short Finger Offset

8. 106036 292 Finger, with radius (8-Tube Pickup Head)

8a. 106052 0 Finger, Soft (Optional)

9. 900866 4 Finger Rod 373/8” (10 holes)

10. 900897 28 Finger Rod 333/8” (9 holes)

11. 900857 24 Coupler, Finger Rod

12. 106013 40Pr. Flangette, 2 Hole

13. 102005 40 Bearing, 1” Insert (with Lock Collar)

14. 901484 2 Spacer, Pickup Head (329/32” Lg.)(1 1/4” I.D.)

15. 103096 2 Cam Track (Universal)

16. 940073 1 Rotor Rod Mount (154¾”)

17. 940379 1 Pickup Tube (with 5 Spiders) (1483/16”) (1¼" PUH Bearings)

18. 940072 1 4” Roller (1527/8”)

19. 940071 1 Hex Roller (1503/8”)

20. 900861 5 Eight-Hole Spider

Not Shown 940380-A 1 Complete 8-Tube Pickup Head Assembly (1483/16”) (1¼" PUH Bearings)

Roller Carriers

Not Shown 901450 1 1¼” Pickup Head Carrier (Drive-end keyed)

Not Shown 901451 1 1¼” Pickup Head Carrier (Idler-end no key)

Not Shown 900058 1 4” Roller Carrier (Drive-end keyed)

Not Shown 900059 1 4” Roller Carrier (Idler-end no key)

Not Shown 900062 1 Hex Roller Carrier (R.H. end 4¾” keyway)

Not Shown 900063 1 Hex Roller Carrier (L.H. end 2½” keyway)

Hardware List

Item No. Part No. Qty. Description

A. 16 7/16” × 2 1/4” NF Hex Bolt–Grade 8

B. 16 7/16” Lock Washer

C. 16 5/8” NF Jam Nut

D. 106051 64 5/16” × 2” NF Hex Bolt–Grade 9 (sold as a set with nut)

E. 106051 64 5/16” NF Stover Nut–Grade 9 (sold as a set with bolt)

F. 228 5/16” × 1½ ” NC Hex Bolt–Grade 5 (use on fingers only)

G. 228 5/16” NC Whiz Nut (use on fingers only)

Revised August 2016 19

combine pickup heads - pickett equipment pickup head 148” combine pick up head (1991–1996) parts...

Documents