chelsea® 249 series

2
Chelsea Overview: Parker Chelsea, the leading power transfer solutions provider to the Work Truck Market, makes P.T.O. installation simpler, quieter and more cost-effective with its new 249 Series P.T.O. The new concept reduces the torsional noise levels that are found on most P.T.O. applications for these trucks. This unique patent pending design concept will provide you with a P.T.O. that is best in class for reduced noise when installed on the new TorqueShift 6 Automatic Transmission. The combination of the Chelsea 249 Series and the new Ford Transmission provide you with an unprecedented torque capacity of 200 Lbs. ft. matched with a wide selection of pump sizes designed to provide you with maximum flow rates. This P.T.O. and pump package will cover your tough application requirements. The 249 Series also provides you ease of installation through a single hose connection and an integrated cartridge valve and pressure switch helping to reduce your installation time. Chelsea ® 249 Series 249 Series for Ford Super Duty Featuring the Patent Pending Noise Suppression System Contact Information: Parker Hannifin Corporation Chelsea Products Division 8225 Hacks Cross Road Olive Branch, MS 38654 USA Phone: 1-888-PH4-TRUK (1-888-744-8785) Fax: 1-662-895-1069 [email protected] www.parker.com/chelsea Two Year Warranty – Greater Bearing Capacity Larger gear Width and greater clutch engagement surface provide a robust design Pump flows up to 25.1 GPM at 1200 Engine RPM – Standard S.A.E. Flanges and Shafts allow for a wider variety of flows and pressures Simplified Ordering – P.T.O., pump, wiring harness and shift kits available under one part number and package Product Features and Benefits: Noise Suppression System – Provides Quiet PTO Applications on your Ford SuperDuty Patent Pending No special installation tools to purchase – Eliminates costs and saves time Single Hose connection and Integrated Actuation Valve – Single hose simplifies installation and reduces installation time along with eliminating leak paths Intermittent Torque Rating of 200 Lbs. ft. – 58 Horse Power @ 1200 Engine RPM

Upload: tranthuy

Post on 03-Jan-2017

222 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Chelsea® 249 Series

Chelsea

Overview:Parker Chelsea, the leading power transfer solutions provider to the Work Truck Market, makes P.T.O. installation simpler, quieter and more cost-effective with its new 249 Series P.T.O. The new concept reduces the torsional noise levels that are found on most P.T.O. applications for these trucks. This unique patent pending design concept will provide you with a P.T.O. that is best in class for reduced noise when installed on the new TorqueShift™ 6 Automatic Transmission. The combination of the Chelsea 249 Series and the new Ford Transmission provide you with an unprecedented torque capacity of 200 Lbs. ft. matched with a wide selection of pump sizes designed to provide you with maximum flow rates. This P.T.O. and pump package will cover your tough application requirements. The 249 Series also provides you ease of installation through a single hose connection and an integrated cartridge valve and pressure switch helping to reduce your installation time.

Chelsea® 249 Series 249 Series for Ford Super Duty

Featuring the Patent Pending Noise Suppression System

Contact Information:Parker Hannifin CorporationChelsea Products Division8225 Hacks Cross RoadOlive Branch, MS 38654 USA

Phone: 1-888-PH4-TRUK (1-888-744-8785)

Fax: [email protected]

www.parker.com/chelsea

• Two Year Warranty – Greater Bearing Capacity Larger gear Width and greater clutch engagement surface provide a robust design

• Pump flows up to 25.1 GPM at 1200 Engine RPM – Standard S.A.E. Flanges and Shafts allow for a wider variety of flows and pressures

• Simplified Ordering – P.T.O., pump, wiring harness and shift kits available under one part number and package

Product Features and Benefits:• Noise Suppression System –

Provides Quiet PTO Applications on your Ford SuperDuty Patent Pending

•No special installation tools to purchase – Eliminates costs and saves time

• Single Hose connection and Integrated Actuation Valve – Single hose simplifies installation and reduces installation time along with eliminating leak paths

• Intermittent Torque Rating of 200 Lbs. ft. – 58 Horse Power @ 1200 Engine RPM

Page 2: Chelsea® 249 Series

Chelsea

Supersedes HY25-0176-B1/US December 2012 HY25-0176-B1/US January 2013© 2012 Parker Hannifin Corporation

Direct Mount Pumps - Pump Flows @ 1200 R.P.M. Engine (Theoretical)Can be Ordered with P.T.O.

Pump Number GPM

(16) CGP-P11A016-5GC 2.4 GPM

(26) CGP-P11A026-5GC 3.9 GPM

(32) CGP-P11A032-5GC 4.7 GPM

(37) CGP-P11A037-5GC 5.5 GPM

(42) CGP-P11A042-5GC 6.3 GPM

(55) CGP-P11A055-5GC 8.2 GPM

Pump Number GPM

(61) CGP-P11A061-5GE 9.0 GPM

(71) CGP-P11A071-5GE 10.6 GPM

(82) CGP-P11A082-5GE 12.2 GPM

(87) CGP-P11A087-5GE 12.9 GPM

(08) CGP-P31B081-5AG 12.0 GPM

Pump Number GPM

(09) CGP-P31B094-5AG 14.0 GPM

(11) CGP-P31B107-5AG 16.0 GPM

(15) P16-150A-2D1 18.9 GPM

(18) P16-180A-2D1 22.6 GPM

(20) P16-200A-2D1 25.1 GPM

Refer to Chelsea Ford application page FRD-10 or FRD-11 for complete pump ratings

249 F M LL X – B 4 16

Basic Model 249 = Ford TorqShift™ 6 Transmission

Mounting Option F = Super Duty w/6.7L Diesel G = F-650 Super Duty w/6.8L Gas

Gear Ratio M

Input Option

LL

Lube Option X = No External Pressure Lube

Shift Option B = 12V Hydraulic Valve K = 12V Electronic Overspeed Ctrl.

Output Option AD = 2-Bolt S.A.E. “A” .75" - 11T XD = 1.25" Dia Keyed Shaft XP = 2-Bolt S.A.E. “A” .875" - 13T 08 = Hyd. Pump 12.0 GPM @ 1200 Eng. R.P.M. 09 = Hyd. Pump 14.0 GPM @ 1200 Eng. R.P.M. 11 = Hyd. Pump 16.0 GPM @ 1200 Eng. R.P.M. 15 = Hyd. Pump 18.9 GPM @ 1200 Eng. R.P.M. 16 = Hyd. Pump 2.4 GPM @ 1200 Eng. R.P.M. 26 = Hyd. Pump 3.9 GPM @ 1200 Eng. R.P.M. 32 = Hyd. Pump 4.7 GPM @ 1200 Eng. R.P.M. 37 = Hyd. Pump 5.5 GPM @ 1200 Eng. R.P.M. 42 = Hyd. Pump 6.3 GPM @ 1200 Eng. R.P.M. 55 = Hyd. Pump 8.2 GPM @ 1200 Eng. R.P.M. 61 = Hyd. Pump 9.0 GPM @ 1200 Eng. R.P.M. 71 = Hyd. Pump 10.6 GPM @ 1200 Eng. R.P.M. 82 = Hyd. Pump 12.2 GPM @ 1200 Eng. R.P.M. 87 = Hyd. Pump 12.9 GPM @ 1200 Eng. R.P.M.

Assembly Arrangement 2 = 249 Series 4 x 2 Only 4 = 249 Series 4 x 4 Only

Model Number Designator

6.641"

2.5"

8.316"

8.683"

Housing Dimensions

P.T.O. Model % ENG. Rotation Shift Type MAX. Torque RatingHP @ 1200

ENG.249FMLLX-B4AD 124% OPP ELEC./HYD. 200 Lbs. ft. 58.0 HP