4 GRIPS

AG-43 AGF-43AR15/M16 Pistol Grip M16/M4/AR15 Tactical Folding Pistol Grip

Made from reinforced plastic composite, it incorporates finger swelts and a backstrap that is designed with surfacing to enhance your grip and minimize the chance of slippage should the grip become wet.The integral extended beavertail provides better control during firing sequences as it allows a higher and firmer hold on your rifle.Also, the supplied insert securely seals the uniquely designed bottom of the Tactical Pistol Grip to allow a readily accessible storage area.

This unique folding grip enables quick deploymentfrom vehicles, easy storage and carrying in gun casesand perfect for undercover work.

Features:

Transforms a horizontal grip to a vertical gripPerfect for undercover workWeapon will fit easier in gun case and paratroopers weapon rackDeploy faster from vehiclesQuick Fold/Unfold buttonMade from reinforced plastic composite

GRIPS 5

AG-47 SG-1AG-58AK-47/ Galil Pistol Grip AK-47/Galil Sniper Pistol GripSa. Vz. 58 Pistol Grip

Advanced ergonomic designTough design & material built in storage compartmentImproves finger to triger corespondenceAvailable in different camouflage colors

Advanced ergonomic designTough design & materialBuilt-in storage compartmentImproves finger to trigger correspondenceUnique texture to prevent slipping

Replace standard pistol grip to provide greater comfort controlAdvanced ergonomic designAjustable palm swell style gripAdapts easily to different sized handsPuts pressure in the palm of the hand to allow deliberateand calculated trigger pullTough design materialAvailable in different camouflage colors

6 GRIPS

AGR-870 WG-1911AGM-500

Rock solid one piece ergonomic design non slip special texturing made from composite materials natural fighting stance hold on your shotgun - slightly angled to counter recoil improved performance in reaction, on target time and muzzle control during fire.No gunsmith is requiredHas storage compartment for batteries, cleaning kitAllows attaching M4 style and compatible buffer tube hence allowing any M4 style stock to be installed allows attaching our new «UAS» tactical butt stock with or without our new folding knuckle (right or left handed configuration) allows attaching our patented recoil reducing buffer tube

State-of-the-art ergonomic designDurable & hardwearing constructionBuilt-in storage compartmentImproves finger-to-trigger contactFor limited spaces & concealed carry: folding feature reduces overall weapon sizeAvailable in different camouflage colors: black, desert tan, olive drab green, and alpine whiteAvailable in different training colors: red and blue

Fits most 1911 and clonesEasy installation – no gunsmitthing requiredTextured grips for maximum non-slip controlProvides a mag-well funnel for easier & smoother reloadingLight weight – constructed of reinforced polymer composite

Remington 870 Pistol Grip Mossberg 500 Pistol Grip 1911 Mag. Well Grip

GRIPS 7

AG-44 FGG-STAL-4

No slip designDouble side pressure switch housingInternal waterproof battery compartmentQuick release mechanism or a secure bolt locking systemPerformance-enhancing accessory for any firearm fitted with a standard (underside) picatinny railDurable, hardwearing & lightweight polymer constructionUser installed-no modificationOr gunsmith requiredAvailable in different camouflage colors

Quickly transforms from a horizontal grip to a vertical gripQuick attachment/removal mechanismState-of-the-art ergonomic designHeavy duty polymer constructionFits all standard picatinny railsFits most handguns with front picatinny-type accessory railSpecifically designed so it will not interfere with handgun firing when in horizontal positionAvailable in different camouflage colors: black, desert tan, olive drab green, alpine white; and in training colors: red and blue

Easy to fit and secure - quick release button. Fits hand guards equipped with a weaver or picatinny rail system. Natural fighting stance hold on your rifle - slightly angled to counter recoil. Improved performance in reaction, on target time and muzzle control during rapid fire. No gunsmithing is requiredQuick release mechanismStorage compartment for batteriesor other items, molded fromreinforced polymer compositeSuper lightweight

Tactical Folding ForegripFirearm Tactical Vertical GripErgonomic Vertical Foregrip

8 GRIPS

TFLQRTFL7 Pos. Tactical Folding Foregrip 7 Pos. Quick Release Tactical Folding Foregrip

Quickly transforms from a horizontal grip to a vertical gripEnables 7 different positions of the grip for tactical shootingEnables slip on and side mounting of the grip on the picatinny railState-of-the-art ergonomic designHeavy duty polymer constructionHuge storage compartmentFits all standard picatinny railsAvailable in different camouflage colors: black, desert tan, and olive drab green

Quick Release

GRIPS 9

MWG MG-20AR15/ M16 /M4 Magazine Well Grip Foregrip/Spare Magazine Holder

Transform your existing magwell onto a fast action magwell and ergonomic gripMounts directly below the receivers front pivot pin And over the existing magazine wellProvides a large beveled opening for super-fast magazine changesNo gunsmithing or modifications to the weapon neededEasy installation – simply tighten into place utilizing 3 set screwsLight weight - constructed of reinforced polymerComposit

Unique 2-in-1 tactical device serves as both foregrip and spare magazine holderEnhances tactical efficiency by accommodating an additional magazine on the gun and facilitating fast magazine changesFits all standard picatinny railsQuick-release attachment allows for easy mounting or removalSecure bolt locking system gives option of “permanent” mountingDurable, hardwearing & lightweight polymer constructionState-of-the-art ergonomic design & easy installation

10 GRIPS

Rotating Tactical Foregrip & Bipod

Transforms from foregrip to a full function bipod with the push of a buttonPivoting and tilting headHead features a unique adjustable pressure switch mountQuick release rail mount for any firearm fitted with a standard (underside) picatinny railIndependent adjustment of each leg in 5 different length settingsLegs are made from aluminum 6061-t6 hard coated anodized picatinny railsDurable, lightweight polymer constructionUser installed-no modification or gunsmithing requiredAvailable in various colors

GRIPS 11

T-POD FA

T-POD QR

T-POD SL

T-POD

3 In One: Foregrip Flashlight Holder & Bipod

Quick Release Mechanism

Integrated “Speedlight” Flashlight

Tactical Foregrip-Bipod

Durable, lightweight polymer constructionUser installed-no modification or gunsmithing requiredAvailable in various colorsTested to withstand up to 250 pounds/115 kilogramsLength closed 6.00” / 152mmDeployed height 8.55”/ 217mmDeployed width 7.90” / 200mmDiameter 1.74” / 43mm (dimension)Stand for largest size at gripped area, but variants do to ergonomic designWeight 10 oz/ 283.5grEach leg can be adjusted 4 steps of 0.43” / 11mm or be fully closed at bi-pod position

Transforms from foregrip to full function bipod with the push of a buttonIndependent adjustment of each leg in 5 different length settingsLegs are made form alluminum 6061-t6 hard coated anodized picatinny railsUnique double release button design eliminates accidental deployment of the bi podNon slip grip, ventilated designDouble side pressure switch housingQuick release mechanism or a secure bolt locking systemPerformance-enhancing accessory for any firearm fitted with a standard (underside) picatinny rail

UPR

FGR-3

HGS

DPR

14 RAIL SYSTEMS

Universal Picatinny Rail

M4 Polymer 3 Rail Handguard

Double Picatinny Rail

Universal Handguard

Fits all M16/M4/AR15 hand guardsMil std 1913Compensates the hand guards’ angle to allow parallel To barrel positioningDurable reinforced polyme

Enables three picatinny railsMountpicatinny based accessories on your shotgunState of the art ergonomic designDurable, hardwearing & lightweight constructionQuick & easy installationNo gun smiting requiredImproves thermal insulationConstructed from reinforced polymer composite

Fits all M16/M4/AR15 standard handguardsTwo short picatinny rails, each 45 degrees off of centerCan be positioned on upper or lower segment of handguardGives excellent positioning for operating flash lights or lasersShortness of rails allow most of the handguard to remain unobstructed by accessory attachmentsBuilt from lightweight, heavy-duty, reinforced polymer

Lightweight and extremely durable hand guardsFor M4 carbines. These round shaped slim hand guards are complete with aluminum heat shields ,and are the best in size to achieve firm grip will withstand all and environmental and field conditions ,tested and approved by the idf As standard item.

SBSDual Picatinny Mount Provides two Picatinny rails for mounting tactical

laser&light devicesTight fit of adaptor ensures the stability and accuracy of all laser & optical devicesPrecisionmachined from aviation-grade anodized aluminum stockDurable, lightweight constructionEasy to fit and dismantleSecured by hex (“Allen” type) boltsNo modification or gunsmithing required

NFR

VFR

RAIL SYSTEMS 15

Rail System

Aluminum Quad Rail Carbine length M4 replacement forend rail system

System adds four mil-spec picatinny rails for versatile accessory applications

Precision machined from 6061 T6 billet Aluminum for Maximum strength

Fully rugged construction will not bend or deform under any condition

Field tested under extreme conditions for maximum performance and durability

Hard coat anodized for optimum wear resistance

Simple installation, replace your polymer hand guards and secured by 4 bolts

Rail system firmly locks to the barrel nut and front Hand guard Cap

No gunsmith required

System aligns perfectly upper receiver rail

Receiver alignment is achieved by implementation of anti-rotation locking tabs

Slim profile for better grip and handling of the firearm

Made from 6061 T6 Aluminum, all rails 1913 mil spec, hard coat anodized

This new design allows the user to modify the system to his best battle stance

Optimization can be achieved because the rails are not an integral part of the system

Rails are bolted in the foregrip and seated in specially designed cone shaped recesses, allowing them to be fitted at any or all of six positions around the foregrip, spaced 45 degrees apart

There is no need to connect all four rails but just the ones that are needed on thedesired side and selected angle, making it slimmer and more comfortable to hold

While secured, the rails are “rock solid”, due to the special mounting design

The system is two pieces of lightweight forearm that are locked against each other and clamp the barrel nut

This style of assembly is best for bipods, grips, and flashlights, etc. heavy optics and aiming sights require an upper rail to be mounted, which attaches the forearm to the upper receiver and provides two locking points, barrel nut and upper receiver

Easy to mount, requiring no gunsmith

AK-47

VFR-RPK

VFR-AK

16 RAIL SYSTEMS

Ak -47 Handguards

RPK Aluminum Rail System

Ak Aluminum Rail System

Enables four picatinny railsSecure enough for optical sight and lasersState of the art ergonomic designDurable, hardwearing & lightweight constructionQuick & easy installationNo gun smiting requiredImproves thermal insulationConstructed from reinforced polymer composite

Precision machined from 6061 T6 billet aluminum for maximum strengthFour mil-spec picatinny rails for versatile accessory applicationsNo gunsmith required Simple installation, replaces the original hand guards and bolted on the rifleTested under extreme conditions to perform zero-retentionHard anodized coating for wear resistanceNarrow and slim size for better grip and handling of the firearmVery rugged structure, most rigid platform available today for AKPerfect alignment with the receiver Solid piece upper rail stretches from the gas tube until the end of the receiver to accommodates scopes, night vision and reflection sights while allowing correct eye to scope distanceUnique design allow the original steel sights to be accessible if optic sights are not mounted

RPK replacement hand guards rail system system adds four mil-spec picatinny rails for versatile accessory applications precision machined from 6061 T6 billet aluminum for maximum strength fully rugged.Construction will not bend or deform under any condition field tested under extreme conditions for maximum performance and durability.Hard coat anodized for optimum wear resistance simple installation, replace your hand guards and secured by 4 bolts no gunsmith required system aligns perfectly slim profile for better grip and handling of the firearm the best solution for mounting sights and lasers

SVDM

VFR-VZ

SA-58

RAIL SYSTEMS 17

Drogunov/Svd Telescope Mount

VZ. 58/SA.58 Aluminum Rail System

Polymer Rail System

New design, side locking system, requires no tools for adjustment.Allows mounting on the left side of the guns body.Milled from 6061 aluminum billet.All matte black hard coated anodize.Toughest mount available on the market, will easily hold heavy night vision scopes.Compatible with any mill-spec picatinny based scope.Easy installation to enhance your dragunov svd with a scope.

Enables four picatinny rails Secure enough for optical sights and lasers State of the art ergonomic design Durable, hardwearing & lightweight construction Quick & easy installation No gun smithing required Improves thermal insulation Constructed from reinforced polymer composite

Precision machined from 6061 T6 billet aluminum for maximum strengthFour mil-spec picatinny rails for versatile accessory applicationsNo gunsmith requiredSimple installation, replaces the polymer hand guards and secured by4 bolts to Firmly locks on the rifleTested under extreme conditions to perform zero-retentionHard anodized coating for wear resistanceNarrow and slim size for better grip and handling of the firearmVery rugged structure will not bend or deform under any conditionPerfect alignment with the receiver

18 RAIL SYSTEMS

PRMO

BM-4

PR-870

Mossberg 500 Rail System

Remington 870 Rail System

Benelli M4 Polymer 4 Rail System

Enables three picatinny railsMount picatinny based accessories on your shotgunState of the art ergonomic designDurable, hardwearing & lightweight constructionQuick & easy installationNo gun smiting requiredImproves thermal insulationConstructed from reinforced polymer composite

Enables three picatinny railsMountpicatinny based accessories on your shotgunState of the art ergonomic designDurable, hardwearing & lightweight constructionQuick & easy installationNo gun smiting requiredImproves thermal insulationConstructed from reinforced polymer composite

Enables four picatinny railsSecure enough for optical sight and lasersState of the art ergonomic designDurable, hardwearing & lightweight constructionQuick & easy installationNo gun smiting requiredImproves thermal insulationConstructed from reinforced polymer composite

RAIL SYSTEMS 19

MP5/G3

MP5K

MP5

G3

Rail System

Replaces the original hand guard and give the option to mount laser pointers, grips, bipods, flashlight or any other accessory based on picatinny railMade from 6061 T6 aircraft aluminumAll rails 1913 mil specHard coat anodizedSpecial design one solid item with only one bolt to lockLightweight and strongEasy to mount, require no gunsmithDo not extend over the original size of the hand guardsGun handling will remain regularWill not move or vibrate on the gun at any conditions

VFR MAGFN MAG Aluminium Rail System Replaces the original hand guard and gives the option to

mount laser pointers, grips, bipod, flashlight or any other picatinny rail based accessories.Made from 6061 T6 aircraft aluminumAll rails 1913 mil specHard coat anodizedSpecial design one solid item with two locking bolts.Lightweight and strongEasy to mount, require no gunsmithGun handling will remain regularWill not move or vibrate on the gun at any conditions

20 RAIL SYSTEMS

UTR/M

BSR-1/BDR-2

VFR-GA/GX-6

Uzi Aluminum Tri-Rail System

Galil Aluminum Rail System/ Micro Galil Rail System

Barrel Single Rail/Double Rail

Fits all GALIL models (not micro).Solid & stable Long upper rail, underside rail & side railsTwin short-rails on either side of front sightConforms to MIL-STD 1913No modification or gunsmithing requiredPrecision machined from solid block of aviation grade aluminumComes with rail covers to protect grip and provide thermal insulation available in different camouflage colors

Provides one rail formounting tactical laser&light devices

Tight fit of adaptor ensures the stability and accuracy of all laser&optical devices

Installation: up&down or side by side condition

Precisionmachined from aviation-grade anodized aluminum stock

Durable, lightweight construction

Easy to fit and dismantle

Secured by hex (“Allen” type) bolts

No modification or gunsmithing required

Replaces the original hand guard and gives the option to mount laser pointers, grips, bipod, flashlight or any other picatinny rail based accessories.Made from 6061 T6 aircraft aluminumAll rails 1913 mil specHard coat anodizedSpecial design one solid item with two locking bolts.Lightweight and strongEasy to mount, require no gunsmithGun handling will remain regularWill not move or vibrate on the gun at any conditions

RAIL SYSTEMS 21

USM

GIS

Metal Jericho Picatinny Rail

Glock Scope Mount

Allowing rail based flash lights & accessories such as M3/M6 to be mountedAllows rear rocker switch to be activated by the fire control finger or the thumb of the off handThree piece lightweight aluminum that easily clamps over the existing Jericho trigger guardThe installation only requires a small wrench, included in the packageThe rail fits tight enough to retain zero of the M6 laserMachined from billet 6061 T6 aluminum alloyHard coat anodized matte black per mil-spec

Fits all Glock models with a front picatinny-type accessory railDurable, lightweight polymer constructionOriginal sights remain usableEasy to installFacilitates prompt sight alignmentAccepts all sights designed to fit a standard picatinny railAdds a front underside accessory rail in place of the original that was used for the Installation

MJPR

Handgun Universal Scope Mount Fits most gun models with a front Picatinny-type accessory railMade from 6061 T6 AluminumOriginal sights remain usableEasy to installFacilitates prompt sight alignmentAccepts all sights designed to fit a standard Picatinny railAdds a front underside accessory rail in place of the original that was used for the Installation

24 KPOS

Very compact in size.Smaller than a mini-Uzi.Includes: five-point ergonomic weapon grip. one-point tactical sling adapter.fold-to-the side compact buttstock with rubber buttpad. innovative patented design which locks the gun to the frame in both the front and back, making it a ‘rock-solid’ system.Allows: use of the original iron sight.Note: flip or red-dot sight not required. mounting of a foregrip, flashlight, optics, laser and/or iron sight.Mounting a silencer on the barrel.Quick and easy installation with no tooling required.Fits Glock 17/17L/19/22/23/34/35 Glock 21 Sig 226/2022 (Pro)

Pistol To Pdw Convesrsion (Glock And Sig Sauer Models)

KPOS 25

Revolutionary patented recoil-reducing mechanism built hiddeninside the stock with a premium silicon chrome alloy springUnique patented “anti-rattle” mechanismSlick new design with no protruding parts,will not hang up on gear and webbingUnique new slick and quick operated inversed positioning leverIntegral ribbed rubber butpad with a no slipdesign

Shock Absorbing Butt StockIntegrated “QD” sling swivel connectors on both sides.Watertight battery storage for two CR123A 3V Lithium Batteries / AA 1.5vFit perfectly on both tubes - MIL-SPEC and commercial Aftermarket!Made from mill-spec reinforced composite polymerAvailable with an adjustable cheek piece

28 BUTTSTOCKS

GLR-16

MG-CP

AR15/M16 Butt Stock

Micro Galil Cheek Piece

Three integrated slots for sling attachment, one frontal two at the backTwo ambidextrous metal quick release sling mount points at the backRear belt swivel that can be removedSealed storage compartment for two CR123 or AA batteries with a rubber fixation that eliminates rattling soundsNon-slip rubber butt pad with aunique traction design, allows fast shouldering & a real non slip quality with body armorUnique integral pressure system apply constant pressure on the buffer tube ,by closing gaps around the buffer tube rattling and sounds are eliminatedFits perfectly on both mill standard and after market tube with a perfect non rattling fitRetains contour & size of original designMade from tough composite polymerAvailable with an adjustable cheek piece

Cheek Piece optimizes eye position & eye-to-goggle contactDurable & lightweight polymer constructionEasy to fit & operateAvailable in different camouflage colors

BUTTSTOCKS 29

GLR-17Glock Tactical Stock Enhances accuracy at longer ranges

Unique sling featureQuick-release for easy attachment and removalExtendible to various lengths for different tactical applications concealed carryReinforced polymer composite construction favored by undercover law enforcement & security personnelDurable, lightweight & easy to carryCompatible with FAB camera adaptor: enables steady aiming of camera for long-range photography

SSR-25SR25/ M16A2 Sniper Stock Adjustable cheek piece optimizes sniper’s eye position

Built-in, 2-stage, 7.5” long, retractable monopod (“Third Leg”): Quick-opening, precision“Height adjustment” mechanism helps keep sniper’s rifle steady for extended periodsMil Spec EPDM rubber recoil padState-of-the-art ergonomic design optimizes sniper’s posture, stability & aimDurable, hardwearing, lightweight constructionQuick & easy installation using 2 bolts only: no modifications or gunsmithing requiredAll adjustable features are readily accessible & respond promptly, so that anynecessary adjustment can be accomplished in secondsEnables shooter to switch between goggles, standardsights or night vision goggles in seconds

30 BUTTSTOCKS

Remington 870/Mossberg 500 tactical stocks

AGR870FK

AGMF500FKAGRF870FK

AGM500FK

AGR870FKSB AGM500FKSB

Collapsable Folding Shock Absorbing Polymer Steel

BUTTSTOCKS 31

AGRF870FKSB AGMF500FKSB

UAS870 UASF500

Ambidextrous side-folding mechanism(can be changed to fold left or right).

Adjustable cheek piece

Rubber butt pad

Full Ergonomic sleek design

All AR-type stock kits are alsoavailable with an adjustable cheek piece

32 BUTTSTOCKS

RBTֹ-47FK

M4AKP M4AKPSB

SBTֹ-47FK

AK-47 (also availablke for VZ-58)

Collapsable Folding Shock Absorbing Polymer Steel

BUTTSTOCKS 33

M4AK M4-AKSB

UAS-AKP UAS-AK

36 FLASHLIGHTS & MOUNTS

PLA-1 PLS-1 PLGFlashlight & Laser Adaptor Flashlight Side Mount Handgun Flashlight Mount

Design to hold flashlights or laserdevices Available in 3/4”, 1”, and 1.125”diameter sizes A secure bolt locking system for themounted deviceFits on picatinny railsQuick release mechanism Tough, rigid & lightweight polymerdesign Special shape for easy turn-ondeviceModified to suit handgun or rifle

Design to hold all 1” flashlightsA secure bolt locking system for the mounted deviceFits on picatinny railsNew designed Quick release mechanism for fast add or removeTough rigid & lightweight reinforced polymer designAllows perfect use in conjunction with a vertical foregripAllows the flashlight to be mounted on either side rail for ambidextrous useAllows perfect access to the rear button of the flashlightIncreases access to the flashlight rear button when mounted on any rail on the quad railPrefect for mounting with a vertical foregrip on the same lower rail,Achieving natural access to the flashlight buttonEasy installation

Fits perfectly on most handguns accessory railsDesign to hold all 1” flashlightsSecure bolt locking system for the mounted deviceNew designed Quick release mechanism for fast add or removeTough rigid & lightweight reinforced polymer designAllows perfect access to the tail cup switchAchieving natural access to the flashlight buttonEasy installation

Rear thumb activation

Index fingertrigger type activation

FLASHLIGHTS & MOUNTS 37

Three in one: special handgrip and a flashlight mount with a built in trigger thattransforms tactical light into a Vertical Fore grip Weapon LightsThis unique ergonomic fore grip will fit perfectly to your hand while holding in up to 1» diameter tactical light with Tail cap switch and allow trigger activation of the lightErgonomic designed grip, comfortable and natural to use «fighting stance»Designed to hold any 1» diameter flashlight and allow quick and easy operationEasy to fit and secured by 2 boltsFits hand guards equipped with a Weaver or picatinny rail systemNo gunsmithing is requiredMolded from reinforced polymer compositeSuper lightweight

T-GRIP T-GRIP RIntegrated Foregrip & Light Holder Integrated Foregrip & Light Holder W/ Rear

Activation

38 FLASHLIGHTS & MOUNTS

FGGS-1 FFAT4 Integrated Folding ForegiripAnd 1 Inch Flashlight Mount

Two-Position Foregrip & Flashlight Mount

The grip transforms from vertical to horizontal with a push of a button, and allows you to choose your natural “fighting stance”Designed to hold any 1inch diameter flashlight and to allow quick and easy operationSimple rear thumb activation of the flashlightEasy to fit on a firearmSecured to the picatinny rail by 2 boltsFlashlight secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargeable flashlightNo gunsmithing is requiredMolded from reinforced polymer compositeSuper lightweight

The grip transforms from vertical to horizontal by the push of a button, and allows you to choose your natural “fighting stance”Designed to hold any 1 diameter flashlight and to allow quick and easy operationEasy to fit on a firearm. Secured to an accessory rail by 2 boltsFlashlight secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargeable flashlightsTwo holes on the sides allow ambidextrous operation of flashlights with side switchesFits handguards equipped with a Weaver or Picatinny rail systemNo gunsmithing is requiredMolded from reinforced polymer compositeSuper lightweight

FLASHLIGHTS & MOUNTS 39

MIKI KAPI2Potato Shaped Foregrip Microgalil Handguard With Flashlight Adaptor

Two-in-one: special handgrip and a flashlight mountThe most ergonomically designed grip ever, featuring the most comfortable and natural to use “fighting stance”This unique item permits several gripping positions, such as forearm, fore grip and many others most important is the way it fits perfectly in your handDesigned to hold any1” or 1 1/8” diameter flashlight (different model) and to allow quick and easy operationEasy to fit on a firearm. Secured to an accessory rail by 1 boltsFlashlight secured in the mount by a quick release locking system that allows quickMounting or removal of the flashlight, a real advantage for rechargeable flashlightsFits handguards equipped with a Weaver or Picatinny rail systemNo gunsmithing is requiredMolded from reinforced polymer compositeSuper lightweight

Cutting-edge ergonomic designDurable, light-weight, hard-wearing constructionQuick, easy bolt-in installation. No gunsmithing requiredFits 1-1/8” diameter tactical flash light (i.e.- Stinger)Improves thermal insulation

40 FLASHLIGHTS & MOUNTS

PR3 SPEEDLIGHT 6VSPEEDLIGHT3V1 Inch Tactical Flashlight W/ Integrated Picatinny Adaptor

1 Inch 6V Led Tactical Flashlight1 Inch 3V Led Tactical Flashlight

1 inch diameterAerospace aluminum casingHard anodized – mil specWater resistantOver all length - 3.1 inch 100 - 120 Lumen LED output Pressure activated on/off tail cup or PTTPowered by single CR123 batteryProvides approximately one and a half hours constant on runtime

1 inch diameterAerospace aluminum casingHard anodized – mil specWater resistantOver all length - 3.1 inch 100 - 120 Lumen LED output Pressure activated on/off tail cup or PTTPowered by single CR123 batteryProvides approximately one and a half hours constant on runtimeBuilt-in rail clamp

1 inch diameterAerospace aluminum casingHard anodized – mil specWater resistantOver all length - 4.7 inch 100 - 120 Lumen LED output Pressure activated on/off tail cup or PTTPowered by two CR123 batteryProvides approximately one and a half hours constant on runtime

FLASHLIGHTS & MOUNTS 41

SPEEDLIGHT MAGNA FBA\LMagnetized Flashlight Bayonet Flashlight & Laser Adapter

All the advantages of our famous speed light with a magnetic base connector small but powerful magnetic base will allow attaching our small but powerful speed light on any metallic object ball joint connector will allow rotating the flash light to any angleFlashlight features: 1 inch diameter. Aerospace aluminum casing. Hard anodized – mil spec. Water resistantOver all length - 3.1 Inch . 100 - 120 Lumen LED output Pressure activated on/off tail cup or PTTPowered by single CR123 batteryProvides approximately one and a half hours constantOn runtime

Perfect attachment to the AR15/M4/M16 or Uzi bayonet lug.Design to hold flashlights or laser devices.Available in 3/4”and 1” diameter sizes.A secure bolt locking system for the mounted device.Tight fit of adaptor ensures the stability and accuracy of all laser & optical devices.Precision machined from aviation-grade anodized aluminum stock.Durable, lightweight construction.Easy to fit and dismantle.Secured by hex (“Allen” type) bolts.No modification or gunsmithing required

FBA:M4 FBA-UZ: UZI

27 MAGAZINE ACCESORIES44 MAGAZINE ACCESORIES

MH-556 MTHMH 5.56/.223 M16/M4/Ar15 Magazine Carrier Horizontal Magazine Carrier

Enables a carry of a magazine and ammo outside and parallel to the gunMagazine is held parallel to the gun and enables a quick operation for loadingNo need to carry your magazine in your pocketsA secure way to carry a gun and a magazine together but not loadedStrong and durable lightweight reinforced polymerFits into the magazine hole and keeps it clean and safe

This new and innovative design enables the carry of a loaded magazine on your rifle where you need it for the fastest possible transition of the loaded magazine to the firearmDon’t be caught reaching for your vest pouch or pockets!Lock and load fast and effectively - simply rotatate the magazine 90 degrees, chamber a round and you are ready to engageA secure way to carry a gun and a magazine together but not loadedAllows for visual identification of the condition (loaded or unloaded) of the firearmConstructed of strong and durable lightweight reinforced polymerSnug fitting rattle free designFits into the magazine well keeping it safe from obstruction and debris

MAGAZINE ACCESORIES 45

MCE TZ-2Polymer And Strips 5.56/7.62 Magazine Couplers Polymer Magazine Coupler

Durable & lightweightResistant to extreme operational conditionsFits all 5.56/7.62 mm magazinesEasy to installImproves convenience & tactical efficiencyMinimalist design: does not interfere with quick drawing of magazines (all mechanical parts are located between the magazines)Available in different camouflage colors

Magazine coupler for M16/M4/AR15, AK-47, Galil, H&K (33,53,91), Ruger Mini M14 and Sig (542,543)Durable and light-weight polymer constructionResistant to extreme operational conditionsEasy to installImproves operational efficiency

M4 Polymer Magazine Coupler

46 MAGAZINE ACCESORIES

Durable & lightweightResistant to extreme operationalConditionsFits m4 and galil 5.56 MagazinesEnables terracing of the magazines forProper useEasily transoms from a coupler to aMagazine carrierEasy to installImproves convenience & tactical efficiency

M4 Magazine PouchFits aluminum and steel M16/M4/AR15 style magazinesAttaches on the belt with a paddleUnique design clicks the magazine inside and secures it from fallingEnable a quick drawCan be placed either on the left or right hip

MAGAZINE ACCESORIES 47

GMFG/9 TZ-5Glock Magazine Frame Picatinny Attachment 9mm/Mp5 Magazine Copler

Magazine couplerFits all MP5 and 9mm MagazinesDurable and light-weight polymer constructionResistant to extreme operational conditionsEasy to installImproves operational efficiency

Mounts spare magazine to pistol’s underside front accessory rail where it serves both as comfortable fore-grip and as spare magazineAllows for rapid magazine changeQuick-release mounting device attaches to spare magazine butt plateEasy to fit & operateDurable, lightweight polymer constructionMagazine & pistol not included

Attaches perfectly on an M4 /AR15 /M16 bayonet lug and creates a sturdy and secured bi-pod mounting platformMachined from 6061 billet aluminum with hard anodize coatingReleases the hand guard from the bi-pod and allows natural grip or space for mounting grips or other accessoriesThe Bi-pod can be mounted facing forward or backwards

50 PARTS & UPGRADES

WB-2 HBAWindow Braker Harris Bipod Adaptor

Device mounts on accessory rail ofhandgun Glass breaker is triggered by pressing weapon against the window, thereby allowing an officer to break a car (or other) window without taking his gun sights off ofthe suspect Quick release mechanism fitsPicatinny or Weaver railsLife-saving, quick and clean glass-breaking Device equipped with a lower rail, allowing for the mounting ofadditional tactical devicesEasy to fit & convenient to operate Durable, hardwearing & lightweight metal & plastic compositeconstruction Widely used by emergency services, law enforcement agencies andSWAT teams worldwide

The HBA creates the most secure, most stable bipod mounting-platform available on the market todayEliminates bipod instability and unreliabilityMounts on the weapon’s underside Picatinny or Weaver accessory railDurable, lightweight polymer construction

M4-BHAM4 Bayonet Bi-Pod Adaptor

PARTS & UPGRADES 51

TD-2Trijicon Picatinny Mount Barrel Mounted - Tire Deflators Dagger

Low profile mounting platformSecured by steel locking full length solid feet and two steel leversDesigned with a ACOG channelFits all Mil-Std1913 picatinny dove tail RailsFits non standard picatinny rails by a self-locking aircraft nuts adjustment of the locking feetQuick mounting and dismounting that Repeats zero alignmentBase milled from 6061 T6 air craft aluminum, feet and levelers are milled from 4130 carbon steelNo gunsmith required

Quick installed on the flash hiderMade from hardened special steelNo gun smithing requiredDeflates tire in secondsDo not disturb shooting

TPM

FCH

UGC TSA SLA

FCPLO

52 PARTS & UPGRADES

Glock Cocking Handle

AR15 Receiver Gap Closure Tactical Sling Adapter Sling Picatinnty Attachmen

Letter Opener Pressure Point Restraining Tool

Enables single-handed cocking ofGlock handgunUseful when one hand is injured Useful when driving: enables driver to cock weapon while keeping onehand on the wheel Almost any common object can provide counter pressure for charging a Glock with cocking handle: belt, pants waist, vest,railing, table, chairFits all Glock pistols Cocking handle base replaces slidecover plate Quick attachment & removal of handle to/from plate while baseremains mountedSwitches quickly to adapt to left-handed or right handed shootersDurable steel constructionIdeal for emergency situations

Eliminates the original gap between the upper and lower receiver reduces noise improves stability & accuracy cost effective solution simple toinstal

The FAB Defense phosphate finished steel sling adapter plate - for use with any AR15 - M16 - M4 with a collapsible butt stockReplace your standard issue receiver end plate to enable rear reciever sling attachment pointsProvides two rear receiver sling loops enabling attachment of a tactical sling in either left or right hand configuration

Attaches your front part of the sling to your picatinny rail accepts. All slings up to 1” (25mm) 6061aircraft grade aluminum,CNC machined mounts to any picatinny type ii class 3 hard black anodized ultra light weight easy to install with one locking bolt lifetime warranty

Made of high-tech composite materials with 60% glass fibersCompletely non-metallic EOD knifeProvides superior plunging power as well as a hard edgeScalloped serrated edge on both sidesGives additional opening power on fibrous materialsHandle is comfortable to hold and has a thumb depression for a secure gripHole in the handle for attachment of a lanyardCompletely non-metallic and non-absorbent, making this a perfect item for EOD personn

Made from reinforced composite polymerPocket sized tool enables quick and powerful pressure point restraining and disarming techniquesEasily pocket carry - compact and low profile signatureErgonomic feel and finger placement for maximum grip strengthIndex finger loop for added retention ability and physical protection - doubles as wrenchNot to be used as a “knuckle duster” or a punching device

HXB

RAIL COVERS

G-CLAMP

PARTS & UPGRADES 53

Hybrid Expandable Baton (Composite Polymer And Steel)

Multiple Purpose Polymer Pliers For Forensics /Eod /Hazma

Full Picatinny Rail Covers

Our expandable baton is a powerful and super light self defense productTubular shafts are molded from space age composite polymer, the smallest and last to expend shaft is reinforced by steel insert and a steel tipHybrid structure of steel and polymer benefits in loss of weight, ultimate corrosion resistance and bit of flexibility to the first two tubular shafts thus giving it some whip like strokeGrip is over molded and bonded with non slip rubberThe three separate sections expand to an ideal 22inches/56cm with just a flick of the wrist.Folded carry position is just 9inches lengthWeights 270 gram / 0.6 LbOnce expanded, the baton will remain securely locked in place until you release it by bringing the tip down on a hard surfaceTungsten carbide sharp tip for glass breaking At the bottom endIncludes a ballistic nylon holster to fit on beltor MOLLE system vests

Keeps your hand away from danger, while allowing lifting, moving or manipulating an object.Made from composite material non magnetic, heat isolating, chemical resistanceHeat resistance up to 150C/302F constant and 250C/482F short durationLift up to 10 kilo/22lbsErgonomic design

Tough, polymer cover slides over picatinny railsProtect shooter’s hand from sharp edges of unused rails and heat emitted by the barrelShield exposed rails from damageMakes rail less likely to snag clothing and equipmentGives the rounded contour of a smooth, circular hand guardHelps shooter maintain better weapon controlPre-segmented construction for ease in cutting to length to custom fitMultiple sections can be mounted one after the other for smooth, visually continuous cover on longer handguards

7.62

5.56

9 mm0.22

SL-1BUNGEE

DEKER

SAFETY RODS

Sl-2

May be attached to a single sling swivel or to two swivelsSuitable for commando-style carrying / slinging / grippingEnables effective operation of the rifleProvides a comfortable, steady firing grip

Prodder for detecting land mines, explosive devices & trip wires convenient & effective operation maximum functionality israel army design extremely tough and simple made from spring steel.Length closed: 550mmLength open: 1000mmWeight: 875g

The perfect solution for safe firearms training & storageSecurity blocks both barrel and chamber to prevent A live round from being inadvertently chamberedBright colors for enhanced visibilityAK-47 rod fits the AK-47AK-16 fits the M16/M4/AR15MP-9 rod fits the MP-5 or any 9MM pistol

54 PARTS & UPGRADES

EOD Prodder

Polymer Safety Rod

Specially built for the IDF army snipers Machined from 6061 billet aluminum including the rings as a solid piece Super sturdy and strong and hard coated thick anodize 30 mm mount comes with quick detach 34 mm comes with Allen bolts

BUC

SD34/30

FD-203

PARTS & UPGRADES 55

Bullet Catcher

Telescope Mount

M-203 Stand Alone Conversion Kit

Designed especially for use in tactical trainingEasy to assembleImproves gas retraction when blanks are usedPositively prevents accidental firing of live roundsBullet catcher physically blocks (absorbs) up to 3 accidentally fired bulletImproves safety, saves lives

Provides two Picatinny rails for mounting tactical laser&light devicesTight fit of adaptor ensures the stability and accuracy of all laser & optical devicesPrecisionmachined from aviation-grade anodized aluminum stockDurable, lightweight constructionEasy to fit and dismantleSecured by hex (“Allen” type) boltsNo modification or gunsmithing required

Designed especially for use in tactical trainingEasy to assembleImproves gas retraction when blanks are usedPositively prevents accidental firing of live roundsBullet catcher physically blocks (absorbs) up to 3 accidentally fired bulletImproves safety, saves lives

Cutaway view after receiving 3 bullets

56 TARGET SYSTEMS

RTS-1 Advanced Portable Live Ammunition Training System

No metal parts, no ricochets. Ricochets are the second risk factor during the shooting practice (the first, off course, is a direct hit). The RTS Target parts are all made from special polymers ensuring the safety of the shooter even when shooting from a point-blank range.Maintains its shape and form. Cardboard and paper based targets lose their forms after one practice. The RTS Target is made from a unique self-sealing polymer which allow bullets to pass thorough with minimal damage. The RTS Target maintains its shape even after thousands of hits and in all weather conditions.Easy to set up, easy to store. The RTS Target is lightweight, easy to assemble, and takes very little space when stored.Universal usage. The RTS target is great for indoor and outdoor ranges, it is used for rifle and handgun practices, and it is used for law enforcement, military and recreational training.Sensitivity may be adjusted so that target will drop with one hit or only with a rapid succession of hitsThicker targets available for assault rifle training (military grade ammunition)Absolutely no ricochets! RTS targets are completely safe-even at point blank range!Target service life: at least 2,000 hitsRTS reactive targets are sold as a complete system. Replacement parts are available upon requestUsed targets can be recycled for partial refund (please contact your dealer for additional information)Available in different colors

Uses RTS-1 targets to count down the hitsFully portable and lightweight6 AA batteries operatedLarge LED screen enables the shooter to view target hit in real timeControls up to 9 targets simultaneouslyUnlimited fire rate counting (counts full auto from any gun)Wireless up to 250 meters between targets, no numeratorTested to comply with FCC starndardAvailable in Differrent colors

Self Healing Reactive Target System