Case Erectors Case Sealers Product Settlers Tray/Bliss Formers

MARQ Packaging’s Case Erector Bottom Sealer with Bundle Hopper is a design that features added versatility while maintaining the high standard of quality and performance expected in a MARQ machine. Its superior style of bundle hopper is easily accessible for adjustments and servicing and reduces the amount of lifting required by the operator.

This horizontal-feed hopper allows cases to be erected with top and bottom vacuum cups to ensure positive erecting of the case. Erecting cases in the horizontal position gives you the added benefit of using opposing vacuum cups to open the case. All flap folding and case handling is done outside the machine, which means that maintenance and changeover is accomplished easily without interference.

Multiple stacks of knockdown cases can be placed onto the hopper where they will automatically feed into the machine. A bottom flight lug chain and one upper flight lug chain convey the case through the erector. MARQ case erectors/sealers are available in standard, medium and large frame models depending on customer application.

Talk to a MARQ representative to see why this machine could work best for your application.

HPE-NSCase Erector Bottom Sealer With

Bundle Hopper

Case Erectors Case Sealers Product Settlers Tray/Bliss Formers

* Machine should not be washed down or subjected to conditions causing moisture

condensation on the components.

* Optional stainless steel construction with NEMA 4 for washdown environments is

available.

* Each machine is designed and based on the customer’s application and case

size.

* Machines are also available if the case is above or below the stated minimum or

maximum. Please call factory for specfics.

Machine FeaturesMachine Specif ications

Top & Bottom Vacuum Cups• Secure and open knockdown

case• Consistently opens each case

squarely

Bundle Hopper• Allows placement of several

stacks of knockdown cases• Ergonomically friendly

Touch Screen• Helps make changeovers an

adjustments quick and easy

RIGHT BLANK GUIDE

15"

24" STACK

BLANK SUPPORT &HORIZONTAL TRANSFER CHAIN(PLACED 24" STACK OF BLANKS

IN POSITION FOR TRANSFERINTO CASE ERECTOR.)

11 1/2"-17 3/4"

VACUUM CUP TRANSFER ASSEMBLY(TRANSFERS TOP BLANK INTO ERECTOR)

TOP SECTION

INFEED BELT ASSEMBLY

52 3/8"

11"

21 13/16"CONSTANT EDGE

52 3/8"

MAIN ARCH

80 3/4" HOPPER

20"

CHAIN RUNNER

LEFT BLANK GUIDE

MAIN AIR

DIRECTION OF FLOW

40 1/2"-46 3/4"

ADJ. DECKHEIGHT

TOP MAJOR FLAP FOLDER

RIGHT RAILHANDWHEEL ADJ.

LEFT RAILHANDWHEEL ADJ.

MOTORIZED TOP SECTION

HOPPER SUPPORT FRAME

MAIN ELECTRICAL(DIRECT LOGIC PLC)

38"MARQ STDGUARDING

71 3/8" MACHINE 28"

STACK LOAD AREA

24" CONV.HEIGHT

CUSTOMER CONVERYOR

BOTTOM FLIGHT BARHANDWHEEL ADJ.

FUNNEL DROPCASE TURNER (OPTIONAL)

TOP RAIL HANDWHEEL ADJ.

R36"

LIGHT STACK BEACON(OPTIONAL)

TAPE HEAD

R23 3/8"

GEN 3 HOPPER

100 3/8"

R32"

Case RangeFormed Case

Length 10.00” min 20.00” maxWidth 8.00” min 19.00” maxHeight 6.00” min 15.00” max

Knockdown SizeLength 18.00” min 35.00” maxWidth 12.00” min 37.00” max

Heavy Duty Construction• Frame is 3/16” steel construction• KEYKOTE 36 (Plated Parts)• Designed for 24/7 Operation• Standard, medium and large frames available• Polycarbonate guarding package

(Custom design requests also available)

Flexible/Fully Automatic/ Versatile• Erects and seals a wide range of cases• Flaps can be sealed with glue, tape or a

combination of both• Top and bottom flight lugs guide the cases• Right-Hand or Left-Hand controls are available• Available Tape heads: 3M, Bemis, Intertape,

central & Dekka• Available glue units: Nordson, ITW

Outboard Tape Head• Easy tape roll replacement

Components Available Locally• Allen Bradley, Square-D, Numatics, Festo, Ross,

Direct Logic & Banner

Operating ConditionsUse in dry, relatively clean environment at 40°F to 120°F (5°C to 49°C) with clean, dry boxes.

Power RequirementsElectrical: 230V 3 PhasePneumatics: 80PSIG (6.5 BAR gauge pressure), 60 CFM Max at maximum cycle rate

Operating RateUp to 40 cases per minute depending on the case length.

Case Specification175 to 275 P.S.I. test, single wall A, B, C flute