brelko presentation - end user presentation
TRANSCRIPT
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Company Profile• Founded in 1987 / Selby, Johannesburg – South Africa.• BRELKO designs and manufactures conveyor belt cleaning equipment for a trouble-free flow of materials at
transfer and load points. This is backed up by an installation and maintenance package including a 24 hour call out service.
• We have over 23 years experience as a supplier and advisor on spillage control to the bulk materials handling industry and offer proactive and ongoing maintenance for preventative spillage control and optimum belt cleaning.
• We supply and service our products throughout the world, with branches in the United Kingdom and the United States, our master distributors in Australia and Greece, and agents located in more than 23 countries.
• We are accredited with ISO 9001:2008 and OHSAS 18001:2007 certification and are members of the Institute of Materials Handling and Conveyor Manufacturers Association.
• The company is B-BBEE accredited.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Corporate Bodies• EN ISO 9001:2000
DEKRA-ITS Global Quality & Management Certification Services
• O.H.S.A.S. 18001DEKRA-ITS Global Health & Safety Certification Services
• EmpowerDexBBBEE Economic Rating Agency. (Level 4)
• C.M.A. Conveyor Manufacturers Association of South Africa LTD.
• S.A.I.M.H. South African Institute of Materials Handling
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Material Reference List
• Ash & Coal
• Steel
• Iron Ore
• Platinum
• Gold
• Diamonds
• Grain, Cereals, Sugar, Raw Cane
• Wood & Paper
• Glass
• Hard Rock Mines (Quarries)
• Sand & Stone
• Fertilizers
• Alumina
• etc.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Training Facilities• BRELKO has newly commissioned state of the art training facility.• Providing both Sales and Service instruction.• Facility includes
o Permanent product display.o Equipment for hands on training.
• BRELKO’s staff, end user staff and agent staff are all encouraged to make use of the facilities.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Production Facilities• BRELKO has a complete in-house production facility featuring full facilities for:
o Cuttingo Drillingo Grindingo Weldingo Polyurethane productiono Sand Blastingo Spray Painting
• ISO 9001 certified for quality management.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Application• BRELKO sales and project teams:
o Are backed by technical, service and research and development departments.o Form the vital link between the individual requirements of customers and our product range.o Providing their assistance through the stages of planning, installation and after sales service.
Research, Design and Product Development BRELKO – Mobile Service
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Spillage
Carryback
Airborne Dust
Ever since conveyors have been used to transport bulk materials, materials escaping from conveyors as spillage and leakage from transfer points, carryback that adheres to the belt past the discharge point or in the form of airborne dust. Left unchecked, fugitive material represents and ever increasing drain on a conveyors/plants efficiency, productivity and profitability. Material lost from the conveyor system costs the plant in a number of ways; the following are just a few:
• Reduced Operating Efficiency.• Increased Conveyor Maintenance Costs.• Reduced Plant Safety.• Lowered Employee Morale/• Diminished Quality.• Heightened Scrutiny from Outside Groups.
and
• Airborne Dust, carried off-premises.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Anatomy of a Belt Scrapero Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeAnatomy of a belt scraper - mounting components
STANDARD MOUNT TORSION MOUNT
PARALLELTORSION MOUNT
TWIST TENSIONER(FAR SIDE BEARING)
TWIST TENSIONER(NEAR SIDE)
SPINDLE
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeAnatomy of a belt scraper – carrier shaft
SINGLE ROWCARRIER SHAFT
DOUBLE ROWCARRIER SHAFT
CARRIER SHAFTOFF-SET PLATES
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeAnatomy of a belt scraper – Blades vs. Torsion Holders
E101/E151 and
E901 PU BLADE
E251/E351COMPOSITE PU BLADE
E951COMPOSITE PU BLADE
E911PU BLADE
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeAnatomy of a belt scraper – Blades vs. Torsion Holders
E205/E305 TORSION HOLDER
E255/E355TORSION HOLDER
E705/E805TORSION HOLDER
E955TORSION HOLDER
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Anatomy of a Belt Scrapero Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E601Heavy Duty Pre-primary Belt ScraperAPPLICATIONS: As a Pre-Primary Scraper, working in the head pulley zone, not in contact with the belt. Used in conjunction with BRELKO Primary and Secondary scrapers. Particularly suited for mud-rush and severe carry back situations. Suitable for all types of conveyor belts and metal fastener systems.
FEATURES: Adjustable BRELKO torsion twist tensioners allow the scraper to maintain a constant pressure against the material flow, are self adjusting and allow the
scraper to deflect away from any obstruction, as a significant safety feature. Multi-blade construction in wear resistant steel for impact situations or ceramic blades for non-impact high abrasion situations or conditions. Scraper adjustment is such that the blades do not contact the belt, but only operate when the carryover material is excessive. Compact torsion twist tensioners for easy adjustment. Chute side mountings for easy adjustment and installation. Robust and streamlined scraper construction prevents material build up on the scraper.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E601 : Work Zone
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E901Multi Blade Head Pulley Belt ScarperAPPLICATIONS: As a Head Pulley Scraper, working directly on the head pulley. As a Primary Scraper, when wet and sticky materials are conveyed. Can be used as the only scraper when space is restricted. Suitable for all types of conveyor belts and metal fasteners systems.
FEATURES: BRELKO torsion twist tensioners allow the scraper to maintain a constant pressure on the belt, are self adjusting and allow the scraper to deflect away
from any obstruction, as a significant safety feature. Specially formulated polymeric blades give maximum life and keep the possibility of damage to belt repairs, splices and metal fasteners to a minimum. Patented V-base blades mounting makes blade changing simple. Multi-blade construction allows individual blades to deflect for minor obstructions and adapt to belt profile. Streamlined scraper construction prevents material build up on the scraper.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E911Heavy Duty Multi Blade Head Pulley Belt ScarperAPPLICATIONS: As a Heavy Duty Head Pulley Scraper, working directly on the head pulley. As a Head Pulley Scraper, when wet and sticky materials are conveyed. Can be used as the only scraper when space is restricted. Suitable for larger pulley diameters and all types of conveyor belts and metal fasteners systems.
FEATURES: BRELKO torsion twist tensioners allow the scraper to maintain a constant pressure on the belt, are self adjusting and allow the scraper to deflect away
from any obstruction, as a significant safety feature. Specially formulated polymeric blades give maximum life and keep the possibility of damage to belt repairs, splices and metal fasteners to a minimum. Slide over blade mounting makes blade changing simple. Multi-blade construction allows individual blades to deflect for minor obstructions and adapt to belt profile. Streamlined scraper construction prevents material build up on the scraper
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E951Extra Heavy Duty Composite Multi Blade Head Pulley Belt ScarperAPPLICATIONS: Heavy Duty Primary Cleaning. High speed and steel cord belts. Selection of blade material for hard rock or small particle low impact materials. Spliced conveyor belts. Corrosive conditions. Used in conjunction with BRELKO Secondary Scrapers.
FEATURES: Ceramic or Tungsten blade holders with Boron (B4C) and Tungsten Carbide (T3) inserts for long life. Compact torsion twist tensioners for easy adjustment. Chute side mountings for easy adjustment. Low friction and heat generation, robust construction.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E955Premium Multi Blade Head Pulley Belt ScarperAPPLICATIONS: As a Head Pulley Scraper, working directly on the head pulley. As a Head Pulley Scraper, when wet and sticky materials are conveyed. Can be used as the only scraper when space is restricted. Suitable for all types of conveyors belts with vulcanized joints. FEATURES: BRELKO torsion twist tensioners allow the scraper to maintain a constant pressure on the belt, are self adjusting and allow the scraper to deflect away
from any obstruction, as a significant safety feature. Pre-Tensioned blades restrict forward movement and reduces required pressure against the belt for less wear. Patented V-base blades mounting makes blade changing simple. Multi-blade construction allows individual blades to deflect for minor obstructions and adapt to belt profile. Streamlined scraper construction prevents material build up on the scraper.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E901, E911, E951 and E955 : Work Zone
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E101 & E151Multi Blade Primary Belt ScarperAPPLICATIONS: As a basic scraper when wet and sticky materials are conveyed. May be mounted directly on the head pulley. Can be used individually or in tandem as the secondary scraper. Suitable for all types of conveyor belts and metal fastener systems.FEATURES: Specially formulated polymeric blades give maximum life, and keep the possibility of damage to belt repairs, splices and metal fasteners to a
minimum. Patented blade design ensures optimum combination of flexibility and stiffness to adapt to belt profile. Patented V-base blade mounting makes blade changing simple. BRELKO self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also
available is the standard adjustable mounting. All metal components can be made from corrosion resistant materials.
E101 E151
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E101 : Work Zone
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E151 : Work Zone
100mm MIN.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E205 & E305Multi Blade Secondary Belt ScarperAPPLICATIONS: Universal choice for all normal cleaning applications, not suitable for mounting directly onto the head pulley. Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.
FEATURES: Patented V-base torsion holder makes blade changing simple. Pre-Tensioned torsion holders reduces the required pressure against the belt resulting in less wear. BRELKO self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also
available is the standard adjustable mounting. All metal components can be made from corrosion resistant materials. Robust construction for longer life.
E205 E305
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E251 & E351Heavy Duty Composite Multi Blade Secondary Belt ScarperAPPLICATIONS: As a Heavy Duty Secondary Scraper when wet and sticky materials are conveyed. Not suitable for mounting directly onto the head pulley. Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.
FEATURES: Patented V-base blade mounting makes blade changing quick and simple. Pre-Tensioned torsion holders reduces the required pressure against the belt resulting in less wear. BRELKO torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extend adjustment intervals. Also available is the
standard adjustable mounting. Specially formulated composite blades give maximum life, and ensure accurate assembly and a clean running scraper. All metal components can be made from corrosion resistant materials
E251 E351
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E255 & E355Multi Blade Secondary Belt ScarperAPPLICATIONS: Universal choice for heavy duty cleaning applications. Specially suited for wider high speed belts. Not suitable for mounting directly onto the head pulley. Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to
pulley eccentricity, thereby ensuring constant pressure with the belt. Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.
FEATURES: Patented V-base torsion holder makes blade changing simple. BRELKO self adjusting torsion mountings allow the scraper to maintain a constant pressure on the belt and greatly extends adjustment intervals, also
available is the standard adjustable mounting. All metal components can be made from corrosion resistant materials. Robust construction for longer life.
E255 E355
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E705 & E805Multi Blade Secondary Belt ScarperAPPLICATIONS: Specially designed for easy installation on all belts up to 750mm wide. Can be installed where there is not enough space for other scrapers. Not suitable for mounting directly onto the head pulley. Use in conjunction with torsion arm mountings to accommodate different belt thicknesses on the same conveyor and excessive belt movement due to
pulley eccentricity, thereby ensuring constant pressure with the belt. Selection of correct blade material gives optimum blade life under all operating conditions and conveyed materials.FEATURES: Patented V-base torsion holder makes blade changing simple. Pre-Tensioned torsion holders reduces the required pressure against the belt for less wear. All metal components can be made from corrosion resistant materials. Robust construction for longer life.
E705 E805
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E205, E251 and E255 : Work Zone
100mm MIN.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E705 : Work Zone
50mm MIN.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E305, E351 and E355 : Work Zone
100mm MIN.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product RangeModel E805 : Work Zone
50mm MIN.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E401 (E405 new release)V-Plough Belt ScarperAPPLICATIONS: The E401 V-Plough is designed to be easily installed in a trailing configuration on the inner surface of a conveyor belt return strand just before any nip
position, to remove and thus prevent any material which has spilled onto the inner surface from being carried into the nip. Where material can only be discharged on one side of the conveyor belt or the belt is reversible use the E501 Angle Plough.
FEATURES: Unique track mounted scraping blade facilitates very easy and quick blade change. Parallel tri-link mounting allows the plough to move freely thus maintaining constant contact with the belt. Specially formulated PU blades ensure maximum blade life and minimum belt wear. Unique bolted assembly results in compact packaging for easy transport and installation. Can be mounted on the top, bottom or inside of the stringers.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Model E501 (E505 new release)Angle Plough Belt ScarperAPPLICATIONS: The E501 Angle Plough is used as an alternative to the E401 V-Plough when the material scraped off the inner belt surface can only be discharged to one side of the belt. For use on reversible belts.
FEATURES: Unique track mounted scraping blade facilitates very easy and quick blade change. Parallel dual-link mounting allows the plough to move freely thus maintaining constant contact with the belt. Specially formulated PU blades ensure maximum blade life and minimum belt wear. Unique bolted assembly results in compact packaging for easy transport and installation. Scraping angle can be variable between 45° - 60°. Can be mounted on the top, bottom or inside of the stringer. Universal swivel mounting allows the plough to be set to scrape to either side of the belt.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Keyskirt Size -1, -2 and -4Chute Sealing SystemAPPLICATIONS: An effective chute sealing system designed to control spillage at conveyor load areas. Suitable for all belt conveyors carrying material less than 75mm particle size.
FEATURES: Patented mounting track system results in simple installation and subsequent skirt rubber replacement. Self-cleaning grooves trap spillage allowing it to be carried away by the belt. Low contact area reduces wear and friction. No adjustment required. Continuous flexible seal accommodates belt movement. Colour coding for easy skirt grade identification.
GRADES: Standard - 55SH(A) LHB (Soft) - 40SH(A) Heat Resistant - 55SH(A) / Fine Material 180°C (356°F) Max.
- 55SH(A) / Coarse Material 220°C (428°F) Max. F.R.A.S.O.R - 55SH(A) / Fire Retardant, Anti Static & Oil
Resistant. Waste Works - 60SH(A) Grey Food Grade - 60SH(A) / Natural Rubber (FDA Approved). Clear Chemical - 60SH(A) / Polyurethane.
OFF-SET TRACK
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Keyskirt Size -3Chute Sealing SystemAPPLICATIONS: An effective chute sealing system designed to cope with spillage of large lump material where Size 1, 2 and 4 Keyskirt are liable to severe damage. Suitable for lump sizes over 150mm.
FEATURES: Robust, cut and abrasion-resistant polyurethane sealing strip. Patented mounting system for easy strip replacement. Simple mounting allows easy and quick adjustment for sealing strip wear. Tongue and groove allows joining of more than one length.
GRADES: Standard - 95SH(A). Fire Retardant - 95SH(A).
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Universal FeedbootBelt Support SystemAPPLICATIONS: A load point belt support system which eliminates conventional conveyor idlers. Suitable for all belt conveyors handling bulk solids with a particle size less than 50mm and low impact load conditions.
FEATURES: Designed to provide belt support in the load area, thus eliminating belt sag between idlers. Wing panels can be individually adjusted for optimum conveyor troughing angle from 0° to 50°. Accurate belt support allows chutes and seals to be positioned to control and eliminate spillage and dust escape at the load points. Sliding surfaces lined with low friction, long life UHMW polyethylene sheets.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Combination FeedbootBelt Support SystemAPPLICATIONS: A load point belt support system providing flat belt supporting surfaces mounted on an impact absorbing structure. Suitable for all bulk conveyor systems with medium to severe impact conditions and particles up to 150mm in size. Replace conventional impact idlers in load area.
FEATURES: Flat belt support surfaces eliminate sag between idlers enabling optimum chute sealing design and operation. Load point spillage and dust escape is controlled and eliminated. Rubber impact cones and mountings allow belt deflection under load in centre area whilst maintaining seal at belt edges. Sliding surfaces lined with low friction, long life UHMW polyethylene sheets.
IMPACT CONES
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Hi-impact System (BTA)Heavy Duty Belt Support SystemAPPLICATIONS: A load point belt support system designed to offer maximum impact absorbing capabilities. Suitable for all belt conveyors where large particle size and severe impact load conditions occur.
FEATURES: Unique torsion arm mountings absorb impact loads and are self damping. Rubber disc impact rolls help to extend belt life. Support frame is available in standard 2000mm length and fitted with 5 strings of idler rolls. Support frame is designed to replace existing roller cradles and fixed to conveyor stringers. Open construction makes clean up of spillage and roll replacement very easy. Garland idler roll arrangement promotes correct belt tracking.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
BELT TRACKING SYSTEM3 / 5 ROLL TROUGHING FRAME
APPLICATIONS:• Install the Belt Tracking System on the troughing side of the belt to centralise a misaligned belt, prevent spillage, decrease downtime, decrease maintenance and extended belt life.FEATURES:• Easy installation.• Low maintenance.• Vibration free rolling action.• Simple design.• Operates in all conditions, except on reversing belts.• Manufactured according to S.A.B.S. standards.• Fully sealed construction of bearing housing prevents ingress of material into the bearing unit.• Robust construction for longer life.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
BELT TRACKING SYSTEMRETURN FRAME
APPLICATIONS:• Install the Belt Tracking System on the return side of the belt to centralise a misaligned belt, prevent belt edge damage, prevent structural damage, decrease downtime, decrease
maintenance and extended belt life.
FEATURES:• Easy installation.• Low maintenance.• Vibration free rolling action.• Simple design.• Operates in all conditions, except on reversing belts.• Manufactured according to S.A.B.S. standards.• Fully sealed construction of bearing housing prevents ingress of material into the bearing unit.• Robust construction for longer life.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Range
Air CannonBlockage Removal and Material Bulk Flow Activator SystemsAPPLICATIONS: Used to remove and prevent blockages and build up of bulk material in silos, bins, hoppers, chutes etc. Resolve bulk flow problems where other methods are expensive, use more energy, damage the storage vessel, are excessively noisy and unreliable.
FEATURES: Unique diaphragm main valve results in extremely rapid operation and therefore more effective size for size. Only one moving part. Easy maintenance, no need to remove air cannon. Safe to operate and maintain.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered SolutionsSpillage, Carryback and Airborne Dust
Product Range• BRELKO Scrapers:
o Pre-primary (head pulley) Belt Scraper (reference only!!).o Head Pulley Belt Scrapers.o Primary (Basic) Belt Scraper (reference only!!).o Secondary Belt Scarpers.o Return Scrapers.
• Chute Sealing Systems.• Transfer Point Belt Load Support Systems.• Conveyor Belt Tracking Systems.• Blockage Removal and Material Bulk Flow Activator Systems (Air Cannons/Blasters).• Product Accessories.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Product Accessories
Accessories Full range of Spares and Accessories from nuts, bolts, washers to BRELKO spares and components.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered Solutions
WHAT IS KNOWN ABOUT BELT SCRAPERS?
• Many competitors:
• Suspicion surrounds products:o Does it work?o Not another scraper!
• Performance:o Always being questioned.
• Other outside influences:o Worn belts / No covers.o Different belt thicknesses.o Belt tracking.o Adjustment / Maintenance.
• Engineers flair:o Design there own scrapers:
• Market is price conscious:
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered Solutions
AN EFFICIENT BELT SCRAPER WILL:
INCREASE BELT LIFE.
INCREASE EFFICIENCY.
EXTEND ROLLER LIFE.
COST SAVING.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered Solutions
What is often not so well known is the magnitude of the problem and by way of illustration let’s look at the following example:
Removal of last 1/10th mm residue film, if only 30% of this film drops from the lower belt face, this means in case of a 1000 millimetre wide conveyor belt at a speed of 2 meter per second (400 FT/Min):
In 1 hour - 0.18 cubic MetersIn 1 Day (16 operating hours) - 2.88 cubic MetersIn 1 Year (250 operating days) - 720 cubic tons
Coal pour density ca, 1.2 tonnes per m²
720 x 1.2 = 864 tonnes
864 ÷ 20 = 43 trucks at 20 tonne capacity
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Engineered Solutions
43 Trucks each of 20 tonne capacity!!
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Material Build-up and its effects:Design 1: Blade Perpendicular to Belt (scraping)
-1-New Blade,
leading edge is square.
-2-Effectively removes oncoming
material, achieves efficient cleaning.
squareleading edge
squareleading edge
roundedleading edge
roundedleading edge
-3-Material build-up induce,
leading edge of blade to become rounded.
-4-Increased material, mass deterioration of blade edge allowing
material to pass blade, start of inefficient belt cleaning.-5-
Inefficient belt cleaning.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
INCREASING PRESSURE ON THE BLADE HAS NOEFFECT ON IMPROVING CLEANING EFFICIENCY
1. Oncoming material must stop it’s momentum completely and fall away from the blade vertically.2. Material build-up occurs not only on the scraper blade but also in front of the blade.3. With the movement of the blade and material, mass turbulence is created in the corner of the leading
edge of the blade.4. An entrainment angle is then produced which draws the oncoming material and increase belt surface
wear.5. This produces two negatives: inefficient belt cleaning, and increased belt surface wear.6. Increasing pressure on the blade has no effect on improving cleaning efficiency.
1
2
3
4
rounded leading edge
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Material Build-up and its effects:Design 2: Blade in Trailing Position (wiping)
-1-New Blade,
leading edge is square.
-2-Effectively removes oncoming
material, achieves efficient cleaning.
squareleading edge
squareleading edge
roundedleading edge
roundedleading edge
-3-Material build-up induce,
leading edge of blade to become rounded.
-4-Increased material mass, deterioration of blade edge allowing
material to pass blade, start of inefficient belt cleaning.
-5-Inefficient belt cleaning.
High degree of pressure against belt.
Blade Material: Polyurethane or Metal.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
INHERENT DESIGN FACTOR
1. Inherent design problem – already has an entrainment angle which will accelerate the drawing of oncoming material between the blade and the belt.
2. Increasing pressure on the blade has no effect on improving cleaning efficiency.3. The design has a further inherent problem in that the blade support arms causes materials build-up.
INCREASING PRESSURE TO IMPROVE CLEANINGEFFICIENCY – HAS NO BENEFIT!
entrainment angle
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Material Build-up and its effects:Design 3: Blade – Leading Edge Technology
-1-Deflects the material from the belt.
-2-Creates no entrainment angle!
-3-Blade will wear at the angle at which they approach the belt and the leading edge of the blade retains
original profile throughout the life of the blade.
-4-The design requires low amount of pressure on the blades to
efficiently clean the belt.
-5-Low pressure means efficient belt cleaning and longer life from blade and belt covers.
BRELKO Scraper Design eliminates the inherent problems of other principles of cleaners by inclining the blade into direction of travel.
Blade Material: Steel or Tungsten.
squareleading edge
squareleading edge
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Individual Scraper / Torsion Unit:
Two Arm Support Design with Double Torsion Units and “V-track” slide mounting
TorsionRubbers
V-track SlideMounting
Twin ArmSupport
1. Eliminates blades sideways oscillations and twisting.
2. Low blade and holder mass reduces impact forces.
3. Quickly returns to belt surface after deflection.
4. Close contact is maintained with belt surface irregularities –
results in better cleaning efficiency.
TorsionHolder.
Blade /Tip Holder.
Torsion Unit – Square Principle.8 Rubber Pips in an rolling compression, causing a winding (torsion) spring effect.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Leading Edge Directly Above Fulcrum Point:
Leading Edge of blade directly above fulcrum point, therefore this allows the blade to deflect on a radius
away from the belt surface allowing the protrusion to pass without snagging..
PROBLEM SOLUTION
Rigid blade, blade holder damage, can lead to belt
damage
protrusion / clip joint etc.
BeltTravel
BeltTravel
protrusion / clip joint etc.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
Technical Advantages:
Torsion Unit:• Automatically adjust to compensate for blade wear.
• Fully sealed construction of torsion holder prevents material build-up or ingress into spring unit.
Holder and Blade Design:• Compact design, single unit, only needs installation space of 350mm x 180mm.
• Robust Construction.
• Range of Scrapers available to suit any application.
• Quality Product - ISO 9001 certified.
• Automatic Adjustment.
• Advanced Pre-tensioned Torsion Holder design.
• Extend blade life from materials available (TC /T3).
• Blade deflects away from metal clip joints.
• Lower belt contact pressure, high cleaning efficiency.
• Cost effective.
• Competitively priced.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E205 vs. E201
155
100
160
95
BRELKOE205/E305
BRELKOE201/E301
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E205 vs. E201
E205/E305 E201/E301
CAST TIP HOLDER CwTC or T3 BLADE
TORSION HOLDER ARM & BASES GLASS
REINFORCEDHI-IMPACT NYLON
TORSION BARE205, INCORPORATED
INTO TORSION ARM
NATURALRUBBER PIPS
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E205 vs. E201
E201/E301
COMPONENT LIST:
1. TORSION HOLDER ARM.2. TORSION HOLDER BASE – LH.3. TORSION HOLDER BASE – RH.4. TORSION BAR.5. RUBBER PIP - 1.6. RUBBER PIP - 2.7. RUBBER PIP - 3.8. RUBBER PIP - 4.9. RUBBER PIP - 5.10.RUBBER PIP - 6.11. RUBBER PIP - 7.12.RUBBER PIP - 8.13.END CAP - A.14.END CAP - B.15.O-RING - 1 (NOT SHOWN).16.O-RING - 2 (NOT SHOWN).17.BLADE HOLDER.18.BLADE.19.BLIND RIVET - 1.20.BLIND RIVET - 2.>TOTAL No. OFF PARTS = 20
DID YOU KNOW?R 10, 000.00+ IS SPEND A MONTH ON SILICONE GREASE.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E205 vs. E201
E205/E305
COMPONENT LIST:
1. TORSION HOLDER ARM INCORPORATING TORSION BAR.
2. TORSION HOLDER BASE (LH & RH).3. RUBBER PIP - 1.4. RUBBER PIP - 2.5. RUBBER PIP - 3.6. RUBBER PIP - 4.7. RUBBER PIP - 5.8. RUBBER PIP - 6.9. RUBBER PIP - 7.10.RUBBER PIP - 8.11. BLADE HOLDER.12.BLADE.13.BLIND RIVET - 1.14.BLIND RIVET - 2.>TOTAL No. OFF PARTS = 14
SILICONE GREASE, NOT REQUIRED!FULLY SEALED CONSTRUCTION OF TORSION HOLDER PREVENTS INGRESS OF MATERIAL INTO THE SPRING UNIT.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E205 vs. E201
E205/E305
FEATURES:
Pre-set scraping angle, initial belt contact pressure eliminated
as a result of the Pre-tensioned Torsion Holder Arm.
IMPROVEMENTS:
Pre-tensioned Torsion Holder, reduces belt contact pressure. Steeper front skirt, material run-off angle 70°. Fully sealed construction of Torsion Holder prevents material
build-up or ingress into the spring unit.
BRELKOE205/E305
E201/E301
E205/E305
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
120
105 95
125
E705 vs. E701
BRELKOE705/E805
BRELKOE701/E801
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E705 vs. E701
E705/E805 E701/E801
CAST TIP HOLDER CwTC or T3 BLADE
TORSION HOLDER ARM & BASES GLASS
REINFORCEDHI-IMPACT NYLON
TORSION BARE705, INCORPORATED
INTO TORSION ARM
NATURALRUBBER PIPS
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E705 vs. E701
E701/E801
COMPONENT LIST:
1. TORSION HOLDER ARM INCORPORATING TORSION BAR.
2. TORSION HOLDER BASE (LH & RH).3. RUBBER PIP - 1.4. RUBBER PIP - 2.5. RUBBER PIP - 3.6. RUBBER PIP - 4.7. RUBBER PIP - 5.8. RUBBER PIP - 6.9. RUBBER PIP - 7.10.RUBBER PIP - 8.11. BLADE HOLDER.12.BLADE.13.BLIND RIVET - 1.14.BLIND RIVET - 2.>TOTAL No. OFF PARTS = 14
SILICONE GREASE, NOT REQUIRED!FULLY SEALED CONSTRUCTION OF TORSION HOLDER PREVENTS INGRESS OF MATERIAL INTO THE SPRING UNIT.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E705 vs. E701
E705/E805
COMPONENT LIST:
1. TORSION HOLDER ARM INCORPORATING TORSION BAR.
2. TORSION HOLDER BASE (LH & RH).3. RUBBER PIP - 1.4. RUBBER PIP - 2.5. RUBBER PIP - 3.6. RUBBER PIP - 4.7. RUBBER PIP - 5.8. RUBBER PIP - 6.9. RUBBER PIP - 7.10.RUBBER PIP - 8.11. BLADE HOLDER.12.BLADE.13.BLIND RIVET - 1.14.BLIND RIVET - 2.>TOTAL No. OFF PARTS = 14
SILICONE GREASE, NOT REQUIRED!FULLY SEALED CONSTRUCTION OF TORSION HOLDER PREVENTS INGRESS OF MATERIAL INTO THE SPRING UNIT.
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
E705 vs. E701
E705/E805
FEATURES:
Pre-set scraping angle, initial belt contact pressure eliminated
as a result of the Pre-tensioned Torsion Holder Arm.
IMPROVEMENTS:
Pre-tensioned Torsion Holder, reduces belt contact pressure. Steeper front skirt, material run-off angle 60°. Fully sealed construction of Torsion Holder prevents material
build-up or ingress into the spring unit.
BRELKOE705/E805
E701/E801
E705/E805
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
160
103
160
103
E255 and E955
BRELKOE255/E355
BRELKOE955
E255/E355 E955
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
PRE-TENSIONED?
NEUTRAL POSITION
PRE-TENSIONED POSITION
PRODUCT and PRODUCT INSTALLATION TRAINING - 09/2011
(E201/E301*) INSTALLATION (E205/E305*)
10 ~ 15mm
STEP -1:By means of spindle nuts adjust the scraper towards the belt surface until all the blades contact the belt surface.
STEP -2:Adjust the scraper one further full turn of the spindle nuts towards the belt. .
STEP -3:Start the conveyor and check if all blades are moving freely and scraping in full contact with the belt surface. If further adjustment is required, stop the conveyor and adjust the scraper one further turn of the spindle nuts towards the belt until all blades are scraping satisfactory.
Step -1
Step -2 Step -3
STEP -1:By means of spindle nuts adjust the scraper towards the belt surface until all the blades contact the belt surface.
STEP -2:Start the conveyor and check if all blades are moving freely and scraping in full contact with the belt surface. If further adjustment is required, stop the conveyor and adjust the scraper half a turn of the spindle nuts towards the belt until all blades are scraping satisfactory.
STEP -2, not required!!