brand assembly instructions - outdoors
TRANSCRIPT
Hunter’s Grill
Model #FSGWBG1000
Customer Service: (888) 837-1380, 8:00am to 5:00pm, Pacific Standard Time,
Monday thru Friday
(Made in China)
Please keep this instruction manual for future reference
Assembly Instructions
BRAND
SC2000314-GW-00– ENG P.1 20131026-V1
Warnings --------------------------------------------------------------------------
Tools required -------------------------------------------------------------------
Component List -----------------------------------------------------------------
Hardware --------------------------------------------------------------------------
Assembly Instructions -------------------------------------------------------
Operating Instructions -------------------------------------------------------
Grill Maintenance ---------------------------------------------------------------
Warranty ---------------------------------------------------------------------------
Contents Page
3-9
10
11-12
13
14-19
20-24
25-26
27-28
SC2000304-OG-00– ENG P.2 20131026-V1
Warnings
Please read Safety and Precaution statements, Grill Maintenance, Leak Testing,
Regulator/ Cylinder connection and Lighting Instructions before using grill the
first time.
Safety Symbols The symbols and boxes shown below explain what each heading means. Read
and follow all of the messages found throughout the manual.
DANGER
Danger: Indicates an imminently hazardous situation which, if not
avoided, will result in serious injury or death.
WARNING Warning: Indicates a potentially hazardous situation which, if not
avoided, will result in serious injury or death.
CAUTION Caution: Indicates a potentially hazardous situation or unsafe practice
which, if not avoided, may result in minor or moderate injury.
SC2000304-OG-00– ENG P.3 20120605-V1
Warnings
DANGER If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open Lid.
4. If odor continues, keep away from the appliance and
immediately call your gas supplier or your fire department.
Failure to follow these instructions could result in fire or
explosion which could cause property damage, personal injury or
death.
DANGER 1. Never operate this appliance unattended.
2. Never operate this appliance within 10 ft (3.05 m) of any
structure, combustible material or other gas cylinder.
3. Never operate this appliance within 25 ft (7.5 m) of any
flammable liquid.
4. If a fire should occur, keep away from the appliance and
immediately call your fire department. Do not attempt to
extinguish an oil or grease fire with water.
Failure to follow these instructions could result in fire or
explosion which could cause property damage, personal injury
or death.
WARNING Combustion by-products when using this product contain chemicals
known to the State of California to cause cancer, birth defects, or other
reproductive harm.
SC2000304-OG-00– ENG P.4 20131026-V1
• The appliance shall not be used on or under any apartment or condominium balcony or deck.
• The appliance shall be used outdoors
only, and shall not be used in a building,
garage or any other enclosed area.
• This appliance is not intended to be
installed or used in or on a recreational
vehicle or boat.
• The appliance shall maintain minimum
36 Inches (91.4cm) from combustible
materials to the sides and back of the
appliance, and the appliance shall not be located or used under overhead unprotected combustible materials.
• This appliance is for outdoor use only and should only be operated in a well-ventilated space. Never operate in an enclosed space, garage or building.
• This appliance is not intended for commercial use.
• This appliance is not for frying turkeys.
• When cooking, the appliance must be on a level, stable noncombustible surface in an area clear of combustible material. An asphalt surface is not acceptable for this purpose.
• Do not leave the appliance unattended. Keep children and pets away from the appliance at all times.
• This appliance is not intended for and should never be used as a heater.
• This appliance will be hot during and after use. Use insulated oven mitts or gloves for protection from hot surface.
• Never attempt to attach this appliance to the self-contained LP gas system of a camper trailer or motor home.
• Carefully follow all instructions in this manual for proper assembly and leak testing. Do not use appliance until leak test has been completed. If leak is detected at any time, turn OFF gas supply and do not use until leak source has been corrected.
• Cooking area should be kept clear and free from combustible materials, gasoline, bottled gas in any form, and any other flammable vapors and liquids. Keep free of obstructions that would prevent ventilation.
• Never try to light appliance with lid closed. The buildup of gas is very dangerous and could cause an explosion.
• The use of alcohol, prescription or non-prescription drugs may impair your ability to properly assemble or safely operate the appliance.
• Do not move appliance when in use. Allow the appliance to cool down completely before moving or storing.
• Never use charcoal briquettes or lighter fluid with this grill.
Warnings
SC2000304-OG-00– ENG P.5 20131026-V1
USE OF LP GAS CYLINDER AND INSTALLATION
BEFORE INSTALLING:
LP GAS CYLINDER • The installation must conform with local codes or, in the absence of local codes,with
the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58; or Natural Gas and Propane Installation Code, CSA B149.1;Propane Storage and Handling, CSA B149.2; or the Standard for Recreational Vehicles, ANSI A119.2/NFPA 1192; and Recreational Vehicle Code, CSA Z240 RV Series, as applicable.
• The LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP-gas cylinders of the US Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods.
• This appliance is designed to operate with a one pound
7.75” or 10.6” high disposable / 16.4 oz. or 14.1 oz.
propane gas cylinder (DOT 39 Cylinder)
• Do not attempt to refill any disposable propane gas
cylinders.
• The cylinder must be installed, transported and stored
in an upright position and should not be dropped or
handled roughly.
• When the appliance is to be stored indoors, the propane
gas cylinder must be disconnected from the appliance.
• When the propane gas cylinder is connected to the
appliance, both must be stored outdoors in a well-ventilated space.
• The propane gas cylinder should never be transported or stored where temperatures can reach 51.C (124.F)
• Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage, or any other enclosed area.
• The propane gas cylinder supply system must be arranged for vapor withdrawal.
• Disconnect the gas propane cylinder when not in use.
CONNECT THE PROPANE GAS CYLINDER Only cylinders marked “propane” may be used.
Note: Some 1lb cylinders may form frost when
near empty.
1. Make sure the control knob is in OFF position.
2. Lubricate the threads of the regulator with
petroleum jelly if necessary. Line up threads
on LP gas cylinder with regulator.
3. Insert and rotate LP gas cylinder clockwise
until they fit snugly together. HAND TIGHTEN
ONLY. Be careful not to cross threads when
screwing in the cylinder. Test for leaks,
see “Leak Test” Section.
Warnings
SC2000304-OG-00– ENG P.6 20131026-V1
Warnings
CAUTION (a) Do not store a spare LP-gas cylinder under or near this appliance;
(b) Never fill the cylinder beyond 80 percent full; and never refill 16.4 oz bottles.
(c) If the instructions in “(a)” and “(b)” are not followed exactly, a fire causing death or
serious injury may occur.
LEAK TEST
Although all gas connections on the grill are leak tested at the factory prior to shipment, a
complete gas tightness check must be performed at the installation site due to possible
mishandling in shipment, or excessive pressure unknowingly being applied to the unit.
Periodically check the whole system for leaks following the procedures listed below. If
the smell of gas is detected at any time you should immediately check the entire system
for leaks.
BEFORE TESTING • Make sure that all packing material is removed from the grill including the burner tie-
down straps.
• Prepare a soap water mixture of one part liquid detergent and one part water. You
will need a spray bottle, brush, or rag to apply the solution to the fittings. For the initial
leak test, make sure the LP cylinder is available and never fill the cylinder beyond 80
percent full.
WARNING DO NOT SMOKE WHILE CONDUCTING LEAK TEST
NEVER PERFORM LEAK TEST WITH AN OPEN FLAME
If it is evident there is excessive abrasion or wear, or the regulator is damaged, it
must be replaced prior to the appliance being operational. The replacement regulator
shall be specified by the manufacturer.
SC2000304-OG-00– ENG P.7 20131026-V1
TO TEST 1. Make sure the control knobs are in the “OFF” position, and turn on the
gas supply.
2. Check all connections at the Gas cylinder, LP gas regulator and supply valve up to and including all connections to the pipe that go to the burners (the diagram shows the point where the soap water mixture is being applied). Soap bubbles will appear where a leak is present.
3. If a leak is present, immediately turn off the gas supply and tighten the leaky fittings.
4. Turn the gas back on and recheck.
5. If it is evident there is excessive abrasion or wear, or the hose is cut, it must be replaced prior to the outdoor cooking gas appliance being put into operation. The replacement hose assembly shall be that specified by the manufacturer. Contact customer service at (888) 837- 1380
Warnings
Points of leak test:
1. Connection point at the manifold
and the regulator outlet.
2. Connection point at regulator
and tubing.
3. Connection point at the Gas
cylinder outlet and regulator inlet.
4. Connection points at control
valves and manifold. ( Under the
Control panel)
SC2000304-OG-00– ENG P.8 20131026-V1
Warnings
WARNING
Natural Hazards -Insects and Spiders A clogged tube can lead to a fire beneath the appliance.
During shipment or storage, it is possible that small Insects and
spiders could find their way into the venturi tubes and make nests
or webs. This could block the flow of gas through the venturi tube
causing a smoky, yellowish flame, or prevent a burner from lighting.
It could even cause the gas to burn outside the venturi tube, which
could seriously damage the appliance. If this occurs, turn off the
gas flow and wait for the appliance to cool. When the appliance has cooled, remove
the burner and clean out the venturi tube with a brush or pipe cleaner. Replace the
burner and be sure that the venturi tube is seated over the orifice located on the gas
valves. Cleaning of the venturi tube should be conducted periodically, especially at the
start of the season.
Note: Damage resulting from blocked venturi tube is not covered under warranty.
SC2000304-OG-00– ENG P.9 20131026-V1
WARNING
Always unfold the grill completely before cooking and lighting
1 Philips & Flathead Screwdrivers
2 Pliers
3 Hex Nut Wrench
Tools Required
SC2000304-OG-00– ENG P.10 20131026-V1
Parts List
1 Lid Handle 1pc
2 Lid Handle Bracket 2pcs
3 Grill Body Assembly 3a: Grill body with hose regulator
assembly – 1 pc
3b: Grill lid – 1 pc
3c: Legs – 1 set
3d: Control knob – 2 pcs
3e: Lighting rod – 1 pc
3f: Lid lock – 1 pc
3g: Heat Shield – 1 pc
3h: Hinge (top) – 2 pcs
3i: Hinge (bottom) – 2 pcs
3j: Steel bracket (front) – 2 pcs
3k: Steel bracket (back) – 2 pcs
3l: Silica washer – 12 pcs
4 Cooking Grate (Left) 1pc
5 Cooking Grate (Right) 1pc
3a 3d
3b 3e
3f 3c
3g 3j
3h& 3i 3k
SC2000304-OG-00– ENG P.11 20131026-V1
3l
3l
Parts List
6 Flame Tamer 2pcs
7 Side Table Assembly 7a: Side Table – 1 pc
7b: Lock Assembly – 1 pc
8 Wheel 2pcs
9 Wheel Cover 2pcs
10 Oil Drip Tray 1pc
11 Plastic Leg Base 2pcs
SC2000304-OG-00– ENG P.12 20131026-V1
7a
7b
Hardware
A Wheel Bolt 2 pcs
B M10 Washer 2 pcs
C M6 * 15mm Bolt 4 pcs
D M6 Washer 4 pcs
E M6 * 55mm Bolt 2 pcs
F Cotter Pin 4 pcs
SC2000304-OG-00– ENG P.13 20131026-V1
Assembly Instructions
SC2000304-OG-00– ENG P.14 20131026-V1
Assembly Instructions
Step 1:
Take out the Grill Body (3)
from the packing box and
keep the grill body in folded
position. Loosen the
screws on legs as following.
Insert these screws through
the center hole of the
Plastic Leg Base(11) and
tighten them firmly.
Step 2:
Insert the Wheel Bolt (#A)
through the Wheel (8) and
Washer (#B) and then
tighten the bolt to the leg
frame of Grill Body (3).
Attach the Wheel Cover(9)
to the Wheel (8).
Screws on legs
#A – Wheel Bolt x 2 pcs
#B – Washer x 2 pcs
SC2000304-OG-00– ENG P.15 20131026-V1
3
9
#A
8
#B 3
9
#A
8
#B
Assembly Instructions
Unfold the Grill as per following figure.
SC2000304-OG-00– ENG P.16 20131026-V1
Step 3A:
Step 3B:
Assembly Instructions
Step 4:
Attach Side Table (7) to Grill Body by using 4 pcs of M6x15mm Bolt (#C) and M6 Washer (#D).
#C–M6x15mm
Bolt x 4 pcs
#D – M6 Washer x 4 pcs
SC2000304-OG-00– ENG P.17 20131026-V1
7
#C & #D
#C & #D
Assembly Instructions
Step 5:
Insert M6x55mm Bolts (#E)
through the Lid Handle
Brackets (2) and Lid Handle
(1). Tighten the the Handle
firmly to the Lid.
Step 6:
Place the Flame Tamer (6)
over the burners and use 4
pcs of Cotter Pins (#F) to
maintain the Tamers in
position.
#E - M6x55mm
Bolt x 2 pcs
#F – Cotter Pin x 4 pcs
SC2000304-OG-00– ENG P.18 20131026-V1
1
2
3
#E
6
#F
Assembly Instructions
Step 7:
Place the Cooking Grates
(4 and 5).
Step 8:
Insert the Oil Drip Tray (10)
under the Grill Body.
Assembly is completed!!!
Before Cooking for the First Time Operate grill 15 minutes with grill lid closed and gas control on HIGH. This will heat-clean
internal components and eliminate odor of oil in grill.
WARNING Always unfold the grill completely before cooking and lighting
SC2000304-OG-00– ENG P.19 20131026-V1
4 and 5
10
Operating Instructions
Unfold Grill Note: Unlock the latch before unfolding the legs
SC2000304-OG-00– ENG P.20 20131026-V1
Step 1:
Step 2:
Operating Instructions
Fold Grill
WARNING Propane Gas Cylinder MUST be detached from regulator before folding the grill
DO NOT fold the grill or move the grill immediately after cooking. Wait for the grill to
cool down completely!
Note: Side table should be completely folded before moving the grill
LOCK the pin and latch before moving the grill.
SC2000304-OG-00– ENG P.21 20131026-V1
Remember!!! Detach gas cylinder before folding
Operating Instructions
Fold / Unfold Side table
Lighting Instructions
1. Read all instructions before lighting
2. Open lid during lighting
3. Make sure the propane gas cylinder
is tightly threaded into the regulator
(hand tighten only).
4. Push and turn main burner knob
slowly to “HI”.
5. Press the ignitor button. If ignition
does not occur in 5 seconds, turn
the regulator knob off, wait 5 minutes
and repeat the lighting procedure.
SC2000304-OG-00– ENG P.22 20131026-V1
Pull the latch
Pull the latch
Operating Instructions
Manually Lighting Your Grill By Match
1. Important! OPEN LID.
Attempting to light burner with lid closed may cause an explosion. Do not expose any
part of your body or clothing directly above cooking area when lighting.
2. Using the lighting rod with a match, ignite the match and insert through the cooking
grates to the burners.
3. While holding match in place, turn control knob to “Hi” position. Burner will ignite.
4. Observe burner flames through openings at flame tamer. Make sure burner ignites
and stays lit on both sides.
5. If ignition does not occur in 5 seconds, turn the regulator knob off, wait 5 minutes
and repeat the lighting procedure.
Lighting Rod Match
CAUTION 1. If burner does not light OR if burner flame is accidentally extinguished, turn
control knob on regulator to OFF, wait 5 minutes, try again. If the burner does not
ignite with valve open OR if burner flame is accidentally extinguished after lighting,
gas will continue to flow out of the burner and could accidentally ignite with risk of
injury.
2. Handle temperatures with grill on HIGH will be too HOT to touch with bare
hands. Use hot pads or mitts to handle the grill when hot.
SC2000304-OG-00– ENG P.23 20131026-V1
Operating Instructions
Turning grill off
• After cooking, turn the grill off by rotating the control knob to OFF. Control knob should pop
up in the OFF position. If control knob does not pop up, disconnect cylinder to turn grill off
and replace the regulator.
• This appliance will be hot during and after use. Use insulating oven mitts or gloves for
protection from hot surface or splatter from cooking liquids.
• Allow grill to cool completely before storing.
Storing your grill
• Be sure the appliance has cooled. Remove propane cylinder and install protective cap
over outlet threads.
• Disconnect the propane gas cylinder when not in use.
Flame Characteristics
• Check for proper burner flame characteristics. Burner
flames should be blue and stable with no yellow tips,
excessive noise or lifting. The following steps should
be followed for correcting the flame characteristics:
• Turn the control knobs and Liquid Propane cylinder
valve “OFF”
• Allow the grill and burners to cool.
• If the flame is yellow (not enough air), turn the adjustment screw found at the front
of the burner counterclockwise.
• If the flame is noisy or lifts away from the burner (too much air), turn the adjustment
screw found at the front of the burner counterclockwise. If these adjustments do not
correct the problem, contact customer service at (888) 837-1380
Approx.
1/2 inch
SC2000304-OG-00– ENG P.24 20131026-V1
Grill Maintenance
Grill Maintenance • Clean and inspect pressure regulator and hose assembly prior to use.
• Allow grill to cool before cleaning. Frequency of cleaning is determined by how
often grill is used.
• DO NOT use self-cleaning oven to clean any grill part. Extreme heat would remove
any chrome plating and cause premature rusting.
• Meal drippings will solidify in bottom of grill after a few uses. This residue should
be removed regularly. Failure to do so could cause overflow at bottom vent openings
and increase the chance of a grease fire.
• When cleaning grill, cover work area with newspaper. Open grill lid and remove
cooking grate. Loosen residue with scraper or putty knife. Wipe away loosened
residue with paper towels.
• Inside surface of grill may be cleaned with a strong solution of detergent and water
applied with a scrub brush. Cooking grate may be cleaned with a brass wire brush.
Thoroughly rinse grill with water and allow to completely air-dry before using again.
• Place cooking grate and lid onto grill.
• Check and clean burner/venturi tubes for insects and insect nests. A clogged tube
can lead to a fire beneath the appliance.
• Do not obstruct the flow of combustion and ventilation air.
Burner Cleaning
Before cleaning, make sure the gas supply and control knobs are in the “OFF”
position and the burners have cooled.
Orifice spud (A)
To remove the main burners for cleaning: 1. Open lid. Remove the cooking grate and
flame tamer.
2. Remove the screws and ignition electrode
wire, lift the burner out of the firebox to clean
the grill burners.
3. Clean the exterior of the burner with a wire
brush. Use a metal scraper for stubbed stains
or debris.
4. Clear clogged ports with straightened paper clip. Never use a wooden toothpick as
it may break off and clog the port.
5. Check and clean burner / venturi tubes for insects and insect nests. A clogged tube
can lead to a fire beneath and behind the main control panel.
Screw
Burner
SC2000304-OG-00– ENG P.25 20131026-V1
Grill Maintenance
To reinstall the main burners:
1. Insert the burner over the main burner gas valve.
2. Make sure the orifice spud (A) is inside the burner
venturi (B)
3. Align the burner screw hole with the firebox hole,
insert screw and tighten.
Burner Venturi (B) Control Valve
Orifice spud (A)
Should you encounter any problem, need assistance with assembly, have
questions about this product or have missing or defective parts,
Please contact Customer Service at :
Rankam Metal Products Manufactory Limited
1-888-837-1380
Monday thru Friday 8 A.M. to 5 P.M. Pacific Standard Time
or by email
WE CAN HELP.
Made in China
SC2000304-OG-00– ENG P.26 20131026-V1
Warranty Information
1. Manufacturer warrants this Product to be free from defects in workmanship
and materials for a period of 90 days from the date of purchase, PROVIDED
claims are submitted, in writing, with proof of purchase.
2. If any part of this item fails because of a manufacturing defect within the
Limited Warranty Period, Manufacturer offers to replace such part(s) provide
that such parts have not been improperly repaired, altered, or tampered with
or subject to misuse, abuse or exposed to corrosive conditions. This Limited
Warranty is, however, subject to certain limitations, exclusions, time limits and
exceptions (Hereinafter “Conditions”) as listed below. Read these Conditions
carefully.
3. This Limited Warranty shall be limited to the replacement or repair of any
part(s) which Manufacturer determines, after reasonable examination, to have
been defective at the time of manufacturing and manufacturer’s obligation(s)
shall be limited to replacement, if any, of defective part(s) which shall be
shipped at Original Purchaser’s expense to Original Purchaser’s designated
shipping address.
4. This Limited Warranty is given to and covers the ORIGINAL PURCHASER
ONLY and such coverage terminates 90 days from the date of purchase.
5. DAMAGE LIMITATION WARNING: IN NO EVENT SHALL MANUFACTURER
BE LIABLE FOR ANY INCIDENTIAL OR CONSEQUENTIAL DAMAGES,
INCLUDING (BUT NOT LIMITED TO) LOSS OF USE OF THE PRODUCT,
LOSS OF TIME, INCONVENIENCE, EXPENSES FOR TRAVEL,
TRANSPORTATION, LODGING EXPENSES, LOSS OF FOOD, LOSS BY
DAMAGE TO PERSONAL PROPERTY OR LOSS OF INCOME, PROFITS
OR REVENUE.
6. MANUFACTURER’S OBLIGATION: Manufacturer’s liability shall be limited
to the delivery of a good, merchantable Product and, if necessary, the repair
or replacement, at manufacturer’s option, of any defective part or unit.
7. TRANSFER LIMITATIONS: This Limited Warranty is not assignable or
transferable. It covers only the original purchaser.
8. RESERVED RIGHT TO CHANGE: Manufacturer reserves the right to make
changes or improvements to products it produces in the future without
imposing on itself any obligations to install the same improvements in the
products it has previously manufactured.
9. This Limited Warranty gives the Original Purchaser specific legal rights but
there may be other rights which vary by jurisdiction.
10. This warranty does not cover the following items: - Chips or scratches on porcelain or painted surfaces
- Rust or corrosion is not deemed a manufacturing or materials defect
- Discoloration or loss of paint due to handling during assembly, heat or
cleaning products. Paint may require touch up.
- Stainless steel discoloration or corrosion
- Consumables such as batteries
SC2000304-OG-00– ENG P.27 20131026-V1
IF CUSTOMER SERVICE IS NECESSARY:
The Original Purchaser is responsible for shipping and handling charges of the returned item(s) and replacement parts, if any.
All parts to be replaced will need to be shipped before replacement items will be sent.
Follow the Customer Service Representative’s instructions exactly. If a return is necessary, it must be packed carefully and shipped prepaid.
Should you encounter any problem
or
Obtaining replacement parts
CALL US FIRST.
Do not return product to the store.
WE CAN HELP.
Rankam Metal Products Manufactory Ltd.
1618 W. Rosecrans Ave.,
Gardena, CA90249
USA
Please contact Rankam Customer Service at [email protected]
or at 1-888-837-1380, Mon to Fri, 8:00 a.m. – 5:00 p.m. Pacific Standard Time.
Warranty Information
SC2000304-OG-00– ENG P.28 20131026-V1