biomedical graduation projects - misr university for ... engineering department misr universityity...

Biomedical Engineering Department Misr UniversityBiomedical Engineering Department Misr UniversityBiomedical Engineering Department Misr UniversityBiomedical Engineering Department Misr University for Science& Technology for Science& Technology for Science& Technology for Science& Technology

Faculty of Engineering, Biomedical Engineering Department, Al-Motamayez District, 6th of October City, Egypt. P.O.Box:77

Tel. +202-38354686 Fax.: +202-38354692

1

Biomedical Graduation Projects

Some of the B.Sc. Projects which have been designed, developed, and

Implemented at the department:

Project Title: Portable Dental Unit

Objective:In this project portable dental unit is

completely implemented the design, operation

and maintenance of the proposed unit are

studied carefully, testing of the proposed unit

achieves satisfactory performance.

Supervised by:

Prof.Dr.Youssry M.Youssef, Dr.Hassan foad &-Dr.ahmed El-

Garhy

Project Title: Oxygen Concentrator

Objective:The project is a new technology of oxygen

separation from air by using adsorption process which is

called pressure swing adsorption. The result of this

separation gives 95% pure oxygen, while its percentage in

the air is 21.9%. A chemical substance is used in the

separation of oxygen.

Supervised by:

-Prof.Dr.Youssry M.Youssef, Dr.Hassan foad &-Dr.ahmed El-Garhy



Tel. +202-38354686 Fax.: +202-38354692

2

Project Title: PC Based Spectrophotometer

Objective: A spectrophotometer is a device

that measures light intensity as a function

of wavelength. It does this by diffracting the

light beam into a spectrum of wavelength,

detecting the intensities with a charge coupled

device, and displaying the results as a graph.

Supervised by:

-Prof.Dr.Youssry M.Youssef &-Dr.Sherif Sayed

Project Title: Smart wheelchair based on RF techniques

Objective: The project design to offer theuser

new facilities with reasonable cost, we added an

electrical unit based on radio frequency (RF)

techniques, it use a remote control unit that

carries out the function of joystick concerning

pushing forward and rounding the chair, the

electronic units offers other function such as,

switching on or off (the air conditioner, TV, locking and unlocking the doors).

Supervised by:

-Prof.Dr.Youssry M.Youssef & Prof.Dr.Ahmed Mohamed El-Garhy



Tel. +202-38354686 Fax.: +202-38354692

3

Project Title: ElectroCardioGraph (ECG)

Objective: The electrocardiogram (ECG) is a

recording on the body surface of the electrical

generated by the heart. It was originally observed by

Waller in 1889 using his pet bulldog as the signal

source and the capillary electrometer as the

recording device.

Supervised by:

-Prof.Dr.Youssry M.Youssef

Project Title: Automatic Blood Pressure

Objective: This project is used to estimate the systolic

and diastolic blood pressure by korotkoff`s technique

because it proved to be more reliable than the

previous palpitation techniques.

Supervised by:

-Prof.Dr.Youssry M.Youssef & Dr.Ahmed El-Garhy



Tel. +202-38354686 Fax.: +202-38354692

4

Project Title: Electrosurgical Unit

Objective: the ESU developed by Gushing and Bovie was a spark-gap unit that consisted

of two small metal conducting pieces separated by an air gap.

Supervised by:


Project Title: Water Treatment Unit

(Distillation Technology)

Objective: The (EPA) proposed an amendment

to safe drinking water act requiring that all

community water systems provide their

customers with an annual water quality report.

Supervised by:


Project Title: Diagnostic Ultrasonic Imaging System (A-Mode).

Objective: it is well-known matter that ultrasound became an efficient and popular

diagnostic tool in the fields of medicine and biology. This is essentially due to its safety

for both patients and medical staff.

Supervised by:



Tel. +202-38354686 Fax.: +202-38354692

5

-Prof.Dr.Youssry M.Youssef, -Dr.Ahmed El-Garhy

& Prof.Dr.Sayed El-Sherbiny

Project Title: Automatic Diagnosis Of Diseases Using Neural Network

(Software project).

Objective: this work concentrates on extracting characteristic features from ECG`s. The

feature are used to classify among three cardiac cases: NSR,PVC and APC.

Supervised by: -

Dr.Ahmed El-Garhy & -Prof.Dr.Youssry M.Youssef

Project Title: Design of Cad/Cam System for laser sintering for Tissue

Engineering

Objective: The aim of work is to design a 3-D motion stage to be used in scaffold

fabrication for tissue engineering using LASER –sintering.

Supervised by:

-Prof.Dr.Youssry M.Youssef &-Dr.Nahed Salouma



Tel. +202-38354686 Fax.: +202-38354692

6

Project Title: Centrifuge

Objective: A Centrifuge machine that exerts a force many thousand times that of gravity,

by spinning. Commonly used to clarify liquids by settling the heavier solid in a few

minutes.

Supervised by:

-Prof.DR.Yousry M.Youssef& DR.Sherif Sayed.

Project Title: Dental X-Ray

Objective: The aim of this project is penetration

across material and absorption in

material,photographic effect,ionizing effect.

Supervised by:

-Prof.DR.Yousry M.Youssef.

Project Title: Advanced ICU Monitor

Objective: In Software part we use mat lab programmer to control and operate the

hardware part and display the result on monitor, In Hardware part which consist of

Analog stage, Digital stage and buffering and interface stage.



Tel. +202-38354686 Fax.: +202-38354692

7

Supervised by:


Project Title: Pneumatic Lithotripsy Unit

Objective: To determine the efficacy of Swiss lithoclast in

the management of kidney stones and complications

encountered in lithotripsy.

Supervised by:


Project Title: Therapeutic Ultrasound

Objective: Ultrasound is not a new technology. It used by physiotherapists to help treat

and diagnose injury, as well as to scan internal function of the

body.

Supervised by:

-Prof.DR.Yousry M.Youssef &DR.Ahmed El-Garhy



Tel. +202-38354686 Fax.: +202-38354692

8

Project Title: Wireless Data Transmission Patient Monitor

Objective: Patient monitoring products measure, display and document physiological

information obtained at regular intervals over time from sensors attached to the

patient or other input devices.Measured parameters include electrocardiogram (ECG),

and blood pressure, pulse rate, pulse oximetry, body temperature, and other specialized

parameters.

Supervised by:

-Prof.DR.Yousry M.Youssef&-DR.Ahmed El-Garhy.

Project Title: Electromyograph(EMG)

Objective: Electromyography (EMG) is a technique for evaluating and recording

physiologic properties of muscles at rest and while contracting. EMG is performed using

an instrument called an electromyography, to produce a record called an electromyogram.

An electromyograph detects the electrical potential

generated by muscle cells when these cells contract, and

also when the cells are at rest.

Supervised by:

-DR.Ahmed El-Garhy



Tel. +202-38354686 Fax.: +202-38354692

9

Project Title: Mobile Infant Incubator

Objective: An infant incubator is used mainly to keep a baby’s core temperature

Stable at 37 degrees Celsius. Most incubators also humidify the air

and can add extra oxygen.

Supervised by:


Project Title: ECG Diagnosis System

Objective: The purpose of this project is to design a small system in size that can record

the ECG and automatically measure the amplitude of the ECG waves (P,Q,R,S,T) ,the

time duration of these waves and the time interval of the segments between them

offering a quick and trusty mean of self assessment at home ,clinics or hospitals for a

cardiac patients.

Supervised by:

-DR.Ahmed El-Garhy &-DR.Abdelaziz Amichi



Tel. +202-38354686 Fax.: +202-38354692

10

Project Title: Portable Hemodialysis Machine

Objective:Hemodialysis is a method for removing waste products such as potassium and

urea,as well as free water from the blood when the kidneys are in renal

failure..Hemodialysis is one of three renal replacement therapies

Supervised by:

-Prof.DR.Yousry M.Youssef.

biomedical graduation projects - misr university for ... engineering department misr universityity...

Documents