berco undercarriage technical

16
The n. 1 in Undercarriage 5,000,000 Track Shoes 1,100,000 Rollers 100,000 Track Chains 320,000 Idlers and Sprockets 220,000 Tons of product 12,000 Containers of product A Company of ThyssenKrupp Group BERCO S.p.A. Berco Product Line The Widest Choice BMP MINING PRODUCTS BSD SPECIAL DEVICES BMR MEDIUM RANGE BTS TRACK SYSTEMS MINI UNDERCARRIAGE & UTILITIES BMU

Upload: theiguana1

Post on 21-Nov-2015

1.077 views

Category:

Documents


40 download

DESCRIPTION

Catalogo de las lineas BERCO

TRANSCRIPT

  • The n. 1 inUndercarriage5,000,000 Track Shoes 1,100,000 Rollers 100,000 Track Chains 320,000 Idlers and Sprockets220,000 Tons of product 12,000 Containers of product

    A Company ofThyssenKrupp Group

    BERCO S.p.A.

    Berco Product LineThe Widest Choice

    BMPMININGPRODUCTS

    BSDSPECIAL DEVICES

    BMRMEDIUM RANGE

    BTSTRACKSYSTEMS

    MINI UNDERCARRIAGE& UTILITIES

    BMU

  • CONTENTS

    MOVING YOUR BUSINESS AHEAD

    YOUR BEST UNDERCARRIAGE VALUESince 1920 Berco has offered an innovative, reliableand economical solution to any undercarriage need.Whether for the original equipment manufacturers(OEM) or the aftermarket, for a special machine or amini-excavator, for a bulldozer or a miningexcavator, Berco can offer you the right answer to yourspecific requirement. Superior engineering, innovative technology,comprehensive know how and state-of-the-artmanufacturing guarantee the total quality of theproducts and services offered to you.Original Equipment Quality, Aftermarket Value

    THE COMPETENT PARTNER YOU CAN RELY ONCustom made solutions and project engineeringsupport is available upon request.Our team of engineers can help you choose or designthe most effective and efficient solution to your specificundercarriage need. They can help you reduce development andengineering time, tooling expenses and facility costs,while adding value to your business.Berco, The choice of the leading OEMsi

    MOVING YOUR BUSINESS AHEAD

    page 2

    THE WIDEST CHOICEpage 3

    MAKINGA SUPERIOR PRODUCT

    page 4

    STATE OF THE ART PRODUCTION

    page 5

    BMPBerco Mining Products

    page 6

    BMRBerco Medium Range

    page 8

    BMUBerco Mini Undercarriage

    page 10

    BTSBerco Track Systems

    page 12

    BSDBerco Special Devices

    page 14

    All products shown in this document originate from Berco exclusively.Any references to Caterpillar (the Caterpillar word signs) are mentioned to communicate thatthe aforemenioned products are only suitable for Caterpillar machines with the correspondingmodel designation.

  • 3

    THE WIDEST CHOICEOF UNDERCARRIAGE COMPONENTS AND SYSTEMS FOR TRACK TYPE MACHINES

    TRACK SHOES More than 66 different profiles Hot rolled, cast and hot forged shoes More than 5,000 configurations Variable width, mud holes, clipped corners, chamfered holes

    IDLERS Cast, forged and fabricated types More than 500 configurations Low temperature (-50C) version available

    ROLLERS Single flange, double flange and inner flange rollers More than 1,000 configurations Low temperature (-50C) version available

    TRACK CHAINS Dry, sealed & greased, sealed & lubricated chains Heavy Duty version More than 11,000 configurations Suitable for XR, XL, LGP and TSK undercarriages

    SPROCKETS & SEGMENTS Weld-on rim, bolt-on rim, full hub and segmented type 3,4,5 and 6 teeth segments More than 130 segment configurations More than 1,100 sprocket configurations

    SPECIAL APPLICATIONS Undercarriage for special applications: large conveyor, pipelinehandling, pavers, milling machines, logging equipment, directionaldrills, mining equipment, etc.

  • ISO9001

    4

    ADDING VALUE TO YOUR BUSINESSState-of-the-art 3D modeling, Finite Element Analysis(FEM) and Rapid Prototyping enables to design,optimize and evaluate a component before it is built.

    Artificial Intelligence techniques are currently beingdeveloped to automatically inspect 100% ofcomponents. Reliability Test on components arecarried out to determine life and performance in avariety of field applications.

    Berco Metallurgy Laboratory employs advancedmachines such as an electron microscope withmicroanalysis, a spectrophotometer, tribometers forwear tests, MTS presses for static and fatigue tests(also at extreme temperatures -70C 250C) onmaterials and components.

    Huge efforts are also devoted to the development ofNew Materials and improvement of the Heat TreatingProcesses, to guarantee longer product life andsuperior products.

    Photo-elasticity and Strain Gauge techniques arecommonly used for stress and fatigue analysis onindividual and assembled components.

    Berco adds value not only to the products but also toYour Business.

    MAKING A SUPERIOR PRODUCT

  • ISO14001

    AUTOMATED PROCESSES AUTOMATIC QUALITYThe entire production process is fully automated andcomputer controlled via Computer ManufacturingTechnology systems. This guarantees a highly reliableprocess and constant quality of the products.

    THE RIGHT PRODUCT AT THE RIGHT TIMEA vast variety of raw materials and flexible manufacturinggive the competitive advantage of short lead times whilematching your specific need. Thats what we also callCustomer Satisfaction.

    HEAT TREATED TO TREAT YOU EVEN BETTERQuality materials and state-of-the-art manufacturing arenot enough to guarantee the quality of the finished products.Thats why the heat treating processes are carried outmaking sure that all process parameters (temperaturegradients, time, quenching temperature, etc.) are constantlymonitored online. Hardening and tempering upgrade mechanical properties forsuperior wear resistance, stress relieving guarantees perfectgeometry and excellent resistance for longer product life.

    STATE OF THE ART PRODUCTION

    5

  • RH 120C Greased unsealed track chain Chain pitch 350 mm (13.78) Double grouser forged shoe,width 800 mm (311/2)

    Track roller assembly,single flange, with oil fillplug on collars andlocking pins, reinforcedshaft dimensions

    6

    BMPMINING PRODUCTSBerco Mining Products offers an efficient, reliableand economical range of solutions for miningoperations, catering for the undercarriage needs ofopen pit mining, quarrying or earthmoving inlarge-scale land reclamation.Superior engineering and technology,comprehensive know-how and state-of-the-artmanufacturing ensure the total quality of theproducts and services offered.Our team of engineers is available to help youchoose or design the most effective and efficientsolution to your specific undercarriage needs.

    THE WIDEST CHOICEA complete line of undercarriage componentsfor track-type machine classes ranging from 50to 400 ton and 215.9-350 mm (81/2-13.78)chain pitchDry, greased, sealed & lubricated chain versions.Arctic (-50C) version and track chains with life-time seal groups uponrequestForged shoes forheavy dutyapplicationsTrack chains forspecialapplications: largeconveyor systems,pipeline handling, etc.

    FORGED SHOESForged shoes for extremeapplications, wheregreatest mechanical andwear resistance propertiesare needed

    CLASS D10N/RPitch 260 mm - 101/4

    CLASS D9N/R - D275Pitch: 240 mm - 9.44

    CLASS D8K - D155Pitch: 228.6 mm - 9

    CLASS D375Pitch 280 mm - 11

    THE WIDEST CHOICE OFUNDERCARRIAGE FOR EXCAVATORS Components for: CAT345, 350, 365, 375, E650, 5080;Demag H65, H85, H95, H121; Case CX800; HitachiEX550, EX600, EX700, EX750, EX800, EX1000,EX1100, EX1800, EX2500; Komatsu PC650, PC710,PC750, PC800, PC1100, PC1800, PC3000, PC4000;Liebherr R954, R964, R974, R984, R994; Link BeltLS7400; Terex O&K RH30, RH40, RH60, RH90,RH120C; Poclain 300, 400, 600, 1000; SumitomoSH800 and other machines

    Chain pitch from 215.9 to 350 mm (81/2-13.78)

  • 7TRACK CHAINS WITH BPR For D9L, D9N, D9R, D10N, D10R, D11N, D11R,D275, D375, D455 and D475 machines

    Lubricated track chains with snap rings in all joints (BPR)

    BPR - Berco Pin Retention - improves operating lifeof components. The snap rings on the pin endsprovide a perfect sealability of the track chains. Sideloads can be partially supported by this device

    D10 and D11 lubricated track chains with new seal Oversized pin: a new design for D11 track chain alsoavailable

    THE WIDEST CHOICE OFUNDERCARRIAGE FOR DOZERS Components for: CAT D8, D9, D10, D11classes; Dresser TD25, TD40; FiatallisFD30, FD40, FD50; Deere 1050C;Komatsu D135, D155, D275, D355,D375, D455, D475; LiebherrPR751, PR752 and other machines

    Chain pitch from 215.9 to 317.5 mm (81/2-121/2)

    Track links are forged, quenched andtempered, rail surface inductionhardened to increase the wear resistance(HRC>45)

    Extreme service single grouser shoes available

    CLASS D11N/R - D475Pitch 317,5 mm - 121/2

    300 TON CLASS EXCAVATORPitch 350 mm - 13.78

    LIEBHERR R984C (BMP 280) Track group, greased, sealed, chain pitch 280 mm (11)

    Double grouser shoes, open center, clippedcorner, shoe width 750 mm (291/2)

    Track roller assembly, single flange Bolt-on 12 teeth sprocket rim,diameter 1131 mm (441/2)

  • 8SPROCKETS AND SEGMENTS Sprockets for 7-50 ton class excavators andsegments for D3-D8 class dozers

    Nine chain pitch versions from 140 to228.6 mm (5.51-9)

    Single shot induction hardened onentire tooth profile or with differentialquenching for excellent resistance towear and fatigue

    Through hardened segments for highsurface hardness (HRC>50) and toughcore (HRC 45)

    BMRMEDIUM RANGEThe Berco Medium Range offers an innovative,reliable and economical set of solutions to yourundercarriage needs, catering for OriginalEquipment Manufacturers (OEMs), theAftermarket, bulldozers, excavators, old machinesor special designs and providing you with the rightanswer to your specific requirements.

    THE WIDEST CHOICEA complete line of undercarriage componentsfor track-type machine classes ranging from 7 to50 ton and 140-228,6 mm (5.51"-9) chainpitchDry, greased, sealed or lubricated chainversions, heavy duty chains, more than 11,000configurationsAny configuration available with single, double,triple grousersCast, forged or fabricated idler types, more than500 configurationsSingle flange, double flange or inner flangerollers, more than 1,500 configurationsMore than 600 configurations of sprockets andsegments Low and high temperature versions for extremeapplicationsUndercarriage for special applications:conveyor, pipeline handling, milling machines,forest machines, etc

    IDLERS Fabricated idlers with hot rolled rim for 7-50 tonclass excavators and for D3-D8 class dozers

    Induction hardenedrail surface forexcellent resistanceto wear and fatigue Heavier componentsfor improved stability Forged idlers forheavy dutyapplications

    TRACK SHOES Cast steel shoes for specialapplications: swamp type (1), flattype (2), bent ends shoes,polyurethane track shoes (3) andmore

    Through hardened and stress relievedto guarantee excellent wear, highstrength and resistance to bending andbreakage, resulting in longer life

    CLASS D6MPitch: 190 mm - 71/2

    CLASS D5MPitch: 171.5 mm - 63/4

    CLASS D3 - D4 B/CPitch: 155.5 mm - 61/8

    Undercarriage for sugarcane harvester

    3

    1

    2

  • 9GREASED TRACK CHAINS FOR EXCAVATORS AND HEAVY DUTYAPPLICATIONSA completely new sealing system, consisting of a W shape polyurethane seal, especially designed tokeep grease in joints and abrasive particles out of them Internal pin & bushing wear reduction, withconsequent life extension for 20% and more ifcompared with the standard sealed chains on thesame application

    Reduction of sneaky tracks phenomenon, as resultof more laterally stable chains, thus reducing wear ofrelated parts, such as links, rollers, guides

    Improved rebuildability of the track chain Noise and maintenance costs reduction and lessmachine fuel consumption: improved travellingperformances

    CLASS D8N/R/TPitch: 215.9 mm - 81/2

    CLASS D7N/RPitch: 215.9 mm - 81/2

    CLASS D6R/TPitch: 203.2 mm - 8

    BERCO HEAVY DUTY TRACK CHAINSFOR D4-D7 CLASS MACHINESHeavy duty, sealed & lubricated track chains have beenspecifically designed for increased pin & bushingretention. Track link incorporates greater pin-to-linkand bushing-to-link contact areas while additionallink wear material increases component life.

    ROBUSTUSTM, THE NEW ROTATING

    BUSHING TRACK SYSTEM

    In the new system ROBUSTUSTM the bushing rotateswhen in contact with the sprocket, reducing the bushingand sprocket friction and wear and thus enabling longerlife.As a consequence, it is not necessary to turn bushingsand pins and replace sprocket segments during thewhole life of the undercarriage.

    Wider track link rail, provides an extendedrunning surface area

    Wear perfectly balanced through all components Berco Pin Retention Reinforced hardware to improve joint stabilityNew concept of seal design

    The new system is fully compatible with existing framesand standard components: (D6H and D5H machines ),older machines can be easily upgraded to increase theirproductivity and the life of the undercarriage.In the same way ROBUSTUSTM is forward-compatiblewith the new generation undercarriages equipped withparallel or twin links.Berco field tests proved that the new systemincreases the track life of 35 percent, with amaximum of 6,000 hours of operation withoutmaintenance; and this means cutting operatingcosts up to 25 percent.

  • 10CLASS T300

    Pitch: 101.6 mm - 4

    F25C - HEAVY DUTY TRACK CHAINSPECIALLY DESIGNED FOR PAVINGMACHINESSealed and greased track chain pitch 125 mm (4.92),with w-shaped polyurethane seals, reinforced track linkwith strut for extremely heavy-duty applications andheavy vehicles, four different shoes:

    Flat, hot forged, 300 mm (11.81) Rubberized (polyurethane) shoe, 300 mm Triple grouser shoe, 300 mm, open center upon request Single grouser shoe, 300 mm, open center upon request

    BMUMINI UNDERCARRIAGE & UTILITIESThe Berco Mini Undercarriage program offers aninnovative, reliable and economical set of miniundercarriage solutions, catering for miniexcavators, horizontal drilling machines, smalldozers or paving machines and providing you withthe right answer to your specific requirements. Bercocan supply a complete range of interchangeablecomponents for rubber track belts or traditional steeltrack chains, guaranteeing the best possible valuefor money. Superior engineering, innovativetechnology (e.g. patented monoblock cast ironchains), comprehensive know-how and state-of-the-art manufacturing ensure the total quality of theproducts and services offered.

    THE WIDEST CHOICEA complete line of undercarriage components formini excavators class machines ranging from 1 to6 ton, Compact Track Loader (CTL) and otherCompact Utilities Track chains with 90-140 mm pitch (3.54-5.51")Traditional steel chains with welded or bolt-onshoes Interchangeability from steel to rubber andviceversaClamp-on rubber pads or rubberized shoesavailable

    Single grouser shoe Flat type shoe

    Triple grouser shoe

    CLASS T150Pitch: 90 mm - 3.54

  • 11CLASS T500

    Pitch: 135 mm - 5.31CLASS FL4

    Pitch: 140 mm - 5.51CLASS F25C HD

    Pitch: 125 mm - 4.92

    Undercarriage for CTL

    4 rollers, rubber version

    Undercarriage for CTL

    5 rollers, steel version

    NEW STEELUNDERCARRIAGECOMPONENTSRecent evolutions in the market of MiniExcavators have led Berco to developnew undercarriage components for thisrange of machines. In particular, for 3 and 5-ton classmachine components, it was possible toengineer new parts suitable to guaranteemore resistance to wear and betterperformances.The first big advantage of chains, rollers,idlers consists in the raw material choice:instead of using austempered cast iron(ADI) it has been used a special steelalloy.As a consequence, the manufacturingprocess can benefit of both forgingtechnique and faster and more efficientmachining operations. Moreover, it is also possible to applyinduction hardening to undercarriageparts more subject to wear thusincreasing wear life and performances

    during operation.

    Berco has developed a newsolution based on a trackedundercarriage, available in bothrubber tracks and traditionalsteel track chain. The range,which already featured twoversions rubber tracks andtraditional steel track chain. In cooperation with his partnersBerco can offer:- Track Frames- Front Idlers- Rear Idlers- Track Rollers- Sprocket & Final Drive- Rubber Tracks

    RUBBER TRACKSThe rubber track belts,strengthened with steel cables,have metal inserts, giving amaximum cruising speed of

    about 14 km/h. The rubber tracksolution provide good grip in a greatvariety of working conditions and ensuregreat mobility even in difficult situationslike muddy soils, great slopes, etc. Allthis make the rubber tracked skid steera much more versatile and productivemachine compared to the traditionalwheeled version.

    STEEL TRACK CHAINSThe steel track chains, compared to therubber tracks, provide a much higherwear resistance, higher grip (traction)and longer durability (up to 4 timeshigher). It is the recommended solutionfor heavy-duty operations, harshenvironment (steel scrap yards,demolishing sites, etc.) and anytime it isnot necessary to change often the work-site.

    UNDERCARRIAGE COMPONENTS FOR FOR COMPACT TRACK LOADERS

  • 12

    BTSCOMPLETE TRACK SYSTEMSThe Berco Complete Track Systems division is the idealsolution for all OEMs that now, more than ever, areexpressing the need for complete 'turnkey' undercarriagesystems.Berco is able to supply compete track systems(undercarriage components, hydraulics, frames andgearboxes), finished and ready for installation onmachines directly on manufacturers' own assembly lines.

    Berco has a vast range of products and, when requestedfor special applications, develops sets of componentsspecifically tailored to customers' needs. All this makes Berco a supplier with a level of reliabilityand skill that clearly distinguishes them from othersystems integrators, who merely find generalcomponents on the market and 'put them together'.Berco Complete Track Systems is able to supply safe,reliable systems, soundly based on the hallmarkcharacteristics of the Berco brand: extensive know-how,flexible design responding rapidly and effectively tocustomers' needs and, finally, the ability to support thecustomer at every stage, from design right through toinstallation.Berco's great competence and flexibility in engineeringand production allow them to develop, design and supplyundercarriage systems for a wide range of applications,such as pavers, rock boring machines, rice and sugar-cane combine harvesters, mini-excavators, etc.

    The Berco Complete Track Systems engineering staff usethe same calculation methods in the development of newmachines in co-engineering projects with OEMs as in thedesign and verification of the welded structures in theirown production systems. These methods include FEManalysis on frames, dynamic and vibrational analysis,CAD-3D design and construction drawings forproduction. All this guarantees high quality standardsand the ability to satisfy even the most exacting andcomplex needs of the customer.

    These solid engineering skills are combined with aremarkable production capability, now spread over fivefactories and characterised by leading edge technologyand highly automated production lines.This production capability guarantees the qualitydemanded by the customer, on schedule.

    Finally, a continuously expanding network of branches,strategically located all over the world, is able to supplyon a just-in-time basis and guarantee a speedy andefficient after-sales service.

    GENERIC UNDERCARRIAGE FRAMES

    MOBILE CRUSHING PLANT FRAMES

    Standard layout dimensions are presented Custom-tailored design on request Sideframe or carbody supply Wide choice of gear-boxes and hydraulic motors isavailable

    Optional swing bearing plate and swivel joints areavailable

    Standard layout dimensions are shown Custom-tailored design on request Wide choice of gear-boxes and hydraulic motors isavailable

  • 13

    RICE COMBINE HARVESTER DRILLING RIG FRAMES

    ROAD MILLING MACHINES MINI EXCAVATORS

    ASPHALT PAVERS

    Mini excavators, utility-use or special applicationmachines

    Standard layout dimensions are presented Metal track chains with 2-grousers, 3-grousers,rubber pads or rubber belt options

    Custom-tailored design on request Sideframe only or the whole carbody supply. Wide choice of gear-boxes andhydraulic motors is available

    Optional swing bearingplate and swiveljoints areavailable

  • CEM7000 Electromechanical Wrench

    OPERATING SPECS

    Max. torque on socket shaft 7,000 Nm5,160 lbfft

    Max. final tightening angle 360

    Socket shaft rotation speeds 8.5-145 rpm(2-speed), in either direction

    Socket shaft motor power 6 HP4.5 kW

    Max. admitted width 1,200 mm track chain + shoes 471/4

    Max. admitted height 370 mm track chain + shoes 141/2

    14

    BSDSPECIAL DEVICESThe Berco Special Devices offers a completesolution to your undercarriage maintenanceneeds, with a range of specific operationsincluding pin & bushing turning, roller lubrication,track shoe fastening or on-site machine servicing.Superior engineering and technology,comprehensive know-how and state-of-the-artmanufacturing ensure the total quality of theequipment offered. Berco offers turnkey solutions, custom-madedesign and supply of complete workshop andrepair facilities, training and technicalsupport.

    THE WIDEST CHOICE PT350 stationary hydraulic press forthe assembly/disassembly ofmedium and large-size track chains (e.g.Komatsu D575, O&K RH120C, LiebherrR994B and Caterpillar D11 track chains)PT250 stationary hydraulic press formedium and small-size chainsPP50 and PP100 portable presses powerfuland versatile tools for assembly and disassemblyof track chains, sprockets, rollers, shafts,transmission components, etcComplete line of tools for servicing variousundercarriage sizes, available upon requestDCL and DCL-D track control and lubricatingdevices for checking the vacuum in oil seals andinjecting oil into lubricated chains, rollers andidlers (DCL-D model)CEM7000 electromechanical track shoe wrenchfor screwing and unscrewing the shoe bolts ontracked vehicle chains, both large and small. Theelectronic torque-turn control ensures highlyreliable and consistent bolt torquing results. Thehigh torque developed facilitates bolt removaleven in the most difficult situations (e.g. rust) The ACC and ACC/S-SP track winder aredesigned for winding medium and small-sizechains, whereas theACC/S-SP isspecifically designedfor the larger sizes

    DCL/DCL-D Lubrication Device

    OPERATING SPECS

    Max. vacuum759 mm/Hg29,88Hg

    Vacuum pump capacity at atm.pressure

    66 dm3/min2,3 ft3/min

    Oil pump max. delivery3 dm3/min183 in3/min

    Pressure setting3 bar43 lbf/in2

    Oil tank capacity75 dm3

    2,6 ft3

  • 15

    PT250-PT350 Hydraulic Track Presses

    OPERATING SPECS PT250 PT350

    Max ram force 1,803 kN (184 tf) 3,185 kN(325 tf)203 sh ton 358 sh ton

    Max operating pressure 31.5 Mpa (315 bar) 35 Mpa (350 bar)4,570 lbf\in2 4,980 lbf\in2

    Ram rod diameter 230 mm 270 mm9.05 10 5/8

    Max ram stroke 160 mm 190 mm6.30 71/2

    PP100-PP50 Portable Hydraulic Track Presses

    OPERATING SPECS PP100 B/S PP50 B/S

    Max. ram force 911.4 kN (93 tf) 490 kN (50 tf)102.4 sh ton 54.7 sh ton

    Max. traction of rams 715.4 kN (73 tf) 323.4 kN (33 tf)80.6 sh ton 36.3 sh ton

    Max. operating pressure 70 Mpa (700 bar) 70 Mpa (700 bar)10,000 lbf/in2 10,000 lbf/in2

    Max. ram stroke 350 mm 280 mm13 3/4 11

    Oil capacity 4.64 dm3 2 dm3

    283 in3 122 in3

    ACC - ACC/S-SP Track Winders

    OPERATING SPECS ACC ACC/S-SP

    Rotation speed 3 giri/min 1,7 rpmin both directions

    4 HP 4 HP

    3 kW 3 kW

    Max. mass admitted 3.600 kg 8.200 kgonto spindle 7.936 lb 18.040 lb

    Max track shoe width admitted 762 (1.000) mm 1.460 mm(with optional device) 30 (40) 571/2

    Motor rating

  • BERCO S.p.A.Via 1 Maggio, 23744034 Copparo (FE) ItalyTel. +39 0532 864 111Fax +39 0532 864 [email protected]

    ISO 9001 Cert. n. 0029/4

    ISO 14001 Cert. n. 0009A/2

    Your Berco Dealer:

    01102.WR432GB00C

    Published by Berco Communications Dept.

    All manufacturerss nam

    es, num

    bers, sym

    bols and descriptions are used for reference purposes only. All parts listed are of

    Berco original production.The specifications and processes described in this brochure are subject to change without notice