bauer valves - ar-hydra.comar-hydra.com/d/3000/d/bav-icfluiconnecto.pdf · 9 seal nbr...
TRANSCRIPT
Model code:1 2 3 4 5 6 7 8 9 10BAV
Section Description Code Legend1 Type BAV Solenoid valve2 ISO 4401
IC-3 Size 6IC-5 Size 10
3 Connector omit DIN connector IP65
4 Spool type See list below5 Voltage D12 DC12V
D24 DC24VA110 AC110VA220 AC220VB110 Rectified 110VB220 Rectified 220V
6 Din connector Z5L With light7 Emergency
push rodomit WithoutN9 With
8 Switching time control
omit Without
0.8 Choke 0.81.0 Choke 1.01.2 Choke 1.2
9 Seal NBR Nitrile-butadienerubber
10 Series number 58 Bauer
BAUER VALVES
1
SpoolSpoolSpoolSpool symbolsymbolsymbolsymbol
Name of solenoid
A: When solenoid a acts, oil flow P →A, B→T.B: When solenoid b acts, oil flow P →B, A→T.The function types 3C5&3C6 are in the opposite direction against the above-mentioned oil flowRegular.
2
Technical specificationBAV IC3 IC5
Working pressure(31.5Mpa)
Port P. A. B 31.5Port T 10
Maximum flow rate(L/min) 80 120Working fluid Mineral oil, phosphate-easter
Fluid temp -20~70℃Viscosity(mm²/s) 2.8~380
Weight (kg) One solenoid 1.45(DC) 1.4(AC) 5.1(DC) 4.5(AC)Two solenoids 1.95(DC) 1.9(AC) 6.7(DC) 5.1(AC)
Working voltage Direct current 12V 24VAlternating current 110V/50Hz, 220V/50Hz, 110B, 220B
Cycle time(ms) open 50~60(DC) 15~25(AC)close 50~70(DC) 40~60(AC)
Switch frequency(t/h) 15000(DC) 7200(AC)Insulation grade IP65
3
24V
Size 6 direction plug-in DC type
4
Size 10 direction plug-in DC type