barton cat

Download Barton Cat

Post on 22-Oct-2015

80 views

Category:

Documents

4 download

Embed Size (px)

DESCRIPTION

Electrical wiring containment systems.

TRANSCRIPT

  • Metallic Cable Protection EquipmentConduit & Fittings Trunking

    Adaptable Switch & Socket Boxes

    A Division of Caparo Precision Tubes Limited

    EngineeringBAR ON

  • THE COMPANYSince 1983 Barton has been a subsidiary of Caparo Industries plc, a broadbased group with interests in engineering and steel.

    Barton Engineering is a division of Caparo Precision Tubes Ltd. Operationshave been transferred to the Hub Le Bas site in the West Midlands.

    THE QUALITYProducts listed in this brochure are either manufactured by BartonEngineering under a certified ISO 9000 system, or are manufactured byour suppliers under a certified ISO system or have their quality assuredto the same level by rigorous inspection at Barton Engineering.

    ISO 9000 systems involve a complete set of working practices, disciplinesand procedures - implemented at each stage of the manufacturingprogramme, from raw material inspection through to final despatch.

    As a result, all Barton products satisfy a uniform standard of quality andsafety.

    THE SERVICEBarton provide a highly efficient customer service operation. Fully trained,specialist sales personnel working with computerised equipment provideaccuracy, precision and speed at all times.

    A Division of Caparo Precision Tubes Limited

    EngineeringBAR ON

    Introducing you to Barton

    Caparo Group Ltd is a private U.K. holding companyset up in 1978 specialising principally in themanufacture and supply of steel based consumableproducts to industry.

    During the 1980s a large number of industrialsubsidiaries were acquired or developed organically,both in the U.K. and in the U.S.A., under thesub-grouping of Caparo Industries Plc, which waslisted on the London Stock Exchange until it becamea wholly owned subsidiary of Caparo Group Ltd in1991. In addition to the industrial companies listedbelow, the group owns commercial properties inLondons West End, the luxury Osborne Hotelin Torquay and minority investments in quotedcompanies in the U.K. and North America.

    Hub Le Bas share the same site as BARTON ENGINEERING at Bilston, Wolverhampton in the West Midlands.

    As the leading distributor of steel tubing in the UnitedKingdom, Hub Le Bas have four strategically placed branchesin Manchester, Bilston, Leicester & London.

    A comprehensive range of products is held at each branch that includes the following:

    Precision Welded Tube

    Cold Drawn Seamless Mechanical & Hydraulic

    Hot Finished Seamless Tube

    Carbon Hollow Bar

    Structural Hollow Sections

    Welded Gas List Tubes

    Stainless Steel Tubes

    Profiles & Shaped Tube

    Merchant Bar

    Architectural Systems in Steel & Stainless Steel

    Flo-Coat & Sculptured

  • A Division of Caparo Precision Tubes Limited

    EngineeringBAR ON

    Sales Hotline: 01902 407199 Email: bartonsales@barton-engineering.co.uk 3

    Index

    Heavy Gauge Conduit ..................................................................................................4

    Stocks, Dies & Guides ....................................................................................................5

    Boxes Circular Small - Large ..............................................................................6-7

    Boxes Circular Small Extension Pattern ..................................................8

    Boxes Looping In & Adaptors ................................................................................9

    Covers Circular Small - Large ............................................................................10

    Hooks, Nipples, Couplings ....................................................................................11

    Elbows, Tees, Bends, Rings, Washers ..........................................................12

    Bushes, Plugs & Glands, Reducers, Locknuts....................................13

    Saddles, Screws, Gaskets ........................................................................................14

    Adaptable Boxes ................................................................................................................15

    Flexible Metallic & PVC Metallic Conduit ..........................................16

    Adaptors for Flexible Conduit ..........................................................................16

    Switch & Socket Boxes, Earth Terminals ..............................................17

    Quick Fix Cable Trunking ..............................................................................17-20

    Lighting Trunking ..................................................................................................21-22

    Multi Compartment Trunking ..........................................................................23

    STANDARDSBarton products are generally manufactured in accordance with therelevant British Standards. Details of particular standards are given below:Product British and European

    (Euro Norm) StandardsConduit - steel BS 4568 part 1

    BS EN 50086-1:1994and BS EN 50086-2:1996 Metric sizesBS 31 Imperial sizes

    Conduit Fittings BS EN 50086-1:1994& Accessories and

    BS EN 50086-2:1996 Metric sizesBS 31 Imperial sizes

    Adaptable Boxes BS 4568 part 2Conduit - Flexible BS EN 50086-2-3:1996Switch & Socket Boxes

    BS 4662

  • A Division of Caparo Precision Tubes Limited

    EngineeringBAR ON

    Sales Hotline: 01902 407199 Email: bartonsales@barton-engineering.co.uk

    Please Note: 1. Pre-galvanised conduit does not meet the requirements of BS 4568 or BS EN 50086.It does not meet corrosion classifications defined in these standards.

    2. Binding materials used to make up bundles of Conduit are not intended to beused when lifting this product which should be handled only with approved slings.

    4

    Conduit Steel

    HEAVY GAUGECONDUIT WELDED- SCREWEDManufactured inaccordance with BS 31/BS4568/BS EN61386 & BSEN50086 (l.E.C. 614)where applicable. Each3.75 metre lengthscrewed both ends andcomplete with one solidcoupling.

    External No of lengths No of bundles Metres Approx weightDiameter per bundle per lift per lift per lift Tonnes

    BS 4568/BS EN 50086 Part 1Class 4 finish 20mm 8 50 1500 1.11HOT DIPPED GALVANISED 25mm 8 40 1200 1.13INSIDE & OUTSIDE 32mm 4 25 375 0.463.75 metre lengths

    BS 31 Class 4 finishHOT DIPPED GALVANISED 112 4 20 300 0.49INSIDE & OUTSIDE 2 4 20 300 0.743.75 metre lengths

    PRE-GALVANISEDINSIDE & OUTSIDE 20mm 8 50 1500 1.113.75 metre lengths 25mm 8 40 1200 1.13

    BS 4568/BS EN 50086 Part 1Class 2 finish 20mm 8 50 1500 1.11BLACK ENAMELLED 25mm 8 40 1200 1.13INSIDE & OUTSIDE 32mm 4 25 375 0.463.75 metre lengths

    BS 31 Class 2 finishBLACK ENAMELLED 112 4 20 300 0.49INSIDE & OUTSIDE 2 4 20 300 0.743.75 metre lengths

    Above conduit is packedand shipped in lifts (alsoknown as MasterBundles). Each liftcomprising the statednumber of individualbundles measuringapproximately 45-50centimetres in diameterand 3.75 metres long. Theweight varies according tosize and finish of conduitbut approximate weightsare shown above.

    Also available in 3000m lengths

  • A Division of Caparo Precision Tubes Limited

    EngineeringBAR ON

    Sales Hotline: 01902 407199 Email: bartonsales@barton-engineering.co.uk

    STOCKS, DIES, GUIDESComplete set Comprising Stock, Dies and Guides. To screw conduit dia. of 20-32mm.SD2025 Complete set comprising stock,

    die and guides for 20mm and - 25mm Conduit. Overall Dia. of Dies 42mm.

    SD32 Complete set comprising stock, die and guide for 32mm Conduit.Overall Dia. of Die 63.5mm

    Stock - SpareOverall Dia. of Die

    ST42 Stock 42mmST64 Stock 63.5mm

    Die - Spare Steel

    Overall Dia. of Die20mm Die 42mm DE2025mm Die 42mm DE2532mm Die 63.5mm DE32

    Guide - Spare Steel

    Overall Dia. of Die20mm Guide 42mm GE2025mm Guide 42mm GE2532mm Guide 63.5mm GE32

    DRAW-IN TAPES - Steel

    Size 20mtrs x 3.2mm DT20Size 30mtrs x 3.2mm DT30

    5

    Conduit Steel

  • A Division of Caparo Precision Tubes Limited

    EngineeringBAR ON

    Conduit Fittings & Accessories

    BOXES - CIRCULAR, SMALL60.3mm Internal diameter. 20mm Boxes - min 25mm deep 25mm boxes - min 28mm deep

    Tapped M4 at 50.8mm centres. with tapped hole in base for earthing screw.Supplied without covers or earthing screws unless ordered.

    Sales Hotline: 01902 407199 Email: bartonsales@barton-engineering.co.uk

    Terminal Box M181Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Through Box M182Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Angle Box M183Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Tee Box M184Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Intersection Box M185Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Back Outlet Box M186Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Terminal & Back Outlet Box M187Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Through & Back Outlet Box M188Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Angle & Back Outlet Box M189Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Tee & Back Outlet Box M190Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Intersection & Back Outlet BoxM191

    Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Tangent Through Box M192Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

    Tangent Angle Box M193Material: