Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=articl...self-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (4 of 16) [3/16/2015 2:52:38 PM]

● EventsTrade Shows/Nascar

Beast Recyclers / Horizontal Grinders

Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

The Model 3680 Beast Recycler is our most popular waste reduction unit. It has successfully been put into a multitude of applications producing salable products and exceeds other grinders in its class with noted production numbers of over 500 yards or more per hour. Now add mobility in the form of a steel-tracked undercarriage and think of the possibilities without the time consumed in skidding and forwarding materials. Biomass and bioenergy industries have found a perfect fit for this unit because of its ability to transform woody materials into specifically sized end products for pellet plants, paper plants, wood-fired boilers, and re-engineered wood products such as pressed board. Recycling yards and landfills chose the Model 3680 family as a solution for creating recycled products out of piled brush, whole trees, stumps, pallets, land clearing waste, palm fronds, logging slash, sawmill waste, construction waste, housing demolition, railroad ties, shingles, and asphalt. It features a 35" diameter capacity with its 35" x 60" mill opening and engine options ranging from 630 to 800 horsepower.

�❍ Trade Show CalendarUpcoming Trade Shows

�❍ Bandit Racing NascarNASCAR Sponsorship

�❍ Special EventsDealer/Customer Events

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=articl...self-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (5 of 16) [3/16/2015 2:52:38 PM]

The self-propelled Model 3680 Track is equipped with the patented Bandit cuttermill, which has proven to provide the most efficient means of breaking down a wide variety of materials. With a Bandit cuttermill you have the option of cutting, splitting, grinding and chipping with the opportunity to mix and match cutting devices to allow for the production of uniform material with varying sizes. The cuttermill turns downward, which not only helps to pull material into the mill but also allows it to be positioned for a decisive splitting action similar to an axe rather than a more violent, intensive, and less effective hammering action found on other grinding platforms. The result is less vibration, less fuel consumption, and more structural integrity when compared to machines that carry more weight and horsepower.

The Model 3680 Track features a 60-tooth setup on its cuttermill, allowing it to process a wide array of materials with ease with its 48" diameter by 63" wide dimensions. Different combinations and styles of cutterbodies and teeth can be configured to control the amount of bite, assist in forwarding material through the screening system, and dial in the preferred size and consistency of the end product. A chipper knife set-up can also be equipped on the Model 3680 Track, allowing it to produce a dimensional, screened chip that can be used for fuel and other applications demanding a consistent, high-quality, precisely-sized chip.

A three-speed 20-foot long by 60" wide double slat design track-type infeed conveyor bed chain serves material to the cuttermill from 18 to 43 feet per minute on the Model 3680 Track, where it is met by a 24" diameter x 60" wide internally driven floating top feed wheel in an arrangement that is easy to feed. The cutting action is performed against the infeed chain which eliminates the need for an anvil, thus there is not a gap that is created between the chain and an anvil for materials to collect and wedge. Component weight is distributed and supported on a sturdy frame constructed from 1/4" thick steel with 20" deep formed high tensile steel plating and cross-section bracing using continuous welds for structural integrity as opposed to bolt-together techniques. Thus, the Model 3680 Track possesses the necessary physical reinforcement to hold up for many years of service.

When it comes to determine how you want your material delivered, the Model 3680 Track offers plenty of choices when it comes to discharge options. The standard folding discharge conveyor is 30' long x 4' wide, two-speed at either 280 or 480 feet per minute, includes a magnetic head pulley for retrieving metal fragments or nails out of the flow of ground product, and has an approximate stacking height of 17'-6". For broadcasting chips over a site or loading end-opening chip vans, you can opt for an 18' long discharge with a hydraulic thrower. This device is mounted at the end of the conveyor and will swing 25 degrees side-to-side (50 degrees total), 34 degrees up, and 12 degrees down to give you directional control of placing your chips. Furthermore, you can opt out of the standard discharge and/or thrower and select an innovative swinging / pivoting discharge system that is controlled by radio remote control that features both a primary and secondary discharge. The secondary discharge pivots side-to-side 45 degrees with a maximum discharge height of 17'-6". This total folding discharge system can extend to 30' in length and also includes the magnetic head pulley.

Controlling your mobile Model 3680 Track is easy with a user-friendly radio remote control. The remote, along with tether remote back-up and 50' of cord, controls the yoke, infeed conveyor, discharge conveyor, engine throttle, and track functions from a comfortable distance.

The Model 3680 Track is designed to travel over rough and uneven terrain virtually impossible for other grinders to traverse. Caterpillar 325L and 325EL steel-tracked undercarriage gives this unit stabilty and durabilty for those tough grinding applications. Many options are available when it comes to selecting track pad widths and either single, double, or triple grouser configurations.

Customize your self-propelled Model 3680 Track to the fullest with many productivity enhancing options. For sizing material, select from a variety of square, rounded, baffled, or diamond screens ranging from 5/8" to 7" in diameter and gates up to 5" in diameter. Other add-ons worth considering are a larger 29-1/2" diameter x 60" wide top feed wheel, a feed speed drive package to accompany the radio remote, engine pre-cleaner, reversing fan options, work lights, a fold-down infeed tray, magnetic head pulley, and more. A full palette of standard and custom paint colors give you the freedom to choose the look of your brand or company.

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=articl...self-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (6 of 16) [3/16/2015 2:52:38 PM]

Versatility is defined by the Model 3680 Track. The unit can be configured specifically for shingle grinding with technology that allows a hot mix asphalt supplement to be produced in one-pass during any season at a rate of 100 tons per hour. For wood materials, a knife configuration on the cuttermill can essentially convert your Beast into a whole tree chipper for producing valuable products for energy industries. These are just a few of the real-world applications where can find a Model 3680 Track working daily and maneuvering around the landscape as an integral part of business.

The self-propelled Model 3680 Track, as with all Bandit Beast Recyclers, is designed and equipped with operator safety, user-friendly control, fuel efficiency, and simplified maintenance in mind. Components that are easily accessible save time on routine maintenance schedules and reduce downtime by being more serviceable out in the field. Feel free to contact a sales representative and ask about fuel savings statistics and production numbers based on your individual situation and needs. These factors, in combination with above-and-beyond factory support for your success, have proven over time that choosing a Bandit Beast Recycler is the best economical decision you can make for a long-term investment in a horizontal grinder.

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Model 3680 Track -...

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=articl...self-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (8 of 16) [3/16/2015 2:52:38 PM]

STANDARD EQUIPMENT

Repaceable cutter anvil

Radio remote control with tether remote back-up and 50' of cord (Controls yoke up, infeed conveyor forward/reverse, discharge conveyor start/stop, engine throttle, track functions, and engine e-stop).

FLYER - Biosawdust

Horizontal feed with a 42" diameter cut radius and a 63" wide cutter mill

24" diameter x 60" wide top feed wheel. Driven by (1) 12.2 cubic inch hydraulic motor with gearbox. Also features 1 3/4" feed wheel teeth located around and on sides of feed wheel.

Reversing Auto Feed System

Debris augers

VIDEO: Model 3680 ...

VIDEO: Bio-Sawdust...

VIDEO: Shingle Gri...

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=articl...self-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (9 of 16) [3/16/2015 2:52:38 PM]

14' 6" long x 60" wide double slat design track-type infeed conveyor bed chain with three speed drive (18 - 43 FPM). Driven by (1) 24 cu in hydraulic motor with gear box / chain drive combination. Also includes (2) side bend resistant infeed wings.

18' long x 4' wide two speed (280 FPM low, and 480 FPM high) stationary discharge system. (Has an approximate stacking height of 12' 5")

300 gallon fuel tank with magnetic drain plug and aluminum fluid sight gauge

Fire extinguisher with mount

Banded Kevlar drive belts with belt shield

(3) heat actuated fire suppression bombs

PAINT SELECTION

Special Imron Industrial Paint (please specify paint color and number)Special Imron 5000 Paint (please specify paint color and number)

BEAST PACKAGE SELECTION42" diameter hydraulic thrower for loading end opening chip vans or broadcasting chips over a site. Unit is mounted at the end of the discharge conveyor and will swing 25 degrees side to side (50 degrees total), 34 degrees up and 12 degrees down. (Note discharge will be a stationary 18' long x 4' wide set-up). 27 1/2' long x 4' wide height adjustable discharge system. Discharge will go down 20 degrees and up 32 degrees. Also includes magnetic head pulley located at the end of the discharge. (Has a maximum approximate stacking height of 15').Shingle machine set-up (Includes A4800 high wear resistant hood, fluted discharge idler wheel, wearmax augers, replaceable wear strips on side of housing, chain deflectors on infeed chain. (Must select fluid clutch with high drive options).

Electric over hydraulic shut down switches located on all four corners of machine

High capacity fold away radiator debris screen

150 gallon hydraulic tank with magnetic drain plug and aluminum fluid sight gauge

Safety DVD, (2) 6" wide x 9" tall Bandit operator's manuals (one paper copy and one waterproof copy tethered to machine) and (1) engine operator's manual

Lockable control cabinets with engine control panel

Screen changing arm

Liquid dust suppression system with spray nozzles

Standard Imron Industrial Urethane Bandit Yellow (For Whole Tree Chippers please specify Chipper Guard paint color)

Standard Imron Industrial Urethane Alert Orange (For Whole Tree Chippers please specify Chipper Guard paint color)

Standard Imron Industrial Urethane Cat. Yellow (For Whole Tree Chippers please specify Chipper Guard paint color)

Standard Imron Industrial Urethane Green (For Whole Tree Chippers please specify Chipper Guard paint color)

Standard Imron Industrial Urethane White (For Whole Tree Chippers please specify Chipper Guard paint color)

Standard Imron Industrial Urethane Black (For Whole Tree Chippers please specify Chipper Guard paint color)

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=artic...elf-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (10 of 16) [3/16/2015 2:52:38 PM]

ENGINE SELECTIONCummins QSK-19, 800-HP without clutch (Includes Flexxaire reversing fan) - Tier 2Caterpillar C18, 755 horsepower engine without clutch (Includes reversing fan) - Tier 4iCaterpillar C18, 765 horsepower without clutch - Tier 2Caterpillar C18, 765 horsepower with reversing fan and without clutch (short package for overseas) - Tier 2Caterpillar C27, 875-HP without clutch - Tier 2Volvo TAD1375VE, 551 horsepower engine without clutch (remote mounted radiator package with reversing fan) - Tier 4 FINALVolvo TAD1643VE, 768 horsepower engine without clutch (remote mounted radiator package with reversing fan) - Tier 2

TRACK SELECTIONCaterpillar Model 325EL steel track undercarriage with HD drive, (700 MM, 27 1/2" wide track pads), triple grouserCaterpillar Model 325EL steel track undercarriage (800 MM, 31 1/2" wide track pads), double grouserCaterpillar 325L steel track undercarriage (600 MM, 23 5/8" wide track pads), single grouserCaterpillar 325L steel track undercarriage (600 MM, 23 5/8" wide track pads), double grouser

CLUTCH SELECTIONHPTO14 PT Tech fluid clutch (476 to 765 hp)HPTO15 PT Tech fluid clutch (766 to 1,050 hp)

BEAST HEAD SELECTION30 tooth cutterhead option in lieu of 60

BEAST CUTTERBODY SELECTIONStandard Model 2680/3680 cutterbody - Swept Beam to be installed on machine (60 required for full set)Tooth holder cutterbody with replaceable raker insert holder (swept beam) (less insert) to be installed on machine (must select teeth, rakers, and raker insert bolts)Chipper knife holder cutterbody to be installed on machine (30 or 60 required for full set)

BEAST TEETH/KNIFE SELECTION1" XT carbide splitter tooth to be installed on machine (Used in most applications and is especially popular in land clearing applications and are often used by themselves or with carbide cutters, Butcher teeth, or G55 grinding teeth)XT Short Shingle tooth (pointed) to be installed on machine (A cutter style tooth with thicker carbide. Highly effective in processing shingles and are an excellent for grinding typical green waste)XT carbide forged splitter fan tooth to be installed on machine (features all of the benefits of a normal splitter tooth, plus the benefits of a fan tooth all in one. Very popular in land clearing and green waste applications and for processing pallets)XT blunt-nose carbide splitter fan forged tooth to be installed on machine (Thicker carbide splitter style tooth that will last longer than the 1" splitter tooth. Can be used in the same applications as the 1" splitter tooth)XT Short Shingle fan tooth (pointed) to be installed on machine (Regulates the amount of bite and pushes

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=artic...elf-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (11 of 16) [3/16/2015 2:52:38 PM]

material through the screen, usually used in conjunction with shingle teeth)2" wide double helmet head fan tooth to be installed on machineXT Helmet Head carbide tooth to be installed on machine (Excellent tooth for pallet and construction waste. Often used when processing light green waste, logging slash, and sawmill waste)XT Forged tooth with Lincor 55-G carbide impregnated weld to be installed on machine (Good tooth choice when grinding brush, light green waste, pallets, C & D. Good solution for material that contains contamination)45 degree carbide raker insert (for logs and chunk wood) to be installed on machine90 degree carbide raker insert (for leaves, and regrind) to be installed on machineRaker insert bolt (3/4-10 X 2 1/4" grade 8) to be installed on machine34 1/2 degree Chipper knife (1/2" x 2 1/8" x 4") to be installed on machine (to be selected with knife style cutterbodies, p/n 977-900722) ((26 required for 1680, 2680 and 3680 can have 30 or 60. If 30 knives are selected, you must also select 30 blank weight blocks))

Counter knife blank to be installed on machine. To be used in most applications, including Bio-Sawdust. (To be selected in lieu of counter-knife for these applications).Counter knife (3/8" x 2" x 3") to be installed on machine (The counter-knife blank replaces this item, but this option should still be used to produce a larger product).Blank fan tooth for chipper knife set-up to be installed on machineBlank weight block to be installed on machine3/4-16 flange hex nuts for chipper knives to be installed on machine (to be selected with p/n 977-900741)Double splitter tooth to be installed on machine (to be used on knife style cutterbody only p/n 977-900722)Double NR26 tooth to be installed on machine (to be used on knife style cutterbody only p/n 977-900722)HD weld pattern forged raker to be installed on machine (must select 900-4916-55 bolt)3/4" x 2 1/2" grade 8 hex head bolt (fine thread)XT 1" carbide tooth with double thick carbide to be installed on machine (Tooth of choice for processing big wood. These teeth require less power to drive the tooth through the material)2" Double NR26 fan tooth (shingle claw) to be installed on machineDouble flat carbide tooth to be shipped loose (to be used on knife style cutterbody only p/n 977-900722)

SCREENS SELECTION1/2" thick, 3/4" modified diamond screen to be installed on machine1/2" thick, 5/8" modified diamond screen to be installed on machine 3/4" thick, 1" modified diamond screen to be installed on machine3/4" thick, 1-1/2" modified diamond screen to be installed on machine3/4" thick, 2" modified diamond screen to be installed on machine3/4" thick ,3" modified diamond screen to be installed on machine3/4" thick, 4" modified diamond screen to be installed on machine3/4" thick, 5" modified diamond screen to be installed on machine3/4" thick, 6" modified diamond screen to be installed on machine3/4" thick, 7" modified diamond screen to be installed on machine3/4" thick, 1" round screen to be installed on machine

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=artic...elf-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (12 of 16) [3/16/2015 2:52:38 PM]

3/4" thick, 2" round screen to be installed on machine3/4" thick, 3" round screen to be installed on machine3/4" thick, 4" round screen to be installed on machine3/4" thick, 1" square screen to be installed on machine3/4" thick, 2" square screen to be installed on machine3/4" thick, 3" square screen to be installed on machine3/4" thick, 4" square screen to be installed on machineDemo-green landclearing/C&D screen to be installed on machine3/4" thick, 1" square baffle screen to be installed on machine3/4" thick, 1 1/2" square baffle screen to be installed on machine3/4" thick, 2" square baffle screen to be installed on machine3/4" thick, 3" square baffle screen to be installed on machine3/4" thick, 4" square baffle screen to be installed on machine

GATES SELECTIONGate- 18" Tall, 2" Square Baffle, Split Pin5/8" Diamond Gate Assembly (18" tall, 1 1/2" Pins) Gate- 18" Tall, 4" Diamond, Split Pin Gate - 2" Round, 18" Tall, Bolt in arms, short spoolsGate - 3" Round, 18" Tall, bolt in arms, short spools3" Round hole, 3/4" thick, 18" tall gate1" Modified diamond, 18" gate2" Modified diamond, 18" gate3" Modified diamond, 18" gate5" Modified diamond, 18" gate6" Modified diamond, 18" gate1" Round gate, 18" gate1" Square gate, 18" gate3" Square gate, 18" gate1 1/2" Modified diamond, 18" gate2" Square, 18" gate2" Round, 18" Gatechip breaker bottom section (3" Round, 18" gate)

FEED SYSTEM OPTIONSPressure compensated system with SIX speed infeed drive (10 - 60 FPM) & THREE speed discharge drive (350, 570, & 790 FPM) Infeed and discharge speed toggle controls to be added to remote control (Must select radio remote option and feed speed drive package on Model 2680)

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=artic...elf-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (13 of 16) [3/16/2015 2:52:38 PM]

29 1/2" diameter x 60" wide top feed wheel. Also features 1 3/4" feed wheel teeth located around and on sides of feed wheel.Proportional Hydraulic feed System in lieu of standard (must select fluid clutch)

COLORING OPTIONSBandit self contained hydraulic driven wet coloring system (Includes a variable volume pump with line to hook into spray bar, drop tube for the colorant container, water intake line and a remote control to adjust the flow of water and colorant from the pump. The system can be mounted on the Beast or can be skid mounted. The hydraulic drive taps into the hydraulic system of the machine).

INFEED OPTIONSWide flair infeed (new style)Hydraulic infeed chain lockSteel fold down infeed tray

ENGINE RELATED OPTIONS

110 volt engine block and 120 volt hydraulic tank heater for Cummins engines Proheat Engine Heater

DISCHARGE OPTIONS30' long x 4' wide two speed (280 FPM low, and 480 FPM high) folding discharge system. (Has an approximate stacking height of 17' 6")Magnetic head pulley

HYDRAULIC OPTIONSInfeed and feed wheel flow control kit (Must select feed speed drive package option on Model 2680's)

EXTENDED WARRANTY OPTIONS5 year / 5,000 hour 'Platinum' Caterpillar engine warranty (C15 ENGINES) (For Caterpillar C18 engines)

MISCELLANEOUS OPTIONSFan purge on controller

48" diameter Flexxaire full variable pitch auto reversing cooling fan for Caterpillar C18 engines (Prevents engine overheating, improves machine efficiency and reduces fuel consumption) (Available on Caterpillar C15 & C18 engines)

42" diameter full variable pitch Flexxaire auto reverse cooling fan for Cummins QSK19 engines (Prevents engine overheating, improves machine efficiency and reduces fuel consumption) (Available on Cummins QSK19 engines)

56" diameter Flexxaire full variable pitch auto reversing cooling fan for Caterpillar C27engines (Prevents engine overheating, improves machine efficiency and reduces fuel consumption) (Available on Caterpillar C27 engines)

Engine pre-cleaner - Engine Air

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

http://www.banditchippers.com/index.php?option=com_content&view=artic...elf-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (14 of 16) [3/16/2015 2:52:38 PM]

44 point automatic greaser system with timer

Wrench and socket tool kit for air compressor (Includes: (1) Ingersol-Rand Model IR2141 (3/4" drive) air wrench, (1) 1 1/2" impact socket for cutterbody bolts, (1) 1 15/16" impact socket for tooth nuts, (1) 1 1/8" impact socket, and quick couplers and hose).25' hose reel for air compressor

BEAST HEAD OPTIONSChipper drum for Beast with knives & holders to be installed on machine (10 knife) (Note: this option does NOT include the standard mill)Chipper drum for Beast with knives & holders to be shipped loose (10 knife) (Note: this option DOES include the standard mill)Bolt in anvil for chipper drum (must also select option number 977-201083)Chipper drum anvil / infeed spacer

BEAST CUTTERBODY OPTIONS

BEAST TEETH/KNIFE OPTIONSHand held knife grinder80 grit belt for hand held knife grinder

XT carbide forged splitter fan tooth to be shipped looseXT blunt-nose carbide forged splitter fan tooth to be shipped loose

Raker insert bolt (3/4-10 X 2 1/4" grade 8) to be shipped loose

Special side decal applied to each side of infeed hopper

Air compressor with 13 horsepower Honda gas engine, battery disconnect, 50' hose, and 24 gallon air tank. Also Includes: (1) Ingersol-Rand Model IR2141 (3/4" drive) air wrench, (1) 1 1/2" impact socket for cutterbody bolts, (1) 1 15/16" impact socket for tooth nuts, (1) 1 1/8" impact socket, and quick couplers and hose.

Replaceable raker cutterbody with swept beam (to be shipped loose (60) required for full set)

Tooth holder cutterbody with thicker web to be shipped loose

Chipper knife holder cutterbody to be shipped loose

XT 1" carbide cutter tooth with double thick carbide to be shipped loose

XT Helmet Head carbide tooth to be shipped loose

XT Oversized splitter carbide tooth to be shipped loose

XT carbide splitter tooth to be shipped loose

XT Forged tooth with Lincor 55-G carbide impregnated weld to be shipped loose

45 degree carbide raker insert (for logs and chunk wood) to be shipped loose

90 degree carbide raker insert (for shingles, leaves, and regrind) to be shipped loose

34 1/2 degree chipper knife (1/2" x 2 1/8" x 4") to be shipped loose

Counter knife (3/8" x 2" x 3") to be shipped loose (The counter-knife blank replaces this item, but should still be used to produce a larger product).

Dealer Network Search

Product:

State:

Country:

Browse

● Bandit Product Line

● Used Equipment Listings

● Trade Show Event Calendar

● Testimonials / Customer Stories

● Latest News

You are here: Home Product Line Beast Recyclers / Horizontal Grinders Self-Propelled Track Beast Recyclers / Horizontal Grinders Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

Top

Bandit Industries, Inc. - Model 3680 Track - Self-Propelled Beast Recyclers / Horizontal Grinders

Dealer Login

Username

Password

Remember Me

● Forgot your password?

● Forgot your username?

http://www.banditchippers.com/index.php?option=com_content&view=artic...elf-propelled-beast-recyclers-horizontal-grinders&catid=29&Itemid=147 (15 of 16) [3/16/2015 2:52:38 PM]

● < Prev ● Next >

For detailed specifications please contact your local authorized Bandit dealer. No used equipment listings of this model available at this time.

Blank fan tooth for chipper knife set-up to be shipped loose

Counter knife blank to be shipped loose. To be used in most applications, including Bio-Sawdust. (To be selected in lieu of counter-knife for these applications).Double splitter tooth to be shipped loose (to be used on knife style cutterbody only p/n 977-900722)Double NR26 tooth to be shipped loose (to be used on knife style cutterbody only p/n 977-900722)

SCREEN OPTIONS3/4" thick, 1 1/2" square baffle screen to be shipped loose

BEAST GATE OPTIONS

Blank weight block to be shipped loose

3/4" x 3" stub for chipper knives to be shipped loose

3/4-16 flange hex nuts for chipper knives to be shipped loose

3/4" thick ,3" modified diamond screen to be shipped loose

3/4" thick, 4" modified diamond screen to be shipped loose

3/4" thick, 1" square baffle drop gate to be shipped loose

3/4" thick, 2" modified diamond drop gate to be shipped loose

3/4" thick, 4" modified diamond drop gate to be shipped loose