beast 3680 especifications

Download Beast 3680 Especifications

Post on 11-Dec-2015

4 views

Category:

Documents

2 download

Embed Size (px)

DESCRIPTION

Bandit 3680 BEAST especifications.

TRANSCRIPT

  • WINTER - SPRING CATALOG 2007

    BANDIT INDUSTRIES, INC.

    MODELS 2680, 3680, 4680 & 5680

    Simply the best machines for turning unwanted waste into valuable products such as landscape mulch, boiler fuel, animal bedding, hot mix asphalt

    supplement (from shingles) and a raw material for pressed board.

    LOCAL / INTERNATIONAL CALLS: 1-989-561-2270

    Break down big material faster, consuming less energy and fuel. Produce a multitude of recycled products that command top dollar. Recycle materials at the lowest possible cost. Economical. Easy to service, maintain, and operate.

  • WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | APPLICATIONS

    Bandits Beast Recyclers process an amazing array of materials such as stumps; logs; brush; wet leaves; whole trees; landscape waste; pallets; railroad ties; telephone poles; housing demolition; sawmill, logging, chip mill and paper mill waste; plastic materials, including plastic car parts and European type refrigerators; lime cake; shingles and more.

    The most important benefit of the Beast is the quality and uniformity of the end product. Breaking down materials by cutting, splitting or grinding provides a multitude of options for producing a desired end product. Various tooth options, screens of almost any size or shape and the ability to change the infeed conveyors feed speed allows you to produce material uniform in size and consistency to bring top dollar. Tool options controlling the cut, split or grind enable the Beasts to deliver the best mulch products, the most uniform raw material for pressed board, the most acceptable boiler fuel and the best hot mix asphalt supplement from shingles.

    In fact, no other grinder will produce a hot mix asphalt supplement from shingles in a single pass without screening as well as the Beast. These cuttermills break down shingles, creating less heat than a conventional grinder, allowing you to grind shingles year round.

    Bandit Beast waste recyclersFOUR MACHINES...SO MANY POSSIBLEAPPLICATIONS!

    SHINGLE WASTE

    PALM WASTE

    PALLET WASTE

    CLEARING WASTE

    Bandit Stump GrindersFeaturing eleven high-production stumpers, available both as towable and self-propelled models.

    Bandit Hand-Fed ChippersThe original Brush Bandit chippers: proven, rugged, simple machines that provide years of dependable service.

    For additional information, ask for any of these Bandit catalogs!want to see live footage

    of Bandit equipment?Request our FREE DVD!

    Bandit Whole Tree ChippersUnique machines that quickly and efficiently convert whole trees into dimensional chips.

    Bandit Multi-LineFeaturing our entire line of chippers, grinders and waste recyclers.

    1

    OvERvIEWPages 1 - 2

    bEAST hEAd OPTIONSTwo head options to choose from: our patented beast cuttermill, and the new dragonheadPages 3 - 4

    TEETh ANd OPTIONSIntroducing a new, highly durable line of beast teethPages 5 - 6

    MAINTENANCE TIPS & UNIQUE FEATURESPages 7 - 8

    SELF-PROPELLEd WASTE RECYCLERSThe ultimate landclearing machines, now on tracksPage 9

    MOdEL 2680Compact and economically pricedPage 10

    MOdEL 3680Our most popular beastPage 11

    MOdEL 4680high-production, high-horsepowerPage 12

    MOdEL 5680The ultimate waste reduction machinePage 13

    COLOR CRITTER IIThe most economical way to make colored mulchPage 14

    INdEX

    QUESTIONS? COMMENTS?Bandit Industries, Inc. attributes

    much of its success from listening to the suggestions of those who use their

    equipment on a daily basis.

    visit our website to locate an authorized bandit dealer in your area!

    Have a question or comment for Bandit? Contact us by mail, telephone,

    or via the Internet at any time.

    bANdIT INdUSTRIES, INC.6750 Millbrook Road

    Remus, MI 49430

    TOLL FREE TELEPHONE(800) 952-0178

    LOCAL / INTERNATIONAL(989) 561-2270

    EMAIL: sales@banditchippers.comONLINE: www.banditchippers.com

    2

    MULCH: In many parts of the United States, tree services are taking green waste with negative value and are making high quality mulch for about $3.50/cubic yard. The mulch then sells for $11-25/cubic yard. Now thats a favorable return on investment!

    BOILER FUEL: High oil costs are driving an increase in demand for wood energy. Our Beasts will help meet that demand by producing an ideal wood fuel product in a single pass with few fines.

    PRESSED BOARD: The Beast will produce a consistent pin-type product for making pressed board. It can also be mixed with sludge to burn unwanted materials in a boiler.

    THE BEAST WILL MAKE YOU MONEY!The quality of the product produced by the Beast gives you so many new market options.

    FIRST CLASS PARTS AND SERVICE SUPPORT. The Bandit Beast Recyclers are backed up by a group of highly trained service technicians. Our specially designed service trucks are equipped with all the tools to service the Beast Recycler and they carry a wide range of parts. Our trucks are also capable of pulling our 2680 and 3680 Beast Recyclers. In addition, most of Bandits 100+ dealers service and support our Beast Recyclers. We also have a staff of trained parts and service specialists at our main facility in Remus, MI ready to serve you.

    Call today to schedule an appointment.

    1-800-952-0178Local/International: 1-989-561-2270

  • YOU CAN CUT, SPLIT OR GRINDWITH THE BEASTS PATENTED CUTTERMILL

    Our famous, patented Beast cuttermill is the best choice for larger materials and materials that are relatively clean and the best mill for making dimensional products: the original head that can cut, split and grind.

    Patented Beast Cuttermill

    THE BEASTS CUTTING ACTION IS BEST DESCRIBED BY COMPARING AN AX TO A SLEDGEHAMMER. WHICH

    WOULD YOU RATHER USE TO CUT DOWN A TREE?

    THE BEASTS UNIQUE, PATENTED CUTTERMILL DESIGN ALLOWS YOU TO CUT, SPLIT OR GRIND. SAWTOOTH CUTTER HOLDER

    This break-away tool holder, designed like a sawtooth, regulates the depth of cut and provides some protection from foreign materials. Production is maximized while making a consistent product and protecting the mill.

    SAWTOOTH CUTTER WITH RAKER INSERTA raker ahead of the cutting tool regulates the length of cut while providing the breakaway tool holder some protection from rocks, steel and other foreign materials. The raker isavailable as a replaceable insert.

    BREAK-AWAY CUTTER HOLDERThe cutter holder limits the bite of the cutting, splitting or grinding tool which is important in controlling the size of the product and helps maximize engine horsepower by not taking too large of a bite. The fixed break-away tool holders are heavy enough to cut through most materials, including nails, spikes and metal. When striking materials such as rock and heavy metal, the tool holders bend back out of the way, protecting the cuttermill and limiting damage to only a few holders and a few bits. Damaged bits can be replaced in minutes. The tool holders attach to the arms with two Grade 8 bolts. Should foreign material heavily impact the tool holder and break, the bolts will keep the tool holder in place. This will prevent the broken piece from ruining any more holders or cutting tools.

    cUt, sPlit, Or GrindtwO Mills tO cHOOse FrOM, endless POssiBilities

    WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | CUTTERMILLS

    3

    THE

    ORIGINALCUTTERMILL

    Beast Cuttermill Attachments

    UNIQUE CUTTERBODIES PROVIDE A SMOOTH, CONTROLLED CUT AND PROTECT THE MILL WHEN ENCOUNTERING CONTAMINANTS.

    FEATURING: 60 TEETH

    Discharge Conveyor

    4

    THE DRAGONHEAD IS THE MILL FOR LIGHTER, MORE ABRASIVE MATERIALS

    A more traditional grinding head with cutting tool options for processing bigger materials. The Dragonhead is ideal for dirtier applications, such as construction debris, and is also a good choice for regrind.

    The All-New Dragonhead

    CUTTERMILLS | WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG

    nO Matter tHe tasK at Hand:tHe Beast Has yOU cOvered!

    You know that a Beast is the best for your operation, but which method is right for you?

    Although our original cuttermill isthe best for most applications, the Dragonhead is recommended for processing pallet and construction waste, compost, and for certain regrind applications. With the Dragonhead, the Beast can be as much as 30% more productive in certain applications than a Beast with a cuttermill and/or a conventional grinder.

    Contact Bandit today to learn more about our cutting and grinding options.

    The Dragonhead comes equipped with thirty teeth. Depending on the material being ground, the Dragonhead has two styles of teeth available:

    Dragonhead Tooth Options

    Double-Splitter ToothFor applications dealing with larger diameter material.

    Dual-Sided Grinding ToothEach side is impregnated with Tungsten carbide for durability, ideal for most grinding applications.

    THE DRAGONHEAD MILL HAS BEEN SHOWN TO INCREASE PRODUCTIVITY BY NEARLY 30% IN CERTAIN APPLICATIONS.

    FEATURING: 30 TEETH

  • FALL - WINTER 2006 BEAST WASTE RECYCLER CATALOG | WEAR PARTS - TEETH

    5

    Quality Bandit Wear PartsParts that maximize production while minimizing cost.Our Bandit Beast Recyclers allow you to run one or more different styles of teeth in the machine at one time to provide maximum efficiency and to make the best possible product. The cuttermill in our Beast has two spirals, making it easy and efficient to run one or more types of teeth. For most applications, running a combination of two styles works best.

    XT Extender Line of TeethFor the Beast Cuttermill. Now featuring: Better carbide for the cutters and splitters. Better bonding process that makes it virtually impossible to separate