b. basic operations - mold ex-press 3d model. 33 4 5 1 2 33 sw at the time of importing model on...
TRANSCRIPT
B. Basic Operations
< ICON GUIDE>Some of function in Mold EX-Press limits CAD software.Please refer to the ICONs shown in the bottom each page.
ACAC AutoCad
CACA CATIA SWSW SolidWorks
NXNX NX P/EP/E Pro/ENGINEER
CRCR PTC Creo
23
B1-1. Functions in Home , the 1st page
Select partsby image
Select partsby diagram
Select parts fromMy Favorite list
Select parts fromHistory list
Search by variousconditions in complex
Select parts by part namedirectory in tree-structure
Home
BOM list
Help
Shortcut to My Library
Functions of Mold EX-Press for Press DieSearch box
24
B1-2. Functions in 【Product Type Selection】, the 2nd page
Product selection by category
Product selection by specification
Product guide
Product selection by part type
09
Select detailed option *Function for required parts
Confirm Remarks
Add to [My Favorite]*Only available for selected category.
25
B1-3. Functions in 【Product Configuration - 2D view】, the 3rd page
2D view image
Product photo, Tip shape, and additional information are shown
10
Select Alteration
Add Remarks
Open paper catalog in PDF formats
In case no relation to CAD, [BOM] comes out and you can hold Parts List by type.
In case relation to CAD, [CAD] comes out and you can import the
model to CAD related system.
Add to [My Favorite]
Select Size
Available misumi part number comes out
26
B1-4. Functions in 【Product Configuration - 3D view】, the 3rd page
View in shading
Switch view direction
View in wire frame
Fit (to the center)
3D view image
View in shading with edges
Open quick command summary
In case no relation to CAD, 「BOM」 comes out and you can hold Parts List by type.
In case relation to CAD, 「CAD」 comes out and you can import the
model to CAD related system.
27
B1-5 Functions in 【Selecting parameter details-File output】, the 3rd page
Export model.
Set the export category.
*This screen setting is linked to options of [Setting &Help] - [Export Model/ CAD relation]
Select save-in address.
Select save file name.
Resetting to default.
28
B1-6. Functions in BOM list
Selection box(for deletion)
Export to MS Excel sheet
Import from MS Excel sheet
Click to customize BOM information
Combine the same part numbers to a
single row
Click to open product photo. Click again to close.
Click to sortDelete the selected product from BOM
list.
Reset the current list and create a new
BOM list.
29
30
Display the [Home] for selecting product model.
Select the product shape with scrollbar on the upper-left image(Selection of the basic shape).
Complete parameters for the basic size.
Press [CAD] button
Position the part as per NX method.
B2-1. How to use Mold EX-Press in NX
By three-step selection, the 3D drawing of the part can be configured and placed directly into the CAD by seamless connection with NX. The model structure is set at non-assembly mode as default.
[Key point]Click [CAD] to generate the 3D drawing after confirming the shape and parameters.
[Key point] In case no relation to CAD,
mark comes out instead of .
Selected parts will add to part list.
22
33
44
55
11
NXNX31
Go to [Help] and open [MODEL OUTPUT CAD setting].
The default output mode is Multi-body (non-assembly), shown at right, for a product type TSSB.
Select "Assembly" in the NX setting. Then click "Confirm".
The model can be exported with assembled structure.
B2-2. Switching modeling mode to assembly
NX can apply two different modeling structures, assembly or multi-body (non-assembly). You can select your required modeling to meet your preferred structure.
22
33
44
11
NXNX 32
[Key point] In case no relation to CAD,
mark comes out instead of .
Selected parts will add to part list.
Display the [Home] from SolidWorks menu, and select the product category.
B2-3. How to use Mold EX-Press in SolidWorks
By three-step selection, the 3D drawing of the part can be configured and placed directly into the CAD by seamless connection with SolidWorks.
Select the product shape with scrollbar on the upper-left image(Selection of the basic shape).
Complete parameters for thebasic size.
Press [CAD] button.
Position the part as per SolidWorks method.
[Key Point]
Click [CAD] you can reconfirm the model configuration and size before exporting 3D model.
33
44
55
11
22
SWSW33
At the time of importing model on Solidworks, cross section comes out as per right figure.
B2-4. SolidWorks not in configured
By three-step selection, the 3D drawing of the part can not be configured following steps for recovering in SolidWorks.
Click[Open]in Tool Bar and select [.sat] from file type. Then, click [Option…]button.
In the [General] window, check①[B-Rep mapping] and check ②[Input parts as multibody]. Then, click [Decided]+.
Complete for solution.
3311
22 44
SWSW 34
B2-6. How to use Mold EX-Press in CATIA
B2-5. How to use Mold EX-Press in CATIA
You can complete only with 3 steps, selection of parts, model preview and 3D view .
Display Home and select any category and go to [Purchase].
In [Purchase], select part configuration (basic structure) referring to the photo upper left handtop .
[Product Configuration] page. Select a measurement type.
[Key Point]
Click [CAD] you can reconfirm the model configuration and size before exporting 3D model.
Press [CAD] button.
Operate assemblyparts by CATIA.
[Key point] In case no relation to CAD,
mark comes out instead of .
Selected parts will add to part list.
11
22
33
44
55
CACA35
B2-6. How to use Mold EX-Press in Pro/E・Creo
The part models created by Mold EX-Press can be exportedin intermediary format that allows to import to CAD software youuse. The operational method below shows the procedure in thepresence of Pro/E.
After selecting parameter,go to [Model Output ].and click Generate.
Models are stored in your selected format.DWG,DXF,IGS,STP,SATand PARASOLID available.
Select command for opening the folder from Pro/E tool-bar .
Select your required model for importing the format.
11
22
33
44
Complete for import.55
CRCRP/EP/E 36
Display the Home forproduct model selection.
Select the product shapewith scrollbar on the upper-left image(Selection of the basic shape) .
Complete parameters for thebasic size.
Select the productlayout view as per the productrequirements,such as 3D view.
Configure the partin CAD.
B2-7. How to use Mold EX-Press in AutoCAD
By three-step selection, the 3D drawing of the part can beconfigured and located directly into the CAD by seamless connection with AutoCAD.
[Key point]
Click [CAD], you can reconfirm the model configuration and size before exporting 3D model.
33
44
55
11
22
ACAC37
Click right handMold EX-Press iconon desk top and open[Property], Go to [Working folder] and open [Mold EX-Press].
Click the right mouse button in Mold EX-Press folder. Example:D:\Program files\MISUMI_P_G [Property]→[Security」]and go to [Edit].
B2-8. Not to operate the model introduction in CAD system
In case you are not to operate the model introduction in CAD system. I may be caused by authority setting. Please try to revise the problem in following operation. .
Go to [Group name or user name]and select [Users]. In [Authority], go to [Full control] and click [OK] in [Validate].
The system is starting to validate and automatically close the window after the validation. Them you can use the data..
33
4422
11
ACAC CACA NXNXSWSW 38
After completing Parameter, click [model output] and change tab.
First, set up the file namerule, intermediary formatto output and path of a folder to save CAD files.
Click the [Generate]to export the drawing.
The drawings are saved asspecified in Model Output CAD Setting.
B2-9. Exporting 3D drawing in intermediary format
If you don’t have CAD other than AutoCAD, NX, Pro/E, CREO or Solidworks, the DWG, DXF, IGES, STEP, SAT and PARASOLID formats can be exported from Mold EX-Press so that they are compatible with the various 2D and 3D design software.
You can revise the data input by Step ① from this window.
[Key pint]
33
44
11
22
39
40