astro sign-brac overhead street name signs cable mount · astro sign-brac overhead street name...
TRANSCRIPT
Page T6-1www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
SAstro Sign-BracOverhead Street Name SignsCable Mount
10/11/17
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
2 Sign ClampsSign: 18” 24” 30” 36”
Max CTC: 12” 18” 24” 30”
4 Sign ClampsSign: 42” 48” 54” 60” 66” 72” 78” 84” 90” 96”
Max CTC: 36” 42” 48” 54” 60” 66” 72” 78” 84” 90”
6 Sign ClampsSign: 102” 108” 114”
Max CTC: 96” 102” 108”
Notes:
130 mph wind zone maximum: 16 sq-ft150 mph wind zone maximum: 12 sq-ft
1. Capacities listed are only for applications with the clamp kit mounted in the center of the sign.2. Signs must be properly engineered for specific application. 3. Tube length is 4” longer than maximum CTC.
CTC
SIGN LENGTH
Astro Sign-Brac, Galaxy Cable Mountfor Overhead Street Name Signs
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AG-0144 - - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
CTC
*See Chart
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
Astro Sign-Brac, Stellar Cable Mountfor Overhead Street Name Signs
AS-0144 - - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
CTC
*See Chart
AS-3009Clamp Kit
AB-0502Sign Clamp
AB-3055Clamp Kit
AB-0502Sign Clamp
Page T6-2 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Astro Sign-Brac, Stellar Tenon Mountfor Overhead Street Name Signs
AS-0662 - - CTC
*See Chart
Coating
PNC=Process No ColorP_ _=Paint
Astro Sign-BracOverhead Street Name SignsBand and Tenon Mount
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
CTC
SIGN LENGTH
2 Sign ClampsSign: 18” 24” 30” 36”
Max CTC: 12” 18” 24” 30”
4 Sign ClampsSign: 42” 48” 54” 60” 66” 72” 78” 84” 90” 96”
Max CTC: 36” 42” 48” 54” 60” 66” 72” 78” 84” 90”
6 Sign ClampsSign: 102” 108” 114”
Max CTC: 96” 102” 108”
Notes:
130 mph wind zone maximum: 16 sq-ft150 mph wind zone maximum: 12 sq-ft
1. Capacities listed are only for applications with the clamp kit mounted in the center of the sign.2. Signs must be properly engineered for specific application. 3. Tube length is 4” longer than maximum CTC.
Note:Fits 1.9” to 4.5” diameter.
AB-3010Clamp Kit
AB-0502Sign Clamp
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
AS-0128 - - - -CTC
*See Chart
Coating
PNC=Process No ColorP_ _=Paint
BandLength
See Note
ClampScrew
Blank=Galv SS=Stainless
Astro Sign-Brac, Stellar Band Mountfor Overhead Street Name Signs
AB-0502Sign Clamp
AS-3004Clamp Kit
Page T6-3www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Astro Sign-BracOverhead Street Name Signsw/ Signal Mount
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws or cable.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Max CTC: 24” 30” 36” 42” 48” 54” 60”
Tube Length: 46” 52” 58” 64” 70” 76” 82”
AS-3009Clamp Kit
AB-0502Sign Clamp
Notes:
130 mph wind zone maximum: 16 sq-ft150 mph wind zone maximum: 12 sq-ft
1. Capacities listed are only for applications with the clamp kit mounted in the center of the sign.2. Signs must be properly engineered for specific application. 3. Tube length is 4” longer than maximum CTC.
CTC
TUBE LENGTH
Astro-Brac Assy, Stellar Band Mountfor Sign w/ Signals
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
AS-0195 - - - -CTC
*See Chart
Coating
PNC=Process No ColorP_ _=Paint
BandLength
See Note
ClampScrew
Blank=Galv SS=Stainless
Astro-Brac Assy, Stellar Cable Mount for Sign w/ Signals
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AS-0196 - - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
CTC
*See Chart
AS-3004Clamp Kit
AB-0502Sign Clamp
Page T6-4 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
This page is intentionally left blank.
Page T6-5www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
SAstro Sign-Brac Formed TubesCable Mount
10/11/17
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Notes:
90 mph wind zone maximum: 16 sq-ft
1. Capacity listed is only for applications with the clamp kit mounted in the center of the sign.2. Signs must be properly engineered for specific application. 3. For higher wind zones and multiple brackets use assemblies shown on T6-1 & T6-2.
CTC
Max CTC: 9” 12” 15” 18” 24” 30” 36” 42” 48” 60”
Sign Length: 15” 18” 21” 24” 30” 36” 42” 48” 54” 66”
Astro Sign-Brac, Galaxy Cable Mount, Formed Tube
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AG-0142 - - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
CTC
*See Chart
Astro Sign-Brac, Stellar Cable Mount, Formed Tube
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AS-0142 - - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
CTC
*See Chart
AB-3055Clamp Kit
AB-0507Sign Brac w/ Hdwr
AS-3009Clamp Kit
AB-0507Sign Brac w/ Hdwr
Page T6-6 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Astro Sign-Brac Formed TubesBand & Tenon Mount
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Notes:
90 mph wind zone maximum: 16 sq-ft
1. Capacity listed is only for applications with the clamp kit mounted in the center of the sign.2. For higher wind zones and multiple brackets use assemblies shown on T6-1 & T6-2.3. Signs must be properly engineered for specific application.
CTC
Max CTC: 9” 12” 15” 18” 24” 30” 36” 42” 48” 60”
Sign Length: 15” 18” 21” 24” 30” 36” 42” 48” 54” 66”
AS-3004Clamp Kit
AB-0507Sign Brac w/ Hdwr
Astro Sign-Brac, Stellar Tenon Mount, Formed Tube
AS-0179 - -CTC
*See Chart
Coating
PNC=Process No ColorP_ _=Paint
AS-3010Clamp Kit
AB-0507Sign Brac w/ Hdwr Note:
Fits 1.9” to 4.5” diameter.
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
AS-0105 - - - -CTC
*See Chart
Coating
PNC=Process No ColorP_ _=Paint
BandLength
See Note
ClampScrew
Blank=Galv SS=Stainless
Astro Sign-Brac, Stellar Band Mount, Formed Tube
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Page T6-7www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Astro Sign-Brac Formed TubesAtlas Articulated Mounts
AB-0507Sign Brac w/ Hdwr
AB-3026Clamp Kit
AB-0507Sign Brac w/ Hdwr
AS-3029Clamp Kit
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Notes:
90 mph wind zone maximum: 16 sq-ft
1. Capacity listed is only for applications with the clamp kit mounted in the center of the sign.2. For higher wind zones and multiple brackets use assemblies shown on T6-1 & T6-2.3. Signs must be properly engineered for specific application.
CTC
Max CTC: 9” 12” 15” 18” 24” 30” 36” 42” 48” 60”
Sign Length: 15” 18” 21” 24” 30” 36” 42” 48” 54” 66”
Astro Sign-Brac, Atlas Articulating Cable Mount, Formed Tube
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AS-0136 - - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
CTC
*See Chart
Astro Sign-Brac, Atlas Articulating Band Mount, Formed Tube
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
AS-0135 - - - -CTC
*See Chart
Coating
PNC=Process No ColorP_ _=Paint
BandLength
See Note
ClampScrew
Blank=Galv SS=Stainless
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws or cable.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Page T6-8 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
Astro Sign-Brac Formed TubesVertical Extension Mounts
10/11/17
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
AB-3034Clamp Kit
AB-0507Sign Brac w/ Hdwr
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws or cable.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Notes:
90 mph wind zone maximum: 16 sq-ft
1. Capacity listed is only for applications with the clamp kit mounted in the center of the sign.2. For higher wind zones and multiple brackets use assemblies shown on T6-1 & T6-2.3. Signs must be properly engineered for specific application.
CTC
Max CTC: 9” 12” 15” 18” 24” 30” 36” 42” 48” 60”
Sign Length: 15” 18” 21” 24” 30” 36” 42” 48” 54” 66”
AB-3006Clamp Kit
AB-0507Sign Brac w/ Hdwr
Astro Sign-Brac, Vertical Extension Cable Mount, Formed Tube
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
NippleLength
5=5” Nipple 6=6” Nipple 8=8” Nipple
AB-0189 - - - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
CTC
*See Chart
Astro Sign-Brac, Vertical Extension Band Mount, Formed Tube
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
BandLength
See Note
ClampScrew
Blank=Galv SS=Stainless
NippleLength
5=5” Nipple 6=6” Nipple 8=8” Nipple
AB-0134 - - - - -Coating
PNC=Process No ColorP_ _=Paint
CTC
*See Chart
Page T6-9www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Astro Sign-Brac Electrical TypeStellar Series
AS-3004Clamp Kit
AS-3009Clamp Kit
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Astro Sign-Brac, Stellar Cable Mount, Back Attachment for Internally Illuminated Signs
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AS-0650 - - - -
Tube Length
23=23” Tube37=37” Tube46=46” Tube58=58” Tube74=74” Tube
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
Astro Sign-Brac, Stellar Band Mount, Back Attachment for Internally Illuminated Signs
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
AS-0104 - - - -
Tube Length
23=23” Tube37=37” Tube46=46” Tube58=58” Tube74=74” Tube
BandLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
ClampScrew
Blank=Galv SS=Stainless
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws or cable.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Page T6-10 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws or cable.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Astro Sign-Brac Electrical TypeStellar Series
AS-3004Clamp Kit
SE-3042Assembly Kit
AS-3009Clamp Kit
SE-3042Assembly Kit
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Astro Sign-Brac, Stellar Band Mount, Back Attachment for Internally Illuminated Signs and Signals
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AS-0107 - - - -
Tube Length
23=23” Tube37=37” Tube46=46” Tube58=58” Tube74=74” Tube
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
Astro Sign-Brac, Stellar Cable Mount, Back Attachment for Internally Illuminated Signs and Signals
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
AS-0651 - - - -
Tube Length
23=23” Tube37=37” Tube46=46” Tube58=58” Tube74=74” Tube
BandLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
ClampScrew
Blank=Galv SS=Stainless
Page T6-11www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Astro Sign-Brac Electrical TypeCable MountPelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
AS-3009Clamp Kit
AB-3055Clamp Kit
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Astro Sign-Brac, Galaxy Cable Mount Top & Bottom Attachment for Internally Illuminated Signs
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AG-0652 - - - -
Tube Length
23=23” Tube37=37” Tube46=46” Tube58=58” Tube74=74” Tube
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
Astro Sign-Brac, Stellar Cable Mount Top & Bottom Attachment for Internally Illuminated Signs
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
AS-0652 - - - -
Tube Length
23=23” Tube37=37” Tube46=46” Tube58=58” Tube74=74” Tube
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
Page T6-12 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel clamp screws.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Astro Sign-Brac Electrical TypeBand MountPelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. Most sign-bracs are available with a cable, band, or tenon mount clamp kit.
Astro Sign-Brac, Stellar Band Mount Top & Bottom Attachment for Internally Illuminated Signs
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, 84”, 96”, or 114”.
AS-0129 - - - -
Tube Length
23=23” Tube37=37” Tube46=46” Tube58=58” Tube74=74” Tube
BandLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
ClampScrew
Blank=Galv SS=Stainless
AS-3004Clamp Kit
Page T6-13www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs. The sign bracket for rigid structures is available with 8” or 16” sign bar length
Sign Bracket Assy for Rigid StructuresStellar Series
Sign Bracket Assy, Stellar Cable Mount For Rigid Structuresw/ 24” Alum Tube
AS-0661 - - - -
Sign BarLength
08=8” w/ Holes 6” CTC16”=w/ Holes 9-3/4” CTC
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Hole CTC
AS-3009Clamp Kit
Sign Bar
Cable
Blank=Galv SS=Stainless
Page T6-14 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Galaxy T-Spar Sign Bracket
Pelco’s Galaxy T-Spar Sign Bracket was designed to work with a 2” square perforated tube. The single cable plate allows for an easy installation and the tube saddle allows multi-directional adjustability. The perforated tube is sold separate.
Perforated Tube, 2” x 12 Ga Steel, Galv
SE-4191 - - Length Coating
72”=6’ Tube GLV=GalvanizedP_ _=Paint
Shown with tube.Sold separately.
Note: 1. All assemblies are supplied standard with stainless fasteners. Stainless upgrade shall include stainless steel cable. 2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Note:Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
Galaxy T-Spar Assy, Cable Mount
AB-3056 - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Cable
Blank=Galv SS=Stainless
Page T6-15www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Mast Arm Sign Bracket
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
AB-0160Cable Mini-Brac
SE-5123Hardware Kit
SE-5148Single PointSign Hanger
Sign Hanger Assy, Free-SwingingTri-Stud, Stainless BushingsCable Mini-Brac Mount, Alum
Note:Cable Length: 45”, 62”, or 84”.
SE-5146 - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
AB-0121Band Mini-Brac
SE-5123Hardware Kit
SE-5070Single PointSign Hanger
Sign Hanger Assy, Free-SwingingTri-Stud, Stainless BushingsBand Mini-Brac Mount, Alum
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, or 84”.
SE-5015 - - -
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized pins and clamp screw or cable. Stainless upgrade shall include stainless hardware, pins, and clamp screw or cable.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Page T6-16 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Mast Arm Sign Bracket
Note:Cable Length: 45”, 62”, or 84”.
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
Note:Band Length: 29”, 36”, 42”, 48”, 56”, 72”, or 84”.
CTC
*See Chart
BandLength
See Note
AB-0160Mini-Brac
SE-0902Sign Hanger
SE-0547Angle
SE-0903Sign Hanger
SIGNS 3’-6” to 9’-0” LONG
SIGNLENGTH
S2’0”2’2”2’6”3’0”3’6”4’0”4’6”5’0”5’6”6’0”6’6”6’10”7’0”7’6”8’0”8’6”9’0”9’6”10’0”
ANGLELENGTH
T20”22”26”32”38”44”50”56”62”68”74”78”80”86”92”98”104”110”116”
*CTC A
18” 20” 24” 30” 36” 42” 48” 54” 60” 66” 72” 76” 78” 84” 90” 96” 102” 108” 114”
B6”
6.7”8”10”12”14”16”18”20”22”24”
25.3”26”28”30”32”34”36”38”
BRACKETD
12”14”14”20”24”28”32”36”40”44”48”50”52”56”60”68”68”72”76”
C3”4”6”6”7”8”9”10”11”12”13”14”14”15”16”17”18”19”20”
B
D
B
T
3”
2”
SIGNANGLE
BRACKET
A=*CTC
C
S= Sign Length
B
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized pins and clamp screw or cable. Stainless upgrade shall include stainless hardware, pins, and clamp screw or cable.
2. See Reference Section for clamp kit pole diameters. 3. See Reference Section for available paint colors.
Sign Hanger Assy, Free-Swinging w/ Band Mini-Brac for Overhead Street Name Sign
SE-5128 - - - - Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
Sign Hanger Assy, Free-Swinging w/ Cable Mini-Brac for Overhead Street Name Signs
SE-5188 - - - -CTC
*See Chart
CableLength
See Note
Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
AB-0121Mini-Brac
SE-0903Sign Hanger
SE-0902Sign Hanger
SE-0547Angle
Page T6-17www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Span Wire Sign Hanger Assemblies
SE-0338Span WireClamp
SE-5122Hardware Kit
SE-0338Span WireClamp
SE-5122Hardware Kit
SE-0338Span WireClamp
SE-5122Hardware Kit
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
Span Wire Sign Hanger, 16” CTC, Adjustable with Tether, Alum
SE-5116 - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
Span Wire Sign Hanger, 16” CTC, Adjustable with Stabilizer Bar, Alum
SE-5114 - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
Span Wire Sign Hanger, Double, 16” CTC, Adjustable with Tether, Alum
SE-5112 - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized hardware on span wire clamps. Stainless upgrade shall include stainless steel hardware and pins.
2. See Reference Section for available paint colors.
Page T6-18 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Sign Hanger Assy, Free-Swingingw/ Span Wire Clamp for Overhead Street Name Sign
SE-5219 - - - - - CTC
*See Chart
SE-0321Span WireClamp
SE-0547Angle
SIGNS 3’-6” to 9’-0” LONG
SIGNLENGTH
S2’0”2’2”2’6”3’0”3’6”4’0”4’6”5’0”5’6”6’0”6’6”6’10”7’0”7’6”8’0”8’6”9’0”9’6”10’0”
ANGLELENGTH
T20”22”26”32”38”44”50”56”62”68”74”78”80”86”92”98”104”110”116”
*CTC A
18” 20” 24” 30” 36” 42” 48” 54” 60” 66” 72” 76” 78” 84” 90” 96” 102” 108” 114”
B6”
6.7”8”10”12”14”16”18”20”22”24”
25.3”26”28”30”32”34”36”38”
BRACKETD
12”14”14”20”24”28”32”36”40”44”48”50”52”56”60”68”68”72”76”
C3”4”6”6”7”8”9”10”11”12”13”14”14”15”16”17”18”19”20”
B
D
B
T
3”
2”
SIGNANGLE
BRACKET
A=*CTC
C
S= Sign Length
B
Span Wire Sign Hanger Assemblies
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
Blank=No Extender11=11” Extenders
Extender Bushing
Blank=None SS=Stainless Bushing
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized hardware on span wire clamps. Stainless upgrade shall include stainless steel hardware and pins.
2. See Reference Section for available paint colors.
SE-0507Extender
Page T6-19www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Sign Hanger Assy, Free-SwingingSpan Wire Mount, Tri-Stud, Alum
Note:Assembly shown with extenders.
SE-5214 - - - -Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
Blank=No Extender11=11” Extenders
Extender Bushing
Blank=None SS=Stainless Bushing
SE-5123Hardware Kit
SE-0321Span Wire Clamp
Span Wire Sign Hanger Assemblies
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized hardware on span wire clamps. Stainless upgrade shall include stainless steel hardware and pins.
2. See Reference Section for available paint colors.
Page T6-20 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
SE-321290o Span wire Clamp
SE-3213Serrated Span Wire Clamp
18”
14” CTC
6” CTC
Span Wire Sign Hanger Assemblies
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
Span Wire Sign Hanger, 6” & 14” CTC Serrated Span Wire Clamp, Alum
SE-5115 - -Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
Span Wire Sign Hanger, 6” & 14” CTC 90o Span Wire Clamp, Adjustable, Alum
SE-5111 - - Coating
PNC=Process No ColorP_ _=Paint
Stainless Upgrade
Blank=Galv SS=Stainless
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized hardware on span wire clamps. Stainless upgrade shall include stainless steel hardware and pins.
2. See Reference Section for available paint colors.
Page T6-21www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
SE-0338Span WireClamp
Sign Hanger Assy, Iron Span Wire Clamp,Top & Bottom Mount w/ Tether, Alum
SE-0338Span WireClamp
SE-5043Span WireHanger
Sign Hanger Assy, Iron Span Wire Clamp, Alum
SE-5206Sign Hanger Assy
CTC
Span Wire Sign Hanger Assemblies
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
SE-5190 - - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
CTC
See Chart CTC SIGN11” 16”13” 18”19” 24”25” 30”31” 36”37” 42”
SE-5189 - - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
CTC
See Chart CTC SIGN11” 16”13” 18”19” 24”25” 30”31” 36”37” 42”
CTC SIGN11” 16”13” 18”19” 24”25” 30”31” 36”37” 42”
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized hardware on span wire clamps. Stainless upgrade shall include stainless steel hardware and pins.
2. See Reference Section for available paint colors.
Sign Hanger Assy, Adjustable, Iron Span Wire Clamp, Alum
SE-5191 - - - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
CTC
See Chart
Tether Assy
Blank=None T=Tether
SE-0338Span WireClamp
SE-5046Span WireHanger
Page T6-22 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
SE-0338Span WireClamp
AB-0502Sign Clamp
Span Wire Sign Hanger Assy, Free-Swinging Iron Span Wire Clamp, Tether & Sign Clamps, Alum
Span Wire Sign Hanger Assemblies
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
SE-5098 - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized hardware on span wire clamps. Stainless upgrade shall include stainless steel hardware and pins.
2. See Reference Section for available paint colors.
Page T6-23www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Free-Swinging Sign Hanger, 90o Span Wire Clamp, 16” CTC, Alum
Free-Swinging Sign Hanger, Serrated Span Wire Clamp, Adjustable, 16-1/2” CTC, Alum
Free-Swinging Sign Hanger, 90o Span Wire Clamp, 7-Hole, Alum
Free-Swinging Sign Hanger, 90o Span Wire Clamp, Extender, Alum
SE-3212Span Wire Clamp
SE-5122Hardware Kit
SE-3213Span WireClamp
SE-3212Span WireClamp
SE-3212Span WireClamp
Span Wire Sign Hanger Assemblies
Pelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
SE-5117 - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
SE-5169 - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
SE-5167 - - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Stainless Upgrade
Blank=Galv SS=Stainless
SE-5168 - - -Coating
PNC=Process No ColorP_ _=Paint
CTC
See Chart
Stainless Upgrade
Blank=Galv SS=Stainless
Note: 1. All assemblies are supplied standard with stainless steel slotted washers and fasteners with galvanized hardware on span wire clamps. Stainless upgrade shall include stainless steel hardware and pins.
2. See Reference Section for available paint colors.
CTC EXTENDER15” 16”21” 22”33” 34”
Page T6-24 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Sign Mount Assemblies
Note: 1. All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors. 3. See Section T16 for additional sign mounting assemblies.
Pelco manufactures a variety of sign brackets in both rigid and free-swinging mounts for flat and internally illuminated signs. Additional sign mounting options can be found in Section T16.
Adjustable Sign Mount Assy, Mast Arm, Alum
SH-0112 - -
Zee BarCTC
24=24”30=30”36=36”42=42”
Blank=None
Coating
PNC=Process No ColorP_ _=Paint
CTC
Rear View
Page T6-25www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Sign Accessories
Pelco’s safety cable assemblies are available for span wire, Astro-Brac, and sign hanger assemblies.
Safety Cable for Sign Hangers, Stainless
SH-1867 - - SS
CableLength
24=24”48=48”72=72”
100=100”120=120”
Note: 1. All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors.
Safety Cable for Span Wire
SE-3294 - -
CableLength
84=84”96=96”
110=110”
Cable
Blank=Galv SS=Stainless
Safety Cable for Astro-Brac
AB-0503 - -
CableLength
84=84”96=96”
110=110”
Cable
Blank=Galv SS=Stainless
Page T6-26 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Sign Accessories
Accessories for sign mountings such as hangers, extenders, and tethers are available in a variety of configurations.
Note: 1. All assemblies are supplied standard with stainless steel slotted washer and fasteners. 2. See Reference Section for available paint colors.
SE-5123Hardware Kit
Hanger Assy, Extender Connector for 1/2” Slot, w/ 1-1/4” Bolts, Alum
SE-5037 - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Hanger Assy, Extender Connector for 3/4” Slot, w/ 1-1/4” Bolts, Alum
SE-5197 - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Hanger & Body Assy for 1/2” Slot, Tri-Stud, Alum
SE-5036 - -Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Extender Assy for 1/2” Slot, w/ Extender Connector & Extender, Alum
SE-5180 - - -
Extender Length
11=11”19=19”40=40”72=72”
Coating
PNC=Process No ColorP_ _=Paint
Bushing
Blank=None SS=Stainless Bushing
Page T6-27www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Sign Accessories
Accessories for sign mountings such as hangers, extenders, and tethers are available in a variety of configurations.
Extender, Alumw/ 5/16”-18 x 1-1/4” Bolts
SE-5181 - - PNC
Extender Length
06=6”11=11”19=19”24=24”40=40”72=72”
Note: 1. All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors.
Extender Assy w/ 11” Extenders, Alumw/ 5/16”-18 x 1” & 1-1/2” Bolts
SE-5069 - Coating
PNC=Process No ColorP_ _=Paint
Extender Assy w/ Tether, Alumw/ 5/16”-18 x 1-1/2” Bolts
SE-5051 - - PNC
Extender Length
06=6”11=11”19=19”24=24”40=40”72=72”
SE-2509Tether Kit
Page T6-28 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
SIG
N M
OU
NTI
NG
S
10/11/17
Sign Accessories
Accessories for sign mountings such as hangers, extenders and tethers are available in a variety of configurations.
Tether Plate Assembly, Alumw/ 5/16”-18 x 2-1/4” Bolts
SE-5039 - Coating
PNC=Process No ColorP_ _=Paint
Note: 1. All assemblies are supplied standard with stainless fasteners. 2. See Reference Section for available paint colors.
Tether Plate Assembly, Alumw/ 5/16”-18 x 1-1/2” Bolts
SE-2509 - Coating
PNC=Process No ColorP_ _=Paint
Tether Plate Assembly, Alumw/ Stabilizer Bars & 5/16”-18 x 1-3/4” Bolts
SE-2512 - Coating
PNC=Process No ColorP_ _=Paint
Tether Plate Assembly, Alumw/ Stabilizer Bar, Block, & 5/16”-18 x 2” Bolts
SE-2519 - Coating
PNC=Process No ColorP_ _=Paint