assembly instructions-single-cage

© Copyright 2007 GRE, Inc. All Rights Reserved – Characters Used with Permission

Assembling the

Jung-L-Gym™ Premium SINGLE Cage…

Well hello there, and thank you for purchasing our

Jung-L-Gym™ Premium Single Cage! ☺ Although the entire line of Jung-L-Gym™ cages are simply the BEST “homes” in the world that a Sugar Glider can have – and every one is certified to be “Glider-Safe™” – they all have ONE major drawback…

The assembly instructions provided by the manufacturer are HORRIBLE! – and we wouldn’t wish them on our “worst enemy”! Check it out for yourself!…. When your cage arrives, just take a quick look at them and you’ll see exactly what we mean... ☺ ANYWAY, having said that, we take the trust you place in our company VERY seriously, so because the factory instructions were SO terrible – we took it upon ourselves to create the following set of new, detailed assembly instructions for you. They are jam-packed with lots of photos that will guide you step-by-step through everything – and make the entire process both fun and EASY!

Just so you can plan your time well… if you are all by yourself, it will probably take you about 35-45 minutes to assemble this cage. The only things you will need are: 1) a Phillips head screwdriver, 2) a 14mm wrench or socket, and 3) some fun music to listen to! Anyway, we hope you find the following instructions to be both helpful and time-saving! Follow along – and ENJOY! Your little fuzzbutt (or fuzzbutts) are going to LOVE you for this! ☺ NOTE: On the outside of your box, you will notice that it says “bird cage”. Not to worry. ☺ That is simply because there is no such thing as a large cage that is made specifically for Sugar Gliders – so all large “glider cages” are really bird cages. NEVER FEAR THOUGH!.. Our team of experts has spent years sorting through all the identical-looking “knockoffs” cages out there (and there are a LOT of them) to find you the ONE perfect cage that meets ALL a Sugar Glider’s very unique needs. You’re in great hands – so ENJOY!


Assembling the

Jung-L-Gym™ Premium SINGLE Cage…

Step 1: Assembling the Stand: 1) After you unpack the box, separate out all the hardware (ie nuts, bolts, screws, washers, etc..) You should have the following:

- 4 wheels - 2 cage latch assemblies - 10 small screws (for the cage

itself) - 4 long bolts - 9 short bolts - 14 nuts

(you may have more than this as extras) Once you have gathered all the hardware as shown, separate out all 5 pieces of the stand frame.

2) Using the 8 SHORT bolts, attach the top two cross bars. Make sure the tabs on these bars are on the INSIDE. Then, using the 4 LONG bolts, attach the bottom shelf.

3) Push on the 4 wheels and the stand is complete…


Step 2: Assembling the Cage: NOTE: The only tool you will need for the remainder of this assembly is a Phillips head screwdriver (power or manual). 1) Using two DOME topped screws, attach the left side of the cage to the front. Make sure the side panel is positioned so that the track at the bottom for the “poo tray” is facing INWARD.

2) Then, attach the right side panel with two more DOME topped screws – again making sure the track on the bottom of this panel is facing INWARD.

3) Using four more DOME topped screws, attach the back panel of the cage.


4) Now attach the top panel using the remaining 4 DOME topped screws. Remember, you might have extra screws left over. This is fine ☺…

5) Using two of the short FLAT topped screws, attach the left (receiving) side of both the door latches.

6) Now, attach the right side of each latch;

pressing it up against the left side and securing it with two more FLAT topped screws. Make sure to open and close the latch a couple times to make sure it works properly – and adjust the screws on the right side of each latch if needed.


7) Now that the cage is assembled, place it on the stand so that the tabs on the stand hold the cage securely in place….

8) Slide in the floor and the “poo tray”… and

YOU ARE DONE!

**A COUPLE IMPORTANT NOTES**

1. Do NOT use the wooden perches or plastic food & water dishes. Just throw them out. Gliders will pee on them, and they will eventually start to smell. If you try to use the food & water dishes (which usually break in shipping anyway), you will find at least half of your food wasted on the floor every morning. Instead, build them a simple “dining room” – according to the instructions found in the free “Feeding” report on the front page of our website ☺. 2. Gliders are ingenious little “escape artists”. In order to prevent the floor from sliding out, just secure it to the back of the cage with a plastic zip tie ☺

assembly instructions-single-cage

Documents