1

A

B

C

D

E

F

G

H

Dimensions shown in mmunless otherwise specified

Metric

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

vestas.com

AA

BB

EE

(3495)

(2705)

4522

4470

BCD 4078 1

210

170

620

235

9

7

Pos Item no Pcs Item description Additional information Kg/Pcs

1 152218 2 HEX BOLT M20X 90 8.8 TZN ISO 4017 0.3

2 157020 4 WASHER M20 HV300 TZN ISO 7090 0

3 157719 2 LOCK NUT M20 8.0 TZN DIN 985 ISO 10511 0.1

4 786734 1 EARTHING KIT,SWG BASEMENT ASSEMBLY 49.8

5 75942521 6 ADJUSTING LEG EMBEDM. L=250 ASSEMBLY 10.3

6 75942684 2 FISHPLATE Ø4078/Ø3722 S235JR EN 10025-2 25.1

7 75943184 22 ADJUSMENT FOOT, EMBEDMENT S235JR/PA66 10

8 75943818 1 ANCHOR EMBED V112 HH119 ASSEMBLY 15009

9 78600402 216 FOAM PIPE Ø35X52X200 POLYETHYLEN 1

10 78600432 1 TYPE PLATE FOR ANCHOR CAGE ANSI 304 0Item no. Mass (kg) Certificate Format Status Revised by Created date Created by

75920529 15072 - A1 JONXU 2011-11-28 IRJYAMaterial / Specification Scale Change no. PDM ver. Reviewed date Reviewed by

- 1:20 328187 2.1- Proj. Item description

Table_Version=1 ANCHOR EMBED V112 HH119-Pro/E

Replaces Drawing no. Ver. Sheet

- 75920529 2 1 of 1WARNING: PROPRIETARY AND CONFIDENTIAL INFORMATION.This document and the Information set forth herein are confidential and proprietary to Vestas Wind Systems A/S. It contains trade secrets, and independent economic value, actualor potential, may be derived from the document/Information not being generally known. In consideration of you receiving this document you agree (I) to keep the Information secret(II) only to use the Information for the purpose specifically agreed with Vestas (III) not to disclose directly or indirectly any part of the Information to any third party and(IV) not to make copies or reproductions thereof by whatsoever means or undertake any qualitative or quantitative analysis, reverse engineering or replication.

All PVC drain pipes and elbows Ø160 and Ø50are to be bundled and secured during transport. Item 108836 and 108878 to be packed andbundled together with the pipes.

Item 767806 and 196000 16 pcs. from 786721has to be packed in the samebox, sealed for transport. To be securedduring transport to site.

Item 78600402 216 pcs. To be packed and secured during transport.Used for protection of thread on Anchor bolts during concreting.

Pos.4 not shown on drawingAll dimensions without tolerances ±5

Item 75942521 6 pcs. to be mountedon site acc.to PWI 0009-0451.To be packed for transport.To be secured during transport.

Item 75943184, 22 pcs. to be packedand sealed for transport. To be securedduring transport.

A-A

Detail D

B-B

Detail C

1:50

Detail C1:5

Item No. + rev. No,and MSI-No.To be stamped into Type Plate.HIGH IMPORTANCE:Type Plate to be remountedafter removal of Template Flange and Ingot.

Detail D 1:10Template flange to be assembled with fishplate as shown. Removed after concrete

E-E1:5

1:5

VESTAS PROPRIETARY NOTICE: This document contains valuable confidential information of Vestas Wind Systems A/S. It is protected by copyright law as an unpublished work. Vestas reserves all patent, copyright, trade secret, and other proprietary rights to it. The information in this document may not be used, reproduced, or disclosed except if and to the extent rights are expressly granted by Vestas in writing and subject to applicable conditions. Vestas disclaims all warranties except as expressly granted by written agreement and is not responsible for unauthorized uses, for which it may pursue legal remedies against responsible parties.