arduino-uno bluetooth development...

OUR PRIME CUSTOMERS

AdvanceTech India Pvt. Ltd.www.atechindia.com

ARDUINO-UNO BLUETOOTH DEVELOPMENT BOARD

§ Driver To Drive Dc Motor For Driving Robots Or Conveyer

§ DC Current for 3.3V Pin 50 mA

§ SRAM 2 KB

§ Simply connect it to a computer with a usb cable or power it with a ac-to-dc adapter Or battery to get started. It has bluetooth on board so this board can be Applied to android applications and wireless applications

§ Microcontroller ATmega328

MOTOR DRIVER

§ Belt Or To Operate A Relay It has A On Board DC .

INTRODUCTIONS

§ DC Current per I/O Pin40 Ma

§ Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader

§ EEPROM 1 KB

§ Analog Input Pins 6

§ Operating Voltage 5V,2A§ Digital I/O Pins 14 (of which 6 provide PWM output)

§ Clock Speed 16 MHz

COMMUNICATION

§ The Arduino Uno has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The Atmega 328 provides UART TTL (5V) serial communication, which is available on digital pins 0 (RX) and 1 (TX).

§ On board Bluetooth(7,8)PINS is used to have wireless communication .for ANDROID APPLICATIONS,AND WIRELESS MATLAB AND LABVIEW CONTROL.

§ Motor Driver To Drive Dc Motor For Driving Robots Or Conveyer

§ Communication U S B 2.0 ,BLUETOOTH

§ The arduino -bluetooth is a microcontroller board based on The atmega328.it has 14 digital input/output pins (of which 6 can Be used as pwm outputs), 6 analog inputs, a 16 Mhz ceramic resonator, And a reset button. It contains everything needed to support the microcontroller;

SPECIFICATION

8051 Daughter Board Pic Daughter Board AVR Daughter Board

Aurdino Board

ADC/DAC Combined Interface Stepper Motor Interface

DC Interface Relay Buzzer Interface

LED Interface

4 X 4 Hex Keypad Interface

Touch Sensor Interface Temprature Sensor Interface Ultrasonic Sensor Interface

Proximity Sensor Interface Accelerometer Sensor InterfaceHumidity Sensor Interface

ATMEGA16 DB

ATMEGA128 DB

LPC2148 DB

ADC Interface

ARM COTEX-M3-LPC1768

128 x64Graphic Lcd Interface

OUR PRIME CUSTOMERS


Universal Embedded Package

OUR PRIME CUSTOMERS


ARDUINO MEGA 2560

§ Flash Memory 256 KB of which 8 KB used by bootloader

§ Clock Speed 1 6 MHz

§ Operating Voltage 5V

§ SRAM 8KB

§ The Arduino Mega 2560 is a microcontroller board based on the ATmega2560It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

§ DC Current per I/O Pin 40 mA

§ Microcontroller Atmega2560

INTRODUCTIONS

§ DC Current for 3.3V Pin 50 mA

§ Analog Input Pins 16§ Digital I/O Pins 54 (of which 15 provide PWM output)

SPECIFICATION

§ EEPROM 4 KB

OUR PRIME CUSTOMERS


Arduino -Uno Board

§ Digital I/O Pins- 2 box header (14 pins of which 6 provide PWM output

Key Feature§ U S B o n b o a r d P r o g r a m m in g s u p p o rt§ Hardware compatibility to universal micro controller board

Specications

§ SRAM - 2 KB (ATmega328), EEPROM- 1 KB (ATmega328)§ Microcontroller- ATmega328, Flash Memory- 32 KB

§ Clock Speed- 16 MHz, Operating Voltage- 5V

§ Analog Input Pins- On 1 box header (6 pins)§ Programming- USB Programming & SPI programming header

§ Compatible - Universal board & all interfacing modules we have

§ Project development oriented

§ Reset - On board programming

OUR PRIME CUSTOMERS


ARDUINO WITH XBEE

Introductions§ The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6

can and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. On board xbee helps this board for wireless networking applications.

Specications§ Microcontroller ATmega328§ Operating Voltage 5V

§ Analog Input Pins 6

Motor Driver

§ On board Bluetooth(7,8)PINS is used to have wireless communication .for ANDROID APPLICATIONS,AND WIRELESS MATLAB AND LABVIEW CONTROL The Arduino Uno has a number of facilities for communicating with a computer another Arduino, or other microcontrollers. The ATmega328 provides UART TTL (5V) serial communication, which is available on digital pins 0 (RX) and 1 (TX).

§ DC Current per I/O Pin 40 mA

§ EEPROM 1KB§ Clock Speed 16 MHZ

§ It has A On Board DC Motor Driver To Drive Dc Motor For Driving Robots Or Conveyer Belt Or To Operate A Relay.

§ Digital I/O Pins 14 (of which 6 provide PWM output)

§ SRAM 2 KB

§ Communication USB2.0,XBEE

§ DC Current for 3.3V Pin 50 mA§ Flash Memory 32 K B (ATmega328) of which 0.5 KB used by bootloader

Communication

OUR PRIME CUSTOMERS


ARM 7 Development Board

Introductions§ Board based on ARM LPC 2148.

§ Inbuilt: -0 -60MHz

§ This board is useful for Students/Faculty and Industrial professional.

§ USB programming & other interfaces

§ Processor – ARM 7 LPC 2148§ Crystal OSC-12MHz

§ Display: - 16 X 2 LCD,§ 4 seven segment, 8 SMD-Led§ I/P: - 8 I/P DIP Switch§ PS2 Keyboard§ Micro SD Card

§ This board is very small & portable& easy to operate

§ On Board X-bee device§ On board USB programing facility§ On board R TC/EEPRom

§ On board LM35 temp sensor

§ On boards buzzer§ On board Relay 6v

Specications

6. Interfacing EPROM and interrupt.

10. Interfacing stepper motor and temperature sensor.

2. Interfacing ADC and DAC.

Experiments

§ On board power supply

1. Study of ARM evaluation system

5. Interfacing keyboard and LCD.

7. Mailbox.

9. Flashing of LEDS.

11. Implementing zigbee protocol with ARM.

8. Interrupt performance characteristics of ARM and FPGA.

3. Interfacing LED and PWM.

§ Optional stepper motor Interface§ Optional hex Keyboard (4x4) connector

§ I/O expansion – connector

4. Interfacing real time clock and serial port.

OUR PRIME CUSTOMERS


ARM COTEX-M3-LPC1768

§ 8051 Daughter BoardOptional Daughter Boards

§ ARM 7 Daughter Board (2148,2138)§ ARDUINO Daughter Board

§ PIC Daughter Board (PIC16F877,PIC18F452)§ AVR Daughter Board (ATMEGA 8515 , 8,16,32)

§ On board crystal oscillator for internal RTC.

Features For Lpc 1768

§ 6-output general purpose PWM

§ Four push to ON Input switches.

§ Two SSP controllers§ Two CAN channels

§ SPI interface§ Three IC interfaces

§ ARM Core with 64 KB of SRAM and 512 KB Flash.

§ 2 – input plus 2 – output IS interface

§ 10 – bit DAC

§ Four general purpose timers§ Ultra-low power RTC with separate battery supply

§ Backward compatible with Universal microcontroller development board.

§ ARM COTEX-M3 (LPC1768) processor at 100 MHZ.

§ 8 – channel 12 – bit ADC

§ Four UART's

§ Motor control, Quadrature Encoder interface and

§ 8-channel general purpose DMA controller

Specication for Mother Board

§ 16X2 LCD display

§ Four multplexed seven segments§ EEPROM with 4K memory or more

§ 128X64Graphical LCD display

§ EEPROM with 4K memory or more§ RTC with 32 KHz crystal with battery backup.§ On Board USB Interface§ Stepper motor driver circuit.§ input from DIP switches.§ 8 output from LED.§ 128X64Graphical LCD display§ Rs232 for serial Communication§ DAC 8- Bit§ ADC 8- Bit & 8 Channel.

Introductions§ ARM 1768 development board for rapid prototyping

§ On board regulator for 3.3 V and dc socket for adaptor·

§ On board connector for JTAG debugger interface.

§ LPC 1768 is developed with an extensive set of Peripheral that allows for broad way of Design & Application.

OUR PRIME CUSTOMERS


Microcontroller 8051 Trainer Kit 6 Application

§ Programming & interfacing of motor control.

§ Programming and interfacing of ADC.

§ Programming and interfacing of eeprom & rtc –i2c protocol.§ Programming and interfacing of DAC.

§ Programming & interfacing of relay buzzer control.

§ Test switch and 4x4 hex keypad.

Experiment

§ 8 O/Ps available on LED's.

§ Win Xp based driver software for programming in C

§ On board buzzer.

§ Programming & Interfacing of different type of display ,

§ External reset switch.

§ led , lcd & seven segment.

§ Programming and interfacing of input devices- dip switch ,

§ 4 multiplexed 7- segment displays.

§ 8 I/Ps from DIP switches.

§ Programming and interfacing of serial communication (Rs-232).

§ Usb Programming Facility,rs232 Communication

§ Power Control Switch, Interfere With Capacity Of 4k.§ Project Oriented, Windows Compatible§ 8051 Micro controller with ISP features.

§ Complete Board 5v Operated, Easy Plug & Play Connectors.

§ In Circuit programming and serial communication through PC.§ E2PROM with 1² C interfere with capacity of 4K.§ RTC with battery backup.§ One +5V relays with isolated O/Ps.§ All interrupts available on header.

Technical Specication

§ 16 X 2 LCD

OUR PRIME CUSTOMERS


Raspberry Pi

§ Management: manage more devices from your Pi.

§ 700MHz Broadcom BCM2835 CPU / 512 MB SDRAM @ 400MHz / 10/100.

§ GPIO header expanded (40 pins vs. 26).

§ More energy efciency (less power required) / Improved power.

Technical Specication

§ Ethernet RJ45 on-board network.

§ New 4-pole connector replaces the existing analogue and composite video port on the Model B.

§ Full size HDMI / 4 USB ports / Micro SD slot.

arduino-uno bluetooth development...

Documents