arcat€¦ · web viewrecord minutes of the conference and provide copies to all parties present....

SECTION 10 14 63LARGE FORMAT LED DISPLAY AND MESSAGING BOARDS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2015 - 2015 ARCAT, Inc. - All rights reserved

1 GENERAL

1.1 SECTION INCLUDES

1.1.1 Flat Panelized Displays.

1.1.2 Curved Panelized Displays.

1.1.3 Wrapped Panelized Displays.

1.2 RELATED SECTIONS

1.2.1 Section 05 50 00 - Metal Fabrications.

1.2.2 Section 26 50 00 - Lighting.

1.2.3 Division 16 - Electrical.

1.3 REFERENCES

1.3.1 National Electrical Manufacturers Association (NEMA).

1.3.2 ANSI/InfoComm 10:2013 - Audiovisual Systems Performance Verification.

1.3.3 ANSI/UL 879 - Electric Sign Components.

1.3.4 CAN/CSA-C22.2 No. 27 - Portable and Stationary Electric Signs and Displays.

1.4 DESIGN / PERFORMANCE REQUIREMENTS

1.4.1 Large format display and messaging boards and other electrical components shall be certified for use in United States and Canada by Underwriters Laboratories (UL) and shall bear UL label. System complies with ANSI/UL 879 and CAN/CSA-C22.2 No. 27.

1.5 SUBMITTALS

1.5.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.5.2 Product Data: Provide manufacturer's data sheets on each product to be used, including:1.5.2.1 Preparation instructions and recommendations.1.5.2.2 Storage and handling requirements and recommendations.1.5.2.3 Installation methods.1.5.2.4 Operation and maintenance instructions.

1.5.3 Shop Drawings: Provide shop drawings indicating details of construction, fabrication, and installation of signage systems including but not limited to wiring diagrams, cable routing, interconnections between equipment, anchorage details, and relationship with supporting

10 14 63-1

structure and adjacent construction.

1.5.4 Custom Mounting: Coordinate with support structure specified in Section 05 50 00 - Metal Fabrications and as indicated on the Drawings for custom mounting and support of the large format display and messaging boards system(s) specified.

1.5.5 LEED Submittals: Provide documentation of how the requirements of Credit will be met:1.5.5.1 List of proposed materials with recycled content. Indicate post-consumer

recycled content and pre-consumer recycled content for each product having recycled content.

1.5.5.2 Product data and certification letter indicating percentages by weight of post-consumer and pre-consumer recycled content for products having recycled content.

1.5.6 Manufacturer's Certificates: Certify products meet or exceed specified requirements.

1.6 CLOSEOUT SUBMITTALS

1.6.1 Warranty Documentation. Provide warranty documentation, with start date(s) and service contact(s).

1.6.2 Record Documentation: Provide as-built schematics of the system design showing the quantity, type and location of components, cabling and accessories.

1.6.3 System Reports:1.6.3.1 Report an inventory of electronic system components, including model number,

serial number, and firmware version.1.6.3.2 Report the verified quantity of panels installed per local control zone.1.6.3.3 Report all system settings.1.6.3.4 Report testing and commissioning data.

1.6.4 System Settings Backup: Provide an electronic file of all system settings.

1.6.5 Security Items:1.6.5.1 Provide one set of keys for each locked equipment enclosure.1.6.5.2 Provide passwords to access control functions for hardware and software user

interfaces.

1.7 QUALITY ASSURANCE

1.7.1 Manufacturer Qualifications: Minimum two years documented experience in work of this Section.

1.7.2 Authorized Manufacturer Representative: System shall be configured and commissioned by an authorized manufacturer representative.

1.7.3 Installer Qualifications: Minimum two years documented experience in work of this Section.

1.7.4 Mock-Up: Provide a mock-up for evaluation of surface mounting system(s) and system operation.1.7.4.1 Size: Approximately 4 feet by 4 feet (1.2 m by 1.2 m).1.7.4.2 Include structural support1.7.4.3 Include all mounting systems, electronics and power supplies to demonstrate the

system.1.7.4.4 Obtain Architect's acceptance of mock-up before beginning continuing activities

of this Section.1.7.4.5 Approved mockup may remain as part of the Work.

10 14 63-2

1.8 PRE-INSTALLATION MEETINGS

1.8.1 Convene minimum two weeks prior to commencing Work of this section.

1.8.2 Review installation procedures and coordination required with related Work.

1.8.3 Inspect and make notes of job conditions prior to installation:1.8.3.1 Record minutes of the conference and provide copies to all parties present.1.8.3.2 Identify all outstanding issues in writing designating the responsible party for

follow-up action and the timetable for completion.1.8.3.3 Installation shall not begin until all outstanding issues are resolved to the

satisfaction of the Architect.

1.9 DELIVERY, STORAGE, AND HANDLING

1.9.1 Deliver, store and handle products in strict compliance with manufacturer's instructions and recommendations and industry standards.

1.9.2 Store products in manufacturer's unopened packaging until ready for installation.

1.9.3 Store materials within absolute limits for temperature and humidity recommended by manufacturer. Protect from damage

1.10 SEQUENCING

1.10.1 Ensure that information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.

1.11 PROJECT CONDITIONS

1.11.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.11.2 Products shall not be installed until painting and other finish work is complete.

1.12 WARRANTY

1.12.1 Manufacturer's standard limited warranty against defects materials and workmanship when installed and operated in accordance with the product specifications and manuals.

1.12.2 Warranty Period: Provided display with the manufacturer's standard 6 Year warranty, including zero LED failure and zero component failure including all hardware and software.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: NanoLumens, which is located at: 4900 Avalon Ridge Pkwy.; Norcross, GA 30071; Toll Free Tel: 888-771-NANO (6266); Tel: 678-421-9694 ; Email:request info ([email protected]); Web:www.nanolumens.com

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 FLAT PANELIZED LED DISPLAYS

10 14 63-3

2.2.1 Description: NanoLumens NanoSlim displays are made up of modular Nixel panels populated on a bespoke fabricated metal frame approximately 3.125 inches deep with sides and rear enclosure that when combined in an LED display array are contained to complete the display. Nixels are mounted magnetically to the frames to permit full access to all components within display from the viewable front side. NanoLumens displays are fully front-installable and front-serviceable unless called for otherwise within the design.

2.2.2 Layout and Configuration: As indicated on Drawings.

2.2.3 System Type: NanoSlim 3U display for indoor application.2.2.3.1 Panel Mounting System:

2.2.3.1.1 Custom wall mount as indicated on Drawings.2.2.3.1.2 Custom ceiling mount as indicated on Drawings.2.2.3.1.3 Custom self supported floor mount as indicated on Drawings.2.2.3.1.4 Custom hanging mount as indicated on Drawings.

2.2.3.2 3.8 mm Pixel Pitch, Large-Format, Panelized, LED Display.2.2.3.2.1 Display Type: NanoLumens, Universal Nixel.

2.2.3.2.1.1 Pixel Pitch: 3.8 mm2.2.3.2.1.2 Pixel Configuration: 3-in-1 SMD2.2.3.2.1.3 Pixel Density (per sf): 6,4002.2.3.2.1.4 Brightness: 1,400 nits max.2.2.3.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.2.3.2.1.6 Number of Colors: Greater than 16M2.2.3.2.1.7 Refresh Rate: 960 Hz (adjustable)2.2.3.2.1.8 Max BTU/hr per sf: 74 (full white)2.2.3.2.1.9 Weight: 6.0 lbs/sf2.2.3.2.1.10 Horizontal Viewing Angle: 170 degrees (+/- 85 off center)2.2.3.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.2.3.2.1.12 Source Compatibility: DVI or HDMI; S-Video, Composite, HD-SDI

by request only2.2.3.2.1.13 Data Connection: Shielded twisted pair CAT 5e/6e or fiber optic by

request2.2.3.2.1.14 Max Power Consumption: 54 watts per sf (full white)2.2.3.2.1.15 Working Voltage: 120 VAC/240 VAC @ 60Hz2.2.3.2.1.16 Service Access: Front; Rear by request2.2.3.2.1.17 Depth of Finished Display: Approximately 4.125 inches2.2.3.2.1.18 Panel Size: 6 inches H by 12 inches W (152.4 mm H by 304.8 mm

W)2.2.3.2.1.19 Panel Mounting to Substrate: Magnets with approximately 54 lbs

of magnetic force per panel.


2.2.4.1.1 Custom wall mount as indicated on Drawings.2.2.4.1.2 Custom ceiling mount as indicated on Drawings.2.2.4.1.3 Custom self-supported floor mount as indicated on Drawings.2.2.4.1.4 Custom hanging mount as indicated on Drawings.


2.2.4.2.1.1 Pixel Pitch: 4.7 mm2.2.4.2.1.2 Pixel Configuration: 3-in-1 SMD2.2.4.2.1.3 Pixel Density (per sf): 4,0962.2.4.2.1.4 Brightness: 1,600 nits max.2.2.4.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.2.4.2.1.6 Number of Colors: Greater than 16M2.2.4.2.1.7 Refresh Rate: 960 Hz (adjustable)

10 14 63-4

2.2.4.2.1.8 Max BTU/hr per sf: 30 (full white)2.2.4.2.1.9 Weight: 6.0 lbs/sf2.2.4.2.1.10 Horizontal Viewing Angle: 170 degrees (+/- 85 off center)2.2.4.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.2.4.2.1.12 Source Compatibility: DVI or HDMI; S-Video, Composite, HD-SDI















2.2.6.2 6.3 mm Pixel Pitch, Large-Format, Panelized, LED Display.

10 14 63-5

2.2.6.2.1 Display Type: NanoLumens, Universal Nixel.2.2.6.2.1.1 Pixel Pitch: 6.3 mm2.2.6.2.1.2 Pixel Configuration: 3-in-1 SMD2.2.6.2.1.3 Pixel Density (per sf): 2,3042.2.6.2.1.4 Brightness: 1,700 nits max.2.2.6.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.2.6.2.1.6 Number of Colors: Greater than 16M2.2.6.2.1.7 Refresh Rate: 960 Hz (adjustable)2.2.6.2.1.8 Max BTU/hr per sf: 32 (full white)2.2.6.2.1.9 Weight: 6.0 lbs/sf2.2.6.2.1.10 Horizontal Viewing Angle: 170 degrees (+/- 85 off center)2.2.6.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.2.6.2.1.12 Source Compatibility: DVI or HDMI; S-Video, Composite, HD-SDI













10 14 63-6

2.2.8 System Type: NanoSlim Engage 1.8FS display for indoor application.2.2.8.1 Panel Mounting System:


2.2.8.2 1.8 mm Pixel Pitch Large-Format, Panelized, LED Display.2.2.8.2.1 Display Type: NanoLumens NanoSlim Engage.

2.2.8.2.1.1 Pixel Pitch: 1.875 mm2.2.8.2.1.2 Pixel Configuration: 3-in-1 SMD2.2.8.2.1.3 Pixel Density (per sf): 26,4202.2.8.2.1.4 Brightness: 1,000 nits max.2.2.8.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.2.8.2.1.6 Number of Colors: Greater than 16M (24-bit)2.2.8.2.1.7 Refresh Rate: 960 Hz (adjustable)2.2.8.2.1.8 Max BTU/hr per sf: 94.9 (full white)2.2.8.2.1.9 Weight: 8.5 lbs/sf2.2.8.2.1.10 Horizontal Viewing Angle: 160 degrees (+/- 80 off center)2.2.8.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.2.8.2.1.12 Source Compatibility: DVI, HDMI, S-Video, Composite2.2.8.2.1.13 Data Connection: Shielded twisted pair CAT 5e/6e - Fiber optic2.2.8.2.1.14 Max Power Consumption: 69.1 watts per sf (full white)2.2.8.2.1.15 Working Voltage: 120 VAC/240 VAC @ 60Hz2.2.8.2.1.16 Service Access: Front2.2.8.2.1.17 Install: Front2.2.8.2.1.18 Depth of Finished Display: Approximately 3.93 inches2.2.8.2.1.19 Panel Size: (18.9 inches H by 18.9 inches W)2.2.8.2.1.20 Panel Mounting to Substrate: Magnets with approximately 54 lbs


2.2.9 System Type: NanoSlim Engage 1.8RS display for indoor application.2.2.9.1 Panel Mounting System:



2.2.9.2.1.1 Pixel Pitch: 1.875 mm2.2.9.2.1.2 Pixel Configuration: 3-in-1 SMD2.2.9.2.1.3 Pixel Density (per sf): 26,4202.2.9.2.1.4 Brightness: 1,000 nits max.2.2.9.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.2.9.2.1.6 Number of Colors: Greater than 16M (24-bit)2.2.9.2.1.7 Refresh Rate: 960 Hz (adjustable)2.2.9.2.1.8 Max BTU/hr per sf: 94.9 (full white)2.2.9.2.1.9 Weight: 8.5 lbs/sf2.2.9.2.1.10 Horizontal Viewing Angle: 160 degrees (+/- 80 off center)2.2.9.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.2.9.2.1.12 Source Compatibility: DVI, HDMI, S-Video, Composite2.2.9.2.1.13 Data Connection: Shielded twisted pair CAT 5e/6e - Fiber optic2.2.9.2.1.14 Max Power Consumption: 69.1 watts per sf (full white)2.2.9.2.1.15 Working Voltage: 120 VAC/240 VAC @ 60Hz2.2.9.2.1.16 Service Access: Rear2.2.9.2.1.17 Install: Rear2.2.9.2.1.18 Depth of Finished Display: Approximately 3.93 inches

10 14 63-7

2.2.9.2.1.19 Panel Size: (18.9 inches H by 18.9 inches W)

2.2.10 System Type: NanoSlim Engage 2.5FS display for indoor application.2.2.10.1 Panel Mounting System:



2.2.10.2.1.1 Pixel Pitch: 2.5 mm2.2.10.2.1.2 Pixel Configuration: 3-in-1 SMD2.2.10.2.1.3 Pixel Density (per sf): 14,6842.2.10.2.1.4 Brightness: 1,200 nits max.2.2.10.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.2.10.2.1.6 Number of Colors: Greater than 16M (24-bit)2.2.10.2.1.7 Refresh Rate: 960 Hz (adjustable)2.2.10.2.1.8 Max BTU/hr per sf: 79.2 (full white)2.2.10.2.1.9 Weight: 8.5 lbs/sf2.2.10.2.1.10 Horizontal Viewing Angle: 160 degrees (+/- 80 off center)2.2.10.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.2.10.2.1.12 Source Compatibility: DVI, HDMI, S-Video, Composite2.2.10.2.1.13 Data Connection: Shielded twisted pair CAT 5e/6e - Fiber optic2.2.10.2.1.14 Max Power Consumption: 57.7 watts per sf (full white)2.2.10.2.1.15 Working Voltage: 120 VAC/240 VAC @ 60Hz2.2.10.2.1.16 Service Access: (Front)2.2.10.2.1.17 Install: Front2.2.10.2.1.18 Depth of Finished Display: Approximately 3.93 inches2.2.10.2.1.19 Panel Size: (18.9 inches H by 18.9 inches W)2.2.10.2.1.20 Panel Mounting to Substrate: Magnets with approximately 54 lbs


2.2.11 System Type: NanoSlim Engage 2.5RS display for indoor application.2.2.11.1 Panel Mounting System:



2.2.11.2.1.1 Pixel Pitch: 2.5 mm2.2.11.2.1.2 Pixel Configuration: 3-in-1 SMD2.2.11.2.1.3 Pixel Density (per sf): 14,6842.2.11.2.1.4 Brightness: 1,200 nits max.2.2.11.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.2.11.2.1.6 Number of Colors: Greater than 16M (24-bit)2.2.11.2.1.7 Refresh Rate: 960 Hz (adjustable)2.2.11.2.1.8 Max BTU/hr per sf: 79.2 (full white)2.2.11.2.1.9 Weight: 8.5 lbs/sf2.2.11.2.1.10 Horizontal Viewing Angle: 160 degrees (+/- 80 off center)2.2.11.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.2.11.2.1.12 Source Compatibility: DVI, HDMI, S-Video, Composite2.2.11.2.1.13 Data Connection: Shielded twisted pair CAT 5e/6e - Fiber optic2.2.11.2.1.14 Max Power Consumption: 57.7 watts per sf (full white)2.2.11.2.1.15 Working Voltage: 120 VAC/240 VAC @ 60Hz2.2.11.2.1.16 Service Access: (Rear)

10 14 63-8

2.2.11.2.1.17 Install: Rear2.2.11.2.1.18 Depth of Finished Display: Approximately 3.93 inches2.2.11.2.1.19 Panel Size: (18.9 inches H by 18.9 inches W)

2.3 CURVED PANELIZED LED DISPLAY

2.3.1 Description: NanoLumens NanoCurve displays are made up of modular Nixel panels populated on a bespoke fabricated metal frame approximately 3.125 inches deep with sides and rear enclosure that when combined in an LED display array are contained to complete the display. Nixels are mounted magnetically to the frames to permit full access to all components within display from the viewable front side. NanoLumens displays are fully front-installable and front-serviceable unless called for otherwise within the design.


2.3.3 System Type: NanoCurve 3U display for indoor application.2.3.3.1 Panel Mounting System:







of magnetic force per panel.2.3.3.2.1.20 Minimum radius of curvature of display surface: 24 inches




2.3.4.2.1.1 Pixel Pitch: 4.7 mm

10 14 63-9

2.3.4.2.1.2 Pixel Configuration: 3-in-1 SMD2.3.4.2.1.3 Pixel Density (per sf): 4,0962.3.4.2.1.4 Brightness: 1,600 nits max.2.3.4.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.3.4.2.1.6 Number of Colors: Greater than 16M2.3.4.2.1.7 Refresh Rate: 960 Hz (adjustable)2.3.4.2.1.8 Max BTU/hr per sf: 30 (full white)2.3.4.2.1.9 Weight: 6.0 lbs/sf2.3.4.2.1.10 Horizontal Viewing Angle: 170 degrees (+/- 85 off center)2.3.4.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.3.4.2.1.12 Source Compatibility: DVI or HDMI; S-Video, Composite, HD-SDI




of magnetic force per panel.2.3.4.2.1.20 Minimum radius of curvature of display surface: 24 inches.









10 14 63-10














request

10 14 63-11

2.3.7.2.1.14 Max Power Consumption: 25 watts per sf (full white)2.3.7.2.1.15 Working Voltage: 120 VAC/240 VAC @ 60Hz2.3.7.2.1.16 Service Access: Front; Rear by request2.3.7.2.1.17 Depth of Finished Display: Approximately 4.125 inches2.3.7.2.1.18 Panel Size: 6 inches H by 12 inches W (152.4 mm H by 304.8 mm



2.4 WRAPPED PANELIZED LED DISPLAYS

2.4.1 Description: NanoLumens NanoWrap displays are made up of modular Nixel panels populated on a bespoke fabricated metal frame approximately 3.125 inches deep with sides and rear enclosure that when combined in an LED display array are contained to complete the display. Nixels are mounted magnetically to the frames to permit full access to all components within display from the viewable front side. NanoLumens displays are fully front-installable and front-serviceable unless called for otherwise within the design.


2.4.3 System Type: NanoWrap 3U display for indoor application.2.4.3.1 Panel Mounting System:







of magnetic force per panel.2.4.3.2.1.20 Minimum radius of curvature of display surface: 24 inches


2.4.4.1.1 Custom wall mount as indicated on Drawings.

10 14 63-12

2.4.4.1.2 Custom ceiling mount as indicated on Drawings.2.4.4.1.3 Custom self-supported floor mount as indicated on Drawings.2.4.4.1.4 Custom hanging mount as indicated on Drawings.












request2.4.5.2.1.14 Max Power Consumption: 22 watts per sf (full white)2.4.5.2.1.15 Working Voltage: 120 VAC/240 VAC @ 60Hz2.4.5.2.1.16 Service Access: Front; Rear by request

10 14 63-13

2.4.5.2.1.17 Depth of Finished Display: Approximately 4.125 inches2.4.5.2.1.18 Panel Size: 6 inches H by 12 inches W (152.4 mm H by 304.8 mm














2.4.7.2.1.1 Pixel Pitch: 9.5 mm2.4.7.2.1.2 Pixel Configuration: 3-in-1 SMD2.4.7.2.1.3 Pixel Density (per sf): 1,0242.4.7.2.1.4 Brightness: 1,800 nits max.2.4.7.2.1.5 LED Lifetime (.5 brightness): 100,000 hrs.2.4.7.2.1.6 Number of Colors: Greater than 16M2.4.7.2.1.7 Refresh Rate: 960 Hz (adjustable)2.4.7.2.1.8 Max BTU/hr per sf: 34 (full white)

10 14 63-14

2.4.7.2.1.9 Weight: 6.0 lbs/sf2.4.7.2.1.10 Horizontal Viewing Angle: 170 degrees (+/- 85 off center)2.4.7.2.1.11 Vertical Viewing Angle: 160 degrees (+/- 80 off center)2.4.7.2.1.12 Source Compatibility: DVI or HDMI; S-Video, Composite, HD-SDI





3 EXECUTION

3.1 EXAMINATION

3.1.1 Do not begin installation until substrates and support structure is in place and properly prepared.

3.1.2 Ensure required power and data sources have been provided.

3.1.3 Ensure planned space is available for centrally located components.

3.1.4 Ensure third-party components interfacing with the system have been provided.

3.1.5 Notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

3.2.1 Prepare substrates using the methods recommended by the manufacturer for achieving the best result under the project conditions.

3.2.2 Do not proceed with installation until support structure and substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.

3.3 INSTALLATION

3.3.1 Install in accordance with manufacturer's written instructions and recommendations and in proper relationship with adjacent work.

3.3.2 Rigidly mount message center and signs level and plumb with fasteners recommended by the manufacturer.

3.3.3 Record any necessary changes to the system design.

3.3.4 Startup equipment in accordance with manufacturer's instructions.

3.4 CLEANING

3.4.1 Clean system components where required.

10 14 63-15

3.5 CLOSEOUT ACTIVITIES

3.5.1 Demonstrate operational system to Owner representative.

3.5.2 Instruct Owner's representative to maintain system and use any occupant controls or interfaces, as required.

3.5.3 Review service and support contacts.

3.6 PROTECTION

3.6.1 Protect installed products until completion of project.

3.6.2 Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

10 14 63-16

arcat€¦ · web viewrecord minutes of the conference and provide copies to all parties present....

Documents