anwar al rawdha tech llc - waterproofing contractor ... · anwar al rawdha tech llc use products...

17
ANWAR AL RAWDHA TECH LLC COMPANY PROFILE Office no 1508, Silver Tower, Business Bay Dubai, UAE 0509719049 +971 501495274 P.O.Box: 123352 [email protected] www.alrawdhawaterproofing.com

Upload: duongkhanh

Post on 29-Jul-2018

219 views

Category:

Documents


0 download

TRANSCRIPT

ANWAR AL RAWDHA TECH LLC COMPANY PROFILE

Office no 1508, Silver Tower, Business Bay Dubai, UAE

0509719049 +971 501495274 P.O.Box: 123352

[email protected] www.alrawdhawaterproofing.com

TABLE OF CONTENTS

I. Introduction ........................................................................................................... 2

II. superior services .................................................................................................... 2

basement waterproofing

wall waterproofing

roof waterproofing

water tank waterproofing

swimming pool waterproofing

III. quality assurance ................................................................................................... 4

IV. customer service .................................................................................................... 5

V. why choose us ........................................................................................................ 6

VI. mission statement .................................................................................................. 6

VII. vision statement ..................................................................................................... 6

VIII. value statement ...................................................................................................... 7

IX. business strategies ................................................................................................. 7

X. project gallery ........................................................................................................ 7

ANWAR AL RAWDHA TECH LLC 2

INTRODUCTION

Anwar Al Rawdha Tech LLC was established in Dubai in 2005. It set out itself to be

the supplier of waterproofing solutions to commercial, industrial and residential

customers. Anwar Al Rawdha Tech LLC has been saving time, effort and money for

its customers ever since.

During these 12 years, Anwar Al Rawdha Tech LLC discovered that there are

hundreds of waterproofing membrane suppliers servicing the market just as many

products to choose from. Company found, through trial and error, that many

products had a relatively short life span of between 3 to 5 years and they did not

respond to the needs of fast application. As such, waterproofing contractors could

not give any significant, meaningful warranty to their work.

But Anwar Al Rawdha Tech LLC has identified superior product solutions for

waterproofing. Trained professional applicators, strong successful relationships with

manufacturers and suppliers and involvement of suppliers throughout the project

provide meaningful warranties.

SUPERIOR SERVICES

Anwar Al Rawdha Tech LLC specialize in solving problems such as water penetration

through the foundation walls, mould, fungi, efflorescent build up and moisture.

Water leakage occurs due to at least one of the following main factors:

❖ Lack of proper waterproofing

❖ Damaged foundation walls (cracks)

❖ Lack of maintenance.

❖ Topographical location of the structure (elevation)

❖ Seasonal water levels in the soil

❖ Type of fill around the home (clay, sand, rock or soil)

Company Services include waterproofing of Walls, Basement, Roof, Water Tanks,

Swimming Pools and Kitchens & Bathrooms.

BASEMENT WATERPROOFING

Anwar Al Rawdha Tech LLC creates a comprehensive solution to your problem, as

every basement and situation is different from others and they need to know where

the moisture could possibly come from.

They use the three methods to cope with your basement problems:

Interior Sealants & Waterproofing: Cracks in the concrete foundations are sealed

through special sealant materials. They also apply concrete waterproofing coating

to concrete walls in basement.

Exterior Waterproofing: They apply this to prevent the moisture damaging the

foundation. Waterproofing coating is applied to the walls after excavating around

the home to the bottom of foundation and directs the water down to drain system.

ANWAR AL RAWDHA TECH LLC 3

Interior & Exterior Drainage: To keep the water from entering your home we set up a

proper sump pump system in your basement that pumps the water out from your

home.

WALL WATERPROOFING

Anwar Al Rawdha Tech LLC provides both internal and external wall

waterproofing. Sometimes, there is a gap left between window frames and

masonry during masonry work. This gap widens with the passage of time

creating some leakage problems.

The waterproof coating, they apply has a quick drying property. So, it takes less

time and job is done quickly. It is a tough and flexible coating. Coating is twice

as thick as normal paint and it is resistant to algae and fungus.

There are exterior paints available in market that seems fancy and has a

thickness of only 50-60 microns. That level of thickness does not provide much

resistant to the water pressure. But they use waterproofing coating that is as

thick as 110-120 microns to provide enough resistant to water pressure.

ROOF WATERPROOFING

Roof is an important part of any structure that protects us from different weather

conditions. But it is also directly affected by the sunlight, wind and rain so we need

some measurements to protect it. Anwar Al Rawdha Tech LLC provide you a mean

which ensures that water is carried away from the building without causing any

dampness in walls or roofs. Before applying waterproofing materials to roofs Anwar

Al Rawdha Tech LLC prepare the surface of roof for waterproofing by cleaning,

washing and removing dust, oil and grease.

Anwar Al Rawdha Tech LLC applies multiple coats of waterproofing co-polymer and

cementitious waterproofing materials to gain the thickness of membrane. They

mainly use liquid applied membrane (LAM) as it is not affected by weather

conditions like humidity, rain or extreme hot weather.

Anwar Al Rawdha Tech LLC also use Pre-formed sheet membranes if needed. It is

the polymer-modified bitumen membranes and it is applied by heat. They have

recovery properties which make them suitable for contraction and expansion of a

building in fluctuating temperature.

Anwar Al Rawdha Tech LLC also apply insulation on a roof of the building which

keeps the building cold in hot weather. They also take steps to protect insulation by

applying vapor retarder such as plastic sheets between roof deck and insulation.

They then apply roof membrane over insulation to make a roof system watertight.

ANWAR AL RAWDHA TECH LLC 4

WATER TANK WATERPROOFING

Seepage and leakage in overhead and underground tanks aid in the growth of

algae and fungus and make your health and structure of tank weak and unstable.

Before applying waterproofing solution to the desired area, the area must be made

smooth and must be cleaned from dirt, oil and other loose particles. Then Anwar Al

Rawdha Tech LLC repairs the cracks or any other damage using a thin mortar that

can fill cracks in masonry. After the filling become dry we apply the first

waterproofing coating using trowel and second coating after four hours. This

coating is cement based and is highly flexible from inside and outside.

SWIMMING POOL WATERPROOFING

Anwar Al Rawdha Tech LLC use cement base products for treating leakage in

swimming pool because they are ideal for such cases. Before applying cementitious

waterproofing to the problem, Anwar Al Rawdha Tech LLC find the cause of

leakage using underwater magic products. Causes may include holes,

honeycombing, damage concrete or joints between vertical walls and ground.

Then before applying waterproofing material to the substrate they remove dust, oil

and any other particles using grinders and fresh water only.

Anwar Al Rawdha Tech LLC applies 3 layers of waterproofing membrane, second

and third layer is applied when the first layer has dried. Tests are conducted to

make sure that the treated area has successfully become watertight. For testing, fill

the pool at slow rate and for comparison fill the test vessel with water and keep it

next to the pool.

Tiles are mounted after all the layers are dried up and we make sure that the tiles

are aligned with other tiles.

QUALITY ASSURANCE

For peace of mind, we have, as part of our Quality Assurance system, introduced

and specify that all Applicators use our Quality Assurance System to maintain our

warranty. Certification is supplied for each tested area, signifying that the specific

area has been tested and signed off within our Quality Assurance requirements prior

to each client handover.

By partnering with major manufactures in the waterproofing, painting and concrete

restoration industries, Anwar Al Rawdha Tech LLC Waterproofing Solutions has

literally thousands of products to choose from. All these products are available in

market at a price that will ensure your Company can be ‘low bid’ on your projects

and provide maximum service and satisfaction to your clients.

Anwar Al Rawdha Tech LLC use products that fits to the following areas of expertise.

ANWAR AL RAWDHA TECH LLC 5

• Cementitious waterproofing

• Concrete and masonry cleaners

• Concrete hardeners, mortars and sealers

• Decorative deck coatings

• Firestop sealants and accessories

• Fluid applied membrane waterproofing

• Form release agents

• Glazing sealants and tapes

• Hot applied membrane waterproofing

• Industrial coatings

• Safety equipment

• Sealant systems

• Sheet membrane waterproofing

• Solvents

• Surface protection films

• Tools and accessories

• Water repellents

• Water stops

CUSTOMER SERVICE

At Anwar Al Rawdha Tech LLC Waterproofing Solutions we have appointed Zaheer

Khalid Khan as our Technical Sales Manager and Salma Abbas as a customer care

servicer to answer all your queries and requests, such as:

• Expertly advising clients, employees and sub-contractors of the emphasis we

place on quality

• Assuring clients that the Company’s services are carried out in a manner

that demonstrates integrity and co-reliability

• To regularly review the Company’s expertise and range of products to

ensure that all staff are professionally skilled and trained in all aspects of their

work

• To give the client what they are paying for: A solution to their waterproofing

issues

ANWAR AL RAWDHA TECH LLC 6

WHY CHOOSE US

The advantages and benefits of the Anwar Al Rawdha Tech LLC Systems include:

• High speed application rates possible for large projects

• Environmentally friendly: Green Certified and rated

• Excellent waterproofing membrane

• Anwar Al Rawdha Tech LLC Systems have a long, proven successful history

of use throughout UAE

• Resistant to mould and fungal growth

• High abrasion resistance and toughness

• Long term retention, flexibility and elasticity

• Colored top coats available

MISSION STATEMENT

Anwar Al Rawdha Tech LLC mission is to:

• Provide high quality, affordable contract waterproofing solutions

• Create and cultivate long term relationships with clients

• Respond immediately to the changing needs of our clients

• Achieve complete customer satisfaction

• Improve our service continuously

• Maintaining a well-trained and motivated staff compliment to ensure

consistency

• Using the latest methods and employing sound business acumen to remain

ahead of our competitors while offering unsurpassed services

• Carrying out all our activities in a safe environment and ensuring safety of

our employees and the public at large

VISION STATEMENT

Our Vision is to educate the real meaning of WATERPROOFING and is to become

the leading, respectable and preferred corporation which practice ethical values

and technical challenges in a more professional way in order to achieve customer

satisfaction.

ANWAR AL RAWDHA TECH LLC 7

VALUE STATEMENT

We preside and are committed to the following values:

• Honesty and integrity

• Urgency, proficiency and tenacity in carrying out our business

• Project delivery and reliability

• Innovation and creativity

• Long-lasting and cost-effective solutions

• Intellectual and professional leadership

• Quality assurance

• Occupational health and public safety

BUSINESS STRATEGIES

• Our Marketing Executive identifies leading Contractors all over UAE,

arranges a meeting and visits such party introducing our Company’s

systems.

• Subsequently, the case is then forwarded to Technical division for making a

technical awareness and recommendations of systems as per their

requirements of works.

• Our Business Managers then takes up for commercial inputs and finalizes the

commercial aspects.

• Our Accounts Manager looks after advances and payments of our

materials.

• Our Office Administrator arranges for the materials related as per specs

once the advance / payment terms are complied.

• Our Project Manager, installation team and approved applicator takes care

of installations and ultimately a successive treatment is delivered with

waterproofed structure.

PROJECT GALLERY

Latest projects done by Anwar Al Rawdha Tech LLC along with pictures are:

• CLEANCO SERVICES DUBAI

• FALCON TECHNOLOGIES INTERNATIONAL L.L.C.RAK

• NAKHEEL CONCESSIONS DUBAI

• ALUMCO LLC DUBAI

• KALHOUR OIL FIELD EQUIPMENTS LTD ABU DHABI

• TEAM TURNKEY INTERIORS LLC.DUBA

ANWAR AL RAWDHA TECH LLC 8

ANWAR AL RAWDHA TECH LLC 9

ANWAR AL RAWDHA TECH LLC 10

ANWAR AL RAWDHA TECH LLC 11

ANWAR AL RAWDHA TECH LLC 12

ANWAR AL RAWDHA TECH LLC 13

ANWAR AL RAWDHA TECH LLC 14

ANWAR AL RAWDHA TECH LLC 15

ANWAR AL RAWDHA TECH LLC 16