unit 1 “ scientific measurement ” lanphier high school advanced chemistry 235 mr. david m....
Post on 29-Jan-2016
224 Views
Preview:
TRANSCRIPT
Unit 1“Scientific Measurement”
Lanphier High School
Advanced Chemistry 235
Mr. David M. Peeler
Section 1.1Measurements and Their
UncertaintyOBJECTIVES:
Convert measurements to scientific notation.
Section 1.1Measurements and Their
UncertaintyOBJECTIVES:
Distinguish among accuracy, precision, and error of a measurement.
Section 1.1Measurements and Their
UncertaintyOBJECTIVES:
Determine the number of significant figures in a measurement and in a calculated answer.
Measurements We make measurements every day: buying
products, sports activities, and cooking Qualitative measurements are words, such as
heavy or hot Quantitative measurements involve numbers
(quantities), and depend on:1) The reliability of the measuring instrument2) the care with which it is read – this is determined
by YOU! Scientific Notation
Coefficient raised to power of 10 (ex. 1.3 x 107)
Accuracy, Precision, and Error
It is necessary to make good, reliable measurements in the lab
Accuracy – how close a measurement is to the true value
Precision – how close the measurements are to each other (reproducibility)
Precision and Accuracy
Neither accurate
nor precise
Precise, but not
accurate
Precise AND
accurate
Accuracy, Precision, and Error
Accepted value = the correct value based on reliable references (Density Table page 90)
Experimental value = the value measured in the lab
Accuracy, Precision, and Error
Error = accepted value – exp. value Can be positive or negative
Percent error = the absolute value of the error divided by the accepted value, then multiplied by 100%
| error |
accepted valuex 100%% error =
Why Is there Uncertainty?• Measurements are performed with instruments, and no instrument can read to an infinite number of decimal places•Which of the balances below has the greatest uncertainty in measurement?
Significant Figures in Measurements
Significant figures in a measurement include all of the digits that are known, plus one more digit that is estimated.
Measurements must be reported to the correct number of significant figures.
Figure 3.5 Significant Figures - Page 67
Which measurement is the best?
What is the measured value?
What is the measured value?
What is the measured value?
Rules for Counting Significant Figures
Non-zerosNon-zeros always count as always count as significant figures:significant figures:
34563456 hashas
44 significant figuressignificant figures
Rules for Counting Significant Figures
ZerosZerosLeading zeroes do not count as Leading zeroes do not count as
significant figures:significant figures:
0.04860.0486 has has
33 significant figures significant figures
Rules for Counting Significant Figures
ZerosZerosCaptive zeroes always count as Captive zeroes always count as
significant figures:significant figures:
16.0716.07 hashas
44 significant figures significant figures
Rules for Counting Significant Figures
ZerosZerosTrailing zerosTrailing zeros are significant only are significant only
if the number contains a if the number contains a written decimal point:written decimal point:
9.3009.300 has has
44 significant figures significant figures
Rules for Counting Significant Figures
Two special situationsTwo special situations have an have an unlimitedunlimited number of significant number of significant figures:figures:
1.1. Counted itemsCounted itemsa)a) 23 people, or 425 thumbtacks23 people, or 425 thumbtacks
2.2. Exactly defined quantitiesExactly defined quantitiesb)b) 60 minutes = 1 hour60 minutes = 1 hour
Sig Fig Practice #1How many significant figures in the following?
1.0070 m 5 sig figs
17.10 kg 4 sig figs
100,890 L 5 sig figs
3.29 x 103 s 3 sig figs
0.0054 cm 2 sig figs
3,200,000 mL 2 sig figs5 dogs unlimited
These all come from some measurements
This is a counted value
Significant Figures in Calculations
In general a calculated answer cannot be more precise than the least precise measurement from which it was calculated.
Ever heard that a chain is only as strong as the weakest link?
Sometimes, calculated values need to be rounded off.
Rounding Calculated Answers
Rounding Decide how many significant figures
are needed (more on this very soon) Round to that many digits, counting
from the left Is the next digit less than 5? Drop it. Next digit 5 or greater? Increase by 1
- Page 69
Be sure to answer the question completely!
Rounding Calculated Answers
Addition and Subtraction The answer should be rounded to the same number of decimal places as the least number of decimal places in the problem.
- Page 70
Rounding Calculated Answers
Multiplication and Division Round the answer to the same number of significant figures as the least number of significant figures in the problem.
- Page 71
Rules for Significant Figures in Mathematical Operations
Multiplication and DivisionMultiplication and Division:: # sig # sig figs in the result equals the number in figs in the result equals the number in the the least preciseleast precise measurement used measurement used in the calculation.in the calculation.
6.38 x 2.0 =6.38 x 2.0 =
12.76 12.76 13 13 (2 sig figs)(2 sig figs)
Sig Fig Practice #2
3.24 m x 7.0 m
Calculation Calculator says: Answer
22.68 m2 23 m2
100.0 g ÷ 23.7 cm34.219409283 g/cm34.22 g/cm3
0.02 cm x 2.371 cm0.04742 cm2 0.05 cm2
710 m ÷ 3.0 s 236.6666667 m/s 240 m/s
1818.2 lb x 3.23 ft5872.786 lb·ft 5870 lb·ft 1.030 g x 2.87 mL 2.9561 g/mL 2.96 g/mL
Rules for Significant Figures in Mathematical
OperationsAddition and SubtractionAddition and Subtraction: The : The
number of decimal places in the number of decimal places in the result equals the number of decimal result equals the number of decimal places in the places in the least preciseleast precise measurement.measurement.
6.8 + 11.934 =6.8 + 11.934 =
18.734 18.734 18.7 18.7 ((3 sig figs3 sig figs))
Sig Fig Practice #3
3.24 m + 7.0 m
Calculation Calculator says: Answer
10.24 m 10.2 m
100.0 g - 23.73 g 76.27 g 76.3 g
0.02 cm + 2.371 cm 2.391 cm 2.39 cm
713.1 L - 3.872 L 709.228 L 709.2 L
1818.2 lb + 3.37 lb 1821.57 lb 1821.6 lb
2.030 mL - 1.870 mL 0.16 mL 0.160 mL
*Note the zero that has been added.
Section 1.2The International System of Units
OBJECTIVES:
List SI units of measurement and common SI prefixes.
Section 1.2The International System of Units
OBJECTIVES:
Distinguish between the mass and weight of an object.
Section 1.2The International System of Units
OBJECTIVES:
Convert between the Celsius and Kelvin temperature scales.
International System of Units
Measurements depend upon units that serve as reference standards
The standards of measurement used in science are those of the Metric System
International System of Units
Metric system is now revised and named as the International System of Units (SI), as of 1960
It has simplicity, and is based on 10 or multiples of 10
7 base units, but only five commonly used in chemistry: meter, kilogram, kelvin, second, and mole.
The Fundamental SI Units (Le Système International,
SI)
Nature of Measurements
Part 1 – Part 1 – numbernumber Part 2 - Part 2 - scale (unit)scale (unit)
Examples:Examples: 2020 grams grams
6.63 x 106.63 x 10-34-34 Joule seconds Joule seconds
Measurement - quantitative observation Measurement - quantitative observation consisting of consisting of 2 parts2 parts::
International System of Units
Sometimes, non-SI units are used Liter, Celsius, calorie
Some are derived units They are made by joining other units Speed = miles/hour (distance/time) Density = grams/mL (mass/volume)
Length In SI, the basic unit of length is
the meter (m) Length is the distance between two objects – measured with ruler
We make use of prefixes for units larger or smaller
SI Prefixes – Page 74Common to Chemistry
PrefixUnit
AbbreviationMeaning Exponent
Kilo- k thousand 103
Deci- d tenth 10-1
Centi- c hundredth 10-2
Milli- m thousandth 10-3
Micro- millionth 10-6
Nano- n billionth 10-9
Volume The space occupied by any sample
of matter. Calculated for a solid by multiplying
the length x width x height; thus derived from units of length.
SI unit = cubic meter (m3) Everyday unit = Liter (L), which is
non-SI. (Note: 1mL = 1cm3)
Devices for Measuring Liquid Volume
Graduated cylinders Pipets Burets Volumetric Flasks Syringes
The Volume Changes! Volumes of a solid, liquid, or gas
will generally increase with temperature
Much more prominent for GASES Therefore, measuring
instruments are calibrated for a specific temperature, usually 20 oC, which is about room temperature
Units of Mass
Mass is a measure of the quantity of matter present Weight is a force that measures the pull by gravity- it changes with location
Mass is constant, regardless of location
Working with Mass
The SI unit of mass is the kilogram (kg), even though a more convenient everyday unit is the gram
Measuring instrument is the balance scale
Units of TemperatureTemperature is a measure of how hot or cold an object is.
Heat moves from the object at the higher temperature to the object at the lower temperature.
We use two units of temperature:Celsius – named after Anders CelsiusKelvin – named after Lord Kelvin
(Measured with a thermometer.)
Units of TemperatureCelsius scale defined by two readily determined temperatures:Freezing point of water = 0 oCBoiling point of water = 100 oCKelvin scale does not use the degree sign, but is just represented by K• absolute zero = 0 K (thus no negative values)
• formula to convert: K = oC + 273
- Page 78
Units of EnergyEnergy is the capacity to do work, or to produce heat.
Energy can also be measured, and two common units are:
1) Joule (J) = the SI unit of energy, named after James Prescott Joule
2) calorie (cal) = the heat needed to raise 1 gram of water by 1 oC
Units of Energy
Conversions between joules and calories can be carried out by using the following relationship:
1 cal = 4.18 J(sometimes you will see 1 cal = 4.184 J)
Section 1.3 Conversion Problems
OBJECTIVE:Construct conversion factors from equivalent measurements.
Section 1.3 Conversion Problems
OBJECTIVE:Apply the techniques of dimensional analysis to a variety of conversion problems.
Section 1.3 Conversion Problems
OBJECTIVE:Solve problems by breaking the solution into steps.
Section 1.3 Conversion Problems
OBJECTIVE:Convert complex units, using dimensional analysis.
Conversion factorsA “ratio” of equivalent measurements
Start with two things that are the same:
one meter is one hundred centimeters
write it as an equation
1 m = 100 cm
We can divide on each side of the equation to come up with two ways of writing the number “1”
Conversion factorsConversion factors
100 cm1 m =100 cm 100 cm
Conversion factorsConversion factors
11 m =100 cm
Conversion factorsConversion factors
11 m =100 cm
100 cm=1 m1 m 1 m
Conversion factorsConversion factors
11 m =100 cm
100 cm=1 m
1
Conversion factorsA unique way of writing the number 1
In the same system they are defined quantities so they have an unlimited number of significant figures
Equivalence statements always have this relationship:
big # small unit = small # big unit 1000 mm = 1 m
Practice by writing the two possible conversion factors for
the following:
Between kilograms and grams
between feet and inches
using 1.096 qt. = 1.00 L
What are they good for?
We can multiply by the number “one” creatively to change the units.
Question: 13 inches is how many yards?
We know that 36 inches = 1 yard.
1 yard = 1 36 inches
13 inches x 1 yard =36 inches
What are they good for?What are they good for?
We can multiply by a conversion factor to We can multiply by a conversion factor to change the units .change the units .
Problem: 13 inches is how many yards?Problem: 13 inches is how many yards? Known: 36 inches = 1 yard.Known: 36 inches = 1 yard. 1 yard = 11 yard = 1 36 36
inchesinches 13 inches x 1 yard 13 inches x 1 yard == 0.36 yards0.36 yards
36 inches 36 inches
Conversion factors
Called conversion factors because they allow us to convert units.
really just multiplying by one, in a creative way.
Dimensional AnalysisA way to analyze and solve problems, by using units (or dimensions) of the measurement
Dimension = a unit (such as g, L, mL)
Analyze = to solveUsing the units to solve the problems.
If the units of your answer are right, chances are you did the math right!
Dimensional AnalysisDimensional Analysis provides an alternative approach to problem solving, instead of with an equation or algebra.A ruler is 12.0 inches long. How long is it in cm? ( 1 inch = 2.54 cm)How long is this in meters?A race is 10.0 km long. How far is this in miles, if: 1 mile = 1760 yards 1 meter = 1.094 yards
Converting Between UnitsProblems in which measurements with one unit are converted to an equivalent measurement with another unit are easily solved using dimensional analysis
Sample: Express 750 dg in grams.
Many complex problems are best solved by breaking the problem into manageable parts.
Converting Between UnitsLet’s say you need to clean your car:
1) Start by vacuuming the interior
2) Next, wash the exterior
3) Dry the exterior
4) Finally, put on a coat of wax• What problem-solving methods can help
you solve complex word problems? Break the solution down into steps, and
use more than one conversion factor if necessary
Converting Complex Units?Complex units are those that are expressed as a ratio of two units:
Speed might be meters/hour
Sample: Change 15 meters/hour to units of centimeters/second
How do we work with units that are squared or cubed? (cm3 to m3, etc.)
- Page 86
Section 1.4Density
OBJECTIVES:
Calculate the density of a material from experimental data.
Section 1.4Density
OBJECTIVES:
Describe how density varies with temperature.
Density Which is heavier- a pound of lead
or a pound of feathers? Most people will answer lead, but the weight is exactly the same
They are normally thinking about equal volumes of the two
The relationship here between mass and volume is called Density
Density The formula for density is:
mass
volume
• Common units are: g/mL, or possibly g/cm3, (or g/L for gas)
• Density is a physical property, and does not depend upon sample size
Density =
- Page 90Note temperature and density units
Density and Temperature
What happens to the density as the temperature of an object increases? Mass remains the same Most substances increase in volume
as temperature increases
Thus, density generally decreases as the temperature increases
Density and Water Water is an important exception to
the previous statement. Over certain temperatures, the
volume of water increases as the temperature decreases (Do you want your water pipes to freeze in the winter?) Does ice float in liquid water? Why?
- Page 91
- Page 92
top related