regenerative blowers - ppe

www.ppe.com

Order Fax: 800-223-8305

e-mail: sales@ppe.com

Toll Free: USA, Canada & Mexico

800-362-0706

PLASTIC PROCESS EQUIPMENT, INC.6385 MONTESSOURI STREETLAS VEGAS, NEVADA 89113702-433-6385 • FAX: 702-433-6388TOLL FREE: 800-258-8877

E

A

S

T

WE

S

T

8303 CORPORATE PARK DRIVE

MACEDONIA, OHIO 44056

216-367-7000 • FAX: 216-367-7022

TOLL FREE: 800-321-0562

REGENERATIVE BLOWERS(VACUUM PUMPS)

FOR DRYERS, PNEUMATIC CONVEYORS, VACUUM SYSTEMS, ETC.

Manufactured since 1986, the All-Star Regenerative Blowers

are the best choice for applications requiring a quiet, 100% oil-

free, odor-free and non-pulsating air or gas supply.

Regenerative Blowers are also referred to as side channel,

vortex or ring-type blowers.

All-Star Regenerative Blowers (Vacuum Pumps) offer an

alternative to traditional high pressure blowers and pumps. The

regenerative blower is suitable for applications where positive

displacement (PD-type) blowers and pumps have been used.

It’s simple design permits the units to be used as a blower or

vacuum pump - without added parts.

STRADDLE MOUNTED IMPELLER DESIGNHigh bearing temperatures that prove fatal in competitive

blowers are eliminated in the All-Star design because the

bearings are mounted on the outside of the blower housing.

Damaging overhung loads are eliminated in the All-Star design

because a bearing is located on each side of the impeller. This

design permits mounting the blower in any orientation, including

vertical shaft up or down.

FEATURES

• 1/4 to 30 HP

• Air Flow to 950 SCFM

• Pressure to 11.5 psi

• Vacuum to 12”Hg

• Oil & Odor-free

• Single or 3-Phase

• Quiet: 53 to 81 db(A)

Competitive OverhungBearing Design

Inboard bearing subject to• High Heat• High Overhung Load Due To Radial Forces

All Star StraddleMounted Bearing Design

Impeller

Impeller Housing

Outboard bearing• Cooler Operating Bearing• Overhung Load Eliminated

High-efficient dynamicallybalanced impeller

High temperature bearinglubricant melt point 385°F.

Industrial duty, high efficient,1.15 service factor AC motorwith TEFC (IP54) enclosure.

Class H insulation rated to 355º F.

Corrosion resistantaluminum materials used

for blower and motorhousings, conduit boxViton seals suitable

to 500°F protectsthe motor windings

Removable flangesallow blower

change withoutdisassembly of

pilings.

Built-insilencers reducenoise well-belowOSHA Standard

Shock absorbingmounting base

ISO-9001MANUFACTURED IN A

QUALITY SYSTEM CERTIFIED

FACILITY.

RoHSCompliant

C

285