pte resistance thermometer v3.0 - senmatic

PERFECT YOUR PERFORMANCE WITH EXPERTISE

Resistance thermometer TYPE PTECable sensor

Ordering: See ordering form on back page

l Straight thermometer for measurement of temperatures in pipe-lines and containers, mounted in immersion wells, on the outside of pipelines, in gases and in machinery, e.g. in connection with bearings, in the LOW-PRESSURE RANGE.

l The measuring inset is according to EN 60751.

l The protective sheath is standard of Ø6×0.5 mm stainless steel, AISI 316.

l The connecting cable is standard available in PUR and silicone.

l The standard is without connection. (compression fitting available on request).

l Response time (mean values) measured at velocities in:

water at 0.4 m/s: t0.5 = 10 sec. - t 0.9 = 42 sec.

air at 3.0 m/s: t0.5 = 24 sec.

l Recommended measuring current: max. 2 mA.

l Approvals: DNV-GL, Bureau Veritas, DNV-GL EU RO MR.

Spring

None

EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE - Group members are:

ORDERING FORM / RESISTANCE THERMOMETER TYPE PTE

Head office:

Senmatic A/SIndustrivej 8, 5471 Søndersø, DenmarkPhone: +45 64 89 22 11dk@senmatic.com - www.senmatic.com

Number of conductors2 ................... 2 cond.3 ................... 3 cond.4 ................... 4 cond.

Imm. length/L1/mmMin. 40 mm -max. 500 mmOptional length ......

Cable matr./temp.range2 .... Silicone -50/+180°C3 .... Teflon/screen -200/+260°C4 .... Arm. fibreglass -50/+350°C5 .... Arm. teflon -200/+260°C6 .... Silicone/screen -50/+180°C7 .... PUR -20/+70°CSheath dia./wallth./mm

6×0.5 ............................ 18×1 .............................. 25.8×0.4 ........................ 3

ConnectionNONE ............................... 1 Flange .............................. 2Clip ................................... 3

Length/cable/L/mmMin. 100 mm -max. 150,000 mmOptional length .......................

Tolerance class/DIN1 ........ Cl. A : ±0.15 °C2 ........ Cl. B : ±0.3 °C3 ........ 1/3 DIN : ±0.1 °C4 ........ 1/6 DIN : ±0.05 °C

JunctionNone ......................................... 0Flex ........................................... 1Spring ....................................... 2

Type PTE

Resistance in ohms at 0°C1 ............ 1002 ............ 5003 ............ 1000

Number of elements1 ................. 1×Pt2 ................. 2×Pt (only 2 conductor)3 ................. 1×Ni

V3.0

Connection diagram:

2×Pt

1×Pt

RW

RW RW

R RW RW RW