pte resistance thermometer v3.0 - senmatic
TRANSCRIPT
PERFECT YOUR PERFORMANCE WITH EXPERTISE
Resistance thermometer TYPE PTECable sensor
Ordering: See ordering form on back page
l Straight thermometer for measurement of temperatures in pipe-lines and containers, mounted in immersion wells, on the outside of pipelines, in gases and in machinery, e.g. in connection with bearings, in the LOW-PRESSURE RANGE.
l The measuring inset is according to EN 60751.
l The protective sheath is standard of Ø6×0.5 mm stainless steel, AISI 316.
l The connecting cable is standard available in PUR and silicone.
l The standard is without connection. (compression fitting available on request).
l Response time (mean values) measured at velocities in:
water at 0.4 m/s: t0.5 = 10 sec. - t 0.9 = 42 sec.
air at 3.0 m/s: t0.5 = 24 sec.
l Recommended measuring current: max. 2 mA.
l Approvals: DNV-GL, Bureau Veritas, DNV-GL EU RO MR.
Spring
None
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE - Group members are:
ORDERING FORM / RESISTANCE THERMOMETER TYPE PTE
Head office:
Senmatic A/SIndustrivej 8, 5471 Søndersø, DenmarkPhone: +45 64 89 22 [email protected] - www.senmatic.com
Number of conductors2 ................... 2 cond.3 ................... 3 cond.4 ................... 4 cond.
Imm. length/L1/mmMin. 40 mm -max. 500 mmOptional length ......
Cable matr./temp.range2 .... Silicone -50/+180°C3 .... Teflon/screen -200/+260°C4 .... Arm. fibreglass -50/+350°C5 .... Arm. teflon -200/+260°C6 .... Silicone/screen -50/+180°C7 .... PUR -20/+70°CSheath dia./wallth./mm
6×0.5 ............................ 18×1 .............................. 25.8×0.4 ........................ 3
ConnectionNONE ............................... 1 Flange .............................. 2Clip ................................... 3
Length/cable/L/mmMin. 100 mm -max. 150,000 mmOptional length .......................
Tolerance class/DIN1 ........ Cl. A : ±0.15 °C2 ........ Cl. B : ±0.3 °C3 ........ 1/3 DIN : ±0.1 °C4 ........ 1/6 DIN : ±0.05 °C
JunctionNone ......................................... 0Flex ........................................... 1Spring ....................................... 2
Type PTE
Resistance in ohms at 0°C1 ............ 1002 ............ 5003 ............ 1000
Number of elements1 ................. 1×Pt2 ................. 2×Pt (only 2 conductor)3 ................. 1×Ni
V3.0
Connection diagram:
2×Pt
1×Pt
RW
RW RW
R RW RW RW