partners in the production of solar cells in the production of solar cells 50097 en 02/2008 wafer or...
Post on 08-Jul-2018
216 Views
Preview:
TRANSCRIPT
Partners in the production
of solar cells
50
09
7 e
n 0
2/2
00
8
Wafer or thin-film?
Solar cells made from wafersworking with crystalline silicon.Thin-film cells based on amorphous semiconductors.For both of these extremelyvaried production methods,Festo guarantees high pro -ductivity.
The planning of a complex net-work denotes the beginning ofa smooth system operation.Only when all air and powersupply functions and associat -ed services – including driveunits and valve terminals –interact seamlessly with oneanother can high reliability beguaranteed.
Trust in globally available innovative automation! Top-class technology – a world first
Here is the latest proof thatwe are a competent partner insolar-cell production: Festohas achieved a world first forthe transportation of thesesensitive cells at one of themost critical stations.
This innovative support function for cell handling viathe ESG-type vacuum genera -tors keeps the silicon waferperfectly flat. This in turnmakes the transport muchmore gentle and reliable.
This is what we mean by competence – in both thewafer- and thin-film-basedproduct ion of solar cells.
Call us for more information.
Producing wafer-based cells
Production needs to be quickerand extremely reliable, and sothe handling of delicate solarcells is the key for maximumproductivity. The trend is heading towards thinner andthinner wafers with an expo-nent ially greater risk of breaka-ge; in future, the current thik-kness of up to 240 μm will bereduced to just 100 μm.
Producing wafer-based solarcells more reliably, more gentlyand more quickly: regardless ofwhether it concerns the clean -ing of the wafer surface, con-tact by means of a silk screenor inspection/testing and sort -ing, the automation technologyfrom Festo guarantees all threeof these improvements.
Producing thin-film cells
During the automation stage of the thin-film process system,Festo’s competence and that of its partners proves its trueworth. Included: the previouslymentioned handling excellencewhich is perfectly adapted tothe accelerated transport of thelarge-scale thin-film cells. Anindispensable prerequisite forthis are the decentralised control concepts via fieldbusvalve terminals in the extensiveproduction systems.
Pure competitive advantage:
competent consulting and
industrial services
Thanks to its system and process competence, Festo isable to carry out all tasks tocompletion, from pick & placeto customer-specific handling,from process-valve drives tocontrollers:
• Pure speed from the prepar -ation of quotations to thecommissioning
• Fastest possible constructionusing customised 2D/3D CADmodels, machine documen -tation included
• Calculations and functiontests for maximum operation -al reliability
• Components and systemmodules and technology ofthe highest quality – basedon a standardised modularsystem
Festo is very customer orien -tated thanks to its tightly run network of 56 companies andsubsidiaries at 250 locations inover 176 countries.
The know-how and commit-ment of ap proximately 12,000employees worldwide guaran-tees long-term success for our customers.
Festo AG & Co. KG
Ruiter Strasse 8273734 EsslingenGermanywww.festo.comTel. +49 711 347-0Fax +49 711 347-2144service_international@festo.com
Partners in the production
of solar cells
50
09
7 e
n 0
2/2
00
8
Wafer or thin-film?
Solar cells made from wafersworking with crystalline silicon.Thin-film cells based on amorphous semiconductors.For both of these extremelyvaried production methods,Festo guarantees high pro -ductivity.
The planning of a complex net-work denotes the beginning ofa smooth system operation.Only when all air and powersupply functions and associat -ed services – including driveunits and valve terminals –interact seamlessly with oneanother can high reliability beguaranteed.
Trust in globally available innovative automation! Top-class technology – a world first
Here is the latest proof thatwe are a competent partner insolar-cell production: Festohas achieved a world first forthe transportation of thesesensitive cells at one of themost critical stations.
This innovative support function for cell handling viathe ESG-type vacuum genera -tors keeps the silicon waferperfectly flat. This in turnmakes the transport muchmore gentle and reliable.
This is what we mean by competence – in both thewafer- and thin-film-basedproduct ion of solar cells.
Call us for more information.
Producing wafer-based cells
Production needs to be quickerand extremely reliable, and sothe handling of delicate solarcells is the key for maximumproductivity. The trend is heading towards thinner andthinner wafers with an expo-nent ially greater risk of breaka-ge; in future, the current thik-kness of up to 240 μm will bereduced to just 100 μm.
Producing wafer-based solarcells more reliably, more gentlyand more quickly: regardless ofwhether it concerns the clean -ing of the wafer surface, con-tact by means of a silk screenor inspection/testing and sort -ing, the automation technologyfrom Festo guarantees all threeof these improvements.
Producing thin-film cells
During the automation stage of the thin-film process system,Festo’s competence and that of its partners proves its trueworth. Included: the previouslymentioned handling excellencewhich is perfectly adapted tothe accelerated transport of thelarge-scale thin-film cells. Anindispensable prerequisite forthis are the decentralised control concepts via fieldbusvalve terminals in the extensiveproduction systems.
Pure competitive advantage:
competent consulting and
industrial services
Thanks to its system and process competence, Festo isable to carry out all tasks tocompletion, from pick & placeto customer-specific handling,from process-valve drives tocontrollers:
• Pure speed from the prepar -ation of quotations to thecommissioning
• Fastest possible constructionusing customised 2D/3D CADmodels, machine documen -tation included
• Calculations and functiontests for maximum operation -al reliability
• Components and systemmodules and technology ofthe highest quality – basedon a standardised modularsystem
Festo is very customer orien -tated thanks to its tightly run network of 56 companies andsubsidiaries at 250 locations inover 176 countries.
The know-how and commit-ment of ap proximately 12,000employees worldwide guaran-tees long-term success for our customers.
Festo AG & Co. KG
Ruiter Strasse 8273734 EsslingenGermanywww.festo.comTel. +49 711 347-0Fax +49 711 347-2144service_international@festo.com
Die Produkte und Services von Festodecken die komplette Steuerkette ab,optimierte Schnittstellen inklusive – füreine systematisch schnellere Anlagen-konzeption und Realisierung.
Alles aus einer Hand
You can only supply reliable and economic components and systemscompetently if you understand the production and process steps in thefield of solar-cell production.
Festo has mastered the decisive stations in this production process.
Faster and more reliable transport…
… of solar cells in a screen printing line.In this process, the electrical contactsconsisting of a silver paste are pressedonto the front and rear sides. In thiscase, the ADN cylinders from Festo drivea lifting station.
Safe use…
… of chemicals on the PSG etching line:CPV valve terminals from Festo controldiaphragm valves by our partner, GEMÜ.The diaphragm valves control the flowof the chemicals which etch away theundesirable PSG (phosphorous silicateglass) at this particular production sta-tion.
Excellent compressed air quality…
… on the transport line is guaranteed by this MS4-type maintenance unit with modular configuration.In this way, the air conditioning for this transportline can be adapted to the individual system struc-ture and the necessary compressed air quality.The effect: maximum process reliability from theoutset.
Precise loading and unloading…
… at this wafer-cassette station is managed byMTR-AC-type servo motors. They move the cas-settes to the correct respective positions.
Prompt quality management…
… before the other processing phases is guaranteed by the intelligent SBOC-Q compactvision system: in this case, the edge properties of solar cells are being tested. Optional: Integrated optics and lighting in theSBOI-Q version.
Maximum dynamic response…
… in the handling of sensitive cells is possiblethanks to this beam kinematics system. Theinternal development uses an EV module fromFesto. It acts as an energy-saving, pneumaticholding brake, so that the system does not needto be supplied with power when on standby.
A focus on competence: production stations for solar cells
Festo’s products and servicescover the entire control chain,including optimal interfaces.For a quick systematic systemdesign and implementation.
Everything from
a single source
Management level
Actuation
Drive units
Grippers
Sensors
Field level
Position DistanceProximity Pressure Flow rate
Freely positionablegrippers
Parallel grippersAngle grippers3-jlaw grippers
FHPP
Festo Handling andPositioning Profile
CoDeSys
provided by Festo
FST 4
Festo Software Tool
Ethernet
Fieldbus
(Profibus,Interbus,DeviceNet,CANopen,CC-Link)
AS-Interface
FCT
Festo Configuration Tool T-slot grippers
ColourObject sensing Signal converter Integrated sensors
Micro grippersSwivel/gripper units Vacuum grippers Vacuum generators
Control system
Controllers
Operation/Visualisation
Control level
Radial grippers
Management system
SPS(ABB, Allen-Bradley,Rockwell, Siemens,etc.)
Robotic controlCMXR
Axis interface
CPX-CMMX
PLC
CECX
CPX web monitor
Diagnostics and pre-processing
On site diagnostics
Diagnostics and commissioning
Type, position androtary orientationsensing
Type, orientation detection and quality inspection
Diagnostics,
vision
VIPWin visualisation
Electrical installation concepts• Central• Decentralised• On-site• Hybrid
CPX web monitor
CPI installationsystem
Stand alone units on site
Servomotor controller CMMP-AS
Steppermotorcontroller CMMS-ST
Motorcontroller SFC
Front End Displays
economical
Linear drives Semi-rotary drives Handling modules
Valve Valve terminal MPA Valve terminal on site
I/O modules
compact
sturdy
Pneumatic
Proportional valve
Servopneumatic
Axis controllerSPC200
Linear drives withdisplacement encoder
Semi-rotary drives withdisplacement encoder
Spindle axisDGE-SP
Cantilever axisDGEA-ZR
Toothed belt axisDGE-ZR
Electric cylinderDNCE
Pick & Place unit HSP-AE
Servo driveDMES
Mini slide SLTE withDC motor
Handling axis HMEwith linear motor
Servo motor EMMS-AS
Stepper motor EMMS-ST
Servo motor MTR-DCI
Electrical
Plug&Work
VIPWin visualisationFront End Displays • Over 300 tested standard handlingsystems
• Just one contact, one order, one delivery, one price
• Complete documentation and CAD data
Pick & Place
Control cabinet installation
Lineargantry
Cantilever gantry
Three-dimensional gantry
Tripod kinematics
Die Produkte und Services von Festodecken die komplette Steuerkette ab,optimierte Schnittstellen inklusive – füreine systematisch schnellere Anlagen-konzeption und Realisierung.
Alles aus einer Hand
You can only supply reliable and economic components and systemscompetently if you understand the production and process steps in thefield of solar-cell production.
Festo has mastered the decisive stations in this production process.
Faster and more reliable transport…
… of solar cells in a screen printing line.In this process, the electrical contactsconsisting of a silver paste are pressedonto the front and rear sides. In thiscase, the ADN cylinders from Festo drivea lifting station.
Safe use…
… of chemicals on the PSG etching line:CPV valve terminals from Festo controldiaphragm valves by our partner, GEMÜ.The diaphragm valves control the flowof the chemicals which etch away theundesirable PSG (phosphorous silicateglass) at this particular production sta-tion.
Excellent compressed air quality…
… on the transport line is guaranteed by this MS4-type maintenance unit with modular configuration.In this way, the air conditioning for this transportline can be adapted to the individual system struc-ture and the necessary compressed air quality.The effect: maximum process reliability from theoutset.
Precise loading and unloading…
… at this wafer-cassette station is managed byMTR-AC-type servo motors. They move the cas-settes to the correct respective positions.
Prompt quality management…
… before the other processing phases is guaranteed by the intelligent SBOC-Q compactvision system: in this case, the edge properties of solar cells are being tested. Optional: Integrated optics and lighting in theSBOI-Q version.
Maximum dynamic response…
… in the handling of sensitive cells is possiblethanks to this beam kinematics system. Theinternal development uses an EV module fromFesto. It acts as an energy-saving, pneumaticholding brake, so that the system does not needto be supplied with power when on standby.
A focus on competence: production stations for solar cells
Festo’s products and servicescover the entire control chain,including optimal interfaces.For a quick systematic systemdesign and implementation.
Everything from
a single source
Management level
Actuation
Drive units
Grippers
Sensors
Field level
Position DistanceProximity Pressure Flow rate
Freely positionablegrippers
Parallel grippersAngle grippers3-jlaw grippers
FHPP
Festo Handling andPositioning Profile
CoDeSys
provided by Festo
FST 4
Festo Software Tool
Ethernet
Fieldbus
(Profibus,Interbus,DeviceNet,CANopen,CC-Link)
AS-Interface
FCT
Festo Configuration Tool T-slot grippers
ColourObject sensing Signal converter Integrated sensors
Micro grippersSwivel/gripper units Vacuum grippers Vacuum generators
Control system
Controllers
Operation/Visualisation
Control level
Radial grippers
Management system
SPS(ABB, Allen-Bradley,Rockwell, Siemens,etc.)
Robotic controlCMXR
Axis interface
CPX-CMMX
PLC
CECX
CPX web monitor
Diagnostics and pre-processing
On site diagnostics
Diagnostics and commissioning
Type, position androtary orientationsensing
Type, orientation detection and quality inspection
Diagnostics,
vision
VIPWin visualisation
Electrical installation concepts• Central• Decentralised• On-site• Hybrid
CPX web monitor
CPI installationsystem
Stand alone units on site
Servomotor controller CMMP-AS
Steppermotorcontroller CMMS-ST
Motorcontroller SFC
Front End Displays
economical
Linear drives Semi-rotary drives Handling modules
Valve Valve terminal MPA Valve terminal on site
I/O modules
compact
sturdy
Pneumatic
Proportional valve
Servopneumatic
Axis controllerSPC200
Linear drives withdisplacement encoder
Semi-rotary drives withdisplacement encoder
Spindle axisDGE-SP
Cantilever axisDGEA-ZR
Toothed belt axisDGE-ZR
Electric cylinderDNCE
Pick & Place unit HSP-AE
Servo driveDMES
Mini slide SLTE withDC motor
Handling axis HMEwith linear motor
Servo motor EMMS-AS
Stepper motor EMMS-ST
Servo motor MTR-DCI
Electrical
Plug&Work
VIPWin visualisationFront End Displays • Over 300 tested standard handlingsystems
• Just one contact, one order, one delivery, one price
• Complete documentation and CAD data
Pick & Place
Control cabinet installation
Lineargantry
Cantilever gantry
Three-dimensional gantry
Tripod kinematics
top related