how to make triple beaded pendant diy jewelry making tutorial
Post on 17-Feb-2017
198 Views
Preview:
TRANSCRIPT
How To Make: Triple Beaded Pendant
Materials: 7.5 Inches of 20 gauge copper wire, 3 crackle beads – size 6 mm, 1 copper bead – size 5 mm, 1 copper bead – size 2.5 mm
Tools: Round Nose Pliers, Wire Cutters
Step 1: Insert crackle beads onto the wire
Step 2: Bend wire as shown in the photo
Step 3: Bend wires around beads cluster as shown in the photo, then put copper bead size 5 mm onto both wires
Step 4: Shape wire around the copper bead, then bend it to the reverse side of the pendant. Trim wire if you need to, to create small loop at the end of the wire
Step 5: Insert another copper bead onto the wire and wrap it around the bead as shown in the photo
Step 6: Now bend the wire to create a hook shape, then close it. If you need to trim the wire. Now attach the chain. Your necklace is ready to wear!
top related