how to make genuine goldstone earrings diy jewelry making tutorial
Post on 12-Apr-2017
131 Views
Preview:
TRANSCRIPT
How To Make: Genuine Goldstone Earrings
Materials: 2 ball headpins – around 3 inches long, 2 sandstone (goldstone) beads – size 10 mm, 4 copper beads – size 4 mm, 4 copper beads – size 3 mm, 2 copper beads – size 2 mm, 8 bead caps – size/diameter 9 mm, 4 bead caps – size/diameter 7 mm,Pair of earwires
Tools: Round Nose Pliers, Wire Cutters
Step 1: Insert two copper beads (size 3 mm and 4 mm) onto the headpin
Step 2: You need to bend bead cap (size 9 mm) as shown in the photo. The best way to do it is by squeezing it on the headpin
Step 3: Insert 2 more bead caps (size 7 mm and 9 mm), a sand stone bead and again bead caps (9 mm and 7 mm)
Step 4: Insert 1 bead cap (size 9 mm) and copper beads. Then move those elements up on the headpin in order to bend the bead cap by squeezing in delicately. Then move it all to the sand stone bead
Step 5: Create a loop, trim the pin if you need to and close the shape to create final loop. Repeat all the steps to create second Earring. Now attach earwires. Your earrings are ready to wear!
top related