how to apply islamic wall art shahadah calligraphy decals

HOW TO APPLY ISLAMIC WALL

ARTA very easy to follow instruction

By JR Decal http://www.jrdecal.com

PREPARATIONYou will need few things to start. Pencil to mark the place Dry cloth to clean the surface Masking tape to stick the wall

sticker temporarily (Optional) Scissor (Optional) ID card/Bank Card or a plastic

Squeegee

STEP 01

Step 01:  Clean the surface with a dry cloth. Then

mark the desired place

STEP 02

Place the wall sticker on a plain table or hard surface then smooth out the backing paper using ID card/bank card or plastic squeegee, so that no bubble left.

STEP 03 Stick the wall sticker on the desired place using masking tape

STEP 04Carefully remove the backing paper at the flat angel to ensure that the decal remains adhere to the application tape

STEP 05Cut half of the backing paper .Then affix the decal to the desired location with the adhesive side facing the surface

STEP 06Smooth out the application tape using plastic squeegee or card, make sure the sticker is properly applied to the surface

STEP 07repeat step 03 to 06 for the rest of the sticker.

STEP 08Carefully peel off the application tape from the upper right corner at the flat angle. Peel completely. If any part is not affixed to the wall properly, press them using the squeegee.

STEP 09Done!

See your wall now.

THANK YOU You can find this design onhttp://www.jrdecal.com

Contact us at support@jrdecal.com