gate array design

27/11/2007 DSD,USIT,GGSIPU 1

Gate array design

• Use a sea of basic transistors (pmos/nmos) or gates (NAND/NOR)

• Can have cells which can provide a universal logic function

• Just need to add signal routing – only a few masksAdvantages:• Reduced design time• Less chance of errors• Reduced production costs• Decrease time to product

27/11/2007 DSD,USIT,GGSIPU 2

www.geocities.com/aps_ipu

27/11/2007 DSD,USIT,GGSIPU 3

Gate Array Design (Cont.)

Disadvantages:

• Very Limited flexibility

• Need moderately high volume product

• Less easily protected IPR

27/11/2007 DSD,USIT,GGSIPU 4

Programmable design

• Use an array of logic cells

• Cells can provide a universal logic function

• Signal routing through switch box approach

• RAM holds routing patterns (re-programmable)

27/11/2007 DSD,USIT,GGSIPU 5

Advantages:• Reduced design time• Easily reworked• Low design costs• Decrease time to productDisadvantages:• Limited flexibility• Low volume production• Less easily protected IPR

27/11/2007 DSD,USIT,GGSIPU 6

Programmable Logic Devices (PLDs)

Programmable logic device, or PLD, is a general name for a digital integrated circuit

• capable of being programmed to provide a variety of different logic functions.

There are four main families of PLDs:- Programmable logic arrays (PLA)- Programmable array logic devices (PAL)- Read-only memories (ROM)- Complex PLDs (FPGAs, RAM)

27/11/2007 DSD,USIT,GGSIPU 7

• Programmable switches allow connections to be made in an array of logic gates. We will look at the operation of each and examples of combinatorial and sequential design with each.

27/11/2007 DSD,USIT,GGSIPU 8

Programmable Logic Devices (PLDs)

What are the advantages of programmable logic devices?

• simple PLDs can realise from 2 to 10 functions of 4 to 16 variables on a

• single integrated circuit• excellent for prototyping designs• it is possible to replace a number of SSI devices

with a single device to• realise logic networks

27/11/2007 DSD,USIT,GGSIPU 9

• single chip required to implement (possibly large) logic designs

• complex PLDs can be used realise complex digital systems– even processors!

• PLDs allow us to simplify designs and reduce development times– hence reduced overheads!

• changes in the design can be easily implemented by reprogramming the device

27/11/2007 DSD,USIT,GGSIPU 10

Programmable Technology

Fusible link devices - e.g. the PROM- Blowing a fuse breaks a link between lines- Once programmable- Very high density possible

Electrical switching elements - e.g. the EPROM, EEPROM• nMOS transistors used to ‘switch’ connections between

lines• Devices can be re-programmed• Relatively high density• How do we program PLDs?

27/11/2007 DSD,USIT,GGSIPU 11

Structure of PAL

27/11/2007 DSD,USIT,GGSIPU 12

Layout of a part of a Programmable Logic Cell

27/11/2007 DSD,USIT,GGSIPU 13

Structure of a FPGA

27/11/2007 DSD,USIT,GGSIPU 14

Configuration of Memory Cell

27/11/2007 DSD,USIT,GGSIPU 15

Configuration of Xilinx 300

27/11/2007 DSD,USIT,GGSIPU 16

Programmable I/O

27/11/2007 DSD,USIT,GGSIPU 17

General Purpose Interconnect

27/11/2007 DSD,USIT,GGSIPU 18

Direct Interconnect

27/11/2007 DSD,USIT,GGSIPU 19

Vertical and Horizontal long line

27/11/2007 DSD,USIT,GGSIPU 20

EPROM Programmable Switches

27/11/2007 DSD,USIT,GGSIPU 21

Actel antifuse structure

27/11/2007 DSD,USIT,GGSIPU 22

Altera 700 Logic Array Blocks

27/11/2007 DSD,USIT,GGSIPU 23

Xilinx 7000 CLB

27/11/2007 DSD,USIT,GGSIPU 24

References1. S. Brown, R. Francis, J. Rose, Z. Vranesic, Field-

Programmable Gate Arrays, Kluwer Academic Publishers, May 1992.

2. S. Trimberger, Ed., Field-Programmable Gate Array Technology, Kluwer Academic Publishers, 1994.

3. J. Rose, A. El Gamal, A. Sangiovanni-Vincentelli, “Architecture of Field- Programmable Gate Arrays,” in Proceedings of the IEEE, Vol. 81, No. 7, July 1993, pp. 1013-1029.

4. J. Oldfield, R. Dorf, Field Programmable Gate Arrays, John Wiley & Sons, New York, 1995.

5. C.H.Roth, DSD with VHDL, Thomson Learning