assessment validation – why and how tony auciello 18 th october 2012
Post on 04-Jan-2016
40 Views
Preview:
DESCRIPTION
TRANSCRIPT
Assessment Validation –
Why and HowTony Auciello 18th October 2012
Ambition in Action
www.sit.nsw.edu.au
Session objective
/ Gain a common understanding with regard to validation requirements for the VET sector and Sydney InstituteAssessment validationAssessment DesignCompetency Mapping
Ambition in Action
www.sit.nsw.edu.au
What is assessment validation?
Process of comparison and evaluation of assessment tools/processes against competency standard/s and bench marks to ensure that assessment tools meet the Principles of Assessment and the Rules of Evidence.
Ambition in Action
www.sit.nsw.edu.au
Assessment Validation Activities
/ Assessment Validation activities involve teachers developing a shared interpretation of competency standards and comparing assessment methods and tools. This process is to encourage dialogue between teachers and with industry about assessment practice.
Ambition in Action
www.sit.nsw.edu.au
Teachers Role in Assessment Validation
/ Teachers are required to participate in assessment validation activities and record the changes that they make to assessment tools and activities.
Ambition in Action
www.sit.nsw.edu.au
Assessment Validation Procedure
/ Assessment Validation involves planning assessment validation activities on an annual basis, conducting assessment validation and improving assessment strategies, processes, tools and practices in a continuous improvement cycle using a risk management approach
Ambition in Action
www.sit.nsw.edu.au
NVR Standards for the operation of RTOsThe new Standards for nationally regulated RTOs (the SNRs), formerly the AQTF standards, require RTOs to systematically validate assessments.
15.5 Assessment including Recognition of Prior Learning (RPL):
(a) meets the requirements of the relevant Training Package or VET accredited course; and
(b) is conducted in accordance with the principles of assessment and the rules of evidence; and
(c) meets workplace and, where relevant, regulatory requirements; and
(d) is systematically validated.
Ambition in Action
www.sit.nsw.edu.au
Industry Engagement about Assessment
/ The Australian Vocational Education and Training system is “industry-led”. Industry engagement is built into the VET system at a number of levels.
For example: / Training Package Development: Industry Skills Councils
establish industry led committees to ensure that Training Packages are developed and amended to reflect the needs of industry.
Ambition in Action
www.sit.nsw.edu.au
NVR Standards for the operation of RTOs/ The new Standards for nationally regulated RTOs (the SNRs), formerly the
AQTF standards, require RTOs to engage effectively with industry in the preparation of their delivery and assessment strategies, and the development and validation of assessment tools.
Standard 15.3 states:
/ Staff, facilities, equipment and training and assessment materials .... are consistent with the requirements of the Training Package or VET accredited course and ... training and assessment strategies and are developed through effective consultation with industry.
Standard 16.4 states:
/ Employers and other parties who contribute to each learner’s training and assessment are engaged in the development, delivery and monitoring of training and assessment.
Ambition in Action
www.sit.nsw.edu.au
So who is “Industry”?
/ The former National Quality Council (now known as National Skills Standards Council - NSSC) describes industry as “including, but not limited to, business owners and employers and their representative bodies, employees and unions, and their representative bodies”. (NQC Training Package Glossary, 2009). In our context, industry also includes community organisations, government departments and other RTOs.
Ambition in Action
www.sit.nsw.edu.au
What are the advantages of validation?
/ Consistency of interpretation of competency standards and benchmarks
/ Continuous improvement/ Builds confidence in VET products/ Customer service/ Compliance
Ambition in Action
www.sit.nsw.edu.au
What do we validate?
/ assessment methods / assessment tools / assessment procedures / assessment decisions
High Risk Units first
Ambition in Action
www.sit.nsw.edu.au
Underpinning Knowledge When Validating
/ Principles of Assessment / Rules of Evidence/ Employability skills/ AQF standards/ Training Package/units competence
Ambition in Action
www.sit.nsw.edu.au
Principles of Assessment/ Validity - The process assesses what it claims to assess. Validity requires that:
/ assessment against the units of competency / assessment of knowledge and skills must be integrated with their practical application/ judgement of competence must be based on sufficient evidence.
/ Flexibility – To be flexible, assessment should: reflect the candidate’s needs, provide for recognition of competencies no matter how, where or when they have been acquired, draw on a range of methods appropriate to the context, competency and the candidate.
/ Fairness - Fairness in assessment requires: consideration of the individual candidate’s needs and characteristics and any reasonable adjustments that should be applied.
/ Reliability - Refers to the consistency of the interpretation of evidence and the consistency of assessment outcomes. Reliability requires a standard benchmark of assessor competence and relevant vocational competence.
Ambition in Action
www.sit.nsw.edu.au
Rules of Evidence/ Validity - The process assesses what it claims to assess. Validity requires that:
/ assessment against the units of competency / assessment of knowledge and skills must be integrated with their practical application/ judgement of competence must be based on sufficient evidence.
/ Currency - Relates to the age of collected evidence. Competency requires demonstration of current performance.
/ Sufficiency - Relates to the amount of evidence collected.
/ Authenticity - Relates to ensuring the evidence is from or of the candidate and not another person.
Ambition in Action
www.sit.nsw.edu.au
Employability skills
/ Employability skills are the non-technical skills and knowledge necessary for effective participation in the workforce, and can include skills such as communication, self-management, problem solving and teamwork. They are also sometimes referred to as generic skills, capabilities, enabling skills or key competencies.
Ambition in Action
www.sit.nsw.edu.au
AQF Qualifications
/ The Australian Qualifications Framework (AQF) is the national policy for regulated qualifications in Australian education and training. It incorporates the qualifications from each education and training sector into a single comprehensive national qualifications framework.
Ambition in Action
www.sit.nsw.edu.au
AQF Qualifications
Ambition in Action
www.sit.nsw.edu.au
The future of assessment
/ all new training packages assessments work-based or simulated environment
/ COAG directions external validation
Ambition in Action
www.sit.nsw.edu.au
Clustering
/ Clustering units that combine to form an integrated work activity/task.
/ Clustering generic elements across units / Clustering common themes across units
Ambition in Action
www.sit.nsw.edu.au
Assessment Design
Ambition in Action
www.sit.nsw.edu.au
Tips - designing quality assessments
Visualise a competent person in the workplace
Ambition in Action
www.sit.nsw.edu.au
Dimensions of competency/ Task skills
Performing the task/job to the required standard./ Task management skills (variables)
Able to do more than one thing at a time and managing the tasks correctly.
/ Contingency management skillsResponding appropriately to irregularities and breakdowns in routine within a job or workplace.
/ Job/role environment skills (outcomes)Able to deal with the responsibilities and expectations of the work environment.
Ambition in Action
www.sit.nsw.edu.au
Examples Assessment methods
/ Observation/ Questioning/ Portfolios/ Work samples/ Third party feedback/ Simulations, role plays/ Presentations/ Self assessment
Ambition in Action
www.sit.nsw.edu.au
Mapping
What is mapping?
Why do you need to do this?
The Steps in Mapping.1. Analyse the Unit of competency
2. Select the assessment tool
3. Map the components of the UOC to the assessment tools chosen
Ambition in Action
www.sit.nsw.edu.au
Analyse the Unit of CompetenceThe following diagram shows the range of information taken into account at this stage of the development process:
Ambition in Action
www.sit.nsw.edu.au
How to identify assessment methods or evidence gathering techniques
Ambition in Action
www.sit.nsw.edu.au
Sample Mapping Document
Ambition in Action
www.sit.nsw.edu.au
Ambition in Action
www.sit.nsw.edu.au
Assessment Task
Parts of Unit Assessed
E=element, PC = perf criteria
Part of Unit Assessed
S =Skills and K=knowledge
Evidence Guide
CA=
Critical Aspects
Simulated case study and written or verbal questions.
E1 PC 1.2, 1.3, 1.4, 1.5E2 PC 2.1, 2.2, 2.3E3 PC 3.1, 3.2, 3.3, 3.4, 3.5, 3.6E4 PC 4.3, 4.4E5 PC 5.1, 5.2
K1-K4
K5-K6
CA2
CA1
Workplace observation or simulated observation
E2 PC 2.1, 2.2, 2.3E3 PC 3.1, 3.2, 3.3, 3.4E4 PC 4.1, 4.2, 4.4, 4.5
K1-K6
S1-s4
CA1
CA2
Questioning E1 PC 1.2, 1.3, 1.4, 1.5 K1-K4
K5-K6
CA2
Ambition in Action
www.sit.nsw.edu.au
Streamlining
/ Streamlining / Refining Assessment Validation/ less forms
Assessment Validation Checklist
This checklist is to be used as a guide when validating assessments. This checklist should be used as part of the assessment validation meeting. This document should be kept as part of the record of evidence of assessment validation.
Faculty name: Section name:
Qualification name and number: Course No:
Training package name and number:
Unit name and number:
Pre Assessment Use this checklist as part of an assessment validation meeting to evaluate assessment tools, tasks or strategies that you have developed
Principles of assessment are required to ensure quality outcomes. Assessments should be fair, flexible, valid and reliable as follows:
Validity means that the evidence relates to the unit competency, addresses essential skills and knowledge, dimensions of competency and employability skills.
Reliability means that the assessment tool and process will produce consistent outcomes when applied by a range of assessors in a range of contexts.
Fairness means that the assessment will not disadvantage any person and will take into account the characteristics of the person being assessed.
Flexibility means that the assessment tool and process allows for assessment in a range of assessment contexts.
Assessment Activity Yes Comments The evidence requested is benchmarked against the current Training Package or Curriculum Document
The assessment task is based on current workplace activities and contexts (industry/ legislative currency)
The assessments is fair, flexible, valid and reliable
The level of difficulty is appropriate to the outcomes (performance criteria) being assessed and sufficient time is allocated
The instructions to the assessors are clear, concise and accurate to ensure consistent, reliable and fair results for all candidates
The instructions to the candidates are clear and sufficient, including task requirements, time allowed and additional aids allowed
The assessment tool is suitable for use in other assessment contexts eg, recognition, trainees, workplace
Reasonable adjustment can be made to the assessment strategy to allow for candidates with special needs
The assessment tool documentation includes a cover page with Sydney Institute logo, section name, course name/no, unit/module names/numbers and assessment event name
The assessment is written in plain English
Version control policy has been followed
Comments:
Assessment Validation Record
This form is used for validating assessments. This coversheet is to be attached to each validated assessment and stored in appropriate faculty/section team share folder or dedicated local storage location. Where modification is required a revised assessment tool is also to be attached.
Faculty name: Section name:
Qualification name and number: Course No:
Training package name and number:
Units (List below individual Units or Clusters of Units to be validated both core & elective )
Units (name and number)
Learning outcomes /elements
(from Training package)
Category of
Validation
Assessment validation outcome
Modification required
Completion
date
Location of documentation
1 Select
2
3
Comments: Faculty Assessment Validation Team: LTV (Lead Team validator) name:
Position: Validator category and organisation name: Select Signature: Date
TVM 1 (Team Validation Member) name:
Position: Validator category and organisation name: Select Signature: Date
TVM 2 (Team Validation Member) name:
Position: Validator category and organisation name: Select Signature: Date
Ambition in Action
www.sit.nsw.edu.au
Under Review
Ambition in Action
www.sit.nsw.edu.au
For more information follow the links
/ Competency Based Assessment Publications/ Training Packages @ Work/ Training.gov.au
top related