arm cortex-m3 / arm7 product catalog 2012 et-nxp arm kit lpc1769 et-nxp arm … · 2012-02-17 ·...

บริษัท อีทีที จำกัดETT CO., LTD.

Company reserves the right to change the detail and price of any productwithout any prior notice.

Tel : +66 (0) 2-7121120 Fax : +66 (0) 2-3917216e-mail : sale@etteam.com www.etteam.com

ARM Cortex-M3 / ARM7 Product Catalog 2012El

ec

troni

cs

Tec

hno

log

y Te

am

27w

ww

.ette

am

.co

m

(P-ET-A-00453)ET-NXP ARM KIT LPC1769

(P-ET-A-00409)ET-NXP ARM KIT LPC1768

(P-ET-A-00454)ET-NXP ARM KIT LPC1769 & TFT LCD

(P-ET-A-00410)ET-NXP ARM KIT LPC1768 & TFT LCD

2 3

new

This is the ultimate ARM Board from NXP Company that includes many devices such as ETHERNET LAN, USB 2.0, USB HOST, SD CARD, RS232, TFT

LCD, 5-DIRECTIONAL JOY SWITCH and etc. There are 4 versions with 2 MCU as follows;

1. ET-NXP ARM KIT LPC1769 2. ET-NXP ARM KIT LPC1768

3. ET-NXP ARM KIT LPC1769 & TFT LCD 4. ET-NXP ARM KIT LPC1768 & TFT LCD

All of 4 versions have the same board and standard devices as follows;

• IN-SYSTEM PROGRAMING (ISP) and IN-APPLICATION PROGRAM (IAP) through ON-CHIP BOOT-LOADER through PORT RS232, it is

unnecessary to purchase any COPY PROGRAMMER.

• 20PIN PORT JTAG ARM Standard for REAL TIME DEBUGGER • ETHERNET LAN 10/100MB by using Connector 1-CH RJ45

• SD CARD Interface(MICRO SD) • PORT USB 2.0 FULL SPEED by using Connector TYPE B ON BOARD

• 2-CH 4PIN ETT PORT RS232 • 5-DIRECTIONAL JOY SWITCH

• Adjustable VR 10K as R for testing Circuit A TO D • LED to display status of 8-OUTPUT, 1-TACT SW, 1-MINI SPEAKER

• USB HOST TYPE A • RTC(internal MCU) with X™TAL 32.768KHz and BATTERY BACKUP

• AVAILABLE 22BIT GPIO for various application such as D/A, I2C, I

2S, CAN and INPUT/OUTPUT (it can interface with I/O 5V)

• 10PIN HEADER P2(0-7) for GPIO or FULL-DUPLEX SERIAL UART • 3PIN HEADER P0(26) for GPIO or D/A

• 3PIN HEADER P4(29) for GPIO • 4PIN HEADER P0(19-20) for GPIO or I2C BUS

• 4PIN HEADER P0(0-1) and P0(4-5) for GPIO or CAN 1 and CAN2 BUS

• 5PIN HEADER P0(23-25) and P2(11-13) for GPIO and I2S-RX and I

2S-TX

• 5VDC/850mA POWER SUPPLY for board (it is compatible with šET-SWITCHING ADAPTER 5V 1.2A TYPE B› (A-A-A-00079) *170.-); it uses 2PIN

Connector or it uses POWER SUPPLY from USB CONNECTOR TYPE B

• PCB SIZE: 15.3 x 9 cm.

• All 4 board versions consist ofˆ

1. Board

2. CD-ROM User™s Manual and Example Programs

3. Cable DOWNLOAD ET-RS232 DB 9 PIN

• MCU ARM CORTEX M3 No.LPC1769 that is 32BIT and 100PIN (TQFP)

with 512KB FLASH MEMORY, 64KB RAM, A TO D 12 BIT, D TO A 10 BIT

and etc.

• X™ TAL 12.00MHz for Phase-Locked-Loop and it can run at the maximum

frequency of 120MHz

• Part of standard devices on board

• (Can purchase and install šBoard ET-TFT240320TP-3.2 REV.B›

into this board; in this case, it installs more CONNECTOR 2x20 and 1x20)

ET-NXP ARM KIT LPC1769 consists of ˆ

• ET-NXP ARM KIT LPC1769

• TFT COLOR LCD with TOUCH SCREEN 240x320 PIXEL, 32" wide

Screen, and 65536 Colored Resolution

• CHIP TOUCH SCREEN CONTROLLER No.ADS7846 (ON BOARD)

ET-NXP ARM KIT LPC1769 & TFT LCD consists of ˆ

• MCU ARM CORTEX M3 No.LPC1768 that is 32BIT and 100PIN (TQFP)

with 512KB FLASH MEMORY, 64KB RAM, A TO D 12 BIT, D TO A 10 BIT

and etc

• X™TAL 12.00MHz for Phase-Locked-Loop and it can run at the maximum

frequency of 100MHz

• Part of standard devices on board

• (Can purchase and install š Board ET-TFT240320TP-3.2 REV.B › into this

board; in this case, it installs more CONNECTOR 2x20 and 1x20)

ET-NXP ARM KIT LPC1768 consists of ˆ

• ET-NXP ARM KIT LPC1768

• TFT COLOR LCD with TOUCH SCREEN 240x 320PIXEL, 32" wide

Screen, and 65536 Colored Resolution

• CHIP TOUCH SCREEN CONTROLLER No.ADS7846 (ON BOARD)

ET-NXP ARM KIT LPC1768 & TFT LCD consists of ˆ

new