alid bc hydro l box - valid manufacturing toll free phone: 888-632-6477 phone 250-832-6477 fax:...
TRANSCRIPT
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
BCMThe BCM enclosure is designed to comply with BC Hydro distribution standards for underground wiring to main feeds. The two piece design allows for right and left configurations with one part number. The open bottom allows easy access for BC Hydro feeder cables.
BC HYDRO "L" BOX
Features/Specifications
• 14 Gauge galvanized steel construction• Two piece design allows right or left configuration• Open bottom• For 200, 400, 600 and 800A services
PART NUMBER SWITCH SIZE A B C D E
BCM-200 200A 48" 24" 30" 48" 72"
BCM-400 400A 62" 24" 30" 48" 86"
BCM-600 600-800A 62" 30" 36" 54" 92"
19902-16991
B
A
18 C
D 1 TYP.
1 TYP.
A A
FRONT VIEW(COVERS REMOVED)
ISOMETRIC VIEWLEFT CONFIGURATION
12
E
SIDE VIEW
16
10
1 TYP.
16
10
1 TYP.
SECTION A-A
ISOMETRIC VIEWRIGHT CONFIGURATION
BOTTOM VIEW
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
CIPS
CAST-IN-PLACE SIDEWALK MOUNT CABINET
19911-12991
This cast-in-place box is used in applications for installation in sidewalks where power, distribution and controls are required in an aesthetically appealing environment.
Features/Specifications
• Aluminum construction• CSA Type 3R rated• Used for sidewalk or wall mounting• 1/4”thickscrewdownlidwithflushscrews• Breaker protection outlet• Stainless Steel hardware• Powder coated to suit• ETLcertifiedtoapplicableCSAandULstandards
Options
• Engraved lid• Security screws• Back panel• Ground studs
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 40
www.validmanufacturing.comCIPS
This cast-in-place box is used in applications for installation in sidewalks where power, distribution and controls are required in an aesthetically appealing environment.
Features• Aluminumconstruction• NEMA3Rrated• Usedforsidewalkorwallmounting• 1/4”thicklidwithfl ush screws• Screwdownlid• Breakerprotectedoutlet• Stainlesssteelhardware• Powdercoatedtosuit
Specifi cations• ETLcertifi ed to applicable CSA and
UL standards
Options• Engravedlid• Securityscrews• Backpanel• Groundstuds
Benefi ts
This waterproof cast-in-place design enables convenient access to electrical points in a fl ush-mount designed enclosure.
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 41
PO
WE
R
DIS
TR
IBU
TIO
N
W
D
FRONT VIEW
H
SIDE VIEW
TOP VIEW
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
CIPS121204 12” 12” 4” ALUMINUMCIPS121207 12” 12” 7” ALUMINUMCIPS180807 18” 8” 7” ALUMINUMCIPS181207 18” 12” 7” ALUMINUM
FORADDITIONALOPTIONSCONSULTFACTORY
CIPSwww.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 41
PO
WE
R
DIS
TR
IBU
TIO
N
WD
FRONT VIEW
H
SIDE VIEW
TOP VIEW
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
CIPS121204 12” 12” 4” ALUMINUMCIPS121207 12” 12” 7” ALUMINUMCIPS180807 18” 8” 7” ALUMINUMCIPS181207 18” 12” 7” ALUMINUM
FORADDITIONALOPTIONSCONSULTFACTORY
CIPS
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
CIPW
CAST-IN-PLACE WALL MOUNT DISTRIBUTION CABINET
19911-12991
This cast-in-place box is used in applications for installation in concrete walls where power, distribution and controls are required in an aesthetically appealing environment. The flush-mount design enables safe, clean installation and the lockout tab ensures additional security.
Features/Specifications
• Aluminum construction• CSA Type 3R rated• Cast-in-place design• Used for wall mounting• Flush-mount design• Flip door design with tooled entry style latch• Breaker protected outlet• Power distribution lugs for loop feeders• Detailed installation instructions included• 120/240V single phase• 10kAIC rated
Options
• Multiple receptacle configurations• Padlock tad• Flasher controls• Up to 22kAIC rated breakers• Alternate latch types
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 38
www.validmanufacturing.comCIPW
This cast-in-place box is used in applications for installation in concrete walls where power, distribution and controls are required in an aesthetically appealing environment. The fl ush-mount design enables safe clean installation, and the lockout tab ensures additional security.
Features• Aluminum construction• NEMA 3R rated• Cast-in-place design• Used for wall mounting• Flush-mount design• Flip door design with tooled entry style
latch• Breaker protected outlet• Power distribution lugs for loop
feeders• Detailed installation instructions in
each enclosure
Specifi cations• 120/240 VAC 1 phase • ETL certifi ed to applicable CSA and
UL standards• 10,000 AIR
Optional Components• Multiple receptacle confi gurations• Padlock tab• Flasher controls• Up to 22 kAIC rated breakers• Alternate latch types
Benefi ts
This cast-in-place design enables convenient access to electrical points in a fl ush mount designed enclosure. The padlock tab allows additional security.
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 39
PO
WE
R
DIS
TR
IBU
TIO
N
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL MAIN BREAKER RECEPTACLE
CIPW115 14” 6.5” 6.25” ALUMINUM 1-15A 1P 1-15A GFI DUPLEXCIPW215 14” 6.5” 6.25” ALUMINUM 2-15A 1P 2-15A GFI DUPLEXCIPW315 14” 6.5” 6.25” ALUMINUM 3-15A 1P 3-15A GFI DUPLEXCIPW120 14” 6.5” 6.25” ALUMINUM 1-20A 1P 1-20A GFI DUPLEX
CIPW220 14” 6.5” 6.25” ALUMINUM 2-20A 1P 2-20A GFI DUPLEX
CIPW320 14” 6.5” 6.25” ALUMINUM 3-20A 1P 3-20A GFI DUPLEX
CIPW130 14” 6.5” 6.25” ALUMINUM 1-30A 2P 1-30A 120/240V
CIPW150 14” 6.5” 6.25” ALUMINUM 1-50A 2P 1-50A 120/240V
FOR ADDITIONAL OPTIONS CONSULT FACTORY
CIPW
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 39
PO
WE
R
DIS
TR
IBU
TIO
N
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL MAIN BREAKER RECEPTACLE
CIPW115 14” 6.5” 6.25” ALUMINUM 1-15A 1P 1-15A GFI DUPLEXCIPW215 14” 6.5” 6.25” ALUMINUM 2-15A 1P 2-15A GFI DUPLEXCIPW315 14” 6.5” 6.25” ALUMINUM 3-15A 1P 3-15A GFI DUPLEXCIPW120 14” 6.5” 6.25” ALUMINUM 1-20A 1P 1-20A GFI DUPLEX
CIPW220 14” 6.5” 6.25” ALUMINUM 2-20A 1P 2-20A GFI DUPLEX
CIPW320 14” 6.5” 6.25” ALUMINUM 3-20A 1P 3-20A GFI DUPLEX
CIPW130 14” 6.5” 6.25” ALUMINUM 1-30A 2P 1-30A 120/240V
CIPW150 14” 6.5” 6.25” ALUMINUM 1-50A 2P 1-50A 120/240V
FOR ADDITIONAL OPTIONS CONSULT FACTORY
CIPW
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
CTC
CURRENT TRANSFORMER CABINETS
Features/Specifications
• Galvanizedsteeloraluminumconstruction• CSAType1rated• DesignedtoBCHydrodistributionstandards• Screwoncover• Sealingscrews• Backpan• Internalmountingholes
CTcabinetsareusedtometersinglephaseandthreephaseserviceswheretheCT’sarenotincludedwithinthemeterbase.Theseboxesaremanufacturedwitheithergalvanizedsteeloraluminumandcomewithsealingscrews,backpanformountingCT’sandinternalmountingholes.
H
W
FRONT VIEW(COVER REMOVED)
D
SIDE VIEW
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL SINGLE PHASE SERVICE
THREE PHASE SERVICE
CTCG30-16-8 30” 16” 8” GALVANIZEDSTEEL UPTO400A UPTO400A&BELOW300V
CTCA30-16-8 30” 16” 8” ALUMINUM UPTO400A UPTO400A&BELOW300V
CTCG42-18-16 42” 18” 16” GALVANIZEDSTEEL OVER400A OVER400ATO800A
CTCA42-18-16 42” 18” 16” ALUMINUM OVER400A OVER400ATO800A
CTCG42-36-24 42” 36” 24” GALVANIZEDSTEEL NOTUSED OVER800A
CTCA42-36-24 42” 36” 24” ALUMINUM NOTUSED OVER800A
19907-13991
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone: 250-832-6477Fax: 250-832-7746E-mail: [email protected]
EDP15This indoor CSA Type 12 rated enclosure is ideal for maintaining electrical devices in a dust-free environment. Its door gasket ensures that components stay clean and contaminant-free within.
Dust Proof Cabinet - Type 12
19905-15991
Features/Specifications
• Carbon steel construction• Powder coated PC 101 Grey• CSA Type 12 rated• Padlockable 3-point latch mechanism on door• Stainless steel piano hinge• Filtered louvers• Full galvanized backpanel
Optional Items
• Heater and thermostat• Fan and thermostat• Styrofoam insulation• Shelves• Security handle cover• Electric controls/power distribution• Custom powder coat colours
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 74
www.validmanufacturing.comEDP15
This indoor NEMA 12 rated enclosure is ideal for maintaining electrical devices in a dust-free environment. Its door gasket ensures that components stay clean and contaminant-free within.
Features• Carbon steel construction• Powder-coated ASA 61 Grey• NEMA 12 rated• Padlockable 3-point latch mechanism on
door• Stainless steel piano hinge• Filtered louvers• Full backpan
Specifi cations• ETL certifi ed to applicable CSA and UL
standards
Optional Components• Heater and thermostat• Fan and thermostat• Styrofoam insulation• Shelves• Security handle cover• Electrical controls/power distribution• Custom powder coat colours
Benefi ts
The EPD 15 enclosure can be produced in multiple sizes and confi gurations to suit your specifi c application. This cabinet is usually powder coated ASA 61 Grey but additional colours are available.
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone: 250-832-6477Fax: 250-832-7746E-mail: [email protected]
EDP16This indoor CSA Type 12 rated enclosure is similar to the EDP15 but with an overlapping doule door design. It is ideal for maintaining electrical devices in a dust-free environment, with its door gasket ensuring that components stay clean and contaminant-free within.
Double Door, Dust Proof Cabinet - Type 12
19905-15991
Features/Specifications
• Carbon steel construction• Powder coated PC 101 Grey• CSA Type 12 rated• Padlockable 3-point latch mechanism on door• Overlappingdoorconfigurationwithnocentermullion• Stainless steel piano hinge• Filtered louvers• Full galvanized backpanel
Optional Items
• Heater and thermostat• Fan and thermostat• Styrofoam insulation• Shelves• Security handle cover• Electric controls/power distribution• Custom powder coat colours
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 76
www.validmanufacturing.comEDP16
This indoor NEMA 12 rated enclosure is similar to the EDP 15 but with an overlapping double door design. It is ideal for maintaining electrical devices in a dust-free environment, with its door gasket ensuring that components stay clean and contaminant-free within.
Features• Carbon steel construction• Powder-coated ASA 61 Grey• NEMA 12 rated• Padlockable 3-point latch mechanism on
door• Overlapping door confi guration with no
center mullion• Stainless steel piano hinges• Full backpan
Specifi cations• ETL certifi ed to applicable CSA and UL
standards
Optional Components• Heater and thermostat• Fan and thermostat• Styrofoam insulation• Shelves• Security handle cover• Electrical controls/power distribution• Custom powder coat colours
Benefi ts
This is an example of the double door style of enclosure in our NEMA 12 family. Multiple sizes and confi gurations can be produced to suit your specifi c application. This cabinet is usually powder coated ASA 61 Grey but additional colours are available.
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
19901-17991
EWSC-FQX
FREESTANDING TYPE 4 ENCLOSURE
alid
For extreme environments where superior waterproof protection is required. Valid Manufacturing produces a full range of custom CSA Type 4 cabinets in multiple sizes, configurations, closures, and hinge assemblies. Our custom capabilities allow us to design and build the enclosure to your specifications.
Features/Specifications
• Steel construction• CSA Type 4 rated• Freestanding design with 12” mounting feet• Hinged door(s) with pour in place gasket• ¼-Turn latches for tooled entry• White steel backpanel• PC101 (ANSI 61) Grey powder coat finish
Options
• Padlockable shroud(s)• Meter window • Complete electrical integration• Door switch, light, thermostat, heater, insulation• Custom backpanel and sidepanel configurations• Custom sizes, mounting kits, and powder coat colours• Powder coated marine grade aluminum construction
*Use ‘-FQT’ suffix for triple door enclosures
PART NUMBER DOORS HEIGHT 1 WIDTH DEPTHEWSC482416-FQS SINGLE 48” 24” 16”EWSC483016-FQS SINGLE 48” 30” 16”EWSC483616-FQS SINGLE 48” 36” 16”EWSC484816-FQS SINGLE 48” 48” 16”EWSC602416-FQS SINGLE 60” 24” 16”EWSC603016-FQS SINGLE 60” 30” 16”EWSC603018-FQS SINGLE 60” 30” 18”EWSC603616-FQS SINGLE 60” 36” 16”EWSC603618-FQS SINGLE 60” 36” 18”EWSC604816-FQS SINGLE 60” 48” 16”EWSC604818-FQS SINGLE 60” 48” 18”EWSC606024-FQD DOUBLE 60” 60” 24”EWSC607224-FQD DOUBLE 60” 72” 24”EWSC607230-FQD DOUBLE 60” 72” 30”EWSC608424-FQD DOUBLE 60” 84” 24”EWSC608430-FQD DOUBLE 60” 84” 30”EWSC724818-FQS SINGLE 72” 48” 18”EWSC726024-FQD DOUBLE 72” 60” 24”EWSC727224-FQD DOUBLE 72” 72” 24”EWSC727230-FQD DOUBLE 72” 72” 30”EWSC728430-FQD DOUBLE 72” 84” 30”EWSC729630-FQD DOUBLE 72” 96” 30”EWSC844818-FQS SINGLE 84” 48” 18”EWSC846024-FQD DOUBLE 84” 60” 24”EWSC846030-FQD DOUBLE 84” 60” 30”EWSC847224-FQD DOUBLE 84” 72” 24”EWSC847230-FQD DOUBLE 84” 72” 30”EWSC848424-FQD DOUBLE 84” 84” 24”EWSC848430-FQD DOUBLE 84” 84” 30”EWSC849630-FQD DOUBLE 84” 96” 30”EWSC967224-FQD DOUBLE 96” 72” 24”EWSC968436-FQD DOUBLE 96” 84” 36”EWSC969636-FQD DOUBLE 96” 96” 36”
1 Dimensions do not include 12” mounting feet
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
19901-17991
EWSC-WQX
Wallmount tYPE 4 EnCloSuRE
alid
For extreme environments where superior waterproof protection is required. Valid Manufacturing produces a full range of custom CSA Type 4 cabinets in multiple sizes, configurations, closures, and hinge assemblies. Our custom capabilities allow us to design and build the enclosure to your specifications.
Features/Specifications
• Steel construction• CSA Type 4 rated• Wallmount design• Hinged door(s) with pour in place gasket• ¼-Turn latches for tooled entry• White steel backpanel• PC101 (ANSI 61) Grey powder coat finish
Options
• Padlockable shroud(s)• Meter window • Complete electrical integration• Door switch, light, thermostat, heater, insulation• Custom backpanel and sidepanel configurations• Custom sizes, mounting kits, and powder coat colours• Powder coated marine grade aluminum construction
*Use ‘-WQT’ suffix for triple door enclosures
PaRt numBER DooRS HEIGHt WIDtH DEPtHEWSC121206-WQS SINGLE 12” 12” 6”EWSC121208-WQS SINGLE 12” 12” 8”EWSC181206-WQS SINGLE 18” 12” 6”EWSC181208-WQS SINGLE 18” 12” 8”EWSC181806-WQS SINGLE 18” 18” 6”EWSC181808-WQS SINGLE 18” 18” 8”EWSC241808-WQS SINGLE 24” 18” 8”EWSC241810-WQS SINGLE 24” 18” 10”EWSC242408-WQS SINGLE 24” 24” 8”EWSC242410-WQS SINGLE 24” 24” 10”EWSC242412-WQS SINGLE 24” 24” 12”EWSC302408-WQS SINGLE 30” 24” 8”EWSC302410-WQS SINGLE 30” 24” 10”EWSC302412-WQS SINGLE 30” 24” 12”EWSC303008-WQS SINGLE 30” 30” 8”EWSC303010-WQS SINGLE 30” 30” 10”EWSC303012-WQS SINGLE 30” 30” 12”EWSC303016-WQS SINGLE 30” 30” 16”EWSC363012-WQS SINGLE 36” 30” 12”EWSC363016-WQS SINGLE 36” 30” 16”EWSC363612-WQS SINGLE 36” 36” 12”EWSC363616-WQS SINGLE 36” 36” 16”EWSC423612-WQS SINGLE 42” 36” 12”EWSC423616-WQS SINGLE 42” 36” 16”EWSC424212-WQD DOUBLE 42” 42” 12”EWSC424216-WQD DOUBLE 42” 42” 16”EWSC424220-WQD DOUBLE 42” 42” 20”EWSC484212-WQD DOUBLE 48” 42” 12”EWSC484216-WQD DOUBLE 48” 42” 16”EWSC484220-WQD DOUBLE 48” 42” 20”EWSC484812-WQD DOUBLE 48” 48” 12”EWSC484816-WQD DOUBLE 48” 48” 16”EWSC484820-WQD DOUBLE 48” 48” 20”
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
19901-17991
EWSS-FQX
FREESTANDING TYPE 4X ENCLOSURE
alid
For extreme environments where superior corrosion and waterproof protection is required. Valid Manufacturing produces a full range of custom CSA Type 4X cabinets in multiple sizes, configurations, closures, and hinge assemblies. Our custom capabilities allow us to design and build the enclosure to your specifications.
Features/Specifications
• 304 (#4) stainless steel construction• CSA Type 4X rated• Freestanding design with 12” mounting feet• Hinged door(s) with pour in place gasket• ¼-Turn latches for tooled entry• White steel backpanel• Natural finish
Options
• Padlockable shroud(s)• Meter window • Complete electrical integration• Door switch, light, thermostat, heater, insulation• Custom backpanel and sidepanel configurations• Custom sizes, mounting kits, and powder coat colours• Powder coated marine grade aluminum construction
*Use ‘-FQT’ suffix for triple door enclosures
PART NUMBER DOORS HEIGHT 1 WIDTH DEPTHEWSS482416-FQS SINGLE 48” 24” 16”EWSS483016-FQS SINGLE 48” 30” 16”EWSS483616-FQS SINGLE 48” 36” 16”EWSS484816-FQS SINGLE 48” 48” 16”EWSS602416-FQS SINGLE 60” 24” 16”EWSS603016-FQS SINGLE 60” 30” 16”EWSS603018-FQS SINGLE 60” 30” 18”EWSS603616-FQS SINGLE 60” 36” 16”EWSS603618-FQS SINGLE 60” 36” 18”EWSS604816-FQS SINGLE 60” 48” 16”EWSS604818-FQS SINGLE 60” 48” 18”EWSS606024-FQD DOUBLE 60” 60” 24”EWSS607224-FQD DOUBLE 60” 72” 24”EWSS607230-FQD DOUBLE 60” 72” 30”EWSS608424-FQD DOUBLE 60” 84” 24”EWSS608430-FQD DOUBLE 60” 84” 30”EWSS724818-FQS SINGLE 72” 48” 18”EWSS726024-FQD DOUBLE 72” 60” 24”EWSS727224-FQD DOUBLE 72” 72” 24”EWSS727230-FQD DOUBLE 72” 72” 30”EWSS728430-FQD DOUBLE 72” 84” 30”EWSS729630-FQD DOUBLE 72” 96” 30”EWSS844818-FQS SINGLE 84” 48” 18”EWSS846024-FQD DOUBLE 84” 60” 24”EWSS846030-FQD DOUBLE 84” 60” 30”EWSS847224-FQD DOUBLE 84” 72” 24”EWSS847230-FQD DOUBLE 84” 72” 30”EWSS848424-FQD DOUBLE 84” 84” 24”EWSS848430-FQD DOUBLE 84” 84” 30”EWSS849630-FQD DOUBLE 84” 96” 30”EWSS967224-FQD DOUBLE 96” 72” 24”EWSS968436-FQD DOUBLE 96” 84” 36”EWSS969636-FQD DOUBLE 96” 96” 36”
1 Dimensions do not include 12” mounting feet
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
19901-17991
EWSS-WQX
Wallmount tYPE 4X EnCloSuRE
alid
For extreme environments where superior corrosion and waterproof protection is required. Valid Manufacturing produces a full range of custom CSA Type 4X cabinets in multiple sizes, configurations, closures, and hinge assemblies. Our custom capabilities allow us to design and build the enclosure to your specifications.
Features/Specifications
• 304 (#4) stainless steel construction• CSA Type 4X rated• Wallmount design• Hinged door(s) with pour in place gasket• ¼-Turn latches for tooled entry• White steel backpanel• Natural finish
Options
• Padlockable shroud(s)• Meter window • Complete electrical integration• Door switch, light, thermostat, heater, insulation• Custom backpanel and sidepanel configurations• Custom sizes, mounting kits, and powder coat colours• Powder coated marine grade aluminum construction
*Use ‘-WQT’ suffix for triple door enclosures
PaRt numBER DooRS HEIGHt WIDtH DEPtHEWSS121206-WQS SINGLE 12” 12” 6”EWSS121208-WQS SINGLE 12” 12” 8”EWSS181206-WQS SINGLE 18” 12” 6”EWSS181208-WQS SINGLE 18” 12” 8”EWSS181806-WQS SINGLE 18” 18” 6”EWSS181808-WQS SINGLE 18” 18” 8”EWSS241808-WQS SINGLE 24” 18” 8”EWSS241810-WQS SINGLE 24” 18” 10”EWSS242408-WQS SINGLE 24” 24” 8”EWSS242410-WQS SINGLE 24” 24” 10”EWSS242412-WQS SINGLE 24” 24” 12”EWSS302408-WQS SINGLE 30” 24” 8”EWSS302410-WQS SINGLE 30” 24” 10”EWSS302412-WQS SINGLE 30” 24” 12”EWSS303008-WQS SINGLE 30” 30” 8”EWSS303010-WQS SINGLE 30” 30” 10”EWSS303012-WQS SINGLE 30” 30” 12”EWSS303016-WQS SINGLE 30” 30” 16”EWSS363012-WQS SINGLE 36” 30” 12”EWSS363016-WQS SINGLE 36” 30” 16”EWSS363612-WQS SINGLE 36” 36” 12”EWSS363616-WQS SINGLE 36” 36” 16”EWSS423612-WQS SINGLE 42” 36” 12”EWSS423616-WQS SINGLE 42” 36” 16”EWSS424212-WQD DOUBLE 42” 42” 12”EWSS424216-WQD DOUBLE 42” 42” 16”EWSS424220-WQD DOUBLE 42” 42” 20”EWSS484212-WQD DOUBLE 48” 42” 12”EWSS484216-WQD DOUBLE 48” 42” 16”EWSS484220-WQD DOUBLE 48” 42” 20”EWSS484812-WQD DOUBLE 48” 48” 12”EWSS484816-WQD DOUBLE 48” 48” 16”EWSS484820-WQD DOUBLE 48” 48” 20”
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PMC1
POLE MOUNT CABINETS - SINGLE SIDED
19911-12991
This pole mount cabinet is used by Ministry of Transportation British Columbia and meet all requirements for road and street side controls.
Features/Specifications
• Marine-grade aluminum construction• CSA Type 3R rated• Powder coated PC 101 Grey• Padlockable 3-point latch mechanism on door• Door stays• Slanted roof to repel rain, ice and snow• Full galvanized backpanel• Filtered louvers• Pole mounting hole on back• Adjustable pole mounting brackets• MOTBC approved• All mounting hardware included
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 53
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
35.0
889
23.5 597
22.5 572
A A
FRONT VIEW(DOOR REMOVED)
19.8
504
16.0
406
B
C C
SECTION A-A
DETAIL B
20.1 511
30.0
762
SECTION C-C(BACK PANEL DETAIL) ROTATED ISOMETRIC VIEW
PART NUMBER HEIGHT WIDTH DEPTH MATERIALPMC1A 35” 22.5” 16” ALUMINUM
ADDITIONAL OPTIONSHEATER AND THERMOSTATFAN AND THERMOSTATLIGHTS AND DOOR SWITCHINSULATEDSIDE PANELSSINGLE ADJUSTABLE SHELFSIDE MOUNTSFENCE MOUNT
PMC1
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 52
www.validmanufacturing.comPMC1
This pole mount cabinet is used by Ministry of Transportation British Columbia and meets all requirements for road and street side controls
Benefi ts
This cabinet is designed to fi ll the specialty needs for overhead bridge signs, camera controls, cellular signs and other communication control stations. It is usually powder coated ASA 61 Grey but additional colours are available.
A variety of mounting brackets offer easy installation to any size pole.
Features• Marine-grade aluminum construction• Powder-coated ASA 61 Grey• NEMA 3R rated• Padlockable 3-point latch mechanism on
door• Door stays• Slanted roof to repel rain, ice and snow• Complete backpan• Filtered louvers• Pole mounting holes on back• Adjustable pole mounting brackets• All mounting hardware included
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• MOTBC approved• 1/8” marine-grade aluminum construction
Optional Components• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched backpan• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
Options
• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC1A 35" 22.5" 16" ALUMINUM
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PMC11
POLE MOUNT CABINETS - DOUBLE SIDED
19911-12991
This pole mount cabinet series is available in two standard sizes, and has a 4 post 19” rack complete with front and rear doors for easy access. It is used for telecommunications and applications where there is a requirement for large rack mounted devices.
Features/Specifications
• Marine-grade aluminum construction• CSA Type 3R rated• Powder coated PC 101 Grey• Padlockable 3-point latch mechanism on door• Door stays• Slanted roof to repel rain, ice and snow• Filtered louvers• Adjustable pole mounting brackets• MOTBC approved• All mounting hardware included
Options
• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched backpanel• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 58
www.validmanufacturing.comPMC11
This pole mount cabinet series is available in two standard sizes, and has a 4 post 19” rack complete with front and rear doors for easy access. It is used for telecommunications and applications where there is a requirement for large rack mounted devices.
Benefi ts
The 19” rack in this cabinet allows mounting of any standard electronic components, and the rear door provides access from the back as well as the front. The painted enclosures come standard ASA 61 grey but can be custom powder coated in any colour.
The adjustable mounting bracket allows installation to any size pole.
Features• Marine-grade aluminum construction• Powder-coated ASA 61 Grey• NEMA 3R rated• Padlockable 3-point latch mechanism on
front and rear door• Hidden hinges for added security• Door stays• Slanted roof to repel rain, ice and snow• 19” 4 post rack• Filtered louvers• Threaded holes for pole access wiring• Adjustable pole mounting brackets• All mounting hardware included
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• 1/8” marine-grade aluminum construction
Optional Components• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched back pan• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC11A-302432 30" 24" 32" ALUMINUM
PMC11A-442424 44” 24” 24” ALUMINUM
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 59
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
D
HA A
FRONT VIEW
W
SIDE VIEWSIDE VIEW(DOOR REMOVED)
B
SECTION A-ADETAIL B
PART NUMBER HEIGHT WIDTH DEPTH MATERIALPMC11A-302432 30” 24” 32” ALUMINUMPMC11A-442424 44” 24” 24” ALUMINUM
ADDITIONAL OPTIONSHEATER AND THERMOSTATFAN AND THERMOSTATLIGHTS AND DOOR SWITCHINSULATEDSIDE PANELSADJUSTABLE SHELFFOLD DOWN LAPTOP SHELF
PMC11
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PMC12
POLE MOUNT CABINETS - SINGLE SIDED, LARGE
19911-12991
This cabinet is an extension to the PMC1 family, providing additional room to house equipment such as traffic ITS components.
Features/Specifications
• Marine-grade aluminum construction• CSA Type 3R rated• Powder coated PC 101 Grey• Padlockable 3-point latch mechanism on door• Door stays• Slanted roof to repel rain, ice and snow• Full galvanized backpanel• Filtered louvers• Adjustable pole mounting brackets• MOTBC approved• All mounting hardware included
Options
• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched backpanel• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 60
www.validmanufacturing.comPMC12
This cabinet is an extension to the PMC1 family, providing additional room to house equipment such as traffi c ITS components.
Benefi ts
This cabinet is designed for electrical controls including overhead bridge signs, camera controls, cellular signs, traffi c ITS and other communication control stations. This cabinet is usually powder coated ASA 61 Grey but additional colours are available.
The adjustable mounting bracket allows installation to any size pole.
Features• Marine-grade aluminum construction• Powder-coated ASA 61 Grey• NEMA 3R rated• Padlockable 3-point latch mechanism on
door• Door stays• Slanted roof to repel rain, ice and snow• Complete backpan• Filtered louvers• Adjustable pole mounting brackets• All mounting hardware included
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• MOTBC approved• 1/8” marine-grade aluminum construction
Optional Components• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched back pan• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 61
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
60.1
1527
52.0
1321
25.0 635
29.0 737
28.0 711
A A
FRONT VIEW(DOOR REMOVED)
23.9
606
28.5
724
22.0
559
C
B B
SECTION A-ADETAIL B
55.3
1405
25.5 648
SECTION B-BBACK PANEL DETAIL
PART NUMBER HEIGHT WIDTH DEPTH MATERIALPMC12A 60” 28” 22” ALUMINUM
ADDITIONAL OPTIONSHEATER AND THERMOSTATFAN AND THERMOSTATLIGHTS AND DOOR SWITCHINSULATEDSIDE PANELSSINGLE ADJUSTABLE SHELFSIDE MOUNTSFENCE MOUNT
PMC12
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC12A 60" 28" 22" ALUMINUM
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PMC18
POLE MOUNT CABINET
19911-12991
This general purpose CSA Type 3R rated enclosure is an extension to the PMC family, and features a padlockable tab and key lock 1/4 turn latch. It is ideal for use outdoors as a control cabinet. This enclosure is available in a variety of custom sizes.
Features/Specifications
• 304 (#4) stainless, marine-grade aluminum or carbon steel construction
• Aluminum and steel enclosures are powder coated PC101 Grey
• CSA Type 3R rated• Keyed 1/4 turn latch on door• Padlock tab• Removable door• Full galvanized backpanel• Filtered louvers• Pole bracket designed for bolt or band-on installation
Options
• Multiplelatchingconfigurations• Styrofoam insulation• Shelves• Side panels• Fan and thernostat• Humidistat• Custom powder coat colours
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 62
www.validmanufacturing.comPMC18
The general purpose Type 3R enclosure is an extension to the PMC family, and features a padlockable tab and key lock 1/4 turn latch. It is ideal for use outdoors as a control cabinet. This enclosure is available in a variety of custom sizes.
Benefi ts
This enclosure has multiple weatherproofi ng features with a couple of them being a foam door seal to exclude moisture, dust and external elements; and a rain hood over the door to prevent ice buildup. The external hinges allow the door to swing over 180 degrees.
Features• 304 (#4) stainless, marine-grade
aluminum or carbon steel construction• Aluminum and steel enclosures are
powder-coated ASA 61 Grey• NEMA 3R rated• Keyed 1/4 turn latch on door• Padlock tab• Removable door• Complete backpan• Filtered louvers• Pole bracket desgined for bolt or band-on
installation
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• Aluminum enclosures are constructed
with 1/8” marine-grade
Optional Components• Multiple latching confi gurations• Styrofoam insulation• Shelves• Fan and thermostat• Humidistat• Custom powder coat colours
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 63
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
H
W
A A
FRONT VIEW(DOOR REMOVED)
D
B B
CSECTION A-A
SECTION B-B BACK PANEL DETAIL
DETAIL C
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC18A-121208 12” 12” 8” ALUMINUMPMC18S-121208 12” 12” 8” STAINLESS STEELPMC18C-121208 12” 12” 8” CARBON STEELPMC18A-161608 16” 16” 8” ALUMINUMPMC18S-161608 16” 16” 8” STAINLESS STEEL
PMC18C-161608 16” 16” 8” CARBON STEELPMC18A-202008 20” 20” 8” ALUMINUMPMC18A-202008 20” 20” 8” STAINLESS STEELPMC18A-202008 20” 20” 8” CARBON STEEL
PMC18
ADDITIONAL OPTIONS
INSULATEDSHELVESSIDE PANELSFAN AND THERMOSTAT
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 63
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
H
W
A A
FRONT VIEW(DOOR REMOVED)
D
B B
CSECTION A-A
SECTION B-B BACK PANEL DETAIL
DETAIL C
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC18A-121208 12” 12” 8” ALUMINUMPMC18S-121208 12” 12” 8” STAINLESS STEELPMC18C-121208 12” 12” 8” CARBON STEELPMC18A-161608 16” 16” 8” ALUMINUMPMC18S-161608 16” 16” 8” STAINLESS STEEL
PMC18C-161608 16” 16” 8” CARBON STEELPMC18A-202008 20” 20” 8” ALUMINUMPMC18A-202008 20” 20” 8” STAINLESS STEELPMC18A-202008 20” 20” 8” CARBON STEEL
PMC18
ADDITIONAL OPTIONS
INSULATEDSHELVESSIDE PANELSFAN AND THERMOSTAT
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PMC21
POLE MOUNT CABINET WITH FLIP LID
19911-12991
The PMC21 is a budget-sensitive general purpose CSA Type 3R rated enclosure. This cabinet features a padlockable flip-lid and has a removable backpanel. It is ideal for use outdoors as a junction box, pull box or other enclosure. Multiple custom sizes are available.
Features/Specifications
• 304 (#4) stainless, marine-grade aluminum or carbon steel construction
• Aluminum and steel enclosures are powder coated PC101 Grey
• CSA Type 3R rated• Padlockable flip-lid• Full galvanized backpanel• Pole bracket designed for bolt or band-on installation
Options
• Fan and thermostat• Humidistat• Louvers• Filtered louvers• Custom powder coat colours
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 64
www.validmanufacturing.comPMC21
The PMC21 is a budget-sensitive general purpose Type 3R enclosure. This cabinet features a padlockable fl ip-lid and has a removable back panel. It is ideal for use outdoors as a junction box, pull box or other enclosure. Multiple custom sizes are available.
Benefi ts
This is a cost effective outdoor 3R rated enclosure. With the universal mounting bracket it is suitable for a number of pole mounting applications.
Features• 304 (#4) stainless, marine-grade
aluminum or carbon steel construction• Aluminum and steel enclosures are
powder-coated ASA 61 Grey• NEMA 3R rated• Padlockable fl ip-lid• Complete backpan• Pole bracket desgined for bolt or band-on
installation
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• Aluminum enclosures are constructed
with 1/8” marine-grade
Optional Components• Fan and thermostat• Humidistat• Louvers• Filtered louvers• Custom powder coat colours
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 65
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
BACK PANEL
W
A
A
FRONT VIEW
H
D
SECTION A-A
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC21A-121208 12” 12” 8” ALUMINUMPMC21S-121208 12” 12” 8” STAINLESS STEELPMC21C-121208 12” 12” 8” CARBON STEELPMC21A-161608 16” 16” 8” ALUMINUMPMC21S-161608 16” 16” 8” STAINLESS STEEL
PMC21C-161608 16” 16” 8” CARBON STEELPMC21A-202008 20” 20” 8” ALUMINUMPMC21A-202008 20” 20” 8” STAINLESS STEELPMC21A-202008 20” 20” 8” CARBON STEEL
ADDITIONAL OPTIONS
HUMIDISTATLOUVERSFILTERED LOUVERSFAN AND THERMOSTAT
PMC21
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 65
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
BACK PANEL
W
A
A
FRONT VIEW
HD
SECTION A-A
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC21A-121208 12” 12” 8” ALUMINUMPMC21S-121208 12” 12” 8” STAINLESS STEELPMC21C-121208 12” 12” 8” CARBON STEELPMC21A-161608 16” 16” 8” ALUMINUMPMC21S-161608 16” 16” 8” STAINLESS STEEL
PMC21C-161608 16” 16” 8” CARBON STEELPMC21A-202008 20” 20” 8” ALUMINUMPMC21A-202008 20” 20” 8” STAINLESS STEELPMC21A-202008 20” 20” 8” CARBON STEEL
ADDITIONAL OPTIONS
HUMIDISTATLOUVERSFILTERED LOUVERSFAN AND THERMOSTAT
PMC21
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PMC6
POLE MOUNT CABINETS - SINGLE SIDED, MEDIUM
19911-12991
This pole mount cabinet is larger than the standard size for applications where additional room is required, such as housing for traffic ITS.
Features/Specifications
• Marine-grade aluminum construction• CSA Type 3R rated• Powder coated PC 101 Grey• Padlockable 3-point latch mechanism on door• Door stays• Hidden hinges for added security• Slanted roof to repel rain, ice and snow• Full galvanized backpanel• Filtered louvers• Threaded hole for pole access wiring• Adjustable pole mounting brackets• MOTBC approved• All mounting hardware included
Options
• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched backpanel• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 54
www.validmanufacturing.comPMC6
This pole mount cabinet is larger than the standard size for applications where additional room is required, such as housing for traffi c ITS.
Features• Marine-grade aluminum construction• Powder-coated ASA 61 Grey• NEMA 3R rated• Padlockable 3-point latch mechanism on
door• Recessed handle• Door stays• Hidden hinges for added security• Slanted roof to repel rain, ice and snow• Complete backpan and side panels• Convection ventilation with fi lters• Threaded hole for pole access wiring• Adjustable pole mounting brackets• All mounting hardware included
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• MOTBC approved• 1/8” marine-grade aluminum construction
Optional Components• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched backpan• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
Benefi ts
The size of the cabinet as well as the confi guration of the back and side panels allows a large amount of equipment to be installed in a compact area. Plus, increased security is provided by hidden hinges and a recessed handle. This cabinet is usually powder coated ASA-61 grey but additional colours are available.
The adjustable mounting bracket allows installation to any size pole.
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PMC6
POLE MOUNT CABINETS - SINGLE SIDED, MEDIUM
19911-12991
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 55
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
25.0 635
48.0
1219
39.9
1013
21.0 533
24.0 610
A A
FRONT VIEW(DOOR REMOVED)
18.1
460
16.0
406
CSECTION A-ADETAIL C
21.5 546
BACK PANEL
PART NUMBER HEIGHT WIDTH DEPTH MATERIALPMC6A 48” 24” 16” ALUMINUM
ADDITIONAL OPTIONSHEATER AND THERMOSTATFAN AND THERMOSTATLIGHTS AND DOOR SWITCHINSULATEDSINGLE ADJUSTABLE SHELF
PMC6
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL
PMC6A 48" 24" 16" ALUMINUM
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PWC
POLE & WALL MOUNT DISTRIBUTION CABINET
19911-12991
The PWC is a pole or wall mount weatherproof cabinet specifically sized to house 120/240V distribution panels and other electrical and control equipment. The padlockable flip style lid allows convenient access and security.
Features/Specifications
• Steel construction• CSA Type 3R rated • Powder coated PC101 Grey• Pole/wall mount design• Mounting rails inside for panels• Padlockable flip-lid• Bolt or band-on style brackets• Open bottom design• Stainless steel exterior hardware• Fits single phase 100A & 200A panels up to 24 cct.• Fits 3 phase 100A panels up to 32 cct.
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 80
www.validmanufacturing.comPWC
The PWC is a pole and wall mount weatherproof cabinet specifi cally sized to house 120/240V distribution panels and other electrical and control equipment. The padlockable fl ip style lid allows convenient access and security.
Features/Specifi cations
• Pole/wall mount design• 16 gauge steel construction• Powder coat ASA 61 Grey• NEMA 3R rated• Mounting rails inside for panels• Padlockable fl ip-lid• Bolt or band-on style brackets• Open bottom design• All exterior hardware stainless steel• Fits 1 phase 100A and 200A panels up to 24 cct.• Fits 3 phase 100A panels up to 32 cct.
PART NUMBER HEIGHT WIDTH DEPTH
PWC-01 29 1/2” 16 5/8” 6 1/8”PWC-02 37” 16 5/8” 6 1/8”
16.7 423
29.6
752
30.8
783
16.3 413
FRONT VIEW(COVER UP)
32.6 8276.2 157
SIDE VIEW(COVER UP)
16.7 423
37.0
940
38.3
974
39.4
1002
15.0 381
16.3 413FRONT VIEW(COVER UP)
6.2 15739.8 1010
SIDE VIEW(COVER UP)
PWC-01 PWC-02
PWC-01:
• Siemens SEQ24125SM, 24cct with main breaker • Square D CQO132M125C125, 24cct with main
breaker• Cutler CPM116, 16cct with main breaker
PWC-02:
• Siemens SEQ32200, 32cct with main breaker • Siemens EQ424BQ100, 3 Phase 200A, 24cct with main breaker• Square D CQO132M200C, 1 PHASE 200A with main breaker• Square D CQO324MB100C, 3 PHASE 100A with main breaker• Cutler CPM230, 1 phase, 200A with main breaker• Cutler 3CPM112, 3 phase, 100A with main breaker
THE FOLLOWING DISTRIBUTION PANELS WILL FIT INTO THE PWC ENCLOSURE
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 80
www.validmanufacturing.comPWC
The PWC is a pole and wall mount weatherproof cabinet specifi cally sized to house 120/240V distribution panels and other electrical and control equipment. The padlockable fl ip style lid allows convenient access and security.
Features/Specifi cations
• Pole/wall mount design• 16 gauge steel construction• Powder coat ASA 61 Grey• NEMA 3R rated• Mounting rails inside for panels• Padlockable fl ip-lid• Bolt or band-on style brackets• Open bottom design• All exterior hardware stainless steel• Fits 1 phase 100A and 200A panels up to 24 cct.• Fits 3 phase 100A panels up to 32 cct.
PART NUMBER HEIGHT WIDTH DEPTH
PWC-01 29 1/2” 16 5/8” 6 1/8”PWC-02 37” 16 5/8” 6 1/8”
16.7 423
29.6
752
30.8
783
16.3 413
FRONT VIEW(COVER UP)
32.6 8276.2 157
SIDE VIEW(COVER UP)
16.7 423
37.0
940
38.3
974
39.4
1002
15.0 381
16.3 413FRONT VIEW(COVER UP)
6.2 15739.8 1010
SIDE VIEW(COVER UP)
PWC-01 PWC-02
PWC-01:
• Siemens SEQ24125SM, 24cct with main breaker • Square D CQO132M125C125, 24cct with main
breaker• Cutler CPM116, 16cct with main breaker
PWC-02:
• Siemens SEQ32200, 32cct with main breaker • Siemens EQ424BQ100, 3 Phase 200A, 24cct with main breaker• Square D CQO132M200C, 1 PHASE 200A with main breaker• Square D CQO324MB100C, 3 PHASE 100A with main breaker• Cutler CPM230, 1 phase, 200A with main breaker• Cutler 3CPM112, 3 phase, 100A with main breaker
THE FOLLOWING DISTRIBUTION PANELS WILL FIT INTO THE PWC ENCLOSURE
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 80
www.validmanufacturing.comPWC
The PWC is a pole and wall mount weatherproof cabinet specifi cally sized to house 120/240V distribution panels and other electrical and control equipment. The padlockable fl ip style lid allows convenient access and security.
Features/Specifi cations
• Pole/wall mount design• 16 gauge steel construction• Powder coat ASA 61 Grey• NEMA 3R rated• Mounting rails inside for panels• Padlockable fl ip-lid• Bolt or band-on style brackets• Open bottom design• All exterior hardware stainless steel• Fits 1 phase 100A and 200A panels up to 24 cct.• Fits 3 phase 100A panels up to 32 cct.
PART NUMBER HEIGHT WIDTH DEPTH
PWC-01 29 1/2” 16 5/8” 6 1/8”PWC-02 37” 16 5/8” 6 1/8”
16.7 423
29.6
752
30.8
783
16.3 413
FRONT VIEW(COVER UP)
32.6 8276.2 157
SIDE VIEW(COVER UP)
16.7 423
37.0
940
38.3
974
39.4
1002
15.0 381
16.3 413FRONT VIEW(COVER UP)
6.2 15739.8 1010
SIDE VIEW(COVER UP)
PWC-01 PWC-02
PWC-01:
• Siemens SEQ24125SM, 24cct with main breaker • Square D CQO132M125C125, 24cct with main
breaker• Cutler CPM116, 16cct with main breaker
PWC-02:
• Siemens SEQ32200, 32cct with main breaker • Siemens EQ424BQ100, 3 Phase 200A, 24cct with main breaker• Square D CQO132M200C, 1 PHASE 200A with main breaker• Square D CQO324MB100C, 3 PHASE 100A with main breaker• Cutler CPM230, 1 phase, 200A with main breaker• Cutler 3CPM112, 3 phase, 100A with main breaker
THE FOLLOWING DISTRIBUTION PANELS WILL FIT INTO THE PWC ENCLOSURE
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
RWA
POLE MOUNT POWER CABINET
19912-12991
This pole mount cabinet is designed to be used where security is an issue. It contains a variety of different outlet configurations and is mainly used for event stages and sports field applications.
Options
• Loop feed distribution lugs• Custom powder coats available
Features/Specifications
• Marin-grade aluminum construction• CSA Type 3R rated• PC101 Grey powder coat finish• Pad-lockable cover• 15 to 50A receptacles• All mounting hardware included• Pole bracket designed for bolt or band-on installation• 125/250V single phase• 10kAIC rated• ETL certified to applicable CSA and UL standards
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 20
www.validmanufacturing.comRWA
This pole mount cabinet is designed to be used where security is an issue. It contains a variety of different outlet confi gurations and is mainly used for event stages and sports fi eld applications.
Features• Marine-grade aluminum construction• Powder coated ASA 61 Grey• Padlockable cover• NEMA 3R rated• 15 to 50 amp receptacles• All mounting hardware included• Pole bracket designed for bolt or
band-on installation
Specifi cations• 125/250 VAC 1 phase• 10,000 AIR• ETL certifi ed to applicable CSA and
UL standards
Optional Components• Loop feed distribution lugs• Custom powder coat colours
Benefi ts
This practical, security-enhanced cabinet is very durable and allows the user to have the electrical cords plugged in and the padlock engaged. The cabinet can be mounted on a post, pole or wall. With a wide range of powder coat colour options it can be designed to match surrounding aspects.
The enclosed protective circuit breaker allows the user to reset a fault without contacting maintenance personnel.
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 21
PO
WE
R
DIS
TR
IBU
TIO
N
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL MAIN BREAKER RECEPTACLE
RWA12015 14” 6.5” 6.25” ALUMINUM 15A 1P 15A GFI DUPLEXRWA12020 14” 6.5” 6.25” ALUMINUM 20A 1P 20A GFI DUPLEXRWA12030 18” 8” 8” ALUMINUM 30A 2P 30A 120/240VRWA12050 18” 8” 8” ALUMINUM 50A 2P 50A 120/240V
FOR ADDITIONAL OPTIONS CONSULT FACTORY
RWA
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 21
PO
WE
R
DIS
TR
IBU
TIO
N
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL MAIN BREAKER RECEPTACLE
RWA12015 14” 6.5” 6.25” ALUMINUM 15A 1P 15A GFI DUPLEXRWA12020 14” 6.5” 6.25” ALUMINUM 20A 1P 20A GFI DUPLEXRWA12030 18” 8” 8” ALUMINUM 30A 2P 30A 120/240VRWA12050 18” 8” 8” ALUMINUM 50A 2P 50A 120/240V
FOR ADDITIONAL OPTIONS CONSULT FACTORY
RWA
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone: 250-832-6477Fax: 250-832-7746E-mail: [email protected]
SPE4
Features/Specifications:
• CSAType4rated• SteelConstruction• Quarterturnfastener(s)ondoor• Gasketedhingedouterdoorwithpadlockattachment• PC101greypowdercoatfinish
Options:
• Aluminumorstainlesssteelconstruction• Drainsandbreathers• Custompowdercoatcolours
Panelboard Enclosure - Type 4
ThisfamilyofenclosuresarespecificallydesignedtohousetheSchneider®NQ&NFmainbreaker&mainlugpanelboardsforuseinlocationsrequiringwaterproofprotection.Thepanelboardishousedintheenclosurewiththetrimincludedinsidethesealedouterdoor.
19902-16991
*Note-TheseenclosuresaretohousetheSchneider®NQ&NFmainbreaker&mainlugpanelboards.
PART NUMBER DESCRIPTION - ACCOMODATES PANELBOARD TYPES: H W DMainBreakerNF-18cct,110A,3Phase,4Wire 28 24 6.5MainLugNQ-18cct,100A,SinglePhase,3Wire 28 24 6.5
SPE4-28-24-6.5MainLugNQ-18cct,100A,3Phase,4Wire 28 24 6.5MainLugNF-18cct,125A,3Phase,4Wire 28 24 6.5MainBreakerNF-30cct,110A,3Phase,4Wire 34 25 6.5MainLugNQ-30cct,100A,SinglePhase,3Wire 34 24 6.5
SPE4-34-24-6.5MainLugNQ-30cct,225A,SinglePhase,3Wire 34 24 6.5MainLugNQ-30cct,100A,3Phase,4wire 34 24 6.5MainLugNF-30cct,125A,3Phase,4Wire 34 24 6.5MainLugNQ-30cct,225A,3Phase,4Wire 34 24 6.5MainBreakerNQ-18cct,100A,SinglePhase,3Wire 40 24 6.5
SPE4-40-24-6.5MainBreakerNQ-18cct,100A,3Phase,4Wire 40 24 6.5MainBreakerNF-18cct,100A,3Phase,4WIre 40 24 6.5MainLugNQ-42cct,225A,SinglePhase,3Wire 40 24 6.5MainLugNQ-42cct,225A,3Phase,4Wire 40 24 6.5MainBreakerNQ-30cct,100A,SinglePhase,3Wire 46 24 6.5MainBreakerNQ-30cct,225A,SinglePhase,3Wire 46 24 6.5MainBreakerNQ-30cct,100A,3Phase,4Wire 46 24 6.5
SPE4-46-24-6.5MainBreakerNF-30cct,100A,3Phase,4Wire 46 24 6.5MainBreakerNQ-30cct,225A,3Phase,4Wire 46 24 6.5MainLugNQ-72cct,225A,SinglePhase,3wire 46 24 6.5MainLugNQ-72cct,225A,3Phase,4Wire 46 24 6.5MainLugNF-42cct,250A,3Phase,4Wire 46 24 6.5MainBreakerNQ-42cct,225A,SinglePhase,3Wire 52 24 6.5MainBreakerNQ-42cct,225A,3Phase,4Wire 52 24 6.5MainBreakerNF-30cct,250A,3Phase,4Wire 52 24 6.5MainLugNQ-84cct,225A,SinglePhase,3Wire 52 24 6.5MainLugNQ-30cct,400A,SinglePhase,3Wire 52 24 6.5
SPE4-52-24-6.5 MainLugNQ-42cct,400A,SinglePhase,3Wire 52 24 6.5MainLugNQ-84cct,225A,3Phase,4Wire 52 24 6.5MainLugNQ-30cct,400A,3Phase,4Wire 52 24 6.5MainLugNQ-30cct,400A,3Phase,4Wire 52 24 6.5MainLugNQ-42cct,400A,3Phase,4Wire 52 24 6.5MainLugNF-30cct,400A,3Phase,4Wire 52 24 6.5MainLugNF-30cct,600A,3Phase,4Wire 52 24 6.5MainBreakerNQ-72cct,225A,SinglePhase,3Wire 58 24 6.5MainBreakerNQ-72cct,225A,3Phase,4Wire 58 24 6.5
SPE4-58-24-6.5MainBreakerNF-42cct,250A,3Phase,4Wire 58 24 6.5MainLugNF-42cct,600A,3Phase,4Wire 58 24 6.5MainBreakerNQ-84cct,225A,SinglePhase,3Wire 64 24 6.5MainBreakerNQ-30cct,400A,SinglePhase,3Wire 64 24 6.5MainBreakerNQ-42cct,400A,SinglePhase,3Wire 64 24 6.5MainBreakerNQ-84cct,225A,3Phase,4Wire 64 24 6.5MainBreakerNQ-30cct,400A,3Phase,4Wire 64 24 6.5
SPE4-64-24-6.5 MainBreakerNQ-42cct,400A,3Phase,4Wire 64 24 6.5MainBreakerNF-30cct,400A,3Phase,4Wire 64 24 6.5MainLugNQ-72cct,400A,3Phase,4Wire 64 24 6.5MainLugNQ-30cct,600A,3Phase,4Wire 64 24 6.5MainLugNQ-42cct,600A,3Phase,4Wire 64 24 6.5MainLugNF-66cct,250A,3Phase,4Wire 64 24 6.5MainBreakerNF-42cct,400A,3Phase,4Wire 70 24 6.5
SPE4-70-24-6.5 MainLugNQ-84cct,400A,SinglePhase,3Wire 70 24 6.5MainLugNQ-84cct,400A,3Phase,4Wire 70 24 6.5MainBreakerNQ-72cct,400A,3Phase,4Wire 76 24 6.5
SPE4-76-24-6.5MainBreakerNF-66cct,250A,3Phase,4Wire 76 24 6.5MainLugNF-66cct,400A,3Phase,4Wire 76 24 6.5MainLugNF-66cct,600A,3Phase,4Wire 76 24 6.5
SPE4-82-24-6.5MainBreakerNQ-84cct,400A,3Phase,4Wire 82 24 6.5MainLugNQ-84cct,600A,3Phase,4Wire 82 24 6.5
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone: 250-832-6477Fax: 250-832-7746E-mail: [email protected]
SPE4X
Features/Specifications:
• CSAType4Xrated• StainlesssteelConstruction• Quarterturnfastener(s)ondoor• Gasketedhingedouterdoorwithpadlockattachment
Options:
• Drainsandbreathers• Custompowdercoatcolours
Panelboard Enclosure - Type 4X
ThisfamilyofenclosuresarespecificallydesignedtohousetheSchneider®NQ&NFmainbreaker&mainlugpanelboardforuseinlocationsrequiringwaterproofandcorrosionprotection.Thepanelboardishousedintheenclosurewiththetrimincludedinsidethesealedouterdoor.
19902-16991
*Note-TheseenclosuresaretohousetheSchneider®NQ&NFmainbreaker&mainlugpanelboards.
PART NUMBER DESCRIPTION - ACCOMODATES PANELBOARD TYPES: H W DMainBreakerNF-18cct,110A,3Phase,4Wire 28 24 6.5MainLugNQ-18cct,100A,SinglePhase,3Wire 28 24 6.5
SPE4X-28-24-6.5MainLugNQ-18cct,100A,3Phase,4Wire 28 24 6.5MainLugNF-18cct,125A,3Phase,4Wire 28 24 6.5MainBreakerNF-30cct,110A,3Phase,4Wire 34 25 6.5MainLugNQ-30cct,100A,SinglePhase,3Wire 34 24 6.5
SPE4X-34-24-6.5MainLugNQ-30cct,225A,SinglePhase,3Wire 34 24 6.5MainLugNQ-30cct,100A,3Phase,4wire 34 24 6.5MainLugNF-30cct,125A,3Phase,4Wire 34 24 6.5MainLugNQ-30cct,225A,3Phase,4Wire 34 24 6.5MainBreakerNQ-18cct,100A,SinglePhase,3Wire 40 24 6.5
SPE4X-40-24-6.5MainBreakerNQ-18cct,100A,3Phase,4Wire 40 24 6.5MainBreakerNF-18cct,100A,3Phase,4WIre 40 24 6.5MainLugNQ-42cct,225A,SinglePhase,3Wire 40 24 6.5MainLugNQ-42cct,225A,3Phase,4Wire 40 24 6.5MainBreakerNQ-30cct,100A,SinglePhase,3Wire 46 24 6.5MainBreakerNQ-30cct,225A,SinglePhase,3Wire 46 24 6.5MainBreakerNQ-30cct,100A,3Phase,4Wire 46 24 6.5
SPE4X-46-24-6.5MainBreakerNF-30cct,100A,3Phase,4Wire 46 24 6.5MainBreakerNQ-30cct,225A,3Phase,4Wire 46 24 6.5MainLugNQ-72cct,225A,SinglePhase,3wire 46 24 6.5MainLugNQ-72cct,225A,3Phase,4Wire 46 24 6.5MainLugNF-42cct,250A,3Phase,4Wire 46 24 6.5MainBreakerNQ-42cct,225A,SinglePhase,3Wire 52 24 6.5MainBreakerNQ-42cct,225A,3Phase,4Wire 52 24 6.5MainBreakerNF-30cct,250A,3Phase,4Wire 52 24 6.5MainLugNQ-84cct,225A,SinglePhase,3Wire 52 24 6.5MainLugNQ-30cct,400A,SinglePhase,3Wire 52 24 6.5
SPE4X-52-24-6.5 MainLugNQ-42cct,400A,SinglePhase,3Wire 52 24 6.5MainLugNQ-84cct,225A,3Phase,4Wire 52 24 6.5MainLugNQ-30cct,400A,3Phase,4Wire 52 24 6.5MainLugNQ-30cct,400A,3Phase,4Wire 52 24 6.5MainLugNQ-42cct,400A,3Phase,4Wire 52 24 6.5MainLugNF-30cct,400A,3Phase,4Wire 52 24 6.5MainLugNF-30cct,600A,3Phase,4Wire 52 24 6.5MainBreakerNQ-72cct,225A,SinglePhase,3Wire 58 24 6.5MainBreakerNQ-72cct,225A,3Phase,4Wire 58 24 6.5
SPE4X-58-24-6.5MainBreakerNF-42cct,250A,3Phase,4Wire 58 24 6.5MainLugNF-42cct,600A,3Phase,4Wire 58 24 6.5MainBreakerNQ-84cct,225A,SinglePhase,3Wire 64 24 6.5MainBreakerNQ-30cct,400A,SinglePhase,3Wire 64 24 6.5MainBreakerNQ-42cct,400A,SinglePhase,3Wire 64 24 6.5MainBreakerNQ-84cct,225A,3Phase,4Wire 64 24 6.5MainBreakerNQ-30cct,400A,3Phase,4Wire 64 24 6.5
SPE4X-64-24-6.5 MainBreakerNQ-42cct,400A,3Phase,4Wire 64 24 6.5MainBreakerNF-30cct,400A,3Phase,4Wire 64 24 6.5MainLugNQ-72cct,400A,3Phase,4Wire 64 24 6.5MainLugNQ-30cct,600A,3Phase,4Wire 64 24 6.5MainLugNQ-42cct,600A,3Phase,4Wire 64 24 6.5MainLugNF-66cct,250A,3Phase,4Wire 64 24 6.5MainBreakerNF-42cct,400A,3Phase,4Wire 70 24 6.5
SPE4X-70-24-6.5 MainLugNQ-84cct,400A,SinglePhase,3Wire 70 24 6.5MainLugNQ-84cct,400A,3Phase,4Wire 70 24 6.5MainBreakerNQ-72cct,400A,3Phase,4Wire 76 24 6.5
SPE4X-76-24-6.5MainBreakerNF-66cct,250A,3Phase,4Wire 76 24 6.5MainLugNF-66cct,400A,3Phase,4Wire 76 24 6.5MainLugNF-66cct,600A,3Phase,4Wire 76 24 6.5
SPE4X-82-24-6.5MainBreakerNQ-84cct,400A,3Phase,4Wire 82 24 6.5MainLugNQ-84cct,600A,3Phase,4Wire 82 24 6.5
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
SPW01
POLE MOUNT, ROADSIDE CABINET
19911-12991
This cabinet is designed to meet all British Columbia Ministry of Transportation requirements and is used for road and streetside controls, primarily traffic pre-emption.
Features/Specifications
• 304 (#4) stainless or marine-grade aluminum construction• Aluminum enclosures are powder coated PC101 Grey• CSA Type 3R rated• Padlockable stainless steel handle• Pole mounting holes on back• Hidden hinges for added security• 2” chase nipples• Full aluminum backpanel• Pole wiring access hole and chase nipple• MOTBC approved• All mounting hardware included
Optional Components
• Heater and thermostat• Fan and thermostat• Shelves• Pre-punched backpanel• Power distribution equipment• Humidistat
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 66
www.validmanufacturing.comSPW01
This cabinet is designed to meet all British Columbia Ministry of Transportation requirements and is used for road and streetside controls, primarily traffi c pre-emption.
Benefi ts
This cabinet can be used for a large variety of applications and with the aluminum or stainless steel metal composites it will handle the harsh conditions of roadside applications. With the optional heater and fan combinations the control devices will work without problems associated with many otherenclosures.
It is supplied with a 2” chase nipple used to access the pole and stainless steel mounting hardware.
Features• 304 (#4) stainless or marine-grade
aluminum construction• Aluminum enclosures are powder-coated
ASA 61 Grey• NEMA 3R rated• Padlockable stainless steel handle• Pole mounting holes on back• Hidden hinges for added security• 2” chase nipples• Full aluminum backpan• Pole wiring access hole and chase nipple• All mounting hardware included
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• MOTBC approved
Optional Components• Heater and thermostat• Fan and thermostat• Shelves• Pre-punched backpan• Power distribution equipment• Humidistat
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 67
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
16.0 40613.3 337
20.8
528
24.0
610
16.0 406
B B
FRONT VIEW(DOOR REMOVED)
13.7
349
15.6
395
12.0
305
C C
ASECTION B-B
13.0 3302.0 51
17.3
441
22.5
572
SECTION C-C(BACK PANEL)
DETAIL A
PART NUMBER HEIGHT WIDTH DEPTH MATERIALSPW01-A 24” 16” 12” ALUMINUMSPW01-S 24” 16” 12” STAINLESS STEEL
FOR ADDITIONAL OPTIONS CONSULT FACTORY
SPW01
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 67
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
16.0 40613.3 337
20.8
528
24.0
610
16.0 406
B B
FRONT VIEW(DOOR REMOVED)
13.7
349
15.6
395
12.0
305
C C
ASECTION B-B
13.0 3302.0 51
17.3
441
22.5
572
SECTION C-C(BACK PANEL)
DETAIL A
PART NUMBER HEIGHT WIDTH DEPTH MATERIALSPW01-A 24” 16” 12” ALUMINUMSPW01-S 24” 16” 12” STAINLESS STEEL
FOR ADDITIONAL OPTIONS CONSULT FACTORY
SPW01
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 68
www.validmanufacturing.comSPW01U
This cabinet is designed to support a small UPS (uninterruptable power supply) and a single large battery or two small batteries.
Benefi ts
This ‘mini’ style UPS cabinet is used on small intersections or railway crossings. With the fi ltered louvers, fi tted shelf and compact design this cabinet exceeds the requirements for an outdoor rated UPS cabinet.
Features• 304 (#4) stainless or marine-grade
aluminum construction• Aluminum enclosures are powder-coated
ASA 61 Grey• NEMA 3R rated• Padlockable stainless steel handle• Pole mounting holes on back• Hidden hinges for added security• 2” chase nipples• Full aluminum backpan• Pole wiring access hole and chase nipple• All mounting hardware included
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• MOTBC approved
Optional Components• Heater and thermostat• Fan and thermostat• Shelves• Pre-punched backpan• Power distribution equipment• Humidistat
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 69
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
16.0 406
13.3 337
20.8
528
24.0
610
16.0 406
B B
FRONT VIEW(DOOR REMOVED)
13.7
349
15.6
395
12.0
305
C C
A
SECTION B-B
13.0 3302.0 51
17.3
441
22.5
572
SECTION C-C(BACK PANEL)
DETAIL A
PART NUMBER HEIGHT WIDTH DEPTH MATERIALSPW01-UPS-A 24” 16” 12” ALUMINUMSPW01-UPS-S 24” 16” 12” STAINLESS STEEL
FOR ADDITIONAL OPTIONS CONSULT FACTORY
SPW01U
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
alid
SWMThe SWM meter cabinet is used in outdoor applications for protection of metering transformers from rain, sleet and snow. These enclosures are rated Type 3R and manufactured with galvanized steel for additional corrosion protection. Steel backpans are standard for ease of mounting equipment. The cabinets are finished with PC101 (ANSI 61) grey powder coat paint.
PART NUMBER HEIGHT WIDTH DEPTH DOORS
SWM20208 20 20 8 SINGLESWM202010 20 20 10 SINGLESWM271310 27 13 10 SINGLESWM302010 30 20 10 SINGLESWM303010 30 30 10 DOUBLESWM363612 36 36 12 DOUBLESWM484810 48 48 10 DOUBLESWM484812 48 48 12 DOUBLE
Features/Specifications
• Galvanized steel construction• Pour in place gasket• CSA Type 3R rated• Wall mount ears top and bottom• White steel backpan• Drip cover• Hinged door(s) with gasket• Padlockable 3 point latch• PC101 (ANSI 61) Grey powder coat finish• Custom sizes, material and colour available
WEATHERPROOF METER CABINETS WITH 3 POINT LATCH
19902-16991
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 81
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
5.7 145
1.5 39
12.6
319
9.9
252
.4 X411
13.6
344
5.2 131FRONT VIEW(COVER UP)
12.3 314
3.9 99
SIDE VIEW(COVER UP)
TDPS
The TDPS Telephone Demarcation Panel is a convenient pole mount compact enclosure with cable entry points at the top and bottom to enable a single access point for telephone connections. The plywood backpan allows easy mounting of equipment. The enclosure is manufactured from stainless steel and all connecting hardware is stainless, therefore offering superior corrosion protection.
Features/Specifi cationsFeatures/Specifi cations
• Pole mount design• 304 (#4) stainless steel construction• NEMA 3R rated• Top and bottom cable entry• Plywood backpan• Flip-lid• All mounting hardware supplied including 1” bullet hub
and 1” threaded plug• Bolt or band-on style brackets
OptionsOptions
• Custom sizes• Steel construction• Custom powder coat colours
PART NUMBER HEIGHT WIDTH DEPTH MATERIALTDPS-6-10-6 10” 5 3/4” 3 7/8” STAINLESS STEEL
CONSULT FACTORY FOR OPTIONAL SIZES AND CONFIGURATIONS
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 70
www.validmanufacturing.comUPS13
This NEMA 3R enclosure is designed to support a UPS and is mounted to the back of and existing intersection control cabinet. It is large enough to support a UPS and 4 smaller batteries.
Benefi ts
The rollout shelf of this UPS cabinet makes it convenient to test and change the batteries. Its recessed handle and hidden hinges provide added security. This cabinet is usually powder coated ASA-61 grey but additional colours are available.
Features• 304 (#4) stainless or marine-grade
aluminum construction• Aluminum enclosures are powder-coated
ASA 61 Grey• NEMA 3R rated• Padlockable 3-point latch mechanism on
door• Recessed handle• Hidden hinges for added security• Slanted roof to repel rain, ice and snow• Filtered louvers• Cabinet or base mount• 200 lb rated battery shelf with rollout
feature• All mounting hardware included
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• 1/8” Marine-grade aluminum construction
Optional Components• Police door• Generator outlet• Custom powder coat colours
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 71
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
26.0
660
31.0 787
27.3 692
19.2
489
30.0 762
A A
FRONT VIEW(DOOR REMOVED)
14.1
359
12.0
305
BSECTION A-A
DETAIL B
PART NUMBER HEIGHT WIDTH DEPTH MATERIALUPS13A 26” 30” 12” ALUMINUMUPS13S 26” 30” 12” STAINLESS STEEL
ADDITIONAL OPTIONSPOLICE DOORGENERATOR OUTLET
UPS13
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 72
www.validmanufacturing.comUPS14
This NEMA 3R enclosure is designed for MOT Ontario to house 4 large batteries at an intersection controller. It is another variation to the UPS family of control cabinets for applications where a narrower width is required.
Benefi ts
This cabinet can accommodate a UPS and up to 4 batteries, and its shelves make it a handy general-purpose weatherproof cabinet for other applications as well. It is usually powder coated ASA-61 grey but additional colours are available.
Features• 304 (#4) stainless or marine-grade
aluminum construction• Aluminum enclosures are powder-coated
ASA 61 Grey• NEMA 3R rated• Padlockable 3-point latch mechanism on
door• Stainless steel piano hinge• Cross broke roof with drip-lip• Filtered louvers• Pole or base mount• 2 shelved designed for large batteries
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• MOT Ontario certifi ed• 1/8” marine-grade aluminum construction
Optional Components• Pole mount brackets• Base mount brackets• Custom powder coat colours
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 73
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
24.6
625
15.1 38518.0 457
28.0
711
A A
FRONT VIEW(DOOR REMOVED)
16.6
421
18.4
467
15.0
381
SECTION A-A
PART NUMBER HEIGHT WIDTH DEPTH MATERIALUPS14A 28” 18” 15” ALUMINUMUPS14S 28” 18” 15” STAINLESS STEEL
UPS14
ADDITIONAL OPTIONSPOLE MOUNT BRACKETSBASE MOUNT BRACKETS
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
19909-14991
The VWHA junction box comes with padlockable hinged lid to be used in outdoor applications for protection from rain, sleet and snow. These enclosures are rated Type 3R and manufactured with marine-grade aluminum l for additional corrosion protection. Backpans are standard for ease of mounting equipment.
PART NUMBER HEIGHT (INCHES)
WIDTH(INCHES)
DEPTH(INCHES)
VWHA664 6 6 4
VWHA864 8 6 4
VWHA1084 10 8 4
VWHA1086 10 8 6
VWHA10106 10 10 6
VWHA12104 12 10 4
VWHA12106 12 10 6
VWHA12108 12 10 8
VWHA12126 12 12 6
VWHA12128 12 12 8
VWHA14126 14 12 6
VWHA16146 16 14 6
VWHA16168 16 16 8
VWHA18166 18 16 6
VWHA18168 18 16 8
VWHA18186 18 18 6
VWHA20168 20 16 8
VWHA20188 20 18 8
VWHA24106 24 10 6
VWHA24168 24 16 8
VWHA24186 24 18 6
VWHA24246 24 24 6
VWHA24248 24 24 8
VWHA242410 24 24 10
VWHA30248 30 24 8
VWHA302410 30 24 10
VWHA30306 30 30 6
VWHA30308 30 30 8
VWHA303010 30 30 10
VWHA362410 36 24 10
VWHA363010 36 30 10
VWHA363612 36 36 12
VWHA483612 48 36 12
Features/Specifications
• Marine-grade aluminum construction• Pour in place gasket• CSA Type 3R rated• Wall mount ears top and bottom• Hinged door with gasket• Padlockable hasp• White steel backpanel• Naturalfinish• Custom sizes, material and colour available• Optional no backpanel & backpanel mounting studs: Add ‘-NB’ to P/N
○Example:VWHA10106-NB
ALUMINUM WEATHERPROOF HINGED JUNCTION BOX
VWHA
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
19909-14991
Features/Specifications
• Galvanizedsteelconstruction• Pourinplacegasket• CSAType3Rrated• Wallmountearstopandbottom• Hingeddoorwithgasket• Padlockablehasp• Whitesteelbackpanel• Optionalnobackpanel&backpanelmountingstuds:Add‘-NB’toP/N•• Customsizes,materialandcolouravailable• PC101(ANSI61)Greypowdercoatfinish
○Example:VWHC10106-NB
TheVWHCjunctionboxcomeswithpadlockablehingedlidtobeusedinoutdoorapplicationsforprotectionfromrain,sleetandsnow.TheseenclosuresareratedType3Randmanufacturedwithgalvanizedsteelforadditionalcorrosionprotection.Backpansarestandardforeaseofmountingequipment.JunctionboxesarefinishedwithPC101(ANSI61)greypowdercoatpaint.
WEATHERPROOF HINGED JUNCTION BOX
VWHC
PART NUMBER HEIGHT (INCHES)
WIDTH(INCHES)
DEPTH(INCHES)
VWHC664 6 6 4
VWHC864 8 6 4
VWHC1084 10 8 4
VWHC1086 10 8 6VWHC10106 10 10 6VWHC12104 12 10 4
VWHC12106 12 10 6VWHC12108 12 10 8VWHC12126 12 12 6VWHC12128 12 12 8VWHC14126 14 12 6VWHC16146 16 14 6VWHC16168 16 16 8VWHC18166 18 16 6VWHC18168 18 16 8VWHC18186 18 18 6VWHC20168 20 16 8VWHC20188 20 18 8VWHC24106 24 10 6VWHC24168 24 16 8VWHC24186 24 18 6VWHC24246 24 24 6VWHC24248 24 24 8VWHC242410 24 24 10
VWHC30248 30 24 8VWHC302410 30 24 10
VWHC30306 30 30 6VWHC30308 30 30 8VWHC303010 30 30 10
VWHC362410 36 24 10
VWHC363010 36 30 10
VWHC363612 36 36 12VWHC483612 48 36 12
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
VWLThe VWL weatherproof wireway is used in outdoor applications for protection from rain, sleet and snow. The removable hinged door allows easy access and additional safety by enabling the user to close the cover with one hand. These wireways are rated Type 3R and manufactured with galvanized steel for additional corrosion protection and are finished with PC101 (ANSI 61) grey polyester powder coat paint.
PART NUMBER HEIGHT (INCHES)
WIDTH(INCHES)
DEPTH(INCHES)
VWL2486 8 24 6VWL3686 8 36 6VWL4886 8 48 6VWL6086 8 60 6VWL7286 8 72 6VWL24106 10 24 6VWL36106 10 36 6VWL48106 10 48 6VWL60106 10 60 6VWL72106 10 72 6VWL48127 12 48 7VWL60127 12 60 7VWL72127 12 72 7
Features/Specifications
• Galvanized steel construction• CSA Type 3R rated• Pour in place gasket• Hinged lid with quarter turn fasteners• Mounting ears• PC101 (ANSI 61) Grey powder coat finish• Custom sizes, material and colour available
WEATHERPROOF WIREWAYS
19906-14991
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
VWLAThe VWLA junction box is used in outdoor applications for protection from rain, sleet and snow. These enclosures are rated Type 3R and manufactured with marine-grade aluminum for additional corrosion protection.
Features/Specifications
• Marine-grade aluminum construction• CSA Type 3R rated• Pour in place gasket• Wall mount ears top and bottom• Lift off cover• Naturalfinish• Custom sizes, material and colour available
ALUMINUM WEATHERPROOF JUNCTION BOX
19907-13991
PART NUMBERHEIGHT
(INCHES)WIDTH
(INCHES)DEPTH
(INCHES)
VWLA664 6 6 4
VWLA884 8 8 4
VWLA886 8 8 6
VWLA10104 10 10 4
VWLA10106 10 10 6
VWLA12124 12 12 4
VWLA12126 12 12 6
VWLA16166 16 16 6
VWLA16168 16 16 8
VWLA18186 18 18 6
VWLA20166 20 16 6
VWLA24206 24 20 6
VWLA24246 24 24 6
VWLA24248 24 24 8
VWLA30208 30 20 8
VWLA302010 30 20 10
VWLA303010 30 30 10
VWLA303012 30 30 12
VWLA363012 36 30 12
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
VWLCThe VWLC junction box is used in outdoor applications for protection from rain, sleet and snow. These enclosures are rated Type 3R and manufactured with galvanized steel for additional corrosion protection. Junction boxes are finished with PC101 (ANSI 61) grey polyester powder coat paint.
Features/Specifications
• Galvanized steel construction• CSA Type 3R rated• Pour in place gasket• Wall mount ears top and bottom• Lift off cover• PC101 (ANSI 61) Grey powder coat finish• Custom sizes, material and colour available
WEATHERPROOF JUNCTION BOX
19907-13991
PART NUMBERHEIGHT
(INCHES)WIDTH
(INCHES)DEPTH
(INCHES)
VWLC664 6 6 4VWLC884 8 8 4VWLC886 8 8 6
VWLC10104 10 10 4VWLC10106 10 10 6VWLC12124 12 12 4VWLC12126 12 12 6VWLC16166 16 16 6VWLC16168 16 16 8
VWLC18186 18 18 6VWLC20166 20 16 6VWLC24206 24 20 6VWLC24246 24 24 6VWLC24248 24 24 8
VWLC30208 30 20 8
VWLC302010 30 20 10VWLC303010 30 30 10VWLC303012 30 30 12VWLC363012 36 30 12
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
VWMThe VWM meter cabinet is used in outdoor applications for protection of metering transformers from rain, sleet and snow. These enclosures are rated Type 3R and manufactured with galvanized steel for additional corrosion protection. Steel backpans are standard for ease of mounting equipment. The cabinets are finished with PC101 (ANSI 61) grey powder coat paint.
PART NUMBER HEIGHT (INCHES)
WIDTH(INCHES)
DEPTH(INCHES)
VWM202010 20 20 10VWM242410 24 24 10VWM271310 27 13 10VWM303010 30 30 10VWM363612 36 36 12VWM484812 48 48 12
Features/Specifications
• Galvanized steel construction• Pour in place gasket• CSA Type 3R rated• Wall mount ears top and bottom• White steel backpanel• Drip cover• Hinged door with gasket (48” is double door)• Padlockable hasp (48”W has padlockable 3 point handle)• PC101 (ANSI 61) Grey powder coat finish• Custom sizes, material and colour available
WEATHERPROOF METER CABINETS
19901-16991
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
VWSThe VWS junction box is used in outdoor applications for protection from rain, sleet and snow. The removable slide on cover allows ease of installation and accessibility to installed components. These enclosures are rated Type 3R and manufactured with galvanized steel for additional corrosion protection. Junction boxes are finished with PC101 (ANSI 61) grey powder coat paint.
PART NUMBER HEIGHT (INCHES)
WIDTH(INCHES)
DEPTH(INCHES)
VWS664 6 6 4VWS884 8 8 4
VWS1084 10 8 4VWS10104 10 10 4VWS12124 12 12 4VWS12126 12 12 6VWS16166 16 16 6VWS18186 18 18 6VWS20208 20 20 8
Features/Specifications
• Galvanized steel construction• CSA Type 3R rated• Mounting tabs on back of enclosure• Padlockable Lift off cover• PC101 (ANSI 61) Grey powder coat finish• Custom sizes, material and colour available
WEATHERPROOF SLIDE ON COVER JUNCTION BOX
19906-13991
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
VWTThe VWT telephone cabinet is used in outdoor applications for protection of telephone termination equipment from rain, sleet and snow. These enclosures are rated Type 3R and manufactured with galvanized steel for additional corrosion protection. Plywood backpans are standard for ease of mounting equipment. The cabinets are finished with PC101 (ANSI 61) grey polyester powder coat paint.
PART NUMBER HEIGHT (INCHES)
WIDTH(INCHES)
DEPTH(INCHES)
VWT18126 18 12 6VWT24186 24 18 6VWT24246 24 24 6VWT36246 36 24 6
Features/Specifications
• Galvanized steel construction• CSA Type 3R rated• Pour in place gasket• Wall mount ears top and bottom• Plywood backpan• Drip cover• Hinged door with gasket • Key lock handle• PC101 (ANSI 61) Grey powder coat finish• Custom sizes, material and colour available
WEATHERPROOF TELEPHONE CABINET
19906-13991
alid
Toll Free Phone: 888-632-6477Phone 250-832-6477Fax: 250-832-7746E-mail: [email protected]
Pg. 56
www.validmanufacturing.comWMC10
This NEMA 3R enclosure is designed as a wall mounted cabinet mainly used to house controls. It can be used for any outdoor applications and can be mounted to a solid surface.
Features• Marine-grade aluminum construction• Powder-coated ASA 61 Grey• NEMA 3R rated• Padlockable 3-point latch mechanism on
door• Door stays• Slanted roof to repel rain, ice and snow• Complete backpan• Filtered louvers• Wall mount
Specifi cations• ETL certifi ed to applicable CSA and UL
standards• MOTBC approved• 1/8” marine-grade aluminum construction
Optional Components• Heater and thermostat• Fan and thermostat• Lights and door switch• Styrofoam insulation• Shelves• Side panels• Security handle cover• Electrical controls/power distribution• Pre-punched back pan• Recessed handle• Fold-down laptop tray• Convenience receptacle• Custom powder coat colours
Benefi ts
This cabinet is designed to fi ll the specialty needs for overhead bridge signs, camera controls, cellular sites and other communication control stations. The painted enclosures come standard ASA 61 Grey but can be custom powder coated in any colour.
www.validmanufacturing.com
VA-0110 All metric dimensions are in millimeters and shown in brackets Pg. 57
EL
EC
TR
ICA
L/
CO
NT
RO
L C
AB
INE
TS
41.2
1048
33.0 838
48.0
1219
49.8
1264
36.0 914
A A
FRONT VIEW(DOOR REMOVED)
22.0
558
23.8
604
20.0
508
B B
CSECTION A-A
43.0
1092
33.6 854
SECTION B-B(BACK PANEL)
DETAIL C
PART NUMBER HEIGHT WIDTH DEPTH MATERIALWMC10A 48” 34” 22” ALUMINUM
ADDITIONAL OPTIONSHEATER AND THERMOSTATFAN AND THERMOSTATLIGHTS AND DOOR SWITCHINSULATEDSINGLE ADJUSTABLE SHELF
WMC10
CONSULT FACTORY FOR ALL OPTIONAL CONFIGURATIONS