ge 6477 discontinuous rock 6. review of rock mechanicsweb.mst.edu/~norbert/ge6477/class notes/2 to a...
TRANSCRIPT
1
GE 6477 DISCONTINUOUS ROCK6. Review of Rock Mechanics
Dr. Norbert H. Maerz
Missouri University of Science and Technology
(573) 341-6714
Instructional Objectives
1. Describe how we use rock mechanics to predict the response of the ground to excavation and construction.
2. Explain the relationship between the strength of intact rock and the strength of fractured rock.
3. Evaluate the three failure modes of rock (tensile, compressive, and shear) in terms of their application to rock engineering situations.
4. Interpret the Hudson interaction models in terms of underground design/construction issues.
5. Classify the practical aspects engineering design as they relate to discontinuities.
2
Review of Rock Mechanics
• Rock Mechanics of Discontinuities
• Rock Mechanics of Discontinuous Rock
What is Rock Mechanics?
• It is the study of the mechanical behavior of rock and rock masses
– Deformation
– Stability
– Excavation
– Support
3
How Do We Use Rock Mechanics
• Determine the mechanical properties of the rock
• Determine the conditions in the ground (stress, water pressure) and predict the changes in theses due to construction
• Predict the response of the rock
• Control the response of the rock
Mechanical Properties
• Strength
• Deformability
• Hydraulic Conductivity
4
5
Index Test: eg. Point Load
From the collection of Dr. J. A. Franklin
Design Test: eg. Field Shear
From the collection of Dr. J. A. Franklin
6
Ground Conditions
• Measure in-situ stresses in the ground
• Measure water pressures
From the collection of Dr. J. A. Franklin
Predict the response of the Rock
• Continuum mechanics • Physical Analogs
From the collection of Dr. J. A. Franklin
7
Predict the response of the Rock
• Numerical Modeling • Rock Mass Classification
From the collection of Dr. J. A. Franklin
Control the response of the rock
• Final or design element of the process:
– Size, shape, orientation, location of opening
– Excavation method and sequencing
– Short and long term support
– Water control
8
Single vs Multiple Joints,FACTS:
1. A single joint is easy to analyze
2. Multiple joints (networks) are very difficult to analyze
3. Real rocks typically have multiple joints
Intact Rock Strength
• Consider a homogeneous isotropic intact rock mass
• The strength of the rock is constant no matter what the orientation of the load
9
Single Discontinuity
• Depending on the orientation of the discontinuity with respect to the load, the strength may equal the intact rock strength, or dramatically reduced.
Two Discontinuities
• Wider range of orientations over which the rock mass is weaker.
10
Multiple Discontinuities
• Weaker rock mass at all orientations.
Rock Mechanics of Single Discontinuities
• Primarily a shear strength concern.
• Issue of compliance.
11
Response of a Discontinuity to Stress
• Tension
• Compression
• Shear
Tension
• No strength
12
Compression
• Strain hardening
Shear
• Strain softening
13
Shear strength model
Stress Distribution in Jointed Media
14
Rock Mechanics of Discontinuous Rock
• Interaction of 4 elements:
• 1) structure
• 2) stress
• 3) water
• 4) construction
15
Applications
• Fluid flow
• Slope stability
• Block caving (mining)
• Pre-split blasting
• Mechanical excavation
• Underground support
• Wall Control
16
• Fluid flow through fractures
From the collection of Dr. J. A. Franklin
17
Slope Stability
From the collection of Dr. J. A. Franklin
18
From the collection of Dr. J. A. Franklin
From the collection of Dr. J. A. Franklin
19
From the collection of Dr. J. A. Franklin
Block caving
20
From the collection of Dr. J. A. Franklin
Pre-split Blasting
21
From the collection of Dr. J. A. Franklin
Mechanical Excavation
22
From the collection of Dr. J. A. Franklin
Underground support
23
From the collection of Dr. J. A. Franklin
Wall control
24
25