aldsworth wheelie bin and log store...the log store and wheelie bin. note this piece will have 2...
TRANSCRIPT
Customer ServiceNumber: 08456084448Website: www.gardentrading.co.ukMissing Parts: [email protected] Information: [email protected]
Aldsworth Wheelie Bin and Log Store
PLEASE NOTE: THIS LOG STORE COMES WITH 34 BOLTS
1. Place the log store slatted floor in position 2. Fix the three longer single slats to the floor on the left hand/front side of the log store. Note that one of these slats has holes for two bolts this should be the corner post 3. Repeat with the three shorter slats fixing these to the floor panel on the right/rear side of the logstore using the bolts provided. Keep the rounded bolt heads facing outwards with a washer and nut secured behind 4. Now fix the slatted wall to the back of the floor panel to create the dividing wall between the log store and wheelie bin. Note this piece will have 2 bolt holes both top and bottom 5. Position and fix the roof into place with the bolt heads facing outwards 6. Now attach the outer slatted wall to form the left hand/outside edge of the bin store 7. Tighten up all the bolt fixings once the log store is assembled 8. Fix the metal bar in the arrow position to help brace the side walls of the bin store below the door 9. Now using the screws provided fix the 2 hinges to the right hand side of the door 10. Finish with fixing the sliding bolt at a comfortable height on the left hand side of the door 11. Please position against a sheltered wall
See no. 8