airfields engineering and asset main ten ace - a sector report
TRANSCRIPT
-
8/2/2019 Airfields Engineering and Asset Main Ten Ace - A Sector Report
1/4
Airfield Engineering Asset Maintenance A sector report
Airport engineers, operational and maintenance heads are working under extremely challenging
operational scheduling and cost constraints. In addition new, larger aircraft types and higher traffic levelsrequire these personnel to plan significant extension and refurbishment of their airfield assets to ensure
their airport is not left behind.
The need for runway expansions, upgrades and refurbishments is increasing the demands made on your
airfield maintenance plans and strategies. At the same time, the windows of opportunity for carrying out
this work whilst maintaining operational efficiency are becoming more limited.
This research paper will touch on the issues, challenges and probable outcomes we may begin to see on
the Airfield Engineering landscape.
Issues
As mentioned, increasing requirements for runway expansions, upgrades and refurbishments are raising
the pressures faced by those in charge of planning and implementing airfield maintenance plans and
strategies. At the same time, the windows of opportunity for carrying out these works whilst maintainingoperational efficiency are becoming more limited.
Another issue which will be affecting airfield pavements is the increase in aircraft tire pressures of futureaircraft and those aircraft entering into the commercial fleets from Boeing and Airbus, in particular the B-
787 and A-350 where tire pressure are increasing from 218 psi to over 250 psi. The industry is unsurehow these new aircraft will affect the life of the current pavements in place at numerous airfields and if
current mix designs for asphalt pavement are sufficient for these new aircraft.
The other issue is that needs to clarified is whether these new aircrafts are affecting the ICAO load ratingsystem of Pavement Classification Number (PCN) and whether this classification system should be
reviewed and revised to meet the future needs of the aircraft manufactures and airport authorities(owners).
Repair costs
Cost, for both repair and expansion projects, coupled with critical timing are an overriding concern forairfield engineers. Another key issue concern is cracks and damages to the runway or tarmac as a result of
the wear and tear in many international airports. Airfield engineers need to understand how to preventcracking and how to rehabilitate old pavements.
This is particularly an issue simply because the window for airport pavement maintenance is small and
there is less downtime for maintenance across all airfields. Consequently there is a need for moreinformation on computerized scheduling tools and airport management systems.
Resea
-
8/2/2019 Airfields Engineering and Asset Main Ten Ace - A Sector Report
2/4
Training & Human Resources
There is a need to close the gap on issues that airfield engineers face and the gap in understanding
between airport design consultants and contractors. While airport design consultants tend to be keener tointroduce new technology as well as tarmac and bitumen mixes the contractors are more reticent and
like to stick with the processes and platforms that they know.
This leads to issues such as training staff to roll out this new equipment which will have significant costsand investment. There is also a need to overcome cultural challenges, especially among crews and about
whays of worksing and changes to the way things have always been done.
There is also an inherent need to change the attitudes of the workforce and ensure that they buy in to new
processes to improve efficiency and technical performance, unfortunately this will take time and a lot oftraining and time is money.
Financing
Financing for the airport industry is a massive issue for the entire sector. Very few can afford to do the
work at the moment. Available funding has been cut dramatically and all stakeholders have to findcheaper ways of doing things.
For certain airport this has meant increased use of spray polymer treatments to extend runway lifespans
and speed up maintenance cycles.
Maintenance has to go like clockwork and it is harder to do with sprays although there are morecomplex and newer materials,people arent used to or trained to working with these materials yet.
One of the biggest challenges airfield expansion and renewal projects pose as of today is directly related
to the question of how to assure stakeholders that capital expenditures are prudently managed, designedin a way so as to optimize capacity utilization and developed sequentially in order to keep options open
until the last minute, thus allowing the airfield manager to optimise the response toexpansions/contractions in the market while using the ROI as major decision criteria.
Possible solutions
The use of fully automated data collection systems to inspect airfield pavements quickly and efficiently
may be incorporated in the process, by possibly being able to inspect 100% of the pavements each yearrather than only 20% to 30% per year.
The use of Artificial Intelligence (AI) and/or neural networks in the analysis of this data so the
subjectivitiy of individuals can be removed from the pavement condition inspection.
Also to combat harsh weather conditions, such local rain intensity, improvements in drainage may beincorporated to by grooving of runways. This will reduce the potential for hydroplaning and also reduce
the potential for ice formation on runways, allowing it to drain before it freezes. Constructed andorganized the proper way this might by something that could lead to performance credit for the operators.
For the snow and ice contaminated situation, use of anti-icing runway chemicals to keep the runways in a
no worse than wet condition should be utilised. If this is not achievable there will be a need for trainedpersonnel and proper dimensioned snow removal equipment. For trained personnel, the focus must be,
Resea
-
8/2/2019 Airfields Engineering and Asset Main Ten Ace - A Sector Report
3/4
3
most important, on their ability to identify and report the runway state in a way meaningful for the pilot.
This may take some time to come up with but presently there is no agreed global reporting format.
When attempting to maximise safety and efficiency for airports, one of the key issues often faced is the
need to identify, map and understand all stakeholders interests, and, if possible, to accommodate thoseinterests in the overall planning and execution processes.
Although nowadays the use of technology enables airport operators to increase throughput, whilstmaintaining safety and security standards at the levels required by the supervision authorities, it is alsotrue that in order to maintain those safety and security levels, some restrictions may have to be
implemented that hinder lean and transparent business processes with subsequent impacts in convenienceand speed.
The project manager of large airfield expansion and renewal projects has the obligation to balance the
requirements imposed by safety and security authorities with the requirements of its customers, be theythe airlines, retail concessionaires or passengersall of them expecting to find an hassle free environment
when using an airport.
Opportunities & Innovations
In airfield engineering these days there is less and less a place for breakthrough developments. Instead
major advances are being achieved through incremental optimisations and fine tuning.
At the same time, due to dynamics of the marketplace, airports will have to continuously improve theircost bases whilst offering increasing value to passengers and airlines.
The generalisation of geographical information systems (GIS) will be one major opportunity in airfield
engineering and asset management that will eventually be fully utilised. The same holds true whereintegrated airfield pavement management systems are concerned. The condition assessment of existing
pavements (including structural evaluation and runway friction monitoring and visual surface conditionassessment) because of its relevance in terms of either capital expenditure or operating costs, will
continue to be of major importance (in this context, the use of new both intrusive and non-destructivetesting techniques will open further opportunities for development).
Also the development of automatic runway foreign object debris (FOD) detection systems will certainly
see major developments in the near future as runway utilisation go up and up.
There is great potential in addressing the quality of the runways and the associated RESAs. Given theinternational aspect of aviation, a cross state database containing the drainage surface characteristics of
Runways and Associated Safety Areas (RESA) would be beneficial to regulators, airport owners, aircraft
operators and airfield engineers. Such a database would be an important tool for risk analysis studies onthe need for improved drainage and safety areas to be part of the mitigating effort of bringing noncompliant runways and safety areas more or in full compliance with international standards and
recommendations.
It is believed that the installation of Engineered Materials Arresting Systems (EMAS) will be a centraltool for achieving this and will be found to be economically beneficial for many of todays non -compliant
airports.
ReseaResea
-
8/2/2019 Airfields Engineering and Asset Main Ten Ace - A Sector Report
4/4
Airfield Engineering Asia
Airfield Engineering and Asset Maintenance 2011 is an evolution of our globally successful series of
strategic airport pavement design and management conferences. This year the conference is growing toexplore other key engineering and maintenance challenges faced by airfield operators, including issues
faced when designing and managing safety systems, lighting, painting, drainage and hangars.Twoconference streams will give you essential updates on:
Compiled by Bryan Camoens & Ed Haines for Airfield Engineering and Asset Maintenance 2011.
For more information on registering for the conference please contact:
Bryan CamoensIQPC Worldwide
Tel: +65 6722 9406Email: [email protected]
Resea
http://www.airfieldengineering.com/Event.aspx?id=412686http://www.airfieldengineering.com/Event.aspx?id=412686http://www.airfieldengineering.com/Event.aspx?id=412686http://www.airfieldengineering.com/Event.aspx?id=412686http://www.airfieldengineering.com/Event.aspx?id=412686http://www.airfieldengineering.com/Event.aspx?id=412686