addendum # 01 request for proposal (rfp) - i.pdf · addendum # 01 request for proposal ... part -...

Date: [17.07.2017]

ADDENDUM # 01 Request for Proposal (RFP)

For “ANNUAL MAINTENANCE OF LANDSIDE CIVIL WORKS DURING THE YEAR 2017-18, 2018-19 & 2019-20. SH: CIVIL WORKS” (hereinafter referred to as the ‘Work/s’) at Kempegowda International Airport, Bengaluru”

Name and address of the entity seeking Proposals: Bangalore International Airport Limited Administration Block Kempegowda International Airport, Bengaluru BENGALURU 560 300 Website: www.bialairport.com Person responsible for any additional information and receipt of Proposals: The General Manager – Procurement and Contracts Bangalore International Airport Limited E-Mail: e&[email protected]

http://www.bialairport.com/

mailto:e&[email protected]

2 of 42

4.8 Addendum/Corrigendum 4.8.1 At any time prior to the closure of the Proposal submission date, BIAL may, for

any reason, shall have the right to modify the RFP by issuing Addendum/Corrigendum. Any Addendum/Corrigendum issued, shall be a part of the RFP pursuant to this Clause, and will be uploaded in the web or communicated in writing by email or by fax to all the prospective bidders.

4.8.2 In order to afford the prospective bidder’s reasonable time to take an

amendment into account, or for any other reason, BIAL may, at its sole discretion, extend the Due Date for submission of the Proposals, in which case, all rights and obligations of BIAL, and the prospective bidder previously subject to the original deadline will thereafter be subject to the extended deadline.

4.8.3 In case of issuance of Addendum/Corrigendum, BIAL may also modify the other

dates in relation to this RFP. 4.8.4 In case, after issuance of Addendum/Corrigendum, the Bidders, who have

already submitted their Proposals, do not resubmit their bids, but can submit the modification, if desired by the Bidder, in accordance with the terms and conditions of this RFP, to the extent of Addendum/Corrigendum, and the same shall be treated as part of already submitted Proposal. If the Bidders, who have already submitted their Proposals, do not modify their bids, pursuant to the Addendum/Corrigendum, it shall be deemed that, such Bidder do not intend to modify their Proposals submitted, on the basis of the Addendum/Corrigendum and the Proposal submitted by such Bidder shall be treated as final Proposal submitted by them.

5. Additional Clause: 1 During this contract period, the finalised contractor for this AMC work shall not mobilise or divert the manpower and other facilities assigned for this AMC work for other contracts awarded during the same period. And also first priority to be given in the deployment of manpower & other facilities to the AMC work. Failing which will consider as deficiency in the AMC work.

3 of 42

ANNEXURE D

Financial Proposal

Part A: DSR Items – Percentage rate to be quoted

FIRST YEAR : 2017-18

Financial Proposal


Sl No .

Description of Item Unit

Value of work expected as per CPWD Delhi Schedule of Rates 2016 (INR)

Percentage above or below

Total Contract Value considering the percentage increase (INR)

PART - A: DSR Items

1 Carriage of Materials 12 Months 25,000.00

2 Earth Work 12 Months 400,000.00

3 Mortar 12 Months 20,000.00

4 Concrete Work 12 Months 1,120,000.00

5 RCC Work 12 Months 600,000.00

6 Brick Work 12 Months 30,000.00

7 Stone Work 12 Months 150,000.00

8 Marble & Granite Work 12 Months 150,000.00

9 Wood & PVC Work 12 Months 750,000.00

10 Steel Work 12 Months 890,000.00

11 Flooring 12 Months 400,000.00

12 Roofing 12 Months 150,000.00

13 Finishing Work 12 Months 1,200,000.00

14 Repairs to Building 12 Months 400,000.00

15 Dismantling & Demolishing 12 Months 50,000.00

16 Road Work 12 Months 350,000.00

17 Sanitary Installation 12 Months 60,000.00

18 Water Supply 12 Months 175,000.00

19 Drainage 12 Months 60,000.00

20 Pile Work 12 Months 15,000.00

21 Aluminum Work 12 Months 300,000.00

22 Water proofing 12 Months 200,000.00

23

Structural Glazing and Aluminium Composite panel 12 Months 100,000.00

Grand Total:

4 of 42

SECOND YEAR : 2018-19

Financial Proposal


Sl No .





PART - A: DSR Items










10 Steel Work 12 Months 979,000.00













23


Grand Total:

5 of 42

THIRD YEAR : 2019-20

Financial Proposal


Sl No .





PART - A: DSR Items










10 Steel Work 12 Months 1,068,000.00













23


Grand Total:

For DSR 2016 (vol.1 & vol.2) items please refer the below mentioned hyper link, http://www.cpwd.gov.in/Publication/DSR_Book%20Vol_1_2016_(English_Version)_Final.pdf http://www.cpwd.gov.in/Publication/DSR_Book_Vol_2_2016_(English%20Version)_Final.pdf

http://www.cpwd.gov.in/Publication/DSR_Book%20Vol_1_2016_(English_Version)_Final.pdf

http://www.cpwd.gov.in/Publication/DSR_Book_Vol_2_2016_(English%20Version)_Final.pdf

6 of 42

Part B: Miscellaneous items – Item rates to be quoted


For First Year - 2017-18

Sl. No.

Description of Item Unit Qty Rate(INR) Amount(INR)

10

Providing and fixing Weld mesh over structural steel work including cutting, hoisting, fixing in position and applying approved steel primer all complete.

Kg 300.00

20

Providing and fixing GI chain link mesh over structural steel work including cutting, hoisting, fixing in position all complete.

100.00

30

Providing & constructing 200mm thick block masonry walls in cement mortar of proportion 1:6 (1 cement: 6 sieved & approved sand), for super-structure using solid concrete blocks of size 400 x 200 x 200mm, of approved quality blocks as per IS: 2185 (Part I) - 1979 including necessary scaffolding, raking of joints, finishing, curing etc., complete with all lead & lift for all materials & labour and as directed.

Cum 20.00

40

Providing & constructing 100mm thick block masonry partition walls in cement mortar of proportion 1:4 (1 cement: 4 sieved & approved sand), for super-structure using solid concrete blocks of size 400 x 100 x 200mm, of approved quality blocks as per IS: 2185 (Part I) - 1979 including necessary scaffolding, raking of joints, finishing, curing etc., complete with all lead & lift for all materials & labour and as directed.

Sqm 20.00

50

Dismantling, racking of mortar and reusing of Solid concrete blocks with cement mortar of proportion 1:4 (1 cement: 4 sieved & approved sand), for super-structure.

Cum 5.00

7 of 42

60

Supply and fixing of approved make Aluminuim composite panel consisting of 4mm thermoplastic core of LDPE sandwiched between “real guage” 2 skins of 0.3thick aluminum sheets making a total panel thickness 4mm. The surface will be finished with PVDF Kynar 500 70% resin based coating on top sides and service coat on the bottom skin. The frame should be of aluminum with 50x25x1.5mm box section, semi angles of 25x25x2mm thick fixed with suitable interval, and silicon sealant in between panels will be done using DOW CORNING (789) ULTRA PROOF weather proof sealant.

Sqm 10.00

70 Taking out the damaged interlock paver blocks/tiles and relaying including providing and spreading river sand.

70a With supply and fixing new Paver block Sqm 100.00

70b with existing paver block Sqm 250.00

80

Removing and relaying of Lavender blue granite tile of 18mm thick flooring in CM 1:3 of 20mm thk including removing mortor and disposal of rubbish to the specified dumping point out side of PTB

Sqm 150.00

90 Removing and refixing of lamination on Flush Doors including removing and refixing of the shutters.

90a 1mm thick laminate Sqm 75.00

90b 1.5mm thick laminate Sqm 75.00

100

Removing and refixing of Mega white / Salt and Pepper 602 shine prem / Salt and Pepper 605 BL GI shine prem - Euro Vitrefied tiles 600 X 600 laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigmetns etc. complete.

Sqm 30.00

110

Removing and refixing of Perlino - Naveen Vitrefied tiles 600 X 600 laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigmetns etc. complete.

Sqm 80.00

8 of 42

120

Breaking and removing the damaged precast B/wall pannel of size 2.85mX1.5mX7cm, chseling the column sides for clearing the earlier bonding material for preparation surface to insert the new panel, arranging genset for concrete breakers, placing of wall panel with help of deptl crane, transportation of materials with help of tractor etc all complete with finishing of joints with Nitto bond bonding emulsion and admixture.

Job 15.00

130

Removal of broken glass panel and Installation of Double glazed glass panel of maximum size of 3200 x 1800mm and up to a height of 16m and weight of 600 kgs including all tools and tackle, consumables like Sealant, Screws, Tapes etc. (Glass panel will be provided by BIAL

Nos 10.00

140

Removal of broken glass panel and Installation of Double glazed glass panel of maximum size of 2800 x 1600mm and up to a height of 10m and weight of 600 kgs including all tools and tackle, consumables like Sealant, Screws, Tapes etc. (Glass panel will be provided by BIAL)

Nos 10.00

150

Providing and installing scaffolding/staging using casuarina poles of min. diameter 100mm including consumables for tying and necessary ties/braces capable to carry safely all loads encountered during installation of galss panel up to a height of 16m.

Sqm 900.00

160a

Clear toughened glass 12mm thk of reputed make such as Saint Gobain/Asahi, etc Fixing only with necessary, selant, tools etc. complete

Sqm 20.00

160b Providing and fixing of Clear toughened glass 12mm thk of reputed make such as Saint Gobain/Asahi, etc

Sqm 2.52

170a

Clear toughened glass 10mm thk of reputed make such as Saint Gobain/Asahi, etc Fixing only with necessary, selant, tools etc. complete

Sqm 10.00


Sqm 1.00

9 of 42

180

Supply and fixing of Clear toughened glass 8mm thk of reputed make such as Saint Gobain/Asahi, etc with necessary, selant, tools etc. complete

Sqm 10.00

190

Providing and fixing of Laminated glass of 13.52mm (6mm CTG + 1.52mmC-PVB + 6mm CTG) using glass of reputed make such as Saint Gobain/Asahi, etc and Poly vinyl bond of superior make and specified thickness.

Sqm 5.00

200

Providing and fixing of Clear toughened Laminated glass of 15.52mm (8mm CTG + 1.52mmC-PVB + 6mm CTG) using glass of reputed make such as Saint Gobain/Asahi, etc and Poly vinyl bond of superior make and specified thickness.

Sqm 10.00

210

Providing and fixing of 15.52mm Thk. Green tinted Laminated toughened Glass (6mm Thk. Green tinted toughened glass+1.52mm PVB+8mm Thk. Clear toughened glass) using glass of reputed make such as Saint Gobain/Asahi, etc and Poly vinyl bond of superior make and specified thickness.

Sqm 10.00

220

Providing and fixing of 14.76mm Thk. Clear, Laminated toughened Glass (6mm Thk. Green tinted toughened glass+0.76mm PVB+8mm Thk. Clear toughened glass)

Sqm 5.00

230

Providing and fixing of 10.76mm thick laminated glass with two lites of 5mm thk heat strengthened glass with 0.76mm white opaquePVB interlayer fixed with patch fittings.

Sqm 5.00

240

Providing and fixing of 10.76mm thk. Green tinted laminated glass (5mm Green tinted Heat Strengthened Glass +0.76 PVB+5mm clear HS glass)+16mm air gap+8mm thk. Clear h/s glass

Sqm 5.00

250

Providing and fixing of 35.52 mm Insulating glass Unit (6 mm clear H S +1.52 CPVB + 6mm clear Heat strengthened Hight performance SKN165 SGI with Coating on Side 4) + 16mm air gap+8mm thick. Clear toughened glass silver spacer +6mm HS glass

Sqm 12.00

10 of 42

260

Providing and fixing of DG tntd -OT-35.14mm DGU of overall thickness 35.14mm-11.14mm thick. Green tinted laminated glass (5mm Green tinted Heat strenghtened glass +1.14 PVB + 5mm clear Heat strengthened glass) + + 14mm air gap+8mm thick. Clear toughened glass

Sqm 12.00

270 Providing and fixing of DGU 21mm -(6mm THK CTG +10mm Air Gap +5mm CTG) with necessary

Sqm 2.52

280

Providing and fixing of 14mm thk laminated glass, Single glazed unit (6mm CT Glass +1.52mm PVB + 6mm CTG) using glass of reputed make such as Saint Gobain/Asahi, etc and Poly vinyl bond of superior make and specified thickness.

Sqm 2.52

290 Providing and Fixing of Laminated glass of 13.52mm (6mm CTG + 1.52mmC-PVB + 6mm CTG)

Sqm 2.52

300 Providing and fixing of 24.76mm- (8mm+0.38PVB+8mm+0.038PVB+8mm ) including hols

Sqm 2.52

310

Providing and fixing of Anodized alumn DG tntd Window-OT-26.76mm DGU of overall thickness 26.76mm Green tinted laminated glass comprising of 6mm Green tinted toughened glass + 12mm Air gap + Laminated glass of 8.76mm thk (4mm heat strengthened glass + 0.76mm clear PVB + 4mm thick heat strenghtened glass)

Sqm 5.00

320 Fixing of Laminated glass of 13.52mm (6mm CTG + 1.52mmC-PVB + 6mm CTG)

Sqm 19.00

330

fixing of 35.52 mm Insulating glass Unit (6 mm clear H S +1.52 CPVB + 6mm clear Heat strengthened Hight performance SKN165 SGI with Coating on Side 4) + 16mm air gap+8mm thick. Clear toughened glass silver spacer +6mm HS glass

Sqm 28.00

340

fixing of DG tntd -OT-35.14mm DGU of overall thickness 35.14mm-11.14mm thick. Green tinted laminated glass (5mm Green tinted Heat strenghtened glass +1.14 PVB + 5mm clear Heat strengthened glass) + + 14mm air gap+8mm thick. Clear toughened glass

Sqm 35.00

11 of 42

350 fixing of DGU 21mm -(6mm THK CTG +10mm Air Gap +5mm CTG) with necessary

Sqm 15.00

360

fixing of 14mm thk laminated glass, Single glazed unit (6mm CT Glass +1.52mm PVB + 6mm CTG) using glass of reputed make such as Saint Gobain/Asahi, etc and Poly vinyl bond of superior make and specified thickness.

Sqm 5.00

370 fixing of 24.76mm- (8mm+0.38PVB+8mm+0.038PVB+8mm ) including hols

Sqm 12.00

380 Fixing of 15.52mm Thk. Glass (6mm Thk. Green tinted toughened glass+1.52mm PVB+8mm Thk. Clear toughened glass)

Sqm 70.00

390 Fixing of 14mm thick laminated glass Sqm 8.00

400

Fixing of Anodized alumn DG tntd Window-OT-26.76mm DGU of overall thickness 26.76mm Green tinted laminated glass

Sqm 15.00

410 12mm holes Ea 10.00

420 15mm hole Ea 8.00

430 20mm holes Ea 10.00

440

Providing and fixing of rubber road humps(matching the existing humps at MAR) with Anchor bolts for the Road humps

Rmt 20.00

450 Slab / Road Core Cutting of 6 inch dia Nos 5.00

460

Random rubble massonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 corse sand : 12 grade stone aggregate 20mm nominal size) as plinth level with : head wall etc. all complete as per the direction of BIAL

Cum 15.00

470 Providing and Laying of Sand Cum 6.00

480 Providing and fixing of Sun Control Film of approved specifications

Sqm 122.00

490 Providing and fixing of frosted film of approved specs

Sqm 20.00

12 of 42

500

Dismantling the existing damaged mirror, shifting the same to the designated loation in BIA, providing and fixing new 8mm thick saint gobain or equivalent make mirror using 3M make double sided tape and applying sealant as per the site condition and finishing the same, inlcuding the cost of transportation, labour, grinding, consumables etc.complete.

Sqm 15.00

510

Providing and applying hot sealant for the road cracks, including cost of material, consumables, labour, transportation etc.complete.

Rmt 620.00

520

Providing and fixing 60mm dia GI pipe as guard rails including necessary base plate and anchor bolts for fixing, including enamel painting the surface, consumables, transportation, tools & tackles, welding and required manpower etc.complete.

Rmt 15.00

530

Removing and re-fixing GI pipe guard rails after repair works including necessary base plate and anchor bolts for fixing, including enamel painting the surface, consumables, transportation, tools & tackles, welding and required manpower etc.complete.

Rmt 20.00

540

Providing and laying of Granular Sub Base (GSB) including the transportation, laying, compacting using compactor/manually, including all necessary manpower, consumables, tools and tackles etc.complete.

Cum 10.00

550

Providing and laying of Wet Mix Macadam(WMM) including the transportation, laying, compacting using compactor/manually, including all necessary manpower, consumables, tools and tackles etc.complete.

Cum 10.00

560

Providing and laying 40mm down size jelly mixed and compacting the same including the material, labour, tools and tackles etc.complete.

Cum 10.00

570

Scarifying the existing surface, brushing & cleaning with air compressor including cutting groves at transverses joining and proper edge cutting longitudinal joints

Sqm 50.00

13 of 42

580

Providing and laying tack coat of hot straight run bitumen of 80/100 grade including cleaning the surface with brushes etc. Complete as per specification and direction of engineer-in -charge, hot applied tack coat Application of the tack coat at the rate of 0.6Kg/Sqrm using mechanical means complete as per specification : MORTH specification section 502, including all necessary tools & tackles, consumables, manpower etc.complete.

Sqm 98.00

590

Providing and laying hot mix dense asphaltic concrete using crushed stone aggregates of quality, size and grading as specified and bitumen, in proportion as per approved job mix formula and laid to specified levels, grade and solve as directed by engineer-in-charge adequate capacity to achieve specified values of compaction, strength and surface accuracy values of compaction, strength and surface accuracy complete ( for tendering purpose bitumen content shall be taken as 135 kg per sqm of mix), Laying of the Asphalt as corrective course using paver finisher with sensor, vibro max roller etc. to achieve desired compaction as per MORTH specification clause 500.5 complete in all respects including manpower, tools & tackles and all consumables etc.complete.

Cum 10.00

600

Application of Bitumen sealant on joints of the asphalt works, including labours, tools & tackles, consumables etc.complete.

Rmt 100.00

610

Repair works to dustbins at landside., i.e. dismantling/Cutting, grinding, welding, finishing & fixing at site including Shiftting of dustbin from site to workshop with labour & Transport and refixing of the dustbins at original location etc.complete.

EA 10.00

620

Repairs to SS dustbins including supplying of SS pipe for dustbin including cutting, welding, grinding and fixing at site with all labours & materials complete work.

EA 10.00

14 of 42

630

Repair and re-fixing of SS chairs including dismantling/Cutting, grinding, welding, finishing & fixing at site including Siftting of SS chairs from site to workshop with labour & Transport after repairing of chairs fixing at site with anchor fastner.

EA 10.00

640

Repairs to Road shoulder Crash guard - dismantling/Cutting, grinding, Stretching, finishing & fixing at site including Shiftting of guard rails from site to workshop with labour & Transport after repairing of guard rails, fixing at site with Nut bolt.

Rmt 20.00

650

Rolling Shutter repair works - dismantling and refixing of gear rolling shutter after repairs of gear part and full service.

EA 2.00

660

Repair of the existing window blinds with replacement of spares and accessories and making it completely serviceableetc.complete.

Sqm 5.00

670

Providing & Fixing of Nylon wheel 8''x2'' for the road / traffic barricades, including necessary fabrication work, etc.complete.

EA 50.00

680

Supplying and fixing retro-reflective signage stickers for the road sign boards including removal of the old sticker and fixing of new sticker etc.complete.

Sqm 9.00

690

Providing and applying thermoplastic paint markings on the Road as per the standards including material, labour, equipments etc.complete.

Sqm 100.00

700

Providing and fixing of Vertical Blinds of make: Vista lavelar, in "Selec" range, made of special fabric 100mm wide including all channels, tilting machanism etc.. and all standard fittings and fixtures etc.complete.

Sqm 20.00

710

Erection of Butterfly Valves PN10 flanged end, HDPE Flange Adaptor (Stub end) and blind flange for each valve as per specification & approved make (Kranti make / equivalent make):

710A 160 dia (150mm) EA 10.00

710B 140 dia (150mm) EA 6.00

710A 110 dia (100mm) EA 10.00

710B 90 dia EA 10.00

15 of 42

710A 75 dia EA 5.00

720

Providing and fixing of cement tiles matching the tiles at the PTB curb area, including necessary cement mortor and finishing the same, etc.complete.

Sqm 5.00

730

Providing and fixing of Stainless Steel electrical floor junction plates matching the specification of the existing plates at PTB and other landside buildings, etc.complete.

EA 8.00

740

Providing and fixing of the poly carbonate sheets of 4 to 6mm including necessary self threading screws edge angles etc.complete.

Sqm 5.00

750 Wood polishing Sqm 50.00

760 Ladish frishking boot EA 10.00

770 SS railing repair PTB Rmt 50.00

780 Generator Day 4.00

790 Sunshade poltcabonite sheet Sqm 15.00

800 PU paint PTB Sqm 70.00

810 Water mtr 2'' EA 10.00

820 Water mtr 1.5'' EA 15.00

830 Sofa cloth change Sqm 10.00

840 Sofa leather Sqm 10.00

850

Providing and fixing up to 110mm Dia PVC pipeline of 6kg/Cm2 pressure, either Supreme or Prince make PVC pipe with necessary fittings(bends, union, clean out plugs, floor traps, 'P' traps(3 nos.) etc…, all necessary fittings) as a drain line etc.complete.

Rmt 30.00

860 P&F 12mm Dia & 6 inch anchor bolt EA 20.00

870

SS bins welding work including necessary transportation, consumables, manpower, tools & tackles etc.complete.

EA 20.00

880 Providing and fixing of SS two way swing hinges etc.complete.

EA 10.00

890 Providing and fixing of SS sensor plates for the urinal sensors etc.complete.

EA 20.00

900 Providing and fixing of vinyl flooring up to 2.4 mm thick of approved make and colour etc. complete.

Sqm 30.00

Part B - TOTAL

16 of 42


For Second Year - 2018-19

Sl No


10


Kg 300.00

20 Providing and fixing GI chain link mesh over structural steel work including cutting, hoisting, fixing in position all complete.

100.00

30


Cum 20.00

40


Sqm 20.00

50


Cum 5.00

17 of 42

60


Sqm 10.00




80


Sqm 150.00




100


Sqm 30.00

110


Sqm 80.00

18 of 42

120


Job 15.00

130


Nos 10.00

140


Nos 10.00

150


Sqm 900.00

160a Clear toughened glass 12mm thk of reputed make such as Saint Gobain/Asahi, etc Fixing only with necessary, selant, tools etc. complete

Sqm 20.00


Sqm 2.52


Sqm 10.00


Sqm 1.00

19 of 42

180 Supply and fixing of Clear toughened glass 8mm thk of reputed make such as Saint Gobain/Asahi, etc with necessary, selant, tools etc. complete

Sqm 10.00

190


Sqm 5.00

200


Sqm 10.00

210


Sqm 10.00

220


Sqm 5.00

230


Sqm 5.00

240


Sqm 5.00

250


Sqm 12.00

20 of 42

260


Sqm 12.00


Sqm 2.52

280


Sqm 2.52


Sqm 2.52


Sqm 2.52

310


Sqm 5.00


Sqm 19.00

330


Sqm 28.00

340


Sqm 35.00

21 of 42


Sqm 15.00

360


Sqm 5.00


Sqm 12.00


Sqm 70.00


400 Fixing of Anodized alumn DG tntd Window-OT-26.76mm DGU of overall thickness 26.76mm Green tinted laminated glass

Sqm 15.00

410 12mm holes Ea 10.00

420 15mm hole Ea 8.00

430 20mm holes Ea 10.00

440 Providing and fixing of rubber road humps(matching the existing humps at MAR) with Anchor bolts for the Road humps

Rmt 20.00


460


Cum 15.00



Sqm 122.00


Sqm 20.00

22 of 42

500


Sqm 15.00

510 Providing and applying hot sealant for the road cracks, including cost of material, consumables, labour, transportation etc.complete.

Rmt 620.00

520


Rmt 15.00

530


Rmt 20.00

540


Cum 10.00

550


Cum 10.00

560 Providing and laying 40mm down size jelly mixed and compacting the same including the material, labour, tools and tackles etc.complete.

Cum 10.00

570


Sqm 50.00

23 of 42

580


Sqm 98.00

590


Cum 10.00

600 Application of Bitumen sealant on joints of the asphalt works, including labours, tools & tackles, consumables etc.complete.

Rmt 100.00

610


EA 10.00

620


EA 10.00

24 of 42

630


EA 10.00

640


Rmt 20.00

650 Rolling Shutter repair works - dismantling and refixing of gear rolling shutter after repairs of gear part and full service.

EA 2.00

660 Repair of the existing window blinds with replacement of spares and accessories and making it completely serviceableetc.complete.

Sqm 5.00

670 Providing & Fixing of Nylon wheel 8''x2'' for the road / traffic barricades, including necessary fabrication work, etc.complete.

EA 50.00

680 Supplying and fixing retro-reflective signage stickers for the road sign boards including removal of the old sticker and fixing of new sticker etc.complete.

Sqm 9.00

690


Sqm 100.00

700


Sqm 20.00

710


710A 160 dia (150mm) EA 10.00

710B 140 dia (150mm) EA 6.00

710A 110 dia (100mm) EA 10.00

710B 90 dia EA 10.00

25 of 42

710A 75 dia EA 5.00

720


Sqm 5.00

730


EA 8.00

740 Providing and fixing of the poly carbonate sheets of 4 to 6mm including necessary self threading screws edge angles etc.complete.

Sqm 5.00







810 Water mtr 2'' EA 10.00

820 Water mtr 1.5'' EA 15.00



850


Rmt 30.00


870 SS bins welding work including necessary transportation, consumables, manpower, tools & tackles etc.complete.

EA 20.00


EA 10.00


EA 20.00


Sqm 30.00

Part B - TOTAL

26 of 42


For Third Year - 2019-20

Sl No


10


Kg 300.00

20 Providing and fixing GI chain link mesh over structural steel work including cutting, hoisting, fixing in position all complete.

100.00

30


Cum 20.00

40


Sqm 20.00

50


Cum 5.00

27 of 42

60


Sqm 10.00




80


Sqm 150.00




28 of 42

100


Sqm 30.00

110


Sqm 80.00

120


Job 15.00

130


Nos 10.00

29 of 42

140


Nos 10.00

150


Sqm 900.00


Sqm 20.00


Sqm 2.52


Sqm 10.00


Sqm 1.00

180

Supply and fixing of Clear toughened glass 8mm thk of reputed make such as Saint Gobain/Asahi, etc with necessary, selant, tools etc. complete

Sqm 10.00

30 of 42

190


Sqm 5.00

200


Sqm 10.00

210


Sqm 10.00

220


Sqm 5.00

230


Sqm 5.00

240


Sqm 5.00

31 of 42

250


Sqm 12.00

260


Sqm 12.00


Sqm 2.52

280


Sqm 2.52


Sqm 2.52


Sqm 2.52

310


Sqm 5.00

32 of 42


Sqm 19.00

330


Sqm 28.00

340


Sqm 35.00


Sqm 15.00

360


Sqm 5.00


Sqm 12.00


Sqm 70.00


400 Fixing of Anodized alumn DG tntd Window-OT-26.76mm DGU of overall thickness 26.76mm Green tinted laminated glass

Sqm 15.00

410 12mm holes Ea 10.00

420 15mm hole Ea 8.00

430 20mm holes Ea 10.00

33 of 42

440 Providing and fixing of rubber road humps(matching the existing humps at MAR) with Anchor bolts for the Road humps

Rmt 20.00


460


Cum 15.00



Sqm 122.00


Sqm 20.00

500


Sqm 15.00

510 Providing and applying hot sealant for the road cracks, including cost of material, consumables, labour, transportation etc.complete.

Rmt 620.00

520


Rmt 15.00

34 of 42

530


Rmt 20.00

540


Cum 10.00

550


Cum 10.00

560

Providing and laying 40mm down size jelly mixed and compacting the same including the material, labour, tools and tackles etc.complete.

Cum 10.00

570


Sqm 50.00

35 of 42

580


Sqm 98.00

590


Cum 10.00

600 Application of Bitumen sealant on joints of the asphalt works, including labours, tools & tackles, consumables etc.complete.

Rmt 100.00

36 of 42

610


EA 10.00

620


EA 10.00

630


EA 10.00

640


Rmt 20.00

650 Rolling Shutter repair works - dismantling and refixing of gear rolling shutter after repairs of gear part and full service.

EA 2.00

660 Repair of the existing window blinds with replacement of spares and accessories and making it completely serviceableetc.complete.

Sqm 5.00

670 Providing & Fixing of Nylon wheel 8''x2'' for the road / traffic barricades, including necessary fabrication work, etc.complete.

EA 50.00

37 of 42

680

Supplying and fixing retro-reflective signage stickers for the road sign boards including removal of the old sticker and fixing of new sticker etc.complete.

Sqm 9.00

690


Sqm 100.00

700


Sqm 20.00

710


710A 160 dia (150mm) EA 10.00

710B 140 dia (150mm) EA 6.00

710A 110 dia (100mm) EA 10.00

710B 90 dia EA 10.00

710A 75 dia EA 5.00

720


Sqm 5.00

730


EA 8.00

740 Providing and fixing of the poly carbonate sheets of 4 to 6mm including necessary self threading screws edge angles etc.complete.

Sqm 5.00



38 of 42





810 Water mtr 2'' EA 10.00

820 Water mtr 1.5'' EA 15.00



850


Rmt 30.00


870 SS bins welding work including necessary transportation, consumables, manpower, tools & tackles etc.complete.

EA 20.00


EA 10.00


EA 20.00


Sqm 30.00

Part B - TOTAL

39 of 42

Abstract of the total AMC Civil works (Part-A + Part-B)

Sl. No.

ANNUAL MAINTENANCE CONTRACT FOR LAND SIDE CIVIL WORKS DURING YEAR 2017-18, 2018-19 & 2019-20 AT KEMPEGOWDA INTERNATIONAL AIRPORT, BENGALURU. SH: CIVIL WORKS

Amount in Rs.

I First Year : 2017-18

Part - A

Part - B

Sub Total

Add. All applicable taxes

Grand Total for First Year - I

II Second Year : 2018-19

Part - A

Part - B

Sub Total


Grand Total for Second Year - II

III Third Year : 2019-20

Part - A

Part - B

Sub Total


Grand Total for Third Year - III

Grand Total - I + II + III

40 of 42

PART - II

General Conditions of Contract 2. CONTRACT PRICE 2.1 The value of the Contract shall be Rs.[__________] (the “Contract Price”). BIAL shall

make payments within thirty (30) days from the date of receipt of valid invoices from the Contractor. The Contractor shall be deemed to have satisfied itself before entering into the Agreement as to the correctness and sufficiency of the Contract Price to cover all its obligations under and in relation to the Agreement and all matters and things necessary for the proper execution of the Works, whether the same is expressly provided for in this Agreement, or is to be reasonably inferred therefrom, or necessarily incidental thereto. The Contract is “Item rate, re-measurable contract”, and will not be adjusted save, as expressly provided in Clause 2.2 and Clause 2.3 below.

2.2 The Parties hereto agree that, the Contract Price is inclusive and includes, any and all

direct, indirect and ancillary Taxes, charges and costs of whatsoever nature, all profits, licenses, royalties and other fees, the cost of all spare parts, accessories, consumable materials and special tools to be provided hereunder, and export insurance premiums, export licence fees, re-export licence fees and other charges relating to, or arising out of this Agreement, and execution of the Works, and, in each case, all deductions and withholdings therefor. The Contract Price agreed in Clause 2.1 above, is based on the break-up proposals submitted. Any refund or benefit that the Contractor gets after payment of the applicable Taxes, shall be refunded to BIAL, failing which, BIAL shall have the right to make the appropriate deductions from any payment due and payable to the Contractor by BIAL, in addition to other recovery modes that may be available to BIAL, either under law or contract. This right of BIAL to claim such reimbursements, shall survive the termination or expiry of this Agreement.

2.3 The Parties agrees that the Contract Price mentioned in the Schedule is only indicative figure and BIAL will make payment for a Works actually performed and executed by the Contractor. The Contractor shall, on each stage, raise invoice, soon after the completion of each stage of work and submit to BIAL. Along with the invoice, the Contractor shall submit relevant details and all supporting documents, pertaining to that stage and BIAL is entitled to deduct or withhold payments for any discrepancy in the invoice and / or in the supporting documents. It is specifically agreed between the Parties that BIAL will make the payment subject to the work certification by the Authorised Representative and will pay only to the actual work performed and executed by the Contractor. However, in case of any discrepancy, BIAL shall have the right to withhold the payment to that effect and will pay the amount only upon the satisfactory completion/correction or clarification by the Contractor.

2.4 BIAL may withhold or deduct, from the payment of any amount, otherwise payable to the Contractor under this Agreement, and pay on the Contractor’s behalf, such Taxes and other sums, if any, as BIAL may be required to withhold or deduct as provided under the Applicable Law.

2.5 In the event that, the Contractor fails to make payment of any Tax required to be

made by it, BIAL shall make such payment and recover the same by making a claim for indemnity under the provisions of this Agreement.

2.6 The Contract Price shall be paid in accordance with the payment terms and conditions

and the payment milestones as contained in Schedule A

41 of 42

2.7 Without prejudice to any other provision of this Agreement, where, in respect of any Tax, the benefit of any credit is available to the Contractor, BIAL or any other person, the Contractor shall ensure sufficient compliance with the Applicable Laws in relation to such Tax requirements, as would enable BIAL or other person, as the case may be, to avail of such credit to the fullest extent possible, including, where possible, reimbursing the same to BIAL. In the event of change in law at any time, during the Term of this Agreement with regard to payment of goods tax or / and service tax, as a result of which, there is an increase or decrease in the Contract Price, the same shall be made good or recovered by BIAL, to or from the Contractor, as the case may be, on submission of sufficient proof for the same, by the Contractor or BIAL, as the case may be. However, if any dispute arises between BIAL and the Contractor with regard to either the interpretation regarding change in law or calculation of amounts to be paid as goods tax or / and service tax on account of change in law, the interpretation of the auditors / counsels of BIAL shall be final and binding on the Contractor.

12. LIQUIDATED DAMAGES 12.1 If the Contractor fails to complete the Works by the Scheduled Assigned Work

Completion Date, then the Contractor shall forthwith, without any demur, pay BIAL Liquidated Damages calculated at one percent (1%) of the Contract Price per week or part thereof, for such default for every week or part of a week (in the event that, the Liquidated Damages are payable for part of a day, the Contractor shall be liable to pay the reasonable proportion pro-rata), which shall elapse between the Scheduled Work Completion Date and the date stated in the Provisional Certificate or Completion Certificate, as being the Completion Date. This right available to BIAL under Clause 12, is in addition to any other right available to BIAL under this Agreement, and under the Applicable Law.

12.2 BIAL shall notify the Contractor in writing, of the amount of the Liquidated Damages

that may have become due. BIAL may deduct and retain the amount of any Liquidated Damages becoming due under Clause 12.1 from any sum due or / and which become due to the Contractor; or / and realise any sum or guarantee provided by the Contractor; or / and require the Contractor to pay such amount to BIAL within 10 (ten) days after receipt of the notice pursuant to Clause 11.1 notwithstanding any dispute between the Parties as to the amount due or the liability to make payment of the same.

12.3 If the payment of the Liquidated Damages is unenforceable by BIAL for any reason, the

Contractor shall be liable to pay BIAL actual losses and costs caused, or to the extent contributed to, by the delay to the Scheduled Project Completion Date for which, the Contractor is responsible, save that, BIAL shall not be entitled to recover under this Clause, any sum, which is greater than the amount, which would have been recoverable as the Liquidated Damages, had the same not been unenforceable.

12.4 If BIAL’s Representative grants, under Clause 11, any extension of time or further

extension of time, which would result in a change in the Scheduled Project Completion Date, he shall re-calculate the amount of any Liquidated Damage to which, BIAL is entitled, and shall forthwith, notify BIAL and the Contractor of the amount thereof, if any, or of any adjustment applicable to any such amount already notified, as the case may be. In-so-far-as any sum shall thereby be payable, by way of adjustment or otherwise, by the Contractor to BIAL, the Contractor shall within 30 (thirty) days of BIAL’s Representative’s notice, pay the same to BIAL.

12.5. The Contractor’s liability under Clause 12, shall be limited to 10% (ten percent) of the

Contract Price.

42 of 42

12.6 If the contractor failed to execute or delayed or not initiated the process within the given timeline for any of the items in the contract, for which the delay attributable to contractor’s scope shall be considered under this Clause 12 and LD shall be applicable and shall be recovered from the monthly bill.

PART - III

SCOPE

1. Scope of Work

Scope of work includes the following:

ANNUAL MAINTENANCE CONTRACT FOR LAND SIDE CIVIL WORKS DURING 2017-18, 2018-19 & 2019-20 AT KEMPEGOWDA INTERNATIONAL AIRPORT, BENGALURU – SH: WORKS. As per BOQ attached.

addendum # 01 request for proposal (rfp) - i.pdf · addendum # 01 request for proposal ... part -...

Documents